aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--block.h2
-rw-r--r--block/qcow2-cluster.c16
-rw-r--r--block/raw-posix.c3
-rw-r--r--block/vvfat.c26
-rw-r--r--hw/scsi-disk.c90
-rw-r--r--qemu-img.c3
6 files changed, 105 insertions, 35 deletions
diff --git a/block.h b/block.h
index db131a3438..5f6438010f 100644
--- a/block.h
+++ b/block.h
@@ -35,7 +35,7 @@ typedef struct QEMUSnapshotInfo {
#define BDRV_O_NO_BACKING 0x0100 /* don't open the backing file */
#define BDRV_O_NO_FLUSH 0x0200 /* disable flushing on this disk */
-#define BDRV_O_CACHE_MASK (BDRV_O_NOCACHE | BDRV_O_CACHE_WB)
+#define BDRV_O_CACHE_MASK (BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH)
#define BDRV_SECTOR_BITS 9
#define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 166922f8be..f562b1602e 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -655,7 +655,7 @@ static int write_l2_entries(BlockDriverState *bs, uint64_t *l2_table,
int ret;
BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE);
- ret = bdrv_pwrite_sync(bs->file, l2_offset + start_offset,
+ ret = bdrv_pwrite(bs->file, l2_offset + start_offset,
&l2_table[l2_start_index], len);
if (ret < 0) {
return ret;
@@ -718,9 +718,17 @@ int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
goto err;
}
- for (i = 0; i < j; i++)
- qcow2_free_any_clusters(bs,
- be64_to_cpu(old_cluster[i]) & ~QCOW_OFLAG_COPIED, 1);
+ /*
+ * If this was a COW, we need to decrease the refcount of the old cluster.
+ * Also flush bs->file to get the right order for L2 and refcount update.
+ */
+ if (j != 0) {
+ bdrv_flush(bs->file);
+ for (i = 0; i < j; i++) {
+ qcow2_free_any_clusters(bs,
+ be64_to_cpu(old_cluster[i]) & ~QCOW_OFLAG_COPIED, 1);
+ }
+ }
ret = 0;
err:
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 72fb8cebd4..0fce449092 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1154,9 +1154,6 @@ static int cdrom_probe_device(const char *filename)
int fd, ret;
int prio = 0;
- if (strstart(filename, "/dev/cd", NULL))
- prio = 50;
-
fd = open(filename, O_RDONLY | O_NONBLOCK);
if (fd < 0) {
goto out;
diff --git a/block/vvfat.c b/block/vvfat.c
index 365332aa21..53e57bf228 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -2665,6 +2665,11 @@ static int vvfat_write(BlockDriverState *bs, int64_t sector_num,
DLOG(checkpoint());
+ /* Check if we're operating in read-only mode */
+ if (s->qcow == NULL) {
+ return -EACCES;
+ }
+
vvfat_close_current_file(s);
/*
@@ -2763,12 +2768,12 @@ static int vvfat_is_allocated(BlockDriverState *bs,
static int write_target_commit(BlockDriverState *bs, int64_t sector_num,
const uint8_t* buffer, int nb_sectors) {
- BDRVVVFATState* s = bs->opaque;
+ BDRVVVFATState* s = *((BDRVVVFATState**) bs->opaque);
return try_commit(s);
}
static void write_target_close(BlockDriverState *bs) {
- BDRVVVFATState* s = bs->opaque;
+ BDRVVVFATState* s = *((BDRVVVFATState**) bs->opaque);
bdrv_delete(s->qcow);
free(s->qcow_filename);
}
@@ -2783,6 +2788,7 @@ static int enable_write_target(BDRVVVFATState *s)
{
BlockDriver *bdrv_qcow;
QEMUOptionParameter *options;
+ int ret;
int size = sector2cluster(s, s->sector_count);
s->used_clusters = calloc(size, 1);
@@ -2798,11 +2804,16 @@ static int enable_write_target(BDRVVVFATState *s)
