// SPDX-License-Identifier: GPL-2.0-or-later /* * exynos_adc.c - Support for ADC in EXYNOS SoCs * * 8 ~ 10 channel, 10/12-bit ADC * * Copyright (C) 2013 Naveen Krishna Chatradhi */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */ #define ADC_V1_CON(x) ((x) + 0x00) #define ADC_V1_TSC(x) ((x) + 0x04) #define ADC_V1_DLY(x) ((x) + 0x08) #define ADC_V1_DATX(x) ((x) + 0x0C) #define ADC_V1_DATY(x) ((x) + 0x10) #define ADC_V1_UPDN(x) ((x) + 0x14) #define ADC_V1_INTCLR(x) ((x) + 0x18) #define ADC_V1_MUX(x) ((x) + 0x1c) #define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20) /* S3C2410 ADC registers definitions */ #define ADC_S3C2410_MUX(x) ((x) + 0x18) /* Future ADC_V2 registers definitions */ #define ADC_V2_CON1(x) ((x) + 0x00) #define ADC_V2_CON2(x) ((x) + 0x04) #define ADC_V2_STAT(x) ((x) + 0x08) #define ADC_V2_INT_EN(x) ((x) + 0x10) #define ADC_V2_INT_ST(x) ((x) + 0x14) #define ADC_V2_VER(x) ((x) + 0x20) /* Bit definitions for ADC_V1 */ #define ADC_V1_CON_RES (1u << 16) #define ADC_V1_CON_PRSCEN (1u << 14) #define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) #define ADC_V1_CON_STANDBY (1u << 2) /* Bit definitions for S3C2410 ADC */ #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3) #define ADC_S3C2410_DATX_MASK 0x3FF #define ADC_S3C2416_CON_RES_SEL (1u << 3) /* touch screen always uses channel 0 */ #define ADC_S3C2410_MUX_TS 0 /* ADCTSC Register Bits */ #define ADC_S3C2443_TSC_UD_SEN (1u << 8) #define ADC_S3C2410_TSC_YM_SEN (1u << 7) #define ADC_S3C2410_TSC_YP_SEN (1u << 6) #define ADC_S3C2410_TSC_XM_SEN (1u << 5) #define ADC_S3C2410_TSC_XP_SEN (1u << 4) #define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3) #define ADC_S3C2410_TSC_AUTO_PST (1u << 2) #define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0) #define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \ ADC_S3C2410_TSC_YP_SEN | \ ADC_S3C2410_TSC_XP_SEN | \ ADC_S3C2410_TSC_XY_PST(3)) #define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \ ADC_S3C2410_TSC_YP_SEN | \ ADC_S3C2410_TSC_XP_SEN | \ ADC_S3C2410_TSC_AUTO_PST | \ ADC_S3C2410_TSC_XY_PST(0)) /* Bit definitions for ADC_V2 */ #define ADC_V2_CON1_SOFT_RESET (1u << 2) #define ADC_V2_CON2_OSEL (1u << 10) #define ADC_V2_CON2_ESEL (1u << 9) #define ADC_V2_CON2_HIGHF (1u << 8) #define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) #define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) #define ADC_V2_CON2_ACH_MASK 0xF #define MAX_ADC_V2_CHANNELS 10 #define MAX_ADC_V1_CHANNELS 8 #define MAX_EXYNOS3250_ADC_CHANNELS 2 #define MAX_EXYNOS4212_ADC_CHANNELS 4 #define MAX_S5PV210_ADC_CHANNELS 10 /* Bit definitions common for ADC_V1 and ADC_V2 */ #define ADC_CON_EN_START (1u << 0) #define ADC_CON_EN_START_MASK (0x3 << 0) #define ADC_DATX_PRESSED (1u << 15) #define ADC_DATX_MASK 0xFFF #define ADC_DATY_MASK 0xFFF #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) #define EXYNOS_ADCV1_PHY_OFFSET 0x0718 #define EXYNOS_ADCV2_PHY_OFFSET 0x0720 struct exynos_adc { struct exynos_adc_data *data; struct device *dev; struct input_dev *input; void __iomem *regs; struct regmap *pmu_map; struct clk *clk; struct clk *sclk; unsigned int irq; unsigned int tsirq; unsigned int delay; struct regulator *vdd; struct completion completion; u32 value; unsigned int version; bool read_ts; u32 ts_x; u32 ts_y; }; struct exynos_adc_data { int num_channels; bool needs_sclk; bool needs_adc_phy; int phy_offset; u32 mask; void (*init_hw)(struct exynos_adc *info); void (*exit_hw)(struct exynos_adc *info); void (*clear_irq)(struct exynos_adc *info); void (*start_conv)(struct exynos_adc *info, unsigned long addr); }; static void exynos_adc_unprepare_clk(struct