From c9c53749375ccce0191f89b86732e642f914bd82 Mon Sep 17 00:00:00 2001 From: Laurence Oberman Date: Wed, 11 Sep 2019 09:56:42 -0400 Subject: scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF The qla2xxx driver had this issue as well when the newer array firmware returned the retry_delay_timer in the fcp_rsp. The bnx2fc is not handling the masking of the scope bits either so the retry_delay_timestamp value lands up being a large value added to the timer timestamp delaying I/O for up to 27 Minutes. This patch adds similar code to handle this to the bnx2fc driver to avoid the huge delay. Link: https://lore.kernel.org/r/1568210202-12794-1-git-send-email-loberman@redhat.com Signed-off-by: Laurence Oberman Reported-by: David Jeffery Reported-by: kbuild test robot Signed-off-by: Martin K. Petersen --- drivers/scsi/bnx2fc/bnx2fc_io.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index da00ca5fa5dc..401743e2b429 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -1923,6 +1923,7 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req, struct fcoe_fcp_rsp_payload *fcp_rsp; struct bnx2fc_rport *tgt = io_req->tgt; struct scsi_cmnd *sc_cmd; + u16 scope = 0, qualifier = 0; /* scsi_cmd_cmpl is called with tgt lock held */ @@ -1990,12 +1991,30 @@ void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req, if (io_req->cdb_status == SAM_STAT_TASK_SET_FULL || io_req->cdb_status == SAM_STAT_BUSY) { - /* Set the jiffies + retry_delay_timer * 100ms - for the rport/tgt */ - tgt->retry_delay_timestamp = jiffies + - fcp_rsp->retry_delay_timer * HZ / 10; + /* Newer array firmware with BUSY or + * TASK_SET_FULL may return a status that needs + * the scope bits masked. + * Or a huge delay timestamp up to 27 minutes + * can result. + */ + if (fcp_rsp->retry_delay_timer) { + /* Upper 2 bits */ + scope = fcp_rsp->retry_delay_timer + & 0xC000; + /* Lower 14 bits */ + qualifier = fcp_rsp->retry_delay_timer + & 0x3FFF; + } + if (scope > 0 && qualifier > 0 && + qualifier <= 0x3FEF) { + /* Set the jiffies + + * retry_delay_timer * 100ms + * for the rport/tgt + */ + tgt->retry_delay_timestamp = jiffies + + (qualifier * HZ / 10); + } } - } if (io_req->fcp_resid) scsi_set_resid(sc_cmd, io_req->fcp_resid); -- cgit v1.2.3 From f51913eef23f74c3bd07899dc7f1ed6df9e521d8 Mon Sep 17 00:00:00 2001 From: Stanley Chu Date: Wed, 18 Sep 2019 12:20:38 +0800 Subject: scsi: ufs: skip shutdown if hba is not powered In some cases, hba may go through shutdown flow without successful initialization and then make system hang. For example, if ufshcd_change_power_mode() gets error and leads to ufshcd_hba_exit() to release resources of the host, future shutdown flow may hang the system since the host register will be accessed in unpowered state. To solve this issue, simply add checking to skip shutdown for above kind of situation. Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.com Signed-off-by: Stanley Chu Acked-by: Bean Huo Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index c4a015e42045..57b2c3a8def3 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -8140,6 +8140,9 @@ int ufshcd_shutdown(struct ufs_hba *hba) { int ret = 0; + if (!hba->is_powered) + goto out; + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) goto out; -- cgit v1.2.3 From 4b062e7cf940aa4f38fedc3a964b24cb095373f0 Mon Sep 17 00:00:00 2001 From: Austin Kim Date: Thu, 19 Sep 2019 16:55:48 +0900 Subject: scsi: qedf: Remove always false 'tmp_prio < 0' statement Since tmp_prio is declared as u8, the following statement is always false. tmp_prio < 0 So remove 'always false' statement. Link: https://lore.kernel.org/r/20190919075548.GA112801@LGEARND20B15 Signed-off-by: Austin Kim Acked-by: Saurav Kashyap Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 9c24f3834d70..1d2c111bdf82 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -596,7 +596,7 @@ static void qedf_dcbx_handler(void *dev, struct qed_dcbx_get *get, u32 mib_type) tmp_prio = get->operational.app_prio.fcoe; if (qedf_default_prio > -1) qedf->prio = qedf_default_prio; - else if (tmp_prio < 0 || tmp_prio > 7) { + else if (tmp_prio > 7) { QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "FIP/FCoE prio %d out of range, setting to %d.