aboutsummaryrefslogtreecommitdiff
path: root/qga
diff options
context:
space:
mode:
authorPeter Maydell <peter.maydell@linaro.org>2020-02-13 17:56:23 +0000
committerMarkus Armbruster <armbru@redhat.com>2020-02-15 11:41:49 +0100
commita7b6e8964142264f4791fd03f6e5a4756a3fc4af (patch)
tree3b699b2227566b4c4404c83d482c1ee4565ffbe0 /qga
parent883aff68a7d6797a06bac94f631db3439b11a60e (diff)
qga/qapi-schema.json: minor format fixups for rST
We would like to switch the doc comments to rST format, and rST requires a blank line before the start of a bulleted or enumerated list. Two places in qapi-schema.json were missing this blank line. Some places were using an indented line as a sort of single-item bulleted list, which in the Texinfo output comes out all run onto a single line; use a real bulleted list instead. Some places unnecessarily indented lists, which confuses rST. guest-fstrim:minimum's documentation was indented the right amount to share a line with @minimum, but wasn't actually doing so. The indent on the bulleted list in the guest-set-vcpus Returns section meant rST misindented it. Changes to the generated Texinfo are very minor (the new bulleted lists, and a few extra blank lines). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-7-peter.maydell@linaro.org> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
Diffstat (limited to 'qga')
-rw-r--r--qga/qapi-schema.json94
1 files changed, 51 insertions, 43 deletions
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 7661b2b3b4..f6fcb59f34 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -510,8 +510,7 @@
#
# Discard (or "trim") blocks which are not in use by the filesystem.
#
-# @minimum:
-# Minimum contiguous free range to discard, in bytes. Free ranges
+# @minimum: Minimum contiguous free range to discard, in bytes. Free ranges
# smaller than this may be ignored (this is a hint and the guest
# may not respect it). By increasing this value, the fstrim
# operation will complete more quickly for filesystems with badly
@@ -546,7 +545,8 @@
# (or set its status to "shutdown") due to other reasons.
#
# The following errors may be returned:
-# If suspend to disk is not supported, Unsupported
+#
+# - If suspend to disk is not supported, Unsupported
#
# Notes: It's strongly recommended to issue the guest-sync command before
# sending commands when the guest resumes
@@ -575,12 +575,14 @@
#
# This command does NOT return a response on success. There are two options
# to check for success:
-# 1. Wait for the SUSPEND QMP event from QEMU
-# 2. Issue the query-status QMP command to confirm the VM status is
-# "suspended"
+#
+# 1. Wait for the SUSPEND QMP event from QEMU
+# 2. Issue the query-status QMP command to confirm the VM status is
+# "suspended"
#
# The following errors may be returned:
-# If suspend to ram is not supported, Unsupported
+#
+# - If suspend to ram is not supported, Unsupported
#
# Notes: It's strongly recommended to issue the guest-sync command before
# sending commands when the guest resumes
@@ -607,12 +609,14 @@
#
# This command does NOT return a response on success. There are two options
# to check for success:
-# 1. Wait for the SUSPEND QMP event from QEMU
-# 2. Issue the query-status QMP command to confirm the VM status is
-# "suspended"
+#
+# 1. Wait for the SUSPEND QMP event from QEMU
+# 2. Issue the query-status QMP command to confirm the VM status is
+# "suspended"
#
# The following errors may be returned:
-# If hybrid suspend is not supported, Unsupported
+#
+# - If hybrid suspend is not supported, Unsupported
#
# Notes: It's strongly recommended to issue the guest-sync command before
# sending commands when the guest resumes
@@ -767,18 +771,22 @@
# Returns: The length of the initial sublist that has been successfully
# processed. The guest agent maximizes this value. Possible cases:
#
-# - 0: if the @vcpus list was empty on input. Guest state
-# has not been changed. Otherwise,
-# - Error: processing the first node of @vcpus failed for the
-# reason returned. Guest state has not been changed.
-# Otherwise,
-# - < length(@vcpus): more than zero initial nodes have been processed,
-# but not the entire @vcpus list. Guest state has
-# changed accordingly. To retrieve the error
-# (assuming it persists), repeat the call with the
-# successfully processed initial sublist removed.
-# Otherwise,
-# - length(@vcpus): call successful.
+# - 0:
+# if the @vcpus list was empty on input. Guest state
+# has not been changed. Otherwise,
+# - Error:
+# processing the first node of @vcpus failed for the
+# reason returned. Guest state has not been changed.
+# Otherwise,
+# - < length(@vcpus):
+# more than zero initial nodes have been processed,
+# but not the entire @vcpus list. Guest state has
+# changed accordingly. To retrieve the error
+# (assuming it persists), repeat the call with the
+# successfully processed initial sublist removed.
+# Otherwise,
+# - length(@vcpus):
+# call successful.
#
# Since: 1.5
##
@@ -1182,35 +1190,35 @@
# @GuestOSInfo:
#
# @kernel-release:
-# * POSIX: release field returned by uname(2)
-# * Windows: build number of the OS
+# * POSIX: release field returned by uname(2)
+# * Windows: build number of the OS
# @kernel-version:
-# * POSIX: version field returned by uname(2)
-# * Windows: version number of the OS
+# * POSIX: version field returned by uname(2)
+# * Windows: version number of the OS
# @machine:
-# * POSIX: machine field returned by uname(2)
-# * Windows: one of x86, x86_64, arm, ia64
+# * POSIX: machine field returned by uname(2)
+# * Windows: one of x86, x86_64, arm, ia64
# @id:
-# * POSIX: as defined by os-release(5)
-# * Windows: contains string "mswindows"
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "mswindows"
# @name:
-# * POSIX: as defined by os-release(5)
-# * Windows: contains string "Microsoft Windows"
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "Microsoft Windows"
# @pretty-name:
-# * POSIX: as defined by os-release(5)
-# * Windows: product name, e.g. "Microsoft Windows 10 Enterprise"
+# * POSIX: as defined by os-release(5)
+# * Windows: product name, e.g. "Microsoft Windows 10 Enterprise"
# @version:
-# * POSIX: as defined by os-release(5)
-# * Windows: long version string, e.g. "Microsoft Windows Server 2008"
+# * POSIX: as defined by os-release(5)
+# * Windows: long version string, e.g. "Microsoft Windows Server 2008"
# @version-id:
-# * POSIX: as defined by os-release(5)
-# * Windows: short version identifier, e.g. "7" or "20012r2"
+# * POSIX: as defined by os-release(5)
+# * Windows: short version identifier, e.g. "7" or "20012r2"
# @variant:
-# * POSIX: as defined by os-release(5)
-# * Windows: contains string "server" or "client"
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "server" or "client"
# @variant-id:
-# * POSIX: as defined by os-release(5)
-# * Windows: contains string "server" or "client"
+# * POSIX: as defined by os-release(5)
+# * Windows: contains string "server" or "client"
#
# Notes:
#