/* * tps80031.c -- TI TPS80031/TPS80032 mfd core driver. * * MFD core driver for TI TPS80031/TPS80032 Fully Integrated * Power Management with Power Path and Battery Charger * * Copyright (c) 2012, NVIDIA Corporation. * * Author: Laxman Dewangan * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2. * * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, * whether express or implied; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307, USA */ #include #include #include #include #include #include #include #include #include #include static struct resource tps80031_rtc_resources[] = { { .start = TPS80031_INT_RTC_ALARM, .end = TPS80031_INT_RTC_ALARM, .flags = IORESOURCE_IRQ, }, }; /* TPS80031 sub mfd devices */ static const struct mfd_cell tps80031_cell[] = { { .name = "tps80031-pmic", }, { .name = "tps80031-clock", }, { .name = "tps80031-rtc", .num_resources = ARRAY_SIZE(tps80031_rtc_resources), .resources = tps80031_rtc_resources, }, { .name = "tps80031-gpadc", }, { .name = "tps80031-fuel-gauge", }, { .name = "tps80031-charger", }, }; static int tps80031_slave_address[TPS80031_NUM_SLAVES] = { TPS80031_I2C_ID0_ADDR, TPS80031_I2C_ID1_ADDR, TPS80031_I2C_ID2_ADDR, TPS80031_I2C_ID3_ADDR, }; struct tps80031_pupd_data { u8 reg; u8 pullup_bit; u8 pulldown_bit; }; #define TPS80031_IRQ(_reg, _mask) \ { \ .reg_offset = (TPS80031_INT_MSK_LINE_##_reg) - \ TPS80031_INT_MSK_LINE_A, \ .mask = BIT(_mask), \ } static const struct regmap_irq tps80031_main_irqs[] = { [TPS80031_INT_PWRON] = TPS80031_IRQ(A, 0), [TPS80031_INT_RPWRON] = TPS80031_IRQ(A, 1), [TPS80031_INT_SYS_VLOW] = TPS80031_IRQ(A, 2), [TPS80031_INT_RTC_ALARM] = TPS80031_IRQ(A, 3), [TPS80031_INT_RTC_PERIOD] = TPS80031_IRQ(A, 4), [TPS80031_INT_HOT_DIE] = TPS80031_IRQ(A, 5), [TPS80031_INT_VXX_SHORT] = TPS80031_IRQ(A, 6), [TPS80031_INT_SPDURATION] = TPS80031_IRQ(A, 7), [TPS80031_INT_WATCHDOG] = TPS80031_IRQ(B, 0), [TPS80031_INT_BAT] = TPS80031_IRQ(B, 1), [TPS80031_INT_SIM] = TPS80031_IRQ(B, 2), [TPS80031_INT_MMC] = TPS80031_IRQ(B, 3), [TPS80031_INT_RES] = TPS80031_IRQ(B, 4), [TPS80031_INT_GPADC_RT] = TPS80031_IRQ(B, 5), [TPS80031_INT_GPADC_SW2_EOC] = TPS80031_IRQ(B, 6), [TPS80031_INT_CC_AUTOCAL] = TPS80031_IRQ(B, 7), [TPS80031_INT_ID_WKUP] = TPS80031_IRQ(C, 0), [TPS80031_INT_VBUSS_WKUP] = TPS80031_IRQ(C, 1), [TPS80031_INT_ID] = TPS80031_IRQ(C, 2), [TPS80031_INT_VBUS] = TPS80031_IRQ(C, 3), [TPS80031_INT_CHRG_CTRL] = TPS80031_IRQ(C, 4), [TPS80031_INT_EXT_CHRG] = TPS80031_IRQ(C, 5), [TPS80031_INT_INT_CHRG] = TPS80031_IRQ(C, 6), [TPS80031_INT_RES2] = TPS80031_IRQ(C, 7), }; static struct regmap_irq_chip tps80031_irq_chip = { .name = "tps80031", .irqs = tps80031_main_irqs, .num_irqs = ARRAY_SIZE(tps80031_main_irqs), .num_regs = 3, .status_base = TPS80031_INT_STS_A, .mask_base = TPS80031_INT_MSK_LINE_A, }; #define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit) \ { \ .reg = TPS80031_CFG_INPUT_PUPD##_reg, \ .pulldown_bit = _pulldown_bit, \ .pullup_bit = _pullup_bit, \ } static const struct tps80031_pupd_data tps80031_pupds[] = { [TPS80031_PREQ1] = PUPD_DATA(1, BIT(0), BIT(1)), [TPS80031_PREQ2A] = PUPD_DATA(1, BIT(2), BIT(3)), [TPS80031_PREQ2B] = PUPD_DATA(1, BIT(4), BIT(5)), [TPS80031_PREQ2C] = PUPD_DATA(1, BIT(6), BIT(7)), [TPS80031_PREQ3] = PUPD_DATA(2, BIT(0), BIT(1)), [TPS80031_NRES_WARM] = PUPD_DATA(2, 0, BIT(2)), [TPS80031_PWM_FORCE] = PUPD_DATA(2, BIT(5), 0), [TPS80031_CHRG_EXT_CHRG_STATZ] = PUPD_DATA(2, 0, BIT(6)), [TPS80031_SIM] = PUPD_DATA(3, BIT(0), BIT(1)), [TPS80031_MMC] = PUPD_DATA(3, BIT(2), BIT(3)), [TPS80031_GPADC_START] = PUPD_DATA(3, BIT(4), 0), [TPS80031_DVSI2C_SCL] = PUPD_DATA(4, 