\n", tmp_prio, QEDF_DEFAULT_PRIO); -- cgit v1.2.3 From 0ed8810276907c8a633dc8cecc48dabb6678cd23 Mon Sep 17 00:00:00 2001 From: Long Li Date: Fri, 6 Sep 2019 10:24:20 -0700 Subject: scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue storvsc doesn't use a dedicated hardware queue for a given CPU queue. When issuing I/O, it selects returning CPU (hardware queue) dynamically based on vmbus channel usage across all channels. This patch advertises num_present_cpus() as number of hardware queues. This will have upper layer setup 1:1 mapping between hardware queue and CPU queue and avoid unnecessary locking when issuing I/O. Link: https://lore.kernel.org/r/1567790660-48142-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Long Li Reviewed-by: Michael Kelley Signed-off-by: Martin K. Petersen --- drivers/scsi/storvsc_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index ed8b9ac805e6..542d2bac2922 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1837,8 +1837,7 @@ static int storvsc_probe(struct hv_device *device, /* * Set the number of HW queues we are supporting. */ - if (stor_device->num_sc != 0) - host->nr_hw_queues = stor_device->num_sc + 1; + host->nr_hw_queues = num_present_cpus(); /* * Set the error handler work queue. -- cgit v1.2.3 From 70054aa39a013fa52eff432f2223b8bd5c0048f8 Mon Sep 17 00:00:00 2001 From: Xiang Chen Date: Sat, 7 Sep 2019 09:07:30 +0800 Subject: scsi: megaraid: disable device when probe failed after enabled device For pci device, need to disable device when probe failed after enabled device. Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen Reviewed-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 45a66048801b..ff6d4aa92421 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4183,11 +4183,11 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ && pdev->subsystem_device == 0xC000) - return -ENODEV; + goto out_disable_device; /* Now check the magic signature byte */ pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic); if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE) - return -ENODEV; + goto out_disable_device; /* Ok it is probably a megaraid */ } -- cgit v1.2.3 From 4b6b1bb68628ec49e4cbfabd8ac17a169f079cd8 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Mon, 23 Sep 2019 13:40:35 +0800 Subject: scsi: hisi_sas: Make three functions static Fix sparse warnings: drivers/scsi/hisi_sas/hisi_sas_main.c:3686:6: warning: symbol 'hisi_sas_debugfs_release' was not declared. Should it be static? drivers/scsi/hisi_sas/hisi_sas_main.c:3708:5: warning: symbol 'hisi_sas_debugfs_alloc' was not declared. Should it be static? drivers/scsi/hisi_sas/hisi_sas_main.c:3799:6: warning: symbol 'hisi_sas_debugfs_bist_init' was not declared. Should it be static? Link: https://lore.kernel.org/r/20190923054035.19036-1-yuehaibing@huawei.com Reported-by: Hulk Robot Signed-off-by: YueHaibing Acked-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index d1513fdf1e00..0847e682797b 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -3683,7 +3683,7 @@ void hisi_sas_debugfs_work_handler(struct work_struct *work) } EXPORT_SYMBOL_GPL(hisi_sas_debugfs_work_handler); -void hisi_sas_debugfs_release(struct hisi_hba *hisi_hba) +static void hisi_sas_debugfs_release(struct hisi_hba *hisi_hba) { struct device *dev = hisi_hba->dev; int i; @@ -3705,7 +3705,7 @@ void hisi_sas_debugfs_release(struct hisi_hba *hisi_hba) devm_kfree(dev, hisi_hba->debugfs_port_reg[i]); } -int hisi_sas_debugfs_alloc(struct hisi_hba *hisi_hba) +static int hisi_sas_debugfs_alloc(struct hisi_hba *hisi_hba) { const struct hisi_sas_hw *hw = hisi_hba->hw; struct device *dev = hisi_hba->dev; @@ -3796,7 +3796,7 @@ fail: return -ENOMEM; } -void hisi_sas_debugfs_bist_init(struct hisi_hba *hisi_hba) +static void hisi_sas_debugfs_bist_init(struct hisi_hba *hisi_hba) { hisi_hba->debugfs_bist_dentry = debugfs_create_dir("bist", hisi_hba->debugfs_dir); -- cgit v1.2.3 From 248a445adfc8c33ffd67cf1f2e336578e34f9e21 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 12 Sep 2019 11:09:05 -0700 Subject: scsi: qla2xxx: Silence fwdump template message Print if fwdt template is present or not, only when ql2xextended_error_logging is enabled. Link: https://lore.kernel.org/r/20190912180918.6436-2-hmadhani@marvell.com Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b6cdf108994c..f6a5d78f93c9 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3190,7 +3190,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) for (j = 0; j < 2; j++, fwdt++) { if (!fwdt->template) { - ql_log(ql_log_warn, vha, 0x00ba, + ql_dbg(ql_dbg_init, vha, 0x00ba, "-> fwdt%u no template\n", j); continue; } -- cgit v1.2.3 From c3b6a1d397420a0fdd97af2f06abfb78adc370df Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Thu, 12 Sep 2019 11:09:06 -0700 Subject: scsi: qla2xxx: Fix unbound sleep in fcport delete path. There are instances, though rare, where a LOGO request cannot be sent out and the thread in free session done can wait indefinitely. Fix this by putting an upper bound to sleep. Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0ffda6171614..b58ecd2d7fb6 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1020,6 +1020,7 @@ void qlt_free_session_done(struct work_struct *work) if (logout_started) { bool traced = false; + u16 cnt = 0; while (!READ_ONCE(sess->logout_completed)) { if (!traced) { @@ -1029,6 +1030,9 @@ void qlt_free_session_done(struct work_struct *work) traced = true; } msleep(100); + cnt++; + if (cnt > 200) + break; } ql_dbg(ql_dbg_disc, vha, 0xf087, -- cgit v1.2.3 From fd5564ba54e0d8a9e3e823d311b764232e09eb5f Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Thu, 12 Sep 2019 11:09:07 -0700 Subject: scsi: qla2xxx: Fix stale mem access on driver unload On driver unload, 'remove_one' thread was allowed to advance, while session cleanup still lag behind. This patch ensures session deletion will finish before remove_one can advance. Link: https://lore.kernel.org/r/20190912180918.6436-4-hmadhani@marvell.com Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 1 + drivers/scsi/qla2xxx/qla_target.c | 21 ++++++++------------- 2 files changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 51154c049385..42980e52fb41 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1118,6 +1118,7 @@ qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha) qla2x00_mark_all_devices_lost(vha, 0); wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ); + flush_workqueue(vha->hw->wq); } /* diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index b58ecd2d7fb6..b5315be00b4d 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -953,7 +953,7 @@ void qlt_free_session_done(struct work_struct *work) struct qla_hw_data *ha = vha->hw; unsigned long flags; bool logout_started = false; - scsi_qla_host_t *base_vha; + scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); struct qlt_plogi_ack_t *own = sess->plogi_link[QLT_PLOGI_LINK_SAME_WWN]; @@ -1105,6 +1105,7 @@ void qlt_free_session_done(struct work_struct *work) } spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + sess->free_pending = 0; ql_dbg(ql_dbg_tgt_mgt, vha, 0xf001, "Unregistration of sess %p %8phC finished fcp_cnt %d\n", @@ -1113,17 +1114,8 @@ void qlt_free_session_done(struct work_struct *work) if (tgt && (tgt->sess_count == 0)) wake_up_all(&tgt->waitQ); - if (vha->fcport_count == 0) - wake_up_all(&vha->fcport_waitQ); - - base_vha = pci_get_drvdata(ha->pdev); - - sess->free_pending = 0; - - if (test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags)) - return; - - if ((!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) { + if (!test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags) && + (!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) { switch (vha->host->active_mode) { case MODE_INITIATOR: case MODE_DUAL: @@ -1136,6 +1128,9 @@ void qlt_free_session_done(struct work_struct *work) break; } } + + if (vha->fcport_count == 0) + wake_up_all(&vha->fcport_waitQ); } /* ha->tgt.sess_lock supposed to be held on entry */ @@ -1165,7 +1160,7 @@ void qlt_unreg_sess(struct fc_port *sess) sess->last_login_gen = sess->login_gen; INIT_WORK(&sess->free_work, qlt_free_session_done); - schedule_work(&sess->free_work); + queue_work(sess->vha->hw->wq, &sess->free_work); } EXPORT_SYMBOL(qlt_unreg_sess); -- cgit v1.2.3 From f5187b7d1ac66b61676f896751d3af9fcf8dd592 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Thu, 12 Sep 2019 11:09:08 -0700 Subject: scsi: qla2xxx: Optimize NPIV tear down process In the case of NPIV port is being torn down, this patch will set a flag to indicate VPORT_DELETE. This would prevent relogin to be triggered. Link: https://lore.kernel.org/r/20190912180918.6436-5-hmadhani@marvell.com Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_attr.c | 2 ++ drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_gs.c | 3 ++- drivers/scsi/qla2xxx/qla_mid.c | 32 ++++++++++++++++++++++---------- drivers/scsi/qla2xxx/qla_os.c | 7 ++++++- drivers/scsi/qla2xxx/qla_target.c | 1 + 6 files changed, 34 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index e9c449ef515c..8b3015361428 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -2920,6 +2920,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) struct qla_hw_data *ha = vha->hw; uint16_t id = vha->vp_idx; + set_bit(VPORT_DELETE, &vha->dpc_flags); + while (test_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags) || test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) msleep(1000); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 873a6aef1c5c..fa038568beb6 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -4394,6 +4394,7 @@ typedef struct scsi_qla_host { #define IOCB_WORK_ACTIVE 31 #define SET_ZIO_THRESHOLD_NEEDED 32 #define ISP_ABORT_TO_ROM 33 +#define VPORT_DELETE 34 unsigned long pci_flags; #define PFLG_DISCONNECTED 0 /* PCI device removed */ diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index dc0e36676313..5298ed10059f 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3102,7 +3102,8 @@ int qla24xx_post_gpnid_work(struct scsi_qla_host *vha, port_id_t *id) { struct qla_work_evt *e; - if (test_bit(UNLOADING, &vha->dpc_flags)) + if (test_bit(UNLOADING, &vha->dpc_flags) || + (vha->vp_idx && test_bit(VPORT_DELETE, &vha->dpc_flags))) return 0; e = qla2x00_alloc_work(vha, QLA_EVT_GPNID); diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 1a9a11ae7285..6afad68e5ba2 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -66,6 +66,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) uint16_t vp_id; struct qla_hw_data *ha = vha->hw; unsigned long flags = 0; + u8 i; mutex_lock(&ha->vport_lock); /* @@ -75,8 +76,9 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) * ensures no active vp_list traversal while the vport is removed * from the queue) */ - wait_event_timeout(vha->vref_waitq, !atomic_read(&vha->vref_count), - 10*HZ); + for (i = 0; i < 10 && atomic_read(&vha->vref_count); i++) + wait_event_timeout(vha->vref_waitq, + atomic_read(&vha->vref_count), HZ); spin_lock_irqsave(&ha->vport_slock, flags); if (atomic_read(&vha->vref_count)) { @@ -262,6 +264,9 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb) spin_lock_irqsave(&ha->vport_slock, flags); list_for_each_entry(vha, &ha->vp_list, list) { if (vha->vp_idx) { + if (test_bit(VPORT_DELETE, &vha->dpc_flags)) + continue; + atomic_inc(&vha->vref_count); spin_unlock_irqrestore(&ha->vport_slock, flags); @@ -300,6 +305,20 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb) int qla2x00_vp_abort_isp(scsi_qla_host_t *vha) { + fc_port_t *fcport; + + /* + * To exclusively reset vport, we need to log it out first. + * Note: This control_vp can fail if ISP reset is already + * issued, this is expected, as the vp would be already + * logged out due to ISP reset. + */ + if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) { + qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); + list_for_each_entry(fcport, &vha->vp_fcports, list) + fcport->logout_on_delete = 0; + } + /* * Physical port will do most of the abort and recovery work. We can * just treat it as a loop down @@ -312,16 +331,9 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha) atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); } - /* - * To exclusively reset vport, we need to log it out first. Note: this - * control_vp can fail if ISP reset is already issued, this is - * expected, as the vp would be already logged out due to ISP reset. - */ - if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) - qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); - ql_dbg(ql_dbg_taskm, vha, 0x801d, "Scheduling enable of Vport %d.\n", vha->vp_idx); + return qla24xx_enable_vp(vha); } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 42980e52fb41..5eda86ff6606 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1115,9 +1115,14 @@ static inline int test_fcport_count(scsi_qla_host_t *vha) void qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha) { + u8 i; + qla2x00_mark_all_devices_lost(vha, 0); - wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ); + for (i = 0; i < 10; i++) + wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), + HZ); + flush_workqueue(vha->hw->wq); } diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index b5315be00b4d..a06e56224a55 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1115,6 +1115,7 @@ void qlt_free_session_done(struct work_struct *work) wake_up_all(&tgt->waitQ); if (!test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags) && + !