// SPDX-License-Identifier: GPL-2.0-or-later /* * MPC8313E RDB Device Tree Source * * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. */ /dts-v1/; / { model = "MPC8313ERDB"; compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; #address-cells = <1>; #size-cells = <1>; aliases { ethernet0 = &enet0; ethernet1 = &enet1; serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; }; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8313@0 { device_type = "cpu"; reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <16384>; i-cache-size = <16384>; timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; reg = <0x00000000 0x08000000>; // 128MB at 0 }; localbus@e0005000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; reg = <0xe0005000 0x1000>; interrupts = <77 0x8>; interrupt-parent = <&ipic>; // CS0 and CS1 are swapped when // booting from nand, but the // addresses are the same. ranges = <0x0 0x0 0xfe000000 0x00800000 0x1 0x0 0xe2800000 0x00008000 0x2 0x0 0xf0000000 0x00020000 0x3 0x0 0xfa000000 0x00008000>; flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x800000>; bank-width = <2>; device-width = <1>; }; nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8313-fcm-nand", "fsl,elbc-fcm-nand"; reg = <0x1 0x0 0x2000>; u-boot@0 { reg = <0x0 0x100000>; read-only; }; kernel@100000 { reg = <0x100000 0x300000>; }; fs@400000 { reg = <0x400000 0x1c00000>; }; }; }; soc8313@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; }; sleep-nexus { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; sleep = <&pmc 0x03000000>; ranges; i2c@3000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; crypto@30000 { compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; fsl,num-channels = <1>; fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x4c>; fsl,descriptor-types-mask = <0x0122003f>; }; }; i2c@3100 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; interrupts = <15 0x8>; interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { cell-index = <0>; compatible = "fsl,spi"; reg = <0x7000 0x1000>; interrupts = <16 0x8>; interrupt-parent = <&ipic>; mode = "cpu"; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; phy_type = "utmi_wide"; sleep = <&pmc 0x00300000>; }; ptp_clock@24E00 { compatible = "fsl,etsec-ptp"; reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; interrupt-parent = < &ipic >; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; fsl,tmr-add = <0x999999A4>; fsl,tmr-fiper1 = <0x3B9AC9F6>; fsl,tmr-fiper2 = <0x00018696>; fsl,max-adj = <659999998>; }; enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; sleep = <&pmc 0x20000000>; ranges = <0x0 0x24000 0x1000>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 0x8 36 0x8 35 0x8>; interrupt-parent = <&ipic>; tbi-handle = < &tbi0 >; /* Vitesse 7385 isn't on the MDIO bus */ fixed-link = <1 1 1000 0 0>; fsl,magic-packet; mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; reg = <0x520 0x20>; phy4: ethernet-phy@4 { interrupt-parent = <&ipic>; interrupts = <20 0x8>; reg = <0x4>; }; tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; }; enet1: ethernet@25000 { #address-cells = <1>; #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <34 0x8 33 0x8 32 0x8>; interrupt-parent = <&ipic>; tbi-handle = < &tbi1 >; phy-handle = < &phy4 >; sleep = <&pmc 0x10000000>; fsl,magic-packet; mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-tbi"; reg = <0x520 0x20>; tbi1: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; }; serial0: serial@4500 { cell-index = <0>; device_type = "serial"; compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; interrupt-parent = <&ipic>; }; serial1: serial@4600 { cell-index = <1>; device_type = "serial"; compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; interrupt-parent = <&ipic>; }; /* IPIC * interrupts cell = * sense values match linux IORESOURCE_IRQ_* defines: * sense == 8: Level, low assertion * sense == 2: Edge, high-to-low change */ ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <0x700 0x100>; device_type = "ipic"; }; pmc: power@b00 { compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; reg = <0xb00 0x100 0xa00 0x100>; interrupts = <80 8>; interrupt-parent = <&ipic>; fsl,mpc8313-wakeup-timer = <>m1>; /* Remove this (or change to "okay") if you have * a REVA3 or later board, if you apply one of the * workarounds listed in section 8.5 of the board * manual, or if you are adapting this device tree * to a different board. */ status = "fail"; }; gtm1: timer@500 { compatible = "fsl,mpc8313-gtm", "fsl,gtm"; reg = <0x500 0x100>; interrupts = <90 8 78 8 84 8 72 8>; interrupt-parent = <&ipic>; }; timer@600 { compatible = "fsl,mpc8313-gtm", "fsl,gtm"; reg = <0x600 0x100>; interrupts = <91 8 79 8 85 8 73 8>; interrupt-parent = <&ipic>; }; }; sleep-nexus { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; sleep = <&pmc 0x00010000>; ranges; pci0: pci@e0008500 { cell-index = <1>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ 0x7000 0x0 0x0 0x1 &ipic 18 0x8 0x7000 0x0 0x0 0x2 &ipic 18 0x8 0x7000 0x0 0x0 0x3 &ipic 18 0x8 0x7000 0x0 0x0 0x4 &ipic 18 0x8 /* IDSEL 0x0F - PCI slot */ 0x7800 0x0 0x0 0x1 &ipic 17 0x8 0x7800 0x0 0x0 0x2 &ipic 18 0x8 0x7800 0x0 0x0 0x3 &ipic 17 0x8 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; interrupt-parent = <&ipic>; interrupts = <66 0x8>; bus-range = <0x0 0x0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xe0008500 0x100 /* internal registers */ 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; dma@82a8 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; reg = <0xe00082a8 4>; ranges = <0 0xe0008100 0x1a8>; interrupt-parent = <&ipic>; interrupts = <71 8>; dma-channel@0 { compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; reg = <0 0x28>; interrupt-parent = <&ipic>; interrupts = <71 8>; cell-index = <0>; }; dma-channel@80 { compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; reg = <0x80 0x28>; interrupt-parent = <&ipic>; interrupts = <71 8>; cell-index = <1>; }; dma-channel@100 { compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; reg = <0x100 0x28>; interrupt-parent = <&ipic>; interrupts = <71 8>; cell-index = <2>; }; dma-channel@180 { compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; reg = <0x180 0x28>; interrupt-parent = <&ipic>; interrupts = <71 8>; cell-index = <3>; }; }; }; };