From 781f0766cc41a9dd2e5d118ef4b1d5d89430257b Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 19 Oct 2018 16:14:50 +0800 Subject: USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/quirks.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index b7a99ce56bc9..a1be64c9940f 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -66,4 +66,7 @@ /* Device needs a pause after every control message. */ #define USB_QUIRK_DELAY_CTRL_MSG BIT(13) +/* Hub needs extra delay after resetting its port. */ +#define USB_QUIRK_HUB_SLOW_RESET BIT(14) + #endif /* __LINUX_USB_QUIRKS_H */ -- cgit v1.2.3