aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml')
-rw-r--r--Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml20
1 files changed, 10 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
index d6de34f9e6f1..b1a759b3ff81 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
@@ -21,7 +21,7 @@ description: |
devices, so below are in addition to each node's bindings.
properties:
- ti,prus:
+ ti-prus:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: phandles to the PRU, RTU or Tx_PRU nodes used
@@ -30,27 +30,27 @@ properties:
description: |
firmwares for the PRU cores, the default firmware for the core from
the PRU node will be used if not provided. The firmware names should
- correspond to the PRU cores listed in the 'ti,prus' property
+ correspond to the PRU cores listed in the 'ti-prus' property
- ti,pruss-gp-mux-sel:
+ ti-pruss-gp-mux-sel:
$ref: /schemas/types.yaml#/definitions/uint32-array
enum: [0, 1, 2, 3, 4]
description: |
array of values for the GP_MUX_SEL under PRUSS_GPCFG register for a PRU.
This selects the internal muxing scheme for the PRU instance. Values
- should correspond to the PRU cores listed in the 'ti,prus' property. The
+ should correspond to the PRU cores listed in the 'ti-prus' property. The
GP_MUX_SEL setting is a per-slice setting (one setting for PRU0, RTU0,
and Tx_PRU0 on K3 SoCs). Use the same value for all cores within the
same slice in the associative array. If the array size is smaller than
- the size of 'ti,prus' property, the default out-of-reset value (0) for the
+ the size of 'ti-prus' property, the default out-of-reset value (0) for the
PRU core is used.
required:
- - ti,prus
+ - ti-prus
dependencies:
- firmware-name: [ 'ti,prus' ]
- ti,pruss-gp-mux-sel: [ 'ti,prus' ]
+ firmware-name: [ 'ti-prus' ]
+ ti-pruss-gp-mux-sel: [ 'ti-prus' ]
additionalProperties: true
@@ -58,7 +58,7 @@ examples:
- |
/* PRU application node example */
pru-app {
- ti,prus = <&pru0>, <&pru1>;
+ ti-prus = <&pru0>, <&pru1>;
firmware-name = "pruss-app-fw0", "pruss-app-fw1";
- ti,pruss-gp-mux-sel = <2>, <1>;
+ ti-pruss-gp-mux-sel = <2>, <1>;
};