(vha->vp_idx && test_bit(VPORT_DELETE, &vha->dpc_flags)) && (!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) { switch (vha->host->active_mode) { case MODE_INITIATOR: -- cgit v1.2.3 From 7f2a398d59d658818f3d219645164676fbbc88e8 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Thu, 12 Sep 2019 11:09:09 -0700 Subject: scsi: qla2xxx: Fix N2N link reset Fix stalled link recovery for N2N with FC-NVMe connection. Link: https://lore.kernel.org/r/20190912180918.6436-6-hmadhani@marvell.com Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_def.h | 3 +- drivers/scsi/qla2xxx/qla_init.c | 107 +++++++++++++++++++++++++++++----------- drivers/scsi/qla2xxx/qla_mbx.c | 23 +++++++-- drivers/scsi/qla2xxx/qla_os.c | 4 ++ 4 files changed, 103 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index fa038568beb6..6ffa9877c28b 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2396,6 +2396,7 @@ typedef struct fc_port { unsigned int query:1; unsigned int id_changed:1; unsigned int scan_needed:1; + unsigned int n2n_flag:1; struct completion nvme_del_done; uint32_t nvme_prli_service_param; @@ -2446,7 +2447,6 @@ typedef struct fc_port { uint8_t fc4_type; uint8_t fc4f_nvme; uint8_t scan_state; - uint8_t n2n_flag; unsigned long last_queue_full; unsigned long last_ramp_up; @@ -3036,6 +3036,7 @@ enum scan_flags_t { enum fc4type_t { FS_FC4TYPE_FCP = BIT_0, FS_FC4TYPE_NVME = BIT_1, + FS_FCP_IS_N2N = BIT_7, }; struct fab_scan_rp { diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index f6a5d78f93c9..67f522a8a9d4 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -746,12 +746,15 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, break; default: if ((id.b24 != fcport->d_id.b24 && - fcport->d_id.b24) || + fcport->d_id.b24 && + fcport->loop_id != FC_NO_LOOP_ID) || (fcport->loop_id != FC_NO_LOOP_ID && fcport->loop_id != loop_id)) { ql_dbg(ql_dbg_disc, vha, 0x20e3, "%s %d %8phC post del sess\n", __func__, __LINE__, fcport->port_name); + if (fcport->n2n_flag) + fcport->d_id.b24 = 0; qlt_schedule_sess_for_deletion(fcport); return; } @@ -759,6 +762,8 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, } fcport->loop_id = loop_id; + if (fcport->n2n_flag) + fcport->d_id.b24 = id.b24; wwn = wwn_to_u64(fcport->port_name); qlt_find_sess_invalidate_other(vha, wwn, @@ -972,7 +977,7 @@ static void qla24xx_async_gnl_sp_done(srb_t *sp, int res) wwn = wwn_to_u64(e->port_name); ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0x20e8, - "%s %8phC %02x:%02x:%02x state %d/%d lid %x \n", + "%s %8phC %02x:%02x:%02x CLS %x/%x lid %x \n", __func__, (void *)&wwn, e->port_id[2], e->port_id[1], e->port_id[0], e->current_login_state, e->last_login_state, (loop_id & 0x7fff)); @@ -1499,7 +1504,8 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) (fcport->fw_login_state == DSC_LS_PRLI_PEND))) return 0; - if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) { + if (fcport->fw_login_state == DSC_LS_PLOGI_COMP && + !N2N_TOPO(vha->hw)) { if (time_before_eq(jiffies, fcport->plogi_nack_done_deadline)) { set_bit(RELOGIN_NEEDED, &vha->dpc_flags); return 0; @@ -1570,8 +1576,9 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) qla24xx_post_gpdb_work(vha, fcport, 0); } else { ql_dbg(ql_dbg_disc, vha, 0x2118, - "%s %d %8phC post NVMe PRLI\n", - __func__, __LINE__, fcport->port_name); + "%s %d %8phC post %s PRLI\n", + __func__, __LINE__, fcport->port_name, + fcport->fc4f_nvme ? "NVME" : "FC"); qla24xx_post_prli_work(vha, fcport); } break; @@ -1853,17 +1860,38 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea) break; } - if (ea->fcport->n2n_flag) { + if (ea->fcport->fc4f_nvme) { ql_dbg(ql_dbg_disc, vha, 0x2118, "%s %d %8phC post fc4 prli\n", __func__, __LINE__, ea->fcport->port_name); ea->fcport->fc4f_nvme = 0; - ea->fcport->n2n_flag = 0; qla24xx_post_prli_work(vha, ea->fcport); + return; + } + + /* at this point both PRLI NVME & PRLI FCP failed */ + if (N2N_TOPO(vha->hw)) { + if (ea->fcport->n2n_link_reset_cnt < 3) { + ea->fcport->n2n_link_reset_cