aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
blob: 61d196e8b3abde6dc0d97e26fe3ca7cae9292957 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
/*
 * Realtek RTL28xxU DVB USB driver
 *
 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
 * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
 * Copyright (C) 2012 Thomas Mair <thomas.mair86@googlemail.com>
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; either version 2 of the License, or
 *    (at your option) any later version.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *    GNU General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License along
 *    with this program; if not, write to the Free Software Foundation, Inc.,
 *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include "rtl28xxu.h"

#include "rtl2830.h"
#include "rtl2832.h"
#include "rtl2832_sdr.h"

#include "qt1010.h"
#include "mt2060.h"
#include "mxl5005s.h"
#include "fc0012.h"
#include "fc0013.h"
#include "e4000.h"
#include "fc2580.h"
#include "tua9001.h"
#include "r820t.h"

static int rtl28xxu_disable_rc;
module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644);
MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);

static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
{
	int ret;
	unsigned int pipe;
	u8 requesttype;
	u8 *buf;

	buf = kmalloc(req->size, GFP_KERNEL);
	if (!buf) {
		ret = -ENOMEM;
		goto err;
	}

	if (req->index & CMD_WR_FLAG) {
		/* write */
		memcpy(buf, req->data, req->size);
		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
		pipe = usb_sndctrlpipe(d->udev, 0);
	} else {
		/* read */
		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
		pipe = usb_rcvctrlpipe(d->udev, 0);
	}

	ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
			req->index, buf, req->size, 1000);

	dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
			req->index, buf, req->size);

	if (ret > 0)
		ret = 0;

	/* read request, copy returned data to return buf */
	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
		memcpy(req->data, buf, req->size);

	kfree(buf);

	if (ret)
		goto err;

	return ret;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
{
	struct rtl28xxu_req req;

	if (reg < 0x3000)
		req.index = CMD_USB_WR;
	else if (reg < 0x4000)
		req.index = CMD_SYS_WR;
	else
		req.index = CMD_IR_WR;

	req.value = reg;
	req.size = len;
	req.data = val;

	return rtl28xxu_ctrl_msg(d, &req);
}

static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
{
	struct rtl28xxu_req req;

	if (reg < 0x3000)
		req.index = CMD_USB_RD;
	else if (reg < 0x4000)
		req.index = CMD_SYS_RD;
	else
		req.index = CMD_IR_RD;

	req.value = reg;
	req.size = len;
	req.data = val;

	return rtl28xxu_ctrl_msg(d, &req);
}

static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
{
	return rtl28xx_wr_regs(d, reg, &val, 1);
}

static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
{
	return rtl2831_rd_regs(d, reg, val, 1);
}

static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
		u8 mask)
{
	int ret;
	u8 tmp;

	/* no need for read if whole reg is written */
	if (mask != 0xff) {
		ret = rtl28xx_rd_reg(d, reg, &tmp);
		if (ret)
			return ret;

		val &= mask;
		tmp &= ~mask;
		val |= tmp;
	}

	return rtl28xx_wr_reg(d, reg, val);
}

/* I2C */
static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
	int num)
{
	int ret;
	struct dvb_usb_device *d = i2c_get_adapdata(adap);
	struct rtl28xxu_priv *priv = d->priv;
	struct rtl28xxu_req req;

	/*
	 * It is not known which are real I2C bus xfer limits, but testing
	 * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes.
	 * TODO: find out RTL2832U lens
	 */

	/*
	 * I2C adapter logic looks rather complicated due to fact it handles
	 * three different access methods. Those methods are;
	 * 1) integrated demod access
	 * 2) old I2C access
	 * 3) new I2C access
	 *
	 * Used method is selected in order 1, 2, 3. Method 3 can handle all
	 * requests but there is two reasons why not use it always;
	 * 1) It is most expensive, usually two USB messages are needed
	 * 2) At least RTL2831U does not support it
	 *
	 * Method 3 is needed in case of I2C write+read (typical register read)
	 * where write is more than one byte.
	 */

	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
		return -EAGAIN;

	if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
		(msg[1].flags & I2C_M_RD)) {
		if (msg[0].len > 24 || msg[1].len > 24) {
			/* TODO: check msg[0].len max */
			ret = -EOPNOTSUPP;
			goto err_mutex_unlock;
		} else if (msg[0].addr == 0x10) {
			/* method 1 - integrated demod */
			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
			req.index = CMD_DEMOD_RD | priv->page;
			req.size = msg[1].len;
			req.data = &msg[1].buf[0];
			ret = rtl28xxu_ctrl_msg(d, &req);
		} else if (msg[0].len < 2) {
			/* method 2 - old I2C */
			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
			req.index = CMD_I2C_RD;
			req.size = msg[1].len;
			req.data = &msg[1].buf[0];
			ret = rtl28xxu_ctrl_msg(d, &req);
		} else {
			/* method 3 - new I2C */
			req.value = (msg[0].addr << 1);
			req.index = CMD_I2C_DA_WR;
			req.size = msg[0].len;
			req.data = msg[0].buf;
			ret = rtl28xxu_ctrl_msg(d, &req);
			if (ret)
				goto err_mutex_unlock;