if (bdrv_create(bdrv_qcow, s->qcow_filename, options) < 0)
return -1;
+
s->qcow = bdrv_new("");
- if (s->qcow == NULL ||
- bdrv_open(s->qcow, s->qcow_filename, BDRV_O_RDWR, bdrv_qcow) < 0)
- {
- return -1;
+ if (s->qcow == NULL) {
+ return -1;
+ }
+
+ ret = bdrv_open(s->qcow, s->qcow_filename,
+ BDRV_O_RDWR | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH, bdrv_qcow);
+ if (ret < 0) {
+ return ret;
}
#ifndef _WIN32
@@ -2811,7 +2822,8 @@ static int enable_write_target(BDRVVVFATState *s)
s->bs->backing_hd = calloc(sizeof(BlockDriverState), 1);
s->bs->backing_hd->drv = &vvfat_write_target;
- s->bs->backing_hd->opaque = s;
+ s->bs->backing_hd->opaque = qemu_malloc(sizeof(void*));
+ *(void**)s->bs->backing_hd->opaque = s;
return 0;
}
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index f43f2d097c..b64dd31463 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -485,16 +485,26 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
return buflen;
}
-static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p)
+static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p,
+ int page_control)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
BlockDriverState *bdrv = s->bs;
int cylinders, heads, secs;
+ /*
+ * If Changeable Values are requested, a mask denoting those mode parameters
+ * that are changeable shall be returned. As we currently don't support
+ * parameter changes via MODE_SELECT all bits are returned set to zero.
+ * The buffer was already menset to zero by the caller of this function.
+ */
switch (page) {
case 4: /* Rigid disk device geometry page. */
p[0] = 4;
p[1] = 0x16;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
/* if a geometry hint is available, use it */
bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs);
p[2] = (cylinders >> 16) & 0xff;
@@ -519,11 +529,14 @@ static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p)
/* Medium rotation rate [rpm], 5400 rpm */
p[20] = (5400 >> 8) & 0xff;
p[21] = 5400 & 0xff;
- return 0x16;
+ return p[1] + 2;
case 5: /* Flexible disk device geometry page. */
p[0] = 5;
p[1] = 0x1e;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
/* Transfer rate [kbit/s], 5Mbit/s */
p[2] = 5000 >> 8;
p[3] = 5000 & 0xff;
@@ -555,21 +568,27 @@ static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p)
/* Medium rotation rate [rpm], 5400 rpm */
p[28] = (5400 >> 8) & 0xff;
p[29] = 5400 & 0xff;
- return 0x1e;
+ return p[1] + 2;
case 8: /* Caching page. */
p[0] = 8;
p[1] = 0x12;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
if (bdrv_enable_write_cache(s->bs)) {
p[2] = 4; /* WCE */
}
- return 20;
+ return p[1] + 2;
case 0x2a: /* CD Capabilities and Mechanical Status page. */
if (bdrv_get_type_hint(bdrv) != BDRV_TYPE_CDROM)
return 0;
p[0] = 0x2a;
p[1] = 0x14;
+ if (page_control == 1) { /* Changeable Values */
+ return p[1] + 2;
+ }
p[2] = 3; // CD-R & CD-RW read
p[3] = 0; // Writing not supported
p[4] = 0x7f; /* Audio, composite, digital out,
@@ -593,7 +612,7 @@ static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p)
p[19] = (16 * 176) & 0xff;
p[20] = (16 * 176) >> 8; // 16x write speed current
p[21] = (16 * 176) & 0xff;
- return 22;
+ return p[1] + 2;
default:
return 0;