exynos_adc *info) { if (info->data->needs_sclk) clk_unprepare(info->sclk); clk_unprepare(info->clk); } static int exynos_adc_prepare_clk(struct exynos_adc *info) { int ret; ret = clk_prepare(info->clk); if (ret) { dev_err(info->dev, "failed preparing adc clock: %d\n", ret); return ret; } if (info->data->needs_sclk) { ret = clk_prepare(info->sclk); if (ret) { clk_unprepare(info->clk); dev_err(info->dev, "failed preparing sclk_adc clock: %d\n", ret); return ret; } } return 0; } static void exynos_adc_disable_clk(struct exynos_adc *info) { if (info->data->needs_sclk) clk_disable(info->sclk); clk_disable(info->clk); } static int exynos_adc_enable_clk(struct exynos_adc *info) { int ret; ret = clk_enable(info->clk); if (ret) { dev_err(info->dev, "failed enabling adc clock: %d\n", ret); return ret; } if (info->data->needs_sclk) { ret = clk_enable(info->sclk); if (ret) { clk_disable(info->clk); dev_err(info->dev, "failed enabling sclk_adc clock: %d\n", ret); return ret; } } return 0; } static void exynos_adc_v1_init_hw(struct exynos_adc *info) { u32 con1; if (info->data->needs_adc_phy) regmap_write(info->pmu_map, info->data->phy_offset, 1); /* set default prescaler values and Enable prescaler */ con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; /* Enable 12-bit ADC resolution */ con1 |= ADC_V1_CON_RES; writel(con1, ADC_V1_CON(info->regs)); /* set touchscreen delay */ writel(info->delay, ADC_V1_DLY(info->regs)); } static void exynos_adc_v1_exit_hw(struct exynos_adc *info) { u32 con; if (info->data->needs_adc_phy) regmap_write(info->pmu_map, info->data->phy_offset, 0); con = readl(ADC_V1_CON(info->regs)); con |= ADC_V1_CON_STANDBY; writel(con, ADC_V1_CON(info->regs)); } static void exynos_adc_v1_clear_irq(struct exynos_adc *info) { writel(1, ADC_V1_INTCLR(info->regs)); } static void exynos_adc_v1_start_conv(struct exynos_adc *info, unsigned long addr) { u32 con1; writel(addr, ADC_V1_MUX(info->regs)); con1 = readl(ADC_V1_CON(info->regs)); writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } /* Exynos4212 and 4412 is like ADCv1 but with four channels only */ static const struct exynos_adc_data exynos4212_adc_data = { .num_channels = MAX_EXYNOS4212_ADC_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .needs_adc_phy = true, .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .clear_irq = exynos_adc_v1_clear_irq, .start_conv = exynos_adc_v1_start_conv, }; static const struct exynos_adc_data exynos_adc_v1_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .needs_adc_phy = true, .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .clear_irq = exynos_adc_v1_clear_irq, .start_conv = exynos_adc_v1_start_conv, }; static const struct exynos_adc_data exynos_adc_s5pv210_data = { .num_channels = MAX_S5PV210_ADC_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .clear_irq = exynos_adc_v1_clear_irq, .start_conv = exynos_adc_v1_start_conv, }; static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info, unsigned long addr) { u32 con1; /* Enable 12 bit ADC resolution */ con1 = readl(ADC_V1_CON(info->regs)); con1 |= ADC_S3C2416_CON_RES_SEL; writel(con1, ADC_V1_CON(info->regs)); /* Select channel for S3C2416 */ writel(addr, ADC_S3C2410_MUX(info->regs)); con1 = readl(ADC_V1_CON(info->regs)); writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } static struct exynos_adc_data const exynos_adc_s3c2416_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .start_conv = exynos_adc_s3c2416_start_conv, }; static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info, unsigned long addr) { u32 con1; /* Select channel for S3C2433 */ writel(addr, ADC_S3C2410_MUX(info->regs)); con1 = readl(ADC_V1_CON(info->regs)); writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } static struct exynos_adc_data const exynos_adc_s3c2443_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .start_conv = exynos_adc_s3c2443_start_conv, }; static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info, unsigned long addr) { u32 con1; con1 = readl(ADC_V1_CON(info->regs)); con1 &= ~ADC_S3C2410_CON_SELMUX(0x7); con1 |= ADC_S3C2410_CON_SELMUX(addr); writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } static struct exynos_adc_data const exynos_adc_s3c24xx_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .start_conv = exynos_adc_s3c64xx_start_conv, }; static struct exynos_adc_data const exynos_adc_s3c64xx_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, .clear_irq = exynos_adc_v1_clear_irq, .start_conv = exynos_adc_s3c64xx_start_conv, }; static void exynos_adc_v2_init_hw(struct exynos_adc *info) { u32 con1, con2; if (info->data->needs_adc_phy) regmap_write(info->pmu_map, info->data->phy_offset, 1); con1 = ADC_V2_CON1_SOFT_RESET; writel(con1, ADC_V2_CON1(info->regs)); con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); writel(con2, ADC_V2_CON2(info->regs)); /* Enable interrupts */ writel(1, ADC_V2_INT_EN(info->regs)); } static void exynos_adc_v2_exit_hw(struct exynos_adc *info) { u32 con; if (info->data->needs_adc_phy) regmap_write(info->pmu_map, info->data->phy_offset, 0); con = readl(ADC_V2_CON1(info->regs)); con &= ~ADC_CON_EN_START; writel(con, ADC_V2_CON1(info->regs)); } static void exynos_adc_v2_clear_irq(struct exynos_adc *info) { writel(1, ADC_V2_INT_ST(info->regs)); } static void exynos_adc_v2_start_conv(struct exynos_adc *info, unsigned long addr) { u32 con1, con2; con2 = readl(ADC_V2_CON2(info->regs)); con2 &= ~ADC_V2_CON2_ACH_MASK; con2 |= ADC_V2_CON2_ACH_SEL(addr); writel(con2, ADC_V2_CON2(info->regs)); con1 = readl(ADC_V2_CON1(info->regs)); writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs)); } static const struct exynos_adc_data exynos_adc_v2_data = { .num_channels = MAX_ADC_V2_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .needs_adc_phy = true, .phy_offset = EXYNOS_ADCV2_PHY_OFFSET, .init_hw = exynos_adc_v2_init_hw, .exit_hw = exynos_adc_v2_exit_hw, .clear_irq = exynos_adc_v2_clear_irq, .start_conv = exynos_adc_v2_start_conv, }; static const struct exynos_adc_data exynos3250_adc_data = { .num_channels = MAX_EXYNOS3250_ADC_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .needs_sclk = true, .needs_adc_phy = true, .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, .init_hw = exynos_adc_v2_init_hw, .exit_hw = exynos_adc_v2_exit_hw, .clear_irq = exynos_adc_v2_clear_irq, .start_conv = exynos_adc_v2_start_conv, }; static void exynos_adc_exynos7_init_hw(struct exynos_adc *info) { u32 con1, con2; if (info->data->needs_adc_phy) regmap_write(info->pmu_map, info->data->phy_offset, 1); con1 = ADC_V2_CON1_SOFT_RESET; writel(con1, ADC_V2_CON1(info->regs)); con2 = readl(ADC_V2_CON2(info->regs)); con2 &= ~ADC_V2_CON2_C_TIME(7); con2 |= ADC_V2_CON2_C_TIME(0); writel(con2, ADC_V2_CON2(info->regs)); /* Enable interrupts */ writel(1, ADC_V2_INT_EN(info->regs)); } static const struct exynos_adc_data exynos7_adc_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .init_hw = exynos_adc_exynos7_init_hw, .exit_hw = exynos_adc_v2_exit_hw, .clear_irq = exynos_adc_v2_clear_irq, .start_conv = exynos_adc_v2_start_conv, }; static const struct of_device_id exynos_adc_match[] = { { .compatible = "samsung,s3c2410-adc", .data = &exynos_adc_s3c24xx_data, }, { .compatible = "samsung,s3c2416-adc", .data = &exynos_adc_s3c2416_data, }, { .compatible = "samsung,s3c2440-adc", .data = &exynos_adc_s3c24xx_data, }, { .compatible = "samsung,s3c2443-adc", .data = &exynos_adc_s3c2443_data, }, { .compatible = "samsung,s3c6410-adc", .data = &exynos_adc_s3c64xx_data, }, { .compatible = "samsung,s5pv210-adc", .data = &exynos_adc_s5pv210_data, }, { .compatible = "samsung,exynos4212-adc", .data = &exynos4212_adc_data, }, { .compatible = "samsung,exynos-adc-v1", .data = &exynos_adc_v1_data, }, { .compatible = "samsung,exynos-adc-v2", .data = &exynos_adc_v2_data, }, { .compatible = "samsung,exynos3250-adc", .data = &exynos3250_adc_data, }, { .compatible = "samsung,exynos7-adc", .data = &exynos7_adc_data, }, {}, }; MODULE_DEVICE_TABLE(of, exynos_adc_match); static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev) { const struct of_device_id *match; match = of_match_node(exynos_adc_match, pdev->dev.of_node); return (struct exynos_adc_data *)match->data; } static int exynos_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct exynos_adc *info = iio_priv(indio_dev); unsigned long timeout; int ret; if (mask != IIO_CHAN_INFO_RAW) return -EINVAL; mutex_lock(&indio_dev->mlock); reinit_completion(&info->completion); /* Select the channel to be used and Trigger conversion */ if (info->data->start_conv) info->data->start_conv(info, chan->address); timeout = wait_for_completion_timeout(&info->completion, EXYNOS_ADC_TIMEOUT); if (timeout == 0) { dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); if (info->data->init_hw) info->data->init_hw(info); ret = -ETIMEDOUT; } else { *val = info->value; *val2 = 0; ret = IIO_VAL_INT; } mutex_unlock(&indio_dev->mlock); return ret; } static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y) { struct exynos_adc *info = iio_priv(indio_dev); unsigned long timeout; int ret; mutex_lock(&indio_dev->mlock); info->read_ts = true; reinit_completion(&info->completion); writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST, ADC_V1_TSC(info->regs)); /* Select the ts channel to be used and Trigger conversion */ info->data->start_conv(info, ADC_S3C2410_MUX_TS); timeout = wait_for_completion_timeout(&info->completion, EXYNOS_ADC_TIMEOUT); if (timeout == 0) { dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); if (info->data->init_hw) info->data->init_hw(info); ret = -ETIMEDOUT; } else { *x = info->ts_x; *y = info->ts_y; ret = 0; } info->read_ts = false; mutex_unlock(&indio_dev->mlock); return ret; } static irqreturn_t exynos_adc_isr(int irq, void *dev_id) { struct exynos_adc *info = dev_id; u32 mask = info->data->mask; /* Read value */ if (info->read_ts) { info->ts_x = readl(ADC_V1_DATX(info->regs)); info->ts_y = readl(ADC_V1_DATY(info->regs)); writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs)); } else { info->value = readl(ADC_V1_DATX(info->regs)) & mask; } /* clear irq */ if (info->data->clear_irq) info->data->clear_irq(info); complete(&info->completion); return IRQ_HANDLED; } /* * Here we (ab)use a threaded interrupt handler to stay running * for as long as the touchscreen remains pressed, we report * a new event with the latest data and then sleep until the * next timer tick. This mirrors the behavior of the old * driver, with much less code. */ static irqreturn_t exynos_ts_isr(int irq, void *dev_id) { struct exynos_adc *info = dev_id; struct iio_dev *dev = dev_get_drvdata(info->dev); u32 x, y; bool pressed; int ret; while (info->input->users) { ret = exynos_read_s3c64xx_ts(dev, &x, &y); if (ret == -ETIMEDOUT) break; pressed = x & y & ADC_DATX_PRESSED; if (!pressed) { input_report_key(info->input, BTN_TOUCH, 0); input_sync(info->input); break; } input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK); input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK); input_report_key(info->input, BTN_TOUCH, 1); input_sync(info->input); usleep_range(1000, 1100); } writel(0, ADC_V1_CLRINTPNDNUP(info->regs)); return IRQ_HANDLED; } static int exynos_adc_reg_access(struct iio_dev *indio_dev, unsigned reg, unsigned writeval, unsigned *readval) { struct exynos_adc *info = iio_priv(indio_dev); if (readval == NULL) return -EINVAL; *readval = readl(info->regs + reg); return 0; } static const struct iio_info exynos_adc_iio_info = { .read_raw = &exynos_read_raw, .debugfs_reg_access = &exynos_adc_reg_access, }; #define ADC_CHANNEL(_index, _id) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = _index, \ .address = _index, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .datasheet_name = _id, \ } static const struct iio_chan_spec exynos_adc_iio_channels[] = { ADC_CHANNEL(0, "adc0"), ADC_CHANNEL(1, "adc1"), ADC_CHANNEL(2, "adc2"), ADC_CHANNEL(3, "adc3"), ADC_CHANNEL(4, "adc4"), ADC_CHANNEL(5, "adc5"), ADC_CHANNEL(6, "adc6"), ADC_CHANNEL(7, "adc7"), ADC_CHANNEL(8, "adc8"), ADC_CHANNEL(9, "adc9"), }; static int exynos_adc_remove_devices(struct device *dev, void *c) { struct platform_device *pdev = to_platform_device(dev); platform_device_unregister(pdev); return 0; } static int exynos_adc_ts_open(struct input_dev *dev) { struct exynos_adc *info = input_get_drvdata(dev); enable_irq(info->tsirq); return 0; } static void exynos_adc_ts_close(struct input_dev *dev) { struct exynos_adc *info = input_get_drvdata(dev); disable_irq(info->tsirq); } static int exynos_adc_ts_init(struct exynos_adc *info) { int ret; if (info->tsirq <= 0) return -ENODEV; info->input = input_allocate_device(); if (!info->input) return -ENOMEM; info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0); input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0); info->input->name = "S3C24xx TouchScreen"; info->input->id.bustype = BUS_HOST; info->input->open = exynos_adc_ts_open; info->input->close = exynos_adc_ts_close; input_set_drvdata(info->input, info); ret = input_register_device(info->input); if (ret) { input_free_device(info->input); return ret; } disable_irq(info->tsirq); ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr, IRQF_ONESHOT, "touchscreen", info); if (ret) input_unregister_device(info->input); return ret; } static int exynos_adc_probe(struct platform_device *pdev) { struct exynos_adc *info = NULL; struct device_node *np = pdev->dev.of_node; struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev); struct iio_dev *indio_dev = NULL; bool has_ts = false; int ret = -ENODEV; int irq; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc)); if (!indio_dev) { dev_err(&pdev->dev, "failed allocating iio device\n"); return -ENOMEM; } info = iio_priv(indio_dev); info->data = exynos_adc_get_data(pdev); if (!info->data) { dev_err(&pdev->dev, "failed getting exynos_adc_data\n"); return -EINVAL; } info->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(info->regs)) return PTR_ERR(info->regs); if (info->data->needs_adc_phy) { info->pmu_map = syscon_regmap_lookup_by_phandle( pdev->dev.of_node, "samsung,syscon-phandle"); if (IS_ERR(info->pmu_map)) { dev_err(&pdev->dev, "syscon regmap lookup failed.