			req.value = (msg[0].addr << 1);
			req.index = CMD_I2C_DA_RD;
			req.size = msg[1].len;
			req.data = msg[1].buf;
			ret = rtl28xxu_ctrl_msg(d, &req);
		}
	} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
		if (msg[0].len > 22) {
			/* TODO: check msg[0].len max */
			ret = -EOPNOTSUPP;
			goto err_mutex_unlock;
		} else if (msg[0].addr == 0x10) {
			/* method 1 - integrated demod */
			if (msg[0].buf[0] == 0x00) {
				/* save demod page for later demod access */
				priv->page = msg[0].buf[1];
				ret = 0;
			} else {
				req.value = (msg[0].buf[0] << 8) |
					(msg[0].addr << 1);
				req.index = CMD_DEMOD_WR | priv->page;
				req.size = msg[0].len-1;
				req.data = &msg[0].buf[1];
				ret = rtl28xxu_ctrl_msg(d, &req);
			}
		} else if (msg[0].len < 23) {
			/* method 2 - old I2C */
			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
			req.index = CMD_I2C_WR;
			req.size = msg[0].len-1;
			req.data = &msg[0].buf[1];
			ret = rtl28xxu_ctrl_msg(d, &req);
		} else {
			/* method 3 - new I2C */
			req.value = (msg[0].addr << 1);
			req.index = CMD_I2C_DA_WR;
			req.size = msg[0].len;
			req.data = msg[0].buf;
			ret = rtl28xxu_ctrl_msg(d, &req);
		}
	} else {
		ret = -EINVAL;
	}

err_mutex_unlock:
	mutex_unlock(&d->i2c_mutex);

	return ret ? ret : num;
}

static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter)
{
	return I2C_FUNC_I2C;
}

static struct i2c_algorithm rtl28xxu_i2c_algo = {
	.master_xfer   = rtl28xxu_i2c_xfer,
	.functionality = rtl28xxu_i2c_func,
};

static int rtl2831u_read_config(struct dvb_usb_device *d)
{
	struct rtl28xxu_priv *priv = d_to_priv(d);
	int ret;
	u8 buf[1];
	/* open RTL2831U/RTL2830 I2C gate */
	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x08"};
	/* tuner probes */
	struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf};

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	/*
	 * RTL2831U GPIOs
	 * =========================================================
	 * GPIO0 | tuner#0 | 0 off | 1 on  | MXL5005S (?)
	 * GPIO2 | LED     | 0 off | 1 on  |
	 * GPIO4 | tuner#1 | 0 on  | 1 off | MT2060
	 */

	/* GPIO direction */
	ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a);
	if (ret)
		goto err;

	/* enable as output GPIO0, GPIO2, GPIO4 */
	ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
	if (ret)
		goto err;

	/*
	 * Probe used tuner. We need to know used tuner before demod attach
	 * since there is some demod params needed to set according to tuner.
	 */

	/* demod needs some time to wake up */
	msleep(20);

	priv->tuner_name = "NONE";

	/* open demod I2C gate */
	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
	if (ret)
		goto err;

	/* check QT1010 ID(?) register; reg=0f val=2c */
	ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
	if (ret == 0 && buf[0] == 0x2c) {
		priv->tuner = TUNER_RTL2830_QT1010;
		priv->tuner_name = "QT1010";
		goto found;
	}

	/* open demod I2C gate */
	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
	if (ret)
		goto err;

	/* check MT2060 ID register; reg=00 val=63 */
	ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
	if (ret == 0 && buf[0] == 0x63) {
		priv->tuner = TUNER_RTL2830_MT2060;
		priv->tuner_name = "MT2060";
		goto found;
	}

	/* assume MXL5005S */
	priv->tuner = TUNER_RTL2830_MXL5005S;
	priv->tuner_name = "MXL5005S";
	goto found;

found:
	dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl2832u_read_config(struct dvb_usb_device *d)
{
	struct rtl28xxu_priv *priv = d_to_priv(d);
	int ret;
	u8 buf[2];
	/* open RTL2832U/RTL2832 I2C gate */
	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
	/* close RTL2832U/RTL2832 I2C gate */
	struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
	/* tuner probes */
	struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
	struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
	struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf};
	struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf};

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	/* enable GPIO3 and GPIO6 as output */
	ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40);
	if (ret)
		goto err;

	ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48);
	if (ret)
		goto err;

	/*
	 * Probe used tuner. We need to know used tuner before demod attach
	 * since there is some demod params needed to set according to tuner.
	 */

	/* open demod I2C gate */
	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
	if (ret)
		goto err;

	priv->tuner_name = "NONE";

