aboutsummaryrefslogtreecommitdiff
path: root/qapi-schema.json
diff options
context:
space:
mode:
authorMarkus Armbruster <armbru@redhat.com>2017-08-24 21:14:02 +0200
committerMarkus Armbruster <armbru@redhat.com>2017-09-04 13:09:12 +0200
commitfa988e39bfdb2401cf77f44d45cf46a425c52d03 (patch)
treec4210bf18e526e6452a9b2e4d7f33c3e37fd3a9b /qapi-schema.json
parent48685a8e2c49f082a43cb48e9ca62894f3cc11bf (diff)
downloadqemu-arm-fa988e39bfdb2401cf77f44d45cf46a425c52d03.tar.gz
qapi-schema: Collect transaction stuff in qapi/transaction.json
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-11-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Diffstat (limited to 'qapi-schema.json')
-rw-r--r--qapi-schema.json151
1 files changed, 1 insertions, 150 deletions
diff --git a/qapi-schema.json b/qapi-schema.json
index 21f54ea1a2..4108ef0cc8 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -88,6 +88,7 @@
{ 'include': 'qapi/rocker.json' }
{ 'include': 'qapi/ui.json' }
{ 'include': 'qapi/migration.json' }
+{ 'include': 'qapi/transaction.json' }
{ 'include': 'qapi/event.json' }
{ 'include': 'qapi/trace.json' }
{ 'include': 'qapi/introspect.json' }
@@ -1097,156 +1098,6 @@
{ 'command': 'balloon', 'data': {'value': 'int'} }
##
-# @Abort:
-#
-# This action can be used to test transaction failure.
-#
-# Since: 1.6
-##
-{ 'struct': 'Abort',
- 'data': { } }
-
-##
-# @ActionCompletionMode:
-#
-# An enumeration of Transactional completion modes.
-#
-# @individual: Do not attempt to cancel any other Actions if any Actions fail
-# after the Transaction request succeeds. All Actions that
-# can complete successfully will do so without waiting on others.
-# This is the default.
-#
-# @grouped: If any Action fails after the Transaction succeeds, cancel all
-# Actions. Actions do not complete until all Actions are ready to
-# complete. May be rejected by Actions that do not support this
-# completion mode.
-#
-# Since: 2.5
-##
-{ 'enum': 'ActionCompletionMode',
- 'data': [ 'individual', 'grouped' ] }
-
-##
-# @TransactionAction:
-#
-# A discriminated record of operations that can be performed with
-# @transaction. Action @type can be:
-#
-# - @abort: since 1.6
-# - @block-dirty-bitmap-add: since 2.5
-# - @block-dirty-bitmap-clear: since 2.5
-# - @blockdev-backup: since 2.3
-# - @blockdev-snapshot: since 2.5
-# - @blockdev-snapshot-internal-sync: since 1.7
-# - @blockdev-snapshot-sync: since 1.1
-# - @drive-backup: since 1.6
-#
-# Since: 1.1
-##
-{ 'union': 'TransactionAction',
- 'data': {
- 'abort': 'Abort',
- 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd',
- 'block-dirty-bitmap-clear': 'BlockDirtyBitmap',
- 'blockdev-backup': 'BlockdevBackup',
- 'blockdev-snapshot': 'BlockdevSnapshot',
- 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal',
- 'blockdev-snapshot-sync': 'BlockdevSnapshotSync',
- 'drive-backup': 'DriveBackup'
- } }
-
-##
-# @TransactionProperties:
-#
-# Optional arguments to modify the behavior of a Transaction.
-#
-# @completion-mode: Controls how jobs launched asynchronously by
-# Actions will complete or fail as a group.
-# See @ActionCompletionMode for details.
-#
-# Since: 2.5
-##
-{ 'struct': 'TransactionProperties',
- 'data': {
- '*completion-mode': 'ActionCompletionMode'
- }
-}
-
-##
-# @transaction:
-#
-# Executes a number of transactionable QMP commands atomically. If any
-# operation fails, then the entire set of actions will be abandoned and the
-# appropriate error returned.
-#
-# For external snapshots, the dictionary contains the device, the file to use for
-# the new snapshot, and the format. The default format, if not specified, is
-# qcow2.
-#
-# Each new snapshot defaults to being created by QEMU (wiping any
-# contents if the file already exists), but it is also possible to reuse
-# an externally-created file. In the latter case, you should ensure that
-# the new image file has the same contents as the current one; QEMU cannot
-# perform any meaningful check. Typically this is achieved by using the
-# current image file as the backing file for the new image.
-#
-# On failure, the original disks pre-snapshot attempt will be used.
-#
-# For internal snapshots, the dictionary contains the device and the snapshot's
-# name. If an internal snapshot matching name already exists, the request will
-# be rejected. Only some image formats support it, for example, qcow2, rbd,
-# and sheepdog.
-#
-# On failure, qemu will try delete the newly created internal snapshot in the
-# transaction. When an I/O error occurs during deletion, the user needs to fix
-# it later with qemu-img or other command.
-#
-# @actions: List of @TransactionAction;
-# information needed for the respective operations.
-#
-# @properties: structure of additional options to control the
-# execution of the transaction. See @TransactionProperties
-# for additional detail.
-#
-# Returns: nothing on success
-#
-# Errors depend on the operations of the transaction
-#
-# Note: The transaction aborts on the first failure. Therefore, there will be
-# information on only one failed operation returned in an error condition, and
-# subsequent actions will not have been attempted.
-#
-# Since: 1.1
-#
-# Example:
-#
-# -> { "execute": "transaction",
-# "arguments": { "actions": [
-# { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
-# "snapshot-file": "/some/place/my-image",
-# "format": "qcow2" } },
-# { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
-# "snapshot-file": "/some/place/my-image2",
-# "snapshot-node-name": "node3432",
-# "mode": "existing",
-# "format": "qcow2" } },
-# { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
-# "snapshot-file": "/some/place/my-image2",
-# "mode": "existing",
-# "format": "qcow2" } },
-# { "type": "blockdev-snapshot-internal-sync", "data" : {
-# "device": "ide-hd2",
-# "name": "snapshot0" } } ] } }
-# <- { "return": {} }
-#
-##
-{ 'command': 'transaction',
- 'data': { 'actions': [ 'TransactionAction' ],
- '*properties': 'TransactionProperties'
- }
-}
-
-##
# @human-monitor-command:
#
# Execute a command on the human monitor and return the output.