diff options
author | Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> | 2018-11-09 20:44:36 +0900 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-01-26 09:37:02 +0100 |
commit | 8f472434b860321ffecdda32e30b429ff9e3892c (patch) | |
tree | 318f9700600badaa293097f1d74c31be4c905b41 | |
parent | 85a3e68205d5b7b4c2dce7369964c2721d026d39 (diff) |
usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device
[ Upstream commit ceb94bc52c437463f0903e61060a94a2226fb672 ]
This patch adds a safety connection way for "forced_b_device" with
"workaround_for_vbus" like below:
< Example for R-Car E3 Ebisu >
# modprobe <any usb gadget driver>
# echo 1 > /sys/kernel/debug/ee020000.usb/b_device
(connect a usb cable to host side.)
# echo 2 > /sys/kernel/debug/ee020000.usb/b_device
Previous code should have connected a usb cable before the "b_device"
is set to 1 on the Ebisu board. However, if xHCI driver on the board
is probed, it causes some troubles:
- Conflicts USB VBUS/signals between the board and another host.
- "Cannot enable. Maybe the USB cable is bad?" might happen on
both the board and another host with a usb hub.
- Cannot enumerate a usb gadget correctly because an interruption
of VBUS change happens unexpectedly.
Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-rw-r--r-- | drivers/usb/gadget/udc/renesas_usb3.c | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index ade0723787e5e..e5355ede2c46e 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -352,6 +352,7 @@ struct renesas_usb3 { bool extcon_host; /* check id and set EXTCON_USB_HOST */ bool extcon_usb; /* check vbus and set EXTCON_USB */ bool forced_b_device; + bool start_to_connect; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -470,7 +471,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { usb3_write(usb3, ~0, USB3_USB_INT_STA_1); - usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); + if (!usb3->workaround_for_vbus) + usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); } static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3) @@ -676,8 +678,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) usb3_set_mode(usb3, host); usb3_vbus_out(usb3, a_dev); /* for A-Peripheral or forced B-device mode */ - if ((!host && a_dev) || - (usb3->workaround_for_vbus && usb3->forced_b_device)) + if ((!host && a_dev) || usb3->start_to_connect) usb3_connect(usb3); spin_unlock_irqrestore(&usb3->lock, flags); } @@ -2369,7 +2370,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - if (!strncmp(buf, "1", 1)) + usb3->start_to_connect = false; + if (usb3->workaround_for_vbus && usb3->forced_b_device && + !strncmp(buf, "2", 1)) + usb3->start_to_connect = true; + else if (!strncmp(buf, "1", 1)) usb3->forced_b_device = true; else usb3->forced_b_device = false; @@ -2377,7 +2382,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (usb3->workaround_for_vbus) usb3_disconnect(usb3); - /* Let this driver call usb3_connect() anyway */ + /* Let this driver call usb3_connect() if needed */ usb3_check_id(usb3); return count; |