/* SPDX-License-Identifier: GPL-2.0-only */ /* * {read,write}{b,w,l,q} based on arch/arm64/include/asm/io.h * which was based on arch/arm/include/io.h * * Copyright (C) 1996-2000 Russell King * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2014 Regents of the University of California */ #ifndef _ASM_RISCV_IO_H #define _ASM_RISCV_IO_H #include #include #include /* * MMIO access functions are separated out to break dependency cycles * when using {read,write}* fns in low-level headers */ #include /* * I/O port access constants. */ #ifdef CONFIG_MMU #define IO_SPACE_LIMIT (PCI_IO_SIZE - 1) #define PCI_IOBASE ((void __iomem *)PCI_IO_START) #endif /* CONFIG_MMU */ /* * Emulation routines for the port-mapped IO space used by some PCI drivers. * These are defined as being "fully synchronous", but also "not guaranteed to * be fully ordered with respect to other memory and I/O operations". We're * going to be on the safe side here and just make them: * - Fully ordered WRT each other, by bracketing them with two fences. The * outer set contains both I/O so inX is ordered with outX, while the inner just * needs the type of the access (I for inX and O for outX). * - Ordered in the same manner as readX/writeX WRT memory by subsuming their * fences. * - Ordered WRT timer reads, so udelay and friends don't get elided by the * implementation. * Note that there is no way to actually enforce that outX is a non-posted * operation on RISC-V, but hopefully the timer ordering constraint is * sufficient to ensure this works sanely on controllers that support I/O * writes. */ #define __io_pbr() __asm__ __volatile__ ("fence io,i" : : : "memory"); #define __io_par(v) __asm__ __volatile__ ("fence i,ior" : : : "memory"); #define __io_pbw() __asm__ __volatile__ ("fence iow,o" : : : "memory"); #define __io_paw() __asm__ __volatile__ ("fence o,io" : : : "memory"); #define inb(c) ({ u8 __v; __io_pbr(); __v = readb_cpu((void*)(PCI_IOBASE + (c))); __io_par(__v); __v; }) #define inw(c) ({ u16 __v; __io_pbr(); __v = readw_cpu((void*)(PCI_IOBASE + (c))); __io_par(__v); __v; }) #define inl(c) ({ u32 __v; __io_pbr(); __v = readl_cpu((void*)(PCI_IOBASE + (c))); __io_par(__v); __v; }) #define outb(v,c) ({ __io_pbw(); writeb_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); }) #define outw(v,c) ({ __io_pbw(); writew_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); }) #define outl(v,c) ({ __io_pbw(); writel_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); }) #ifdef CONFIG_64BIT #define inq(c) ({ u64 __v; __io_pbr(); __v = readq_cpu((void*)(c)); __io_par(__v); __v; }) #define outq(v,c) ({ __io_pbw(); writeq_cpu((v),(void*)(c)); __io_paw(); }) #endif /* * Accesses from a single hart to a single I/O address must be ordered. This * allows us to use the raw read macros, but we still need to fence before and * after the block to ensure ordering WRT other macros. These are defined to * perform host-endian accesses so we use __raw instead of __cpu. */ #define __io_reads_ins(port, ctype, len, bfence, afence) \ static inline void __ ## port ## len(const volatile void __iomem *addr, \ void *buffer, \ unsigned int count) \ { \ bfence; \ if (count) { \ ctype *buf = buffer; \ \ do { \ ctype x = __raw_read ## len(addr); \ *buf++ = x; \ } while (--count); \ } \ afence; \ } #define __io_writes_outs(port, ctype, len, bfence, afence) \ static inline void __ ## port ## len(volatile void __iomem *addr, \ const void *buffer, \ unsigned int count) \ { \ bfence; \ if (count) { \ const ctype *buf = buffer; \ \ do { \ __raw_write ## len(*buf++, addr); \ } while (--count); \ } \ afence; \ } __io_reads_ins(reads, u8, b, __io_br(), __io_ar(addr)) __io_reads_ins(reads, u16, w, __io_br(), __io_ar(addr)) __io_reads_ins(reads, u32, l, __io_br(), __io_ar(addr)) #define readsb(addr, buffer, count) __readsb(addr, buffer, count) #define readsw(addr, buffer, count) __readsw(addr, buffer, count) #define readsl(addr, buffer, count) __readsl(addr, buffer, count) __io_reads_ins(ins, u8, b, __io_pbr(), __io_par(addr)) __io_reads_ins(ins, u16, w, __io_pbr(), __io_par(addr)) __io_reads_ins(ins, u32, l, __io_pbr(), __io_par(addr)) #define insb(addr, buffer, count) __insb((void __iomem *)(long)addr, buffer, count) #define insw(addr, buffer, count) __insw((void __iomem *)(long)addr, buffer, count) #define insl(addr, buffer, count) __insl((void __iomem *)(long)addr, buffer, count) __io_writes_outs(writes, u8, b, __io_bw(), __io_aw()) __io_writes_outs(writes, u16, w, __io_bw(), __io_aw()) __io_writes_outs(writes, u32, l, __io_bw(), __io_aw()) #define writesb(addr, buffer, count) __writesb(addr, buffer, count) #define writesw(addr, buffer, count) __writesw(addr, buffer, count) #define writesl(addr, buffer, count) __writesl(addr, buffer, count) __io_writes_outs(outs, u8, b, __io_pbw(), __io_paw()) __io_writes_outs(outs, u16, w, __io_pbw(), __io_paw()) __io_writes_outs(outs, u32, l, __io_pbw(), __io_paw()) #define outsb(addr, buffer, count) __outsb((void __iomem *)(long)addr, buffer, count) #define outsw(addr, buffer, count) __outsw((void __iomem *)(long)addr, buffer, count) #define outsl(addr, buffer, count) __outsl((void __iomem *)(long)addr, buffer, count) #ifdef CONFIG_64BIT __io_reads_ins(reads, u64, q, __io_br(), __io_ar(addr)) #define readsq(addr, buffer, count) __readsq(addr, buffer, count) __io_reads_ins(ins, u64, q, __io_pbr(), __io_par(addr)) #define insq(addr, buffer, count) __insq((void __iomem *)addr, buffer, count) __io_writes_outs(writes, u64, q, __io_bw(), __io_aw()) #define writesq(addr, buffer, count) __writesq(addr, buffer, count) __io_writes_outs(outs, u64, q, __io_pbr(), __io_paw()) #define outsq(addr, buffer, count) __outsq((void __iomem *)addr, buffer, count) #endif #include #endif /* _ASM_RISCV_IO_H */