aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
diff options
context:
space:
mode:
authorMarkus Armbruster <armbru@redhat.com>2013-02-13 19:49:43 +0100
committerAnthony Liguori <aliguori@us.ibm.com>2013-02-18 08:39:48 -0600
commit10adb8be87c315573a5bf9f5bda885f25da28ce6 (patch)
tree1fd3dbc6a6eb2ba63b692c8937c1a26501fed411 /qemu-options.hx
parent84644c451ce7cf8e3cf027501f0f44041f8c6972 (diff)
downloadqemu-arm-10adb8be87c315573a5bf9f5bda885f25da28ce6.tar.gz
doc help: Collect block device stuff under its own heading
Collect them from "Standard options", "File system options", "Virtual File system pass-through options", "Debug/Expert options". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-8-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Diffstat (limited to 'qemu-options.hx')
-rw-r--r--qemu-options.hx572
1 files changed, 281 insertions, 291 deletions
diff --git a/qemu-options.hx b/qemu-options.hx
index 27c9e612a3..4bc9c85d9e 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -103,196 +103,6 @@ Simulate a multi node NUMA system. If mem and cpus are omitted, resources
are split equally.
ETEXI
-DEF("fda", HAS_ARG, QEMU_OPTION_fda,
- "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
-DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
-STEXI
-@item -fda @var{file}
-@item -fdb @var{file}
-@findex -fda
-@findex -fdb
-Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can
-use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}).
-ETEXI
-
-DEF("hda", HAS_ARG, QEMU_OPTION_hda,
- "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL)
-DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL)
-DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
- "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL)
-DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
-STEXI
-@item -hda @var{file}
-@item -hdb @var{file}
-@item -hdc @var{file}
-@item -hdd @var{file}
-@findex -hda
-@findex -hdb
-@findex -hdc
-@findex -hdd
-Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}).
-ETEXI
-
-DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom,
- "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -cdrom @var{file}
-@findex -cdrom
-Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and
-@option{-cdrom} at the same time). You can use the host CD-ROM by
-using @file{/dev/cdrom} as filename (@pxref{host_drives}).
-ETEXI
-
-DEF("drive", HAS_ARG, QEMU_OPTION_drive,
- "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
- " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
- " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
- " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
- " [,readonly=on|off][,copy-on-read=on|off]\n"
- " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n"
- " use 'file' as a drive image\n", QEMU_ARCH_ALL)
-STEXI
-@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
-@findex -drive
-
-Define a new drive. Valid options are:
-
-@table @option
-@item file=@var{file}
-This option defines which disk image (@pxref{disk_images}) to use with
-this drive. If the filename contains comma, you must double it
-(for instance, "file=my,,file" to use file "my,file").
-
-Special files such as iSCSI devices can be specified using protocol
-specific URLs. See the section for "Device URL Syntax" for more information.
-@item if=@var{interface}
-This option defines on which type on interface the drive is connected.
-Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio.
-@item bus=@var{bus},unit=@var{unit}
-These options define where is connected the drive by defining the bus number and
-the unit id.
-@item index=@var{index}
-This option defines where is connected the drive by using an index in the list
-of available connectors of a given interface type.
-@item media=@var{media}
-This option defines the type of the media: disk or cdrom.
-@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
-These options have the same definition as they have in @option{-hdachs}.
-@item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
-@item cache=@var{cache}
-@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
-@item aio=@var{aio}
-@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
-@item format=@var{format}
-Specify which disk @var{format} will be used rather than detecting
-the format. Can be used to specifiy format=raw to avoid interpreting
-an untrusted format header.
-@item serial=@var{serial}
-This option specifies the serial number to assign to the device.
-@item addr=@var{addr}
-Specify the controller's PCI address (if=virtio only).
-@item werror=@var{action},rerror=@var{action}
-Specify which @var{action} to take on write and read errors. Valid actions are:
-"ignore" (ignore the error and try to continue), "stop" (pause QEMU),
-"report" (report the error to the guest), "enospc" (pause QEMU only if the
-host disk is full; report the error to the guest otherwise).
-The default setting is @option{werror=enospc} and @option{rerror=report}.
-@item readonly
-Open drive @option{file} as read-only. Guest write attempts will fail.
-@item copy-on-read=@var{copy-on-read}
-@var{copy-on-read} is "on" or "off" and enables whether to copy read backing
-file sectors into the image file.