	/* check FC0012 ID register; reg=00 val=a1 */
	ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
	if (ret == 0 && buf[0] == 0xa1) {
		priv->tuner = TUNER_RTL2832_FC0012;
		priv->tuner_name = "FC0012";
		goto found;
	}

	/* check FC0013 ID register; reg=00 val=a3 */
	ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
	if (ret == 0 && buf[0] == 0xa3) {
		priv->tuner = TUNER_RTL2832_FC0013;
		priv->tuner_name = "FC0013";
		goto found;
	}

	/* check MT2266 ID register; reg=00 val=85 */
	ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
	if (ret == 0 && buf[0] == 0x85) {
		priv->tuner = TUNER_RTL2832_MT2266;
		priv->tuner_name = "MT2266";
		goto found;
	}

	/* check FC2580 ID register; reg=01 val=56 */
	ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
	if (ret == 0 && buf[0] == 0x56) {
		priv->tuner = TUNER_RTL2832_FC2580;
		priv->tuner_name = "FC2580";
		goto found;
	}

	/* check MT2063 ID register; reg=00 val=9e || 9c */
	ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
	if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
		priv->tuner = TUNER_RTL2832_MT2063;
		priv->tuner_name = "MT2063";
		goto found;
	}

	/* check MAX3543 ID register; reg=00 val=38 */
	ret = rtl28xxu_ctrl_msg(d, &req_max3543);
	if (ret == 0 && buf[0] == 0x38) {
		priv->tuner = TUNER_RTL2832_MAX3543;
		priv->tuner_name = "MAX3543";
		goto found;
	}

	/* check TUA9001 ID register; reg=7e val=2328 */
	ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
	if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
		priv->tuner = TUNER_RTL2832_TUA9001;
		priv->tuner_name = "TUA9001";
		goto found;
	}

	/* check MXL5007R ID register; reg=d9 val=14 */
	ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
	if (ret == 0 && buf[0] == 0x14) {
		priv->tuner = TUNER_RTL2832_MXL5007T;
		priv->tuner_name = "MXL5007T";
		goto found;
	}

	/* check E4000 ID register; reg=02 val=40 */
	ret = rtl28xxu_ctrl_msg(d, &req_e4000);
	if (ret == 0 && buf[0] == 0x40) {
		priv->tuner = TUNER_RTL2832_E4000;
		priv->tuner_name = "E4000";
		goto found;
	}

	/* check TDA18272 ID register; reg=00 val=c760  */
	ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
	if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
		priv->tuner = TUNER_RTL2832_TDA18272;
		priv->tuner_name = "TDA18272";
		goto found;
	}

	/* check R820T ID register; reg=00 val=69 */
	ret = rtl28xxu_ctrl_msg(d, &req_r820t);
	if (ret == 0 && buf[0] == 0x69) {
		priv->tuner = TUNER_RTL2832_R820T;
		priv->tuner_name = "R820T";
		goto found;
	}

	/* check R828D ID register; reg=00 val=69 */
	ret = rtl28xxu_ctrl_msg(d, &req_r828d);
	if (ret == 0 && buf[0] == 0x69) {
		priv->tuner = TUNER_RTL2832_R828D;
		priv->tuner_name = "R828D";
		goto found;
	}


found:
	dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);

	/* close demod I2C gate */
	ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
	if (ret < 0)
		goto err;

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static const struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.ts_mode = 0,
	.spec_inv = 1,
	.vtop = 0x20,
	.krf = 0x04,
	.agc_targ_val = 0x2d,

};

static const struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.ts_mode = 0,
	.spec_inv = 1,
	.vtop = 0x20,
	.krf = 0x04,
	.agc_targ_val = 0x2d,
};

static const struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.ts_mode = 0,
	.spec_inv = 0,
	.vtop = 0x3f,
	.krf = 0x04,
	.agc_targ_val = 0x3e,
};

static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
{
	struct dvb_usb_device *d = adap_to_d(adap);
	struct rtl28xxu_priv *priv = d_to_priv(d);
	const struct rtl2830_config *rtl2830_config;
	int ret;

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	switch (priv->tuner) {
	case TUNER_RTL2830_QT1010:
		rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
		break;
	case TUNER_RTL2830_MT2060:
		rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
		break;
	case TUNER_RTL2830_MXL5005S:
		rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
		break;
	default:
		dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
				KBUILD_MODNAME, priv->tuner_name);
		ret = -ENODEV;
		goto err;
	}

	/* attach demodulator */
	adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, &d->i2c_adap);
	if (!adap->fe[0]) {
		ret = -ENODEV;
		goto err;
	}

