From d930d56825e934dc464cdad3f909333f994a89f3 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 18 May 2015 00:13:33 +0200 Subject: ARM: imx: clk-vf610: enable debug access port by default Enabled DAP (debug access port) by default. This enables the hw- breakpoint framework to make use of the breakpoints and watchpoints supported by hardware. [ 0.215805] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.224624] hw-breakpoint: maximum watchpoint size is 4 bytes. Without this clock, the hw-breakpoint driver claims an undefined instruction during initialization: [ 0.227380] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0 [ 0.227519] hw-breakpoint: CPU 0 failed to disable vector catch Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- drivers/clk/imx/clk-vf610.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/clk/imx/clk-vf610.c') diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c index 61876ed6e11e..1c2d3240efe7 100644 --- a/drivers/clk/imx/clk-vf610.c +++ b/drivers/clk/imx/clk-vf610.c @@ -118,6 +118,7 @@ static struct clk_onecell_data clk_data; static unsigned int const clks_init_on[] __initconst = { VF610_CLK_SYS_BUS, VF610_CLK_DDR_SEL, + VF610_CLK_DAP, }; static struct clk * __init vf610_get_fixed_clock( @@ -383,6 +384,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2)); clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7)); + clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24); imx_check_clocks(clk, ARRAY_SIZE(clk)); -- cgit v1.2.3