-@end table
-
-By default, the @option{cache=writeback} mode is used. It will report data
-writes as completed as soon as the data is present in the host page cache.
-This is safe as long as your guest OS makes sure to correctly flush disk caches
-where needed. If your guest OS does not handle volatile disk write caches
-correctly and your host crashes or loses power, then the guest may experience
-data corruption.
-
-For such guests, you should consider using @option{cache=writethrough}. This
-means that the host page cache will be used to read and write data, but write
-notification will be sent to the guest only after QEMU has made sure to flush
-each write to the disk. Be aware that this has a major impact on performance.
-
-The host page cache can be avoided entirely with @option{cache=none}. This will
-attempt to do disk IO directly to the guest's memory. QEMU may still perform
-an internal copy of the data. Note that this is considered a writeback mode and
-the guest OS must handle the disk write cache correctly in order to avoid data
-corruption on host crashes.
-
-The host page cache can be avoided while only sending write notifications to
-the guest when the data has been flushed to the disk using
-@option{cache=directsync}.
-
-In case you don't care about data integrity over host failures, use
-@option{cache=unsafe}. This option tells QEMU that it never needs to write any
-data to the disk but can instead keep things in cache. If anything goes wrong,
-like your host losing power, the disk storage getting disconnected accidentally,
-etc. your image will most probably be rendered unusable. When using
-the @option{-snapshot} option, unsafe caching is always used.
-
-Copy-on-read avoids accessing the same backing file sectors repeatedly and is
-useful when the backing file is over a slow network. By default copy-on-read
-is off.
-
-Instead of @option{-cdrom} you can use:
-@example
-qemu-system-i386 -drive file=file,index=2,media=cdrom
-@end example
-
-Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
-use:
-@example
-qemu-system-i386 -drive file=file,index=0,media=disk
-qemu-system-i386 -drive file=file,index=1,media=disk
-qemu-system-i386 -drive file=file,index=2,media=disk
-qemu-system-i386 -drive file=file,index=3,media=disk
-@end example
-
-You can open an image using pre-opened file descriptors from an fd set:
-@example
-qemu-system-i386
--add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
--add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
--drive file=/dev/fdset/2,index=0,media=disk
-@end example
-
-You can connect a CDROM to the slave of ide0:
-@example
-qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom
-@end example
-
-If you don't specify the "file=" argument, you define an empty drive:
-@example
-qemu-system-i386 -drive if=ide,index=1,media=cdrom
-@end example
-
-You can connect a SCSI disk with unit ID 6 on the bus #0:
-@example
-qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6
-@end example
-
-Instead of @option{-fda}, @option{-fdb}, you can use:
-@example
-qemu-system-i386 -drive file=file,index=0,if=floppy
-qemu-system-i386 -drive file=file,index=1,if=floppy
-@end example
-
-By default, @var{interface} is "ide" and @var{index} is automatically
-incremented:
-@example
-qemu-system-i386 -drive file=a -drive file=b"
-@end example
-is interpreted like:
-@example
-qemu-system-i386 -hda a -hdb b
-@end example
-ETEXI
-
DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
"-add-fd fd=fd,set=set[,opaque=opaque]\n"
" Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL)
@@ -349,31 +159,6 @@ created automatically by the machine model. To create a device which is not
created automatically and set properties on it, use -@option{device}.
ETEXI
-DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock,
- "-mtdblock file use 'file' as on-board Flash memory image\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -mtdblock @var{file}
-@findex -mtdblock
-Use @var{file} as on-board Flash memory image.
-ETEXI
-
-DEF("sd", HAS_ARG, QEMU_OPTION_sd,
- "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL)
-STEXI
-@item -sd @var{file}
-@findex -sd
-Use @var{file} as SecureDigital card image.
-ETEXI
-
-DEF("pflash", HAS_ARG, QEMU_OPTION_pflash,
- "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL)
-STEXI
-@item -pflash @var{file}
-@findex -pflash
-Use @var{file} as a parallel flash image.
-ETEXI
-
DEF("boot", HAS_ARG, QEMU_OPTION_boot,
"-boot [order=drives][,once=drives][,menu=on|off]\n"
" [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time]\n"
@@ -420,17 +205,6 @@ Note: The legacy format '-boot @var{drives}' is still supported but its
use is discouraged as it may be removed from future versions.
