diff options
Diffstat (limited to 'arch/mips/cavium-octeon')
| -rw-r--r-- | arch/mips/cavium-octeon/Kconfig | 17 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/Makefile | 5 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/Platform | 8 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 13 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/octeon-platform.c | 9 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/serial.c | 109 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/setup.c | 32 |
7 files changed, 36 insertions, 157 deletions
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index 75a6df7fd265..227705d9d5ae 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -10,6 +10,10 @@ config CAVIUM_CN63XXP1 non-CN63XXP1 hardware, so it is recommended to select "n" unless it is known the workarounds are needed. +endif # CPU_CAVIUM_OCTEON + +if CAVIUM_OCTEON_SOC + config CAVIUM_OCTEON_2ND_KERNEL bool "Build the kernel to be used as a 2nd kernel on the same chip" default "n" @@ -19,17 +23,6 @@ config CAVIUM_OCTEON_2ND_KERNEL with this option to be run at the same time as one built without this option. -config CAVIUM_OCTEON_HW_FIX_UNALIGNED - bool "Enable hardware fixups of unaligned loads and stores" - default "y" - help - Configure the Octeon hardware to automatically fix unaligned loads - and stores. Normally unaligned accesses are fixed using a kernel - exception handler. This option enables the hardware automatic fixups, - which requires only an extra 3 cycles. Disable this option if you - are running code that relies on address exceptions on unaligned - accesses. - config CAVIUM_OCTEON_CVMSEG_SIZE int "Number of L1 cache lines reserved for CVMSEG memory" range 0 54 @@ -103,4 +96,4 @@ config OCTEON_ILM To compile this driver as a module, choose M here. The module will be called octeon-ilm -endif # CPU_CAVIUM_OCTEON +endif # CAVIUM_OCTEON_SOC diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 3595affb9772..4e952043c922 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -12,11 +12,12 @@ CFLAGS_octeon-platform.o = -I$(src)/../../../scripts/dtc/libfdt CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt -obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o -obj-y += dma-octeon.o flash_setup.o +obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o +obj-y += dma-octeon.o obj-y += octeon-memcpy.o obj-y += executive/ +obj-$(CONFIG_MTD) += flash_setup.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_OCTEON_ILM) += oct_ilm.o diff --git a/arch/mips/cavium-octeon/Platform b/arch/mips/cavium-octeon/Platform index 1e43ccf1a792..8a301cb12d68 100644 --- a/arch/mips/cavium-octeon/Platform +++ b/arch/mips/cavium-octeon/Platform @@ -1,11 +1,11 @@ # # Cavium Octeon # -platform-$(CONFIG_CPU_CAVIUM_OCTEON) += cavium-octeon/ -cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += \ +platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/ +cflags-$(CONFIG_CAVIUM_OCTEON_SOC) += \ -I$(srctree)/arch/mips/include/asm/mach-cavium-octeon ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL -load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff84100000 +load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff84100000 else -load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000 +load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff81100000 endif diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index 7c6497781895..0a1283ce47f5 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -181,6 +181,11 @@ int cvmx_helper_board_get_mii_address(int ipd_port) return ipd_port - 16 + 4; else return -1; + case CVMX_BOARD_TYPE_UBNT_E100: + if (ipd_port >= 0 && ipd_port <= 2) + return 7 - ipd_port; + else + return -1; } /* Some unknown board. Somebody forgot to update this function... */ @@ -706,6 +711,14 @@ int __cvmx_helper_board_hardware_enable(int interface) } } } + } else if (cvmx_sysinfo_get()->board_type == + CVMX_BOARD_TYPE_UBNT_E100) { + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10); } return 0; } diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 389512e2abd6..7b746e7bf7a1 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -490,8 +490,15 @@ int __init octeon_prune_device_tree(void) if (alias_prop) { uart = fdt_path_offset(initial_boot_params, alias_prop); - if (uart_mask & (1 << i)) + if (uart_mask & (1 << i)) { + __be32 f; + + f = cpu_to_be32(octeon_get_io_clock_rate()); + fdt_setprop_inplace(initial_boot_params, + uart, "clock-frequency", + &f, sizeof(f)); continue; + } pr_debug("Deleting uart%d\n", i); fdt_nop_node(initial_boot_params, uart); fdt_nop_property(initial_boot_params, aliases, diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c deleted file mode 100644 index f393f65f3923..000000000000 --- a/arch/mips/cavium-octeon/serial.