aboutsummaryrefslogtreecommitdiff
path: root/target-mips/cpu.h
diff options
context:
space:
mode:
authorLeon Alrae <leon.alrae@imgtec.com>2015-04-14 10:09:38 +0100
committerLeon Alrae <leon.alrae@imgtec.com>2015-06-12 09:05:20 +0100
commite117f52636d04502fab28bd3abe93347c29f39a5 (patch)
treea65867066aff35a198c54440608cf52515587589 /target-mips/cpu.h
parentcd0d45c40133ef8b409aede5ad8a99aeaf6a70fe (diff)
downloadqemu-arm-e117f52636d04502fab28bd3abe93347c29f39a5.tar.gz
target-mips: add CP0.PageGrain.ELPA support
CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Diffstat (limited to 'target-mips/cpu.h')
-rw-r--r--target-mips/cpu.h27
1 files changed, 25 insertions, 2 deletions
diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index 4b81798a18..c266e9ff71 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -224,8 +224,14 @@ struct CPUMIPSState {
uint32_t SEGBITS;
uint32_t PABITS;
+#if defined(TARGET_MIPS64)
+# define PABITS_BASE 36
+#else
+# define PABITS_BASE 32
+#endif
target_ulong SEGMask;
uint64_t PAMask;
+#define PAMASK_BASE ((1ULL << PABITS_BASE) - 1)
int32_t msair;
#define MSAIR_ProcID 8
@@ -289,6 +295,7 @@ struct CPUMIPSState {
int32_t CP0_PageGrain;
#define CP0PG_RIE 31
#define CP0PG_XIE 30
+#define CP0PG_ELPA 29
#define CP0PG_IEC 27
int32_t CP0_Wired;
int32_t CP0_SRSConf0_rw_bitmask;
@@ -518,7 +525,7 @@ struct CPUMIPSState {
#define EXCP_INST_NOTAVAIL 0x2 /* No valid instruction word for BadInstr */
uint32_t hflags; /* CPU State */
/* TMASK defines different execution modes */
-#define MIPS_HFLAG_TMASK 0x35807FF
+#define MIPS_HFLAG_TMASK 0x75807FF
#define MIPS_HFLAG_MODE 0x00007 /* execution modes */
/* The KSU flags must be the lowest bits in hflags. The flag order
must be the same as defined for CP0 Status. This allows to use
@@ -566,6 +573,7 @@ struct CPUMIPSState {
#define MIPS_HFLAG_FBNSLOT 0x800000 /* Forbidden slot */
#define MIPS_HFLAG_MSA 0x1000000
#define MIPS_HFLAG_FRE 0x2000000 /* FRE enabled */
+#define MIPS_HFLAG_ELPA 0x4000000
target_ulong btarget; /* Jump / branch target */
target_ulong bcond; /* Branch condition (if needed) */
@@ -801,6 +809,15 @@ static inline void restore_msa_fp_status(CPUMIPSState *env)
set_flush_inputs_to_zero(flush_to_zero, status);
}
+static inline void restore_pamask(CPUMIPSState *env)
+{
+ if (env->hflags & MIPS_HFLAG_ELPA) {
+ env->PAMask = (1ULL << env->PABITS) - 1;
+ } else {
+ env->PAMask = PAMASK_BASE;
+ }
+}
+
static inline void cpu_get_tb_cpu_state(CPUMIPSState *env, target_ulong *pc,
target_ulong *cs_base, int *flags)
{
@@ -848,7 +865,8 @@ static inline void compute_hflags(CPUMIPSState *env)
env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 |
MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU |
MIPS_HFLAG_AWRAP | MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2 |
- MIPS_HFLAG_SBRI | MIPS_HFLAG_MSA | MIPS_HFLAG_FRE);
+ MIPS_HFLAG_SBRI | MIPS_HFLAG_MSA | MIPS_HFLAG_FRE |
+ MIPS_HFLAG_ELPA);
if (!(env->CP0_Status & (1 << CP0St_EXL)) &&
!(env->CP0_Status & (1 << CP0St_ERL)) &&
!(env->hflags & MIPS_HFLAG_DM)) {
@@ -934,6 +952,11 @@ static inline void compute_hflags(CPUMIPSState *env)
env->hflags |= MIPS_HFLAG_FRE;
}
}
+ if (env->CP0_Config3 & (1 << CP0C3_LPA)) {
+ if (env->CP0_PageGrain & (1 << CP0PG_ELPA)) {
+ env->hflags |= MIPS_HFLAG_ELPA;
+ }
+ }
}
#ifndef CONFIG_USER_ONLY