ETEXI
-DEF("snapshot", 0, QEMU_OPTION_snapshot,
- "-snapshot write to temporary files instead of disk image files\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -snapshot
-@findex -snapshot
-Write to temporary files instead of disk image files. In this case,
-the raw disk image you use is not written back. You can however force
-the write back by pressing @key{C-a s} (@pxref{disk_images}).
-ETEXI
-
DEF("m", HAS_ARG, QEMU_OPTION_m,
"-m megs set virtual RAM size to megs MB [default="
stringify(DEFAULT_RAM_SIZE) "]\n", QEMU_ARCH_ALL)
@@ -579,73 +353,250 @@ STEXI
ETEXI
DEFHEADING()
-DEFHEADING(USB options:)
+DEFHEADING(Block device options:)
STEXI
@table @option
ETEXI
-DEF("usb", 0, QEMU_OPTION_usb,
- "-usb enable the USB driver (will be the default soon)\n",
- QEMU_ARCH_ALL)
+DEF("fda", HAS_ARG, QEMU_OPTION_fda,
+ "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
+DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
STEXI
-@item -usb
-@findex -usb
-Enable the USB driver (will be the default soon)
+@item -fda @var{file}
+@item -fdb @var{file}
+@findex -fda
+@findex -fdb
+Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can
+use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}).
ETEXI
-DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice,
- "-usbdevice name add the host or guest USB device 'name'\n",
+DEF("hda", HAS_ARG, QEMU_OPTION_hda,
+ "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL)
+DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL)
+DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
+ "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL)
+DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
+STEXI
+@item -hda @var{file}
+@item -hdb @var{file}
+@item -hdc @var{file}
+@item -hdd @var{file}
+@findex -hda
+@findex -hdb
+@findex -hdc
+@findex -hdd
+Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}).
+ETEXI
+
+DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom,
+ "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n",
QEMU_ARCH_ALL)
STEXI
+@item -cdrom @var{file}
+@findex -cdrom
+Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and
+@option{-cdrom} at the same time). You can use the host CD-ROM by
+using @file{/dev/cdrom} as filename (@pxref{host_drives}).
+ETEXI
-@item -usbdevice @var{devname}
-@findex -usbdevice
-Add the USB device @var{devname}. @xref{usb_devices}.
+DEF("drive", HAS_ARG, QEMU_OPTION_drive,
+ "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
+ " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
+ " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
+ " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
+ " [,readonly=on|off][,copy-on-read=on|off]\n"
+ " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n"
+ " use 'file' as a drive image\n", QEMU_ARCH_ALL)
+STEXI
+@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
+@findex -drive
+
+Define a new drive. Valid options are:
@table @option
+@item file=@var{file}
+This option defines which disk image (@pxref{disk_images}) to use with
+this drive. If the filename contains comma, you must double it
+(for instance, "file=my,,file" to use file "my,file").
-@item mouse
-Virtual Mouse. This will override the PS/2 mouse emulation when activated.
+Special files such as iSCSI devices can be specified using protocol
+specific URLs. See the section for "Device URL Syntax" for more information.
+@item if=@var{interface}
+This option defines on which type on interface the drive is connected.
+Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio.
+@item bus=@var{bus},unit=@var{unit}
+These options define where is connected the drive by defining the bus number and
+the unit id.
+@item index=@var{index}
+This option defines where is connected the drive by using an index in the list
+of available connectors of a given interface type.
+@item media=@var{media}
+This option defines the type of the media: disk or cdrom.
+@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
+These options have the same definition as they have in @option{-hdachs}.
+@item snapshot=@var{snapshot}
+@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
+@item cache=@var{cache}
+@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data.
+@item aio=@var{aio}
+@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO.
+@item format=@var{format}
+Specify which disk @var{format} will be used rather than detecting
+the format. Can be used to specifiy format=raw to avoid interpreting
+an untrusted format header.
+@item serial=@var{serial}
+This option specifies the serial number to assign to the device.
+@item addr=@var{addr}
+Specify the controller's PCI address (if=virtio only).
+@item werror=@var{action},rerror=@var{action}
+Specify which @var{action} to take on write and read errors. Valid actions are:
+"ignore" (ignore the error and try to continue), "stop" (pause QEMU),
+"report" (report the error to the guest), "enospc" (pause QEMU only if the
+host disk is full; report the error to the guest otherwise).
+The default setting is @option{werror=enospc} and @option{rerror=report}.
+@item readonly
+Open drive @option{file} as read-only. Guest write attempts will fail.