0, BIT(0)), [TPS80031_DVSI2C_SDA] = PUPD_DATA(4, 0, BIT(1)), [TPS80031_CTLI2C_SCL] = PUPD_DATA(4, 0, BIT(2)), [TPS80031_CTLI2C_SDA] = PUPD_DATA(4, 0, BIT(3)), }; static struct tps80031 *tps80031_power_off_dev; int tps80031_ext_power_req_config(struct device *dev, unsigned long ext_ctrl_flag, int preq_bit, int state_reg_add, int trans_reg_add) { u8 res_ass_reg = 0; int preq_mask_bit = 0; int ret; if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ)) return 0; if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) { res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3); preq_mask_bit = 5; } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) { res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3); preq_mask_bit = 6; } else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) { res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3); preq_mask_bit = 7; } /* Configure REQ_ASS registers */ ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg, BIT(preq_bit & 0x7)); if (ret < 0) { dev_err(dev, "reg 0x%02x setbit failed, err = %d\n", res_ass_reg, ret); return ret; } /* Unmask the PREQ */ ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1, TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit)); if (ret < 0) { dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n", TPS80031_PHOENIX_MSK_TRANSITION, ret); return ret; } /* Switch regulator control to resource now */ if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 | TPS80031_PWR_REQ_INPUT_PREQ3)) { ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add, 0x0, TPS80031_STATE_MASK); if (ret < 0) dev_err(dev, "reg 0x%02x update failed, err = %d\n", state_reg_add, ret); } else { ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add, TPS80031_TRANS_SLEEP_OFF, TPS80031_TRANS_SLEEP_MASK); if (ret < 0) dev_err(dev, "reg 0x%02x update failed, err = %d\n", trans_reg_add, ret); } return ret; } EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config); static void tps80031_power_off(void) { dev_info(tps80031_power_off_dev->dev, "switching off PMU\n"); tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1, TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF); } static void tps80031_pupd_init(struct tps80031 *tps80031, struct tps80031_platform_data *pdata) { struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data; int data_size = pdata->pupd_init_data_size; int i; for (i = 0; i < data_size; ++i) { struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i]; const struct tps80031_pupd_data *pupd = &tps80031_pupds[pupd_init->input_pin]; u8 update_value = 0; u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit; if (pupd_init->setting == TPS80031_PUPD_PULLDOWN) update_value = pupd->pulldown_bit; else if (pupd_init->setting == TPS80031_PUPD_PULLUP) update_value = pupd->pullup_bit; tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg, update_value, update_mask); } } static int tps80031_init_ext_control(struct tps80031 *tps80031, struct tps80031_platform_data *pdata) { struct device *dev = tps80031->dev; int ret; int i; /* Clear all external control for this rail */ for (i = 0; i < 9; ++i) { ret = tps80031_write(dev, TPS80031_SLAVE_ID1, TPS80031_PREQ1_RES_ASS_A + i, 0); if (ret < 0) { dev_err(dev, "reg 0x%02x write failed, err = %d\n", TPS80031_PREQ1_RES_ASS_A + i, ret); return ret; } } /* Mask the PREQ */ ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5); if (ret < 0) { dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n", TPS80031_PHOENIX_MSK_TRANSITION, ret); return ret; } return ret; } static int tps80031_irq_init(struct tps80031 *tps80031, int irq, int