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004-2007 Cavium Networks - */ -#include <linux/console.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> -#include <linux/tty.h> -#include <linux/irq.h> - -#include <asm/time.h> - -#include <asm/octeon/octeon.h> - -#define DEBUG_UART 1 - -unsigned int octeon_serial_in(struct uart_port *up, int offset) -{ - int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3))); - if (offset == UART_IIR && (rv & 0xf) == 7) { - /* Busy interrupt, read the USR (39) and try again. */ - cvmx_read_csr((uint64_t)(up->membase + (39 << 3))); - rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3))); - } - return rv; -} - -void octeon_serial_out(struct uart_port *up, int offset, int value) -{ - /* - * If bits 6 or 7 of the OCTEON UART's LCR are set, it quits - * working. - */ - if (offset == UART_LCR) - value &= 0x9f; - cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value); -} - -static int octeon_serial_probe(struct platform_device *pdev) -{ - int irq, res; - struct resource *res_mem; - struct uart_8250_port up; - - /* All adaptors have an irq. */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - memset(&up, 0, sizeof(up)); - - up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; - up.port.type = PORT_OCTEON; - up.port.iotype = UPIO_MEM; - up.port.regshift = 3; - up.port.dev = &pdev->dev; - - if (octeon_is_simulation()) - /* Make simulator output fast*/ - up.port.uartclk = 115200 * 16; - else - up.port.uartclk = octeon_get_io_clock_rate(); - - up.port.serial_in = octeon_serial_in; - up.port.serial_out = octeon_serial_out; - up.port.irq = irq; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem == NULL) { - dev_err(&pdev->dev, "found no memory resource\n"); - return -ENXIO; - } - up.port.mapbase = res_mem->start; - up.port.membase = ioremap(res_mem->start, resource_size(res_mem)); - - res = serial8250_register_8250_port(&up); - - return res >= 0 ? 0 : res; -} - -static struct of_device_id octeon_serial_match[] = { - { - .compatible = "cavium,octeon-3860-uart", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, octeon_serial_match); - -static struct platform_driver octeon_serial_driver = { - .probe = octeon_serial_probe, - .driver = { - .owner = THIS_MODULE, - .name = "octeon_serial", - .of_match_table = octeon_serial_match, - }, -}; - -static int __init octeon_serial_init(void) -{ - return platform_driver_register(&octeon_serial_driver); -} -late_initcall(octeon_serial_init); diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 01b1b3f94feb..48b08eb9d9e4 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -7,6 +7,7 @@ * Copyright (C) 2008, 2009 Wind River Systems * written by Ralf Baechle <ralf@linux-mips.org> */ +#include <linux/compiler.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/console.h> @@ -40,12 +41,6 @@ #include <asm/octeon/pci-octeon.h> #include <asm/octeon/cvmx-mio-defs.h> -#ifdef CONFIG_CAVIUM_DECODE_RSL -extern void cvmx_interrupt_rsl_decode(void); -extern int __cvmx_interrupt_ecc_report_single_bit_errors; -extern void cvmx_interrupt_rsl_enable(void); -#endif - extern struct plat_smp_ops octeon_smp_ops; #ifdef CONFIG_PCI @@ -463,18 +458,6 @@ static void octeon_halt(void) } /** - * Handle all the error condition interrupts that might occur. - * - */ -#ifdef CONFIG_CAVIUM_DECODE_RSL -static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id) -{ - cvmx_interrupt_rsl_decode(); - return IRQ_HANDLED; -} -#endif - -/** * Return a string representing the system type * * Returns @@ -712,7 +695,7 @@ void __init prom_init(void) if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) { pr_info("Skipping L2 locking due to reduced L2 cache size\n"); } else { - uint32_t ebase = read_c0_ebase() & 0x3ffff000; + uint32_t __maybe_unused ebase = read_c0_ebase() & 0x3ffff000; #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB /* TLB refill */ cvmx_l2c_lock_mem_region(ebase, 0x100); @@ -996,7 +979,7 @@ void __init plat_mem_setup(void) cvmx_bootmem_unlock(); /* Add the memory region for the kernel. */ kernel_start = (unsigned long) _text; - kernel_size = ALIGN(_end - _text, 0x100000); + kernel_size = _end - _text; /* Adjust for physical offset. */ kernel_start &= ~0xffffffff80000000ULL; @@ -1064,15 +1047,6 @@ void prom_free_prom_memory(void) panic("Core-14449 WAR not in place (%04x).\n" "Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).", insn); } -#ifdef CONFIG_CAVIUM_DECODE_RSL - cvmx_interrupt_rsl_enable(); - - /* Add an interrupt handler for general failures. */ - if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED, - "RML/RSL", octeon_rlm_interrupt)) { - panic("Unable to request_irq(OCTEON_IRQ_RML)"); - } -#endif } int octeon_prune_device_tree(void); |