+@item copy-on-read=@var{copy-on-read}
+@var{copy-on-read} is "on" or "off" and enables whether to copy read backing
+file sectors into the image file.
+@end table
-@item tablet
-Pointer device that uses absolute coordinates (like a touchscreen). This
-means QEMU is able to report the mouse position without having to grab the
-mouse. Also overrides the PS/2 mouse emulation when activated.
+By default, the @option{cache=writeback} mode is used. It will report data
+writes as completed as soon as the data is present in the host page cache.
+This is safe as long as your guest OS makes sure to correctly flush disk caches
+where needed. If your guest OS does not handle volatile disk write caches
+correctly and your host crashes or loses power, then the guest may experience
+data corruption.
-@item disk:[format=@var{format}]:@var{file}
-Mass storage device based on file. The optional @var{format} argument
-will be used rather than detecting the format. Can be used to specifiy
-@code{format=raw} to avoid interpreting an untrusted format header.
+For such guests, you should consider using @option{cache=writethrough}. This
+means that the host page cache will be used to read and write data, but write
+notification will be sent to the guest only after QEMU has made sure to flush
+each write to the disk. Be aware that this has a major impact on performance.
-@item host:@var{bus}.@var{addr}
-Pass through the host device identified by @var{bus}.@var{addr} (Linux only).
+The host page cache can be avoided entirely with @option{cache=none}. This will
+attempt to do disk IO directly to the guest's memory. QEMU may still perform
+an internal copy of the data. Note that this is considered a writeback mode and
+the guest OS must handle the disk write cache correctly in order to avoid data
+corruption on host crashes.
-@item host:@var{vendor_id}:@var{product_id}
-Pass through the host device identified by @var{vendor_id}:@var{product_id}
-(Linux only).
+The host page cache can be avoided while only sending write notifications to
+the guest when the data has been flushed to the disk using
+@option{cache=directsync}.
-@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev}
-Serial converter to host character device @var{dev}, see @code{-serial} for the
-available devices.
+In case you don't care about data integrity over host failures, use
+@option{cache=unsafe}. This option tells QEMU that it never needs to write any
+data to the disk but can instead keep things in cache. If anything goes wrong,
+like your host losing power, the disk storage getting disconnected accidentally,
+etc. your image will most probably be rendered unusable. When using
+the @option{-snapshot} option, unsafe caching is always used.
-@item braille
-Braille device. This will use BrlAPI to display the braille output on a real
-or fake device.
+Copy-on-read avoids accessing the same backing file sectors repeatedly and is
+useful when the backing file is over a slow network. By default copy-on-read
+is off.
-@item net:@var{options}
-Network adapter that supports CDC ethernet and RNDIS protocols.
+Instead of @option{-cdrom} you can use:
+@example
+qemu-system-i386 -drive file=file,index=2,media=cdrom
+@end example
-@end table
+Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
+use:
+@example
+qemu-system-i386 -drive file=file,index=0,media=disk
+qemu-system-i386 -drive file=file,index=1,media=disk
+qemu-system-i386 -drive file=file,index=2,media=disk
+qemu-system-i386 -drive file=file,index=3,media=disk
+@end example
+
+You can open an image using pre-opened file descriptors from an fd set:
+@example
+qemu-system-i386
+-add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
+-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
+-drive file=/dev/fdset/2,index=0,media=disk
+@end example
+
+You can connect a CDROM to the slave of ide0:
+@example
+qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom
+@end example
+
+If you don't specify the "file=" argument, you define an empty drive:
+@example
+qemu-system-i386 -drive if=ide,index=1,media=cdrom
+@end example
+
+You can connect a SCSI disk with unit ID 6 on the bus #0:
+@example
+qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6
+@end example
+
+Instead of @option{-fda}, @option{-fdb}, you can use:
+@example
+qemu-system-i386 -drive file=file,index=0,if=floppy
+qemu-system-i386 -drive file=file,index=1,if=floppy
+@end example
+
+By default, @var{interface} is "ide" and @var{index} is automatically
+incremented:
+@example
+qemu-system-i386 -drive file=a -drive file=b"
+@end example
+is interpreted like:
+@example
+qemu-system-i386 -hda a -hdb b
+@end example
ETEXI
+DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock,
+ "-mtdblock file use 'file' as on-board Flash memory image\n",
+ QEMU_ARCH_ALL)
STEXI
-@end table
+@item -mtdblock @var{file}
+@findex -mtdblock
+Use @var{file} as on-board Flash memory image.
ETEXI
-DEFHEADING()
-DEFHEADING(File system options:)
+DEF("sd", HAS_ARG, QEMU_OPTION_sd,
+ "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL)
STEXI
-@table @option
+@item -sd @var{file}
+@findex -sd
+Use @var{file} as SecureDigital card image.
+ETEXI
+
+DEF("pflash", HAS_ARG, QEMU_OPTION_pflash,
+ "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL)
+STEXI
+@item -pflash @var{file}
+@findex -pflash
+Use @var{file} as a parallel flash image.
+ETEXI
+
+DEF("snapshot", 0, QEMU_OPTION_snapshot,
+ "-snapshot write to temporary files instead of disk image files\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -snapshot
+@findex -snapshot
+Write to temporary files instead of disk image files. In this case,
+the raw disk image you use is not written back. You can however force
+the write back by pressing @key{C-a s} (@pxref{disk_images}).
+ETEXI
+
+DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
+ "-hdachs c,h,s[,t]\n" \
+ " force hard disk 0 physical geometry and the optional BIOS\n" \
+ " translation (t=none or lba) (usually QEMU can guess them)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
+@findex -hdachs
+Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
+@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
+translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
+all those parameters. This option is useful for old MS-DOS disk
+images.
ETEXI
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
@@ -710,16 +661,6 @@ Specifies the tag name to be used by the guest to mount this export point
ETEXI
-STEXI
-@end table
-ETEXI
-DEFHEADING()
-
-DEFHEADING(Virtual File system pass-through options:)
-STEXI
-@table @option
-ETEXI
-
DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs,
"-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n"
" [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n",
@@ -786,6 +727,70 @@ STEXI
ETEXI
DEFHEADING()
+DEFHEADING(USB options:)
+STEXI
+@table @option
+ETEXI
+
+DEF("usb", 0, QEMU_OPTION_usb,
+ "-usb enable the USB driver (will be the default soon)\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -usb
+@findex -usb
+Enable the USB driver (will be the default soon)
+ETEXI
+
+DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice,
+ "-usbdevice name add the host or guest USB device 'name'\n",
+ QEMU_ARCH_ALL)
+STEXI
+
+@item -usbdevice @var{devname}
+@findex -usbdevice
+Add the USB device @var{devname}. @xref{usb_devices}.
+
+@table @option
+
+@item mouse
+Virtual Mouse. This will override the PS/2 mouse emulation when activated.
+
+@item tablet
+Pointer device that uses absolute coordinates (like a touchscreen). This
+means QEMU is able to report the mouse position without having to grab the
+mouse. Also overrides the PS/2 mouse emulation when activated.
+
+@item disk:[format=@var{format}]:@var{file}
+Mass storage device based on file. The optional @var{format} argument
+will be used rather than detecting the format. Can be used to specifiy
+@code{format=raw} to avoid interpreting an untrusted format header.
+
+@item host:@var{bus}.@var{addr}
+Pass through the host device identified by @var{bus}.@var{addr} (Linux only).
+
+@item host:@var{vendor_id}:@var{product_id}
+Pass through the host device identified by @var{vendor_id}:@var{product_id}
+(Linux only).
+
+@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev}
+Serial converter to host character device @var{dev}, see @code{-serial} for the
+available devices.
+
+@item braille
+Braille device. This will use BrlAPI to display the braille output on a real
+or fake device.
+
+@item net:@var{options}
+Network adapter that supports CDC ethernet and RNDIS protocols.
+
+@end table
+ETEXI
+
+STEXI
+@end table
+ETEXI
+DEFHEADING()
+
DEFHEADING(Display options:)
STEXI
@table @option
@@ -2525,21 +2530,6 @@ STEXI
Output log in @var{logfile} instead of /tmp/qemu.log
ETEXI
-DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \
- "-hdachs c,h,s[,t]\n" \
- " force hard disk 0 physical geometry and the optional BIOS\n" \
- " translation (t=none or lba) (usually QEMU can guess them)\n",
- QEMU_ARCH_ALL)
-STEXI
-@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
-@findex -hdachs
-Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
-@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
-translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
-all those parameters. This option is useful for old MS-DOS disk
-images.
-ETEXI
-
DEF("L", HAS_ARG, QEMU_OPTION_L, \
"-L path set the directory for the BIOS, VGA BIOS and keymaps\n",
QEMU_ARCH_ALL)