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static const struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.tuner = TUNER_RTL2832_FC0012
};

static const struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.tuner = TUNER_RTL2832_FC0013
};

static const struct rtl2832_config rtl28xxu_rtl2832_tua9001_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.tuner = TUNER_RTL2832_TUA9001,
};

static const struct rtl2832_config rtl28xxu_rtl2832_e4000_config = {
	.i2c_addr = 0x10, /* 0x20 */
	.xtal = 28800000,
	.tuner = TUNER_RTL2832_E4000,
};

static const struct rtl2832_config rtl28xxu_rtl2832_r820t_config = {
	.i2c_addr = 0x10,
	.xtal = 28800000,
	.tuner = TUNER_RTL2832_R820T,
};

static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
		int cmd, int arg)
{
	int ret;
	u8 val;

	dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);

	switch (cmd) {
	case FC_FE_CALLBACK_VHF_ENABLE:
		/* set output values */
		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
		if (ret)
			goto err;

		if (arg)
			val &= 0xbf; /* set GPIO6 low */
		else
			val |= 0x40; /* set GPIO6 high */


		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
		if (ret)
			goto err;
		break;
	default:
		ret = -EINVAL;
		goto err;
	}
	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d,
		int cmd, int arg)
{
	int ret;
	u8 val;

	dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);

	/*
	 * CEN     always enabled by hardware wiring
	 * RESETN  GPIO4
	 * RXEN    GPIO1
	 */

	switch (cmd) {
	case TUA9001_CMD_RESETN:
		if (arg)
			val = (1 << 4);
		else
			val = (0 << 4);

		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10);
		if (ret)
			goto err;
		break;
	case TUA9001_CMD_RXEN:
		if (arg)
			val = (1 << 1);
		else
			val = (0 << 1);

		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02);
		if (ret)
			goto err;
		break;
	}

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg)
{
	struct rtl28xxu_priv *priv = d->priv;

	switch (priv->tuner) {
	case TUNER_RTL2832_FC0012:
		return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
	case TUNER_RTL2832_TUA9001:
		return rtl2832u_tua9001_tuner_callback(d, cmd, arg);
	default:
		break;
	}

	return 0;
}

static int rtl2832u_frontend_callback(void *adapter_priv, int component,
		int cmd, int arg)
{
	struct i2c_adapter *adap = adapter_priv;
	struct dvb_usb_device *d = i2c_get_adapdata(adap);

	dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n",
			__func__, component, cmd, arg);

	switch (component) {
	case DVB_FRONTEND_COMPONENT_TUNER:
		return rtl2832u_tuner_callback(d, cmd, arg);
	default:
		break;
	}

	return 0;
}

static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
{
	int ret;
	struct dvb_usb_device *d = adap_to_d(adap);
	struct rtl28xxu_priv *priv = d_to_priv(d);
	const struct rtl2832_config *rtl2832_config;

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	switch (priv->tuner) {
	case TUNER_RTL2832_FC0012:
		rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
		break;
	case TUNER_RTL2832_FC0013:
		rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
		break;
	case TUNER_RTL2832_FC2580:
		/* FIXME: do not abuse fc0012 settings */
		rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
		break;
	case TUNER_RTL2832_TUA9001:
		rtl2832_config = &rtl28xxu_rtl2832_tua9001_config;
		break;
	case TUNER_RTL2832_E4000:
		rtl2832_config = &rtl28xxu_rtl2832_e4000_config;
		break;
	case TUNER_RTL2832_R820T:
	case TUNER_RTL2832_R828D:
		rtl2832_config = &rtl28xxu_rtl2832_r820t_config;
		break;
	default:
		dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
				KBUILD_MODNAME, priv->tuner_name);
		ret = -ENODEV;
		goto err;
	}

	/* attach demodulator */
	adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap);
	if (!adap->fe[0]) {
		ret = -ENODEV;
		goto err;
	}

	/* RTL2832 I2C repeater */
	priv->demod_i2c_adapter = rtl2832_get_i2c_adapter(adap->fe[0]);

	/* set fe callback */
	adap->fe[0]->callback = rtl2832u_frontend_callback;

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static struct qt1010_config rtl28xxu_qt1010_config = {
	.i2c_address = 0x62, /* 0xc4 */
};

static struct mt2060_config rtl28xxu_mt2060_config = {
	.i2c_address = 0x60, /* 0xc0 */
	.clock_out = 0,
};

static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
	.i2c_address     = 0x63, /* 0xc6 */
	.if_freq         = IF_FREQ_4570000HZ,
	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
	.agc_mode        = MXL_SINGLE_AGC,
	.tracking_filter = MXL_TF_C_H,
	.rssi_enable     = MXL_RSSI_ENABLE,
	.cap_select      = MXL_CAP_SEL_ENABLE,
	.div_out         = MXL_DIV_OUT_4,
	.clock_out       = MXL_CLOCK_OUT_DISABLE,
	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
	.top		 = MXL5005S_TOP_25P2,
	.mod_mode        = MXL_DIGITAL_MODE,
	.if_mode         = MXL_ZERO_IF,
	.AgcMasterByte   = 0x00,
};

static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
{
	int ret;
	struct dvb_usb_device *d = adap_to_d(adap);
	struct rtl28xxu_priv *priv = d_to_priv(d);
	struct i2c_adapter *rtl2830_tuner_i2c;
	struct dvb_frontend *fe;

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
	rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]);

	switch (priv->tuner) {
	case TUNER_RTL2830_QT1010:
		fe = dvb_attach(qt1010_attach, adap->fe[0],
				rtl2830_tuner_i2c, &rtl28xxu_qt1010_config);
		break;
	case TUNER_RTL2830_MT2060:
		fe = dvb_attach(mt2060_attach, adap->fe[0],
				rtl2830_tuner_i2c, &rtl28xxu_mt2060_config,
				1220);
		break;
	case TUNER_RTL2830_MXL5005S:
		fe = dvb_attach(mxl5005s_attach, adap->fe[0],
				rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config);
		break;
	default:
		fe = NULL;
		dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
				priv->tuner);
	}

	if (fe == NULL) {
		ret = -ENODEV;
		goto err;
	}

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static const struct fc2580_config rtl2832u_fc2580_config = {
	.i2c_addr = 0x56,
	.clock = 16384000,
};

static struct tua9001_config rtl2832u_tua9001_config = {
	.i2c_addr = 0x60,
};

static const struct fc0012_config rtl2832u_fc0012_config = {
	.i2c_address = 0x63, /* 0xc6 >> 1 */
	.xtal_freq = FC_XTAL_28_8_MHZ,
};

static const struct r820t_config rtl2832u_r820t_config = {
	.i2c_addr = 0x1a,
	.xtal = 28800000,
	.max_i2c_msg_len = 2,
	.rafael_chip = CHIP_R820T,
};

static const struct r820t_config rtl2832u_r828d_config = {
	.i2c_addr = 0x3a,
	.xtal = 16000000,
	.max_i2c_msg_len = 2,
	.rafael_chip = CHIP_R828D,
};

static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
{
	int ret;
	struct dvb_usb_device *d = adap_to_d(adap);
	struct rtl28xxu_priv *priv = d_to_priv(d);
	struct dvb_frontend *fe = NULL;
	struct i2c_board_info info;
	struct i2c_client *client;

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	memset(&info, 0, sizeof(struct i2c_board_info));

	switch (priv->tuner) {
	case TUNER_RTL2832_FC0012:
		fe = dvb_attach(fc0012_attach, adap->fe[0],
			&d->i2c_adap, &rtl2832u_fc0012_config);

		/* since fc0012 includs reading the signal strength delegate
		 * that to the tuner driver */
		adap->fe[0]->ops.read_signal_strength =
				adap->fe[0]->ops.tuner_ops.get_rf_strength;

		/* attach SDR */
		dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
				&rtl28xxu_rtl2832_fc0012_config, NULL);
		break;
	case TUNER_RTL2832_FC0013:
		fe = dvb_attach(fc0013_attach, adap->fe[0],
			&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);

		/* fc0013 also supports signal strength reading */
		adap->fe[0]->ops.read_signal_strength =
				adap->fe[0]->ops.tuner_ops.get_rf_strength;

		/* attach SDR */
		dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
				&rtl28xxu_rtl2832_fc0013_config, NULL);
		break;
	case TUNER_RTL2832_E4000: {
			struct v4l2_subdev *sd;
			struct i2c_adapter *i2c_adap_internal =
					rtl2832_get_private_i2c_adapter(adap->fe[0]);
			struct e4000_config e4000_config = {
				.fe = adap->fe[0],
				.clock = 28800000,
			};

			strlcpy(info.type, "e4000", I2C_NAME_SIZE);
			info.addr = 0x64;
			info.platform_data = &e4000_config;

			request_module(info.type);
			client = i2c_new_device(priv->demod_i2c_adapter, &info);
			if (client == NULL || client->dev.driver == NULL)
				break;

			if (!try_module_get(client->dev.driver->owner)) {
				i2c_unregister_device(client);
				break;
			}

			priv->client = client;
			sd = i2c_get_clientdata(client);
			i2c_set_adapdata(i2c_adap_internal, d);

			/* attach SDR */
			dvb_attach(rtl2832_sdr_attach, adap->fe[0],
					i2c_adap_internal,
					&rtl28xxu_rtl2832_e4000_config, sd);
		}
		break;
	case TUNER_RTL2832_FC2580:
		fe = dvb_attach(fc2580_attach, adap->fe[0], &d->i2c_adap,
				&rtl2832u_fc2580_config);
		break;
	case TUNER_RTL2832_TUA9001:
		/* enable GPIO1 and GPIO4 as output */
		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12);
		if (ret)
			goto err;

		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12);
		if (ret)
			goto err;

		fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap,
				&rtl2832u_tua9001_config);
		break;
	case TUNER_RTL2832_R820T:
		fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap,
				&rtl2832u_r820t_config);

		/* Use tuner to get the signal strength */
		adap->fe[0]->ops.read_signal_strength =
				adap->fe[0]->ops.tuner_ops.get_rf_strength;

		/* attach SDR */
		dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
				&rtl28xxu_rtl2832_r820t_config, NULL);
		break;
	case TUNER_RTL2832_R828D:
		/* power off mn88472 demod on GPIO0 */
		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x00, 0x01);
		if (ret)
			goto err;

		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
		if (ret)
			goto err;

		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
		if (ret)
			goto err;

		fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap,
				&rtl2832u_r828d_config);

		/* Use tuner to get the signal strength */
		adap->fe[0]->ops.read_signal_strength =
				adap->fe[0]->ops.tuner_ops.get_rf_strength;
		break;
	default:
		dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
				priv->tuner);
	}

	if (fe == NULL && priv->client == NULL) {
		ret = -ENODEV;
		goto err;
	}

	return 0;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl28xxu_init(struct dvb_usb_device *d)
{
	int ret;
	u8 val;

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	/* init USB endpoints */
	ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
	if (ret)
		goto err;

	/* enable DMA and Full Packet Mode*/
	val |= 0x09;
	ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
	if (ret)
		goto err;

	/* set EPA maximum packet size to 0x0200 */
	ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
	if (ret)
		goto err;

	/* change EPA FIFO length */
	ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
	if (ret)
		goto err;

	return ret;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static void rtl28xxu_exit(struct dvb_usb_device *d)
{
	struct rtl28xxu_priv *priv = d->priv;
	struct i2c_client *client = priv->client;

	dev_dbg(&d->udev->dev, "%s:\n", __func__);

	/* remove I2C tuner */
	if (client) {
		module_put(client->dev.driver->owner);
		i2c_unregister_device(client);
	}

	return;
}

static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
	int ret;
	u8 gpio, sys0, epa_ctl[2];

	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);

	/* demod adc */
	ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
	if (ret)
		goto err;

	/* tuner power, read GPIOs */
	ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
	if (ret)
		goto err;

	dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
			sys0, gpio);

	if (onoff) {
		gpio |= 0x01; /* GPIO0 = 1 */
		gpio &= (~0x10); /* GPIO4 = 0 */
		gpio |= 0x04; /* GPIO2 = 1, LED on */
		sys0 = sys0 & 0x0f;
		sys0 |= 0xe0;
		epa_ctl[0] = 0x00; /* clear stall */
		epa_ctl[1] = 0x00; /* clear reset */
	} else {
		gpio &= (~0x01); /* GPIO0 = 0 */
		gpio |= 0x10; /* GPIO4 = 1 */
		gpio &= (~0x04); /* GPIO2 = 1, LED off */
		sys0 = sys0 & (~0xc0);
		epa_ctl[0] = 0x10; /* set stall */
		epa_ctl[1] = 0x02; /* set reset */
	}

	dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
			sys0, gpio);

	/* demod adc */
	ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
	if (ret)
		goto err;

	/* tuner power, write GPIOs */
	ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
	if (ret)
		goto err;

	/* streaming EP: stall & reset */
	ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2);
	if (ret)
		goto err;

	if (onoff)
		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));

	return ret;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
	int ret;

	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);

	if (onoff) {
		/* GPIO3=1, GPIO4=0 */
		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18);
		if (ret)
			goto err;

		/* suspend? */
		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10);
		if (ret)
			goto err;

		/* enable PLL */
		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80);
		if (ret)
			goto err;

		/* disable reset */
		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20);
		if (ret)
			goto err;

		mdelay(5);

		/* enable ADC */
		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x48, 0x48);
		if (ret)
			goto err;

		/* streaming EP: clear stall & reset */
		ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2);
		if (ret)
			goto err;

		ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
		if (ret)
			goto err;
	} else {
		/* GPIO4=1 */
		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10);
		if (ret)
			goto err;

		/* disable ADC */
		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x48);
		if (ret)
			goto err;

		/* disable PLL */
		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80);
		if (ret)
			goto err;

		/* streaming EP: set stall & reset */
		ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2);
		if (ret)
			goto err;
	}

	return ret;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

#if IS_ENABLED(CONFIG_RC_CORE)
static int rtl2831u_rc_query(struct dvb_usb_device *d)
{
	int ret, i;
	struct rtl28xxu_priv *priv = d->priv;
	u8 buf[5];
	u32 rc_code;
	struct rtl28xxu_reg_val rc_nec_tab[] = {
		{ 0x3033, 0x80 },
		{ 0x3020, 0x43 },
		{ 0x3021, 0x16 },
		{ 0x3022, 0x16 },
		{ 0x3023, 0x5a },
		{ 0x3024, 0x2d },
		{ 0x3025, 0x16 },
		{ 0x3026, 0x01 },
		{ 0x3028, 0xb0 },
		{ 0x3029, 0x04 },
		{ 0x302c, 0x88 },
		{ 0x302e, 0x13 },
		{ 0x3030, 0xdf },
		{ 0x3031, 0x05 },
	};