@@ -604,29 +623,46 @@ static int scsi_disk_emulate_mode_sense(SCSIRequest *req, uint8_t *outbuf)
{
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
uint64_t nb_sectors;
- int page, dbd, buflen;
+ int page, dbd, buflen, page_control;
uint8_t *p;
+ uint8_t dev_specific_param;
dbd = req->cmd.buf[1] & 0x8;
page = req->cmd.buf[2] & 0x3f;
- DPRINTF("Mode Sense (page %d, len %zd)\n", page, req->cmd.xfer);
+ page_control = (req->cmd.buf[2] & 0xc0) >> 6;
+ DPRINTF("Mode Sense(%d) (page %d, len %d, page_control %d)\n",
+ (req->cmd.buf[0] == MODE_SENSE) ? 6 : 10, page, len, page_control);
memset(outbuf, 0, req->cmd.xfer);
p = outbuf;
- p[1] = 0; /* Default media type. */
- p[3] = 0; /* Block descriptor length. */
if (bdrv_is_read_only(s->bs)) {
- p[2] = 0x80; /* Readonly. */
+ dev_specific_param = 0x80; /* Readonly. */
+ } else {
+ dev_specific_param = 0x00;
+ }
+
+ if (req->cmd.buf[0] == MODE_SENSE) {
+ p[1] = 0; /* Default media type. */
+ p[2] = dev_specific_param;
+ p[3] = 0; /* Block descriptor length. */
+ p += 4;
+ } else { /* MODE_SENSE_10 */
+ p[2] = 0; /* Default media type. */
+ p[3] = dev_specific_param;
+ p[6] = p[7] = 0; /* Block descriptor length. */
+ p += 8;
}
- p += 4;
bdrv_get_geometry(s->bs, &nb_sectors);
- if ((~dbd) & nb_sectors) {
- outbuf[3] = 8; /* Block descriptor length */
+ if (!dbd && nb_sectors) {
+ if (req->cmd.buf[0] == MODE_SENSE) {
+ outbuf[3] = 8; /* Block descriptor length */
+ } else { /* MODE_SENSE_10 */
+ outbuf[7] = 8; /* Block descriptor length */
+ }
nb_sectors /= s->cluster_size;
- nb_sectors--;
if (nb_sectors > 0xffffff)
- nb_sectors = 0xffffff;
+ nb_sectors = 0;
p[0] = 0; /* media density code */
p[1] = (nb_sectors >> 16) & 0xff;
p[2] = (nb_sectors >> 8) & 0xff;
@@ -638,21 +674,37 @@ static int scsi_disk_emulate_mode_sense(SCSIRequest *req, uint8_t *outbuf)
p += 8;
}
+ if (page_control == 3) { /* Saved Values */
+ return -1; /* ILLEGAL_REQUEST */
+ }
+
switch (page) {
case 0x04:
case 0x05:
case 0x08:
case 0x2a:
- p += mode_sense_page(req, page, p);
+ p += mode_sense_page(req, page, p, page_control);
break;
case 0x3f:
- p += mode_sense_page(req, 0x08, p);
- p += mode_sense_page(req, 0x2a, p);
+ p += mode_sense_page(req, 0x08, p, page_control);
+ p += mode_sense_page(req, 0x2a, p, page_control);
break;
+ default:
+ return -1; /* ILLEGAL_REQUEST */
}
buflen = p - outbuf;
- outbuf[0] = buflen - 4;
+ /*
+ * The mode data length field specifies the length in bytes of the
+ * following data that is available to be transferred. The mode data
+ * length does not include itself.
+ */
+ if (req->cmd.buf[0] == MODE_SENSE) {
+ outbuf[0] = buflen - 1;
+ } else { /* MODE_SENSE_10 */
+ outbuf[0] = ((buflen - 2) >> 8) & 0xff;
+ outbuf[1] = (buflen - 2) & 0xff;
+ }
if (buflen > req->cmd.xfer)
buflen = req->cmd.xfer;
return buflen;
diff --git a/qemu-img.c b/qemu-img.c
index d2a978b912..4e035e44cc 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -783,7 +783,8 @@ static int img_convert(int argc, char **argv)
goto out;
}
- out_bs = bdrv_new_open(out_filename, out_fmt, BDRV_O_FLAGS | BDRV_O_RDWR);
+ out_bs = bdrv_new_open(out_filename, out_fmt,
+ BDRV_O_FLAGS | BDRV_O_RDWR | BDRV_O_NO_FLUSH);
if (!out_bs) {
ret = -1;
goto out;
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-23 08:09:33 +0000