\n"); return PTR_ERR(info->pmu_map); } } irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; info->irq = irq; irq = platform_get_irq(pdev, 1); if (irq == -EPROBE_DEFER) return irq; info->tsirq = irq; info->dev = &pdev->dev; init_completion(&info->completion); info->clk = devm_clk_get(&pdev->dev, "adc"); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed getting clock, err = %ld\n", PTR_ERR(info->clk)); return PTR_ERR(info->clk); } if (info->data->needs_sclk) { info->sclk = devm_clk_get(&pdev->dev, "sclk"); if (IS_ERR(info->sclk)) { dev_err(&pdev->dev, "failed getting sclk clock, err = %ld\n", PTR_ERR(info->sclk)); return PTR_ERR(info->sclk); } } info->vdd = devm_regulator_get(&pdev->dev, "vdd"); if (IS_ERR(info->vdd)) { dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", PTR_ERR(info->vdd)); return PTR_ERR(info->vdd); } ret = regulator_enable(info->vdd); if (ret) return ret; ret = exynos_adc_prepare_clk(info); if (ret) goto err_disable_reg; ret = exynos_adc_enable_clk(info); if (ret) goto err_unprepare_clk; platform_set_drvdata(pdev, indio_dev); indio_dev->name = dev_name(&pdev->dev); indio_dev->dev.parent = &pdev->dev; indio_dev->dev.of_node = pdev->dev.of_node; indio_dev->info = &exynos_adc_iio_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = exynos_adc_iio_channels; indio_dev->num_channels = info->data->num_channels; ret = request_irq(info->irq, exynos_adc_isr, 0, dev_name(&pdev->dev), info); if (ret < 0) { dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", info->irq); goto err_disable_clk; } ret = iio_device_register(indio_dev); if (ret) goto err_irq; if (info->data->init_hw) info->data->init_hw(info); /* leave out any TS related code if unreachable */ if (IS_REACHABLE(CONFIG_INPUT)) { has_ts = of_property_read_bool(pdev->dev.of_node, "has-touchscreen") || pdata; } if (pdata) info->delay = pdata->delay; else info->delay = 10000; if (has_ts) ret = exynos_adc_ts_init(info); if (ret) goto err_iio; ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); if (ret < 0) { dev_err(&pdev->dev, "failed adding child nodes\n"); goto err_of_populate; } return 0; err_of_populate: device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); if (has_ts) { input_unregister_device(info->input); free_irq(info->tsirq, info); } err_iio: iio_device_unregister(indio_dev); err_irq: free_irq(info->irq, info); err_disable_clk: if (info->data->exit_hw) info->data->exit_hw(info); exynos_adc_disable_clk(info); err_unprepare_clk: exynos_adc_unprepare_clk(info); err_disable_reg: regulator_disable(info->vdd); return ret; } static int exynos_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); if (IS_REACHABLE(CONFIG_INPUT) && info->input) { free_irq(info->tsirq, info); input_unregister_device(info->input); } device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); iio_device_unregister(indio_dev); free_irq(info->irq, info); if (info->data->exit_hw) info->data->exit_hw(info); exynos_adc_disable_clk(info); exynos_adc_unprepare_clk(info); regulator_disable(info->vdd); return 0; } #ifdef CONFIG_PM_SLEEP static int exynos_adc_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct exynos_adc *info = iio_priv(indio_dev); if (info->data->exit_hw) info->data->exit_hw(info); exynos_adc_disable_clk(info); regulator_disable(info->vdd); return 0; } static int exynos_adc_resume(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct exynos_adc *info = iio_priv(indio_dev); int ret; ret = regulator_enable(info->vdd); if (ret) return ret; ret = exynos_adc_enable_clk(info); if (ret) return ret; if (info->data->init_hw) info->data->init_hw(info); return 0; } #endif static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, exynos_adc_suspend, exynos_adc_resume); static struct platform_driver exynos_adc_driver = { .probe = exynos_adc_probe, .remove = exynos_adc_remove, .driver = { .name = "exynos-adc", .of_match_table = exynos_adc_match, .pm = &exynos_adc_pm_ops, }, }; module_platform_driver(exynos_adc_driver); MODULE_AUTHOR("Naveen Krishna Chatradhi "); MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); MODULE_LICENSE("GPL v2");