	/* init remote controller */
	if (!priv->rc_active) {
		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
			ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
					rc_nec_tab[i].val);
			if (ret)
				goto err;
		}
		priv->rc_active = true;
	}

	ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5);
	if (ret)
		goto err;

	if (buf[4] & 0x01) {
		if (buf[2] == (u8) ~buf[3]) {
			if (buf[0] == (u8) ~buf[1]) {
				/* NEC standard (16 bit) */
				rc_code = buf[0] << 8 | buf[2];
			} else {
				/* NEC extended (24 bit) */
				rc_code = buf[0] << 16 |
						buf[1] << 8 | buf[2];
			}
		} else {
			/* NEC full (32 bit) */
			rc_code = buf[0] << 24 | buf[1] << 16 |
					buf[2] << 8 | buf[3];
		}

		rc_keydown(d->rc_dev, rc_code, 0);

		ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
		if (ret)
			goto err;

		/* repeated intentionally to avoid extra keypress */
		ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
		if (ret)
			goto err;
	}

	return ret;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
		struct dvb_usb_rc *rc)
{
	rc->map_name = RC_MAP_EMPTY;
	rc->allowed_protos = RC_BIT_NEC;
	rc->query = rtl2831u_rc_query;
	rc->interval = 400;

	return 0;
}

static int rtl2832u_rc_query(struct dvb_usb_device *d)
{
	int ret, i, len;
	struct rtl28xxu_priv *priv = d->priv;
	struct ir_raw_event ev;
	u8 buf[128];
	static const struct rtl28xxu_reg_val_mask refresh_tab[] = {
		{IR_RX_IF,               0x03, 0xff},
		{IR_RX_BUF_CTRL,         0x80, 0xff},
		{IR_RX_CTRL,             0x80, 0xff},
	};

	/* init remote controller */
	if (!priv->rc_active) {
		static const struct rtl28xxu_reg_val_mask init_tab[] = {
			{SYS_DEMOD_CTL1,         0x00, 0x04},
			{SYS_DEMOD_CTL1,         0x00, 0x08},
			{USB_CTRL,               0x20, 0x20},
			{SYS_GPIO_DIR,           0x00, 0x08},
			{SYS_GPIO_OUT_EN,        0x08, 0x08},
			{SYS_GPIO_OUT_VAL,       0x08, 0x08},
			{IR_MAX_DURATION0,       0xd0, 0xff},
			{IR_MAX_DURATION1,       0x07, 0xff},
			{IR_IDLE_LEN0,           0xc0, 0xff},
			{IR_IDLE_LEN1,           0x00, 0xff},
			{IR_GLITCH_LEN,          0x03, 0xff},
			{IR_RX_CLK,              0x09, 0xff},
			{IR_RX_CFG,              0x1c, 0xff},
			{IR_MAX_H_TOL_LEN,       0x1e, 0xff},
			{IR_MAX_L_TOL_LEN,       0x1e, 0xff},
			{IR_RX_CTRL,             0x80, 0xff},
		};

		for (i = 0; i < ARRAY_SIZE(init_tab); i++) {
			ret = rtl28xx_wr_reg_mask(d, init_tab[i].reg,
					init_tab[i].val, init_tab[i].mask);
			if (ret)
				goto err;
		}

		priv->rc_active = true;
	}

	ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]);
	if (ret)
		goto err;

	if (buf[0] != 0x83)
		goto exit;

	ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]);
	if (ret)
		goto err;

	len = buf[0];

	/* read raw code from hw */
	ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
	if (ret)
		goto err;

	/* let hw receive new code */
	for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) {
		ret = rtl28xx_wr_reg_mask(d, refresh_tab[i].reg,
				refresh_tab[i].val, refresh_tab[i].mask);
		if (ret)
			goto err;
	}

	/* pass data to Kernel IR decoder */
	init_ir_raw_event(&ev);

	for (i = 0; i < len; i++) {
		ev.pulse = buf[i] >> 7;
		ev.duration = 50800 * (buf[i] & 0x7f);
		ir_raw_event_store_with_filter(d->rc_dev, &ev);
	}

	/* 'flush' ir_raw_event_store_with_filter() */
	ir_raw_event_set_idle(d->rc_dev, true);
	ir_raw_event_handle(d->rc_dev);
exit:
	return ret;
err:
	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
	return ret;
}

static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
		struct dvb_usb_rc *rc)
{
	/* disable IR interrupts in order to avoid SDR sample loss */
	if (rtl28xxu_disable_rc)
		return rtl28xx_wr_reg(d, IR_RX_IE, 0x00);

	/* load empty to enable rc */
	if (!rc->map_name)
		rc->map_name = RC_MAP_EMPTY;
	rc->allowed_protos = RC_BIT_ALL;
	rc->driver_type = RC_DRIVER_IR_RAW;
	rc->query = rtl2832u_rc_query;
	rc->interval = 400;

	return 0;
}
#else
#define rtl2831u_get_rc_config NULL
#define rtl2832u_get_rc_config NULL
#endif

static const struct dvb_usb_device_properties rtl2831u_props = {
	.driver_name = KBUILD_MODNAME,
	.owner = THIS_MODULE,
	.adapter_nr = adapter_nr,
	.size_of_priv = sizeof(struct rtl28xxu_priv),

	.power_ctrl = rtl2831u_power_ctrl,
	.i2c_algo = &rtl28xxu_i2c_algo,
	.read_config = rtl2831u_read_config,
	.frontend_attach = rtl2831u_frontend_attach,
	.tuner_attach = rtl2831u_tuner_attach,
	.init = rtl28xxu_init,
	.get_rc_config = rtl2831u_get_rc_config,

	.num_adapters = 1,
	.adapter = {
		{
			.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
		},
	},
};

static const struct dvb_usb_device_properties rtl2832u_props = {
	.driver_name = KBUILD_MODNAME,
	.owner = THIS_MODULE,
	.adapter_nr = adapter_nr,
	.size_of_priv = sizeof(struct rtl28xxu_priv),

	.power_ctrl = rtl2832u_power_ctrl,
	.i2c_algo = &rtl28xxu_i2c_algo,
	.read_config = rtl2832u_read_config,
	.frontend_attach = rtl2832u_frontend_attach,
	.tuner_attach = rtl2832u_tuner_attach,
	.init = rtl28xxu_init,
	.exit = rtl28xxu_exit,
	.get_rc_config = rtl2832u_get_rc_config,

	.num_adapters = 1,
	.adapter = {
		{
			.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
		},
	},
};

static const struct usb_device_id rtl28xxu_id_table[] = {
	/* RTL2831U devices: */
	{ DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
		&rtl2831u_props, "Realtek RTL2831U reference design", NULL) },
	{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
		&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
	{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
		&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },

	/* RTL2832U devices: */
	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832,
		&rtl2832u_props, "Realtek RTL2832U reference design", NULL) },
	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838,
		&rtl2832u_props, "Realtek RTL2832U reference design", NULL) },
	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
		&rtl2832u_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) },
	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
		&rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
		&rtl2832u_props, "TerraTec NOXON DAB Stick", NULL) },
	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV2,
		&rtl2832u_props, "TerraTec NOXON DAB Stick (rev 2)", NULL) },
	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV3,
		&rtl2832u_props, "TerraTec NOXON DAB Stick (rev 3)", NULL) },
	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0,
		&rtl2832u_props, "Trekstor DVB-T Stick Terres 2.0", NULL) },
	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101,
		&rtl2832u_props, "Dexatek DK DVB-T Dongle", NULL) },
	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680,
		&rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) },
	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_MINID,
		&rtl2832u_props, "Leadtek Winfast DTV Dongle Mini D", NULL) },
	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3,
		&rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) },
	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102,
		&rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) },
	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7,
		&rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) },
	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd3a8,
		&rtl2832u_props, "ASUS My Cinema-U3100Mini Plus V2", NULL) },
	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd393,
		&rtl2832u_props, "GIGABYTE U7300", NULL) },
	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1104,
		&rtl2832u_props, "MSI DIGIVOX Micro HD", NULL) },
	{ DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620,
		&rtl2832u_props, "Compro VideoMate U620F", NULL) },
	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
		&rtl2832u_props, "MaxMedia HU394-T", NULL) },
	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
		&rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) },
	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,
		&rtl2832u_props, "Crypto ReDi PC 50 A", NULL) },
	{ DVB_USB_DEVICE(USB_VID_KYE, 0x707f,
		&rtl2832u_props, "Genius TVGo DVB-T03", NULL) },

	/* RTL2832P devices: */
	{ DVB_USB_DEVICE(USB_VID_HANFTEK, 0x0131,
		&rtl2832u_props, "Astrometa DVB-T2", NULL) },
	{ }
};
MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);

static struct usb_driver rtl28xxu_usb_driver = {
	.name = KBUILD_MODNAME,
	.id_table = rtl28xxu_id_table,
	.probe = dvb_usbv2_probe,
	.disconnect = dvb_usbv2_disconnect,
	.suspend = dvb_usbv2_suspend,
	.resume = dvb_usbv2_resume,
	.reset_resume = dvb_usbv2_reset_resume,
	.no_dynamic_id = 1,
	.soft_unbind = 1,
};

module_usb_driver(rtl28xxu_usb_driver);

MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_AUTHOR("Thomas Mair <thomas.mair86@googlemail.com>");
MODULE_LICENSE("GPL");