irq_base) { struct device *dev = tps80031->dev; int i, ret; /* * The MASK register used for updating status register when * interrupt occurs and LINE register used to pass the status * to actual interrupt line. As per datasheet: * When INT_MSK_LINE [i] is set to 1, the associated interrupt * number i is INT line masked, which means that no interrupt is * generated on the INT line. * When INT_MSK_LINE [i] is set to 0, the associated interrupt * number i is line enabled: An interrupt is generated on the * INT line. * In any case, the INT_STS [i] status bit may or may not be updated, * only linked to the INT_MSK_STS [i] configuration register bit. * * When INT_MSK_STS [i] is set to 1, the associated interrupt number * i is status masked, which means that no interrupt is stored in * the INT_STS[i] status bit. Note that no interrupt number i is * generated on the INT line, even if the INT_MSK_LINE [i] register * bit is set to 0. * When INT_MSK_STS [i] is set to 0, the associated interrupt number i * is status enabled: An interrupt status is updated in the INT_STS [i] * register. The interrupt may or may not be generated on the INT line, * depending on the INT_MSK_LINE [i] configuration register bit. */ for (i = 0; i < 3; i++) tps80031_write(dev, TPS80031_SLAVE_ID2, TPS80031_INT_MSK_STS_A + i, 0x00); ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq, IRQF_ONESHOT, irq_base, &tps80031_irq_chip, &tps80031->irq_data); if (ret < 0) { dev_err(dev, "add irq failed, err = %d\n", ret); return ret; } return ret; } static bool rd_wr_reg_id0(struct device *dev, unsigned int reg) { switch (reg) { case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE: return true; default: return false; } } static bool rd_wr_reg_id1(struct device *dev, unsigned int reg) { switch (reg) { case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG: case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7: case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG: case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE: case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST: case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE: case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE: case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C: case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING: case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD: case TPS80031_BACKUP_REG: return true; default: return false; } } static bool is_volatile_reg_id1(struct device *dev, unsigned int reg) { switch (reg) { case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE: case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE: case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE: case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C: case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING: case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD: return true; default: return false; } } static bool rd_wr_reg_id2(struct device *dev, unsigned int reg) { switch (reg) { case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION: case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1: case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB: case TPS80031_TOGGLE1 ... TPS80031_VIBMODE: case TPS80031_PWM1ON ... TPS80031_PWM2OFF: case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11: case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C: case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2: return true; default: return false; } } static bool rd_wr_reg_id3(struct device *dev, unsigned int reg) { switch (reg) { case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18: return true; default: return false; } } static const struct regmap_config tps80031_regmap_configs[] = { { .reg_bits = 8, .val_bits = 8, .writeable_reg = rd_wr_reg_id0, .readable_reg = rd_wr_reg_id0, .max_register = TPS80031_MAX_REGISTER, }, { .reg_bits = 8, .val_bits = 8, .writeable_reg = rd_wr_reg_id1, .readable_reg = rd_wr_reg_id1, .volatile_reg = is_volatile_reg_id1, .max_register = TPS80031_MAX_REGISTER, }, { .reg_bits = 8, .val_bits = 8, .writeable_reg = rd_wr_reg_id2, .readable_reg = rd_wr_reg_id2, .max_register = TPS80031_MAX_REGISTER, }, { .reg_bits = 8, .val_bits = 8, .writeable_reg = rd_wr_reg_id3, .readable_reg = rd_wr_reg_id3, .max_register = TPS80031_MAX_REGISTER, }, }; static int tps80031_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct tps80031_platform_data *pdata = dev_get_platdata(&client->dev); struct tps80031 *tps80031; int ret; uint8_t es_version; uint8_t ep_ver; int i; if (!pdata) { dev_err(&client->dev, "tps80031 requires platform data\n"); return -EINVAL; } tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL); if (!tps80031) return -ENOMEM; for (i = 0; i < TPS80031_NUM_SLAVES; i++) { if (tps80031_slave_address[i] == client->addr) tps80031->clients[i] = client; else tps80031->clients[i] = i2c_new_dummy(client->adapter, tps80031_slave_address[i]); if (!tps80031->clients[i]) { dev_err(&client->dev, "can't attach client %d\n", i); ret = -ENOMEM; goto fail_client_reg; } i2c_set_clientdata(tps80031->clients[i], tps80031); tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i], &tps80031_regmap_configs[i]); if (IS_ERR(tps80031->regmap[i])) { ret = PTR_ERR(tps80031->regmap[i]); dev_err(&client->dev, "regmap %d init failed, err %d\n", i, ret); goto fail_client_reg; } } ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3, TPS80031_JTAGVERNUM, &es_version); if (ret < 0) { dev_err(&client->dev, "Silicon version number read failed: %d\n", ret); goto fail_client_reg; } ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3, TPS80031_EPROM_REV, &ep_ver); if (ret < 0) { dev_err(&client->dev, "Silicon eeprom version read failed: %d\n", ret); goto fail_client_reg; } dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n", es_version, ep_ver); tps80031->es_version = es_version; tps80031->dev = &client->dev; i2c_set_clientdata(client, tps80031); tps80031->chip_info = id->driver_data; ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base); if (ret) { dev_err(&client->dev, "IRQ init failed: %d\n", ret); goto fail_client_reg; } tps80031_pupd_init(tps80031, pdata); tps80031_init_ext_control(tps80031, pdata); ret = mfd_add_devices(tps80031->dev, -1, tps80031_cell, ARRAY_SIZE(tps80031_cell), NULL, 0, regmap_irq_get_domain(tps80031->irq_data)); if (ret < 0) { dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret); goto fail_mfd_add; } if (pdata->use_power_off && !pm_power_off) { tps80031_power_off_dev = tps80031; pm_power_off = tps80031_power_off; } return 0; fail_mfd_add: regmap_del_irq_chip(client->irq, tps80031->irq_data); fail_client_reg: for (i = 0; i < TPS80031_NUM_SLAVES; i++) { if (tps80031->clients[i] && (tps80031->clients[i] != client)) i2c_unregister_device(tps80031->clients[i]); } return ret; } static const struct i2c_device_id tps80031_id_table[] = { { "tps80031", TPS80031 }, { "tps80032", TPS80032 }, { } }; static struct i2c_driver tps80031_driver = { .driver = { .name = "tps80031", .suppress_bind_attrs = true, }, .probe = tps80031_probe, .id_table = tps80031_id_table, }; static int __init tps80031_init(void) { return i2c_add_driver(&tps80031_driver); } subsys_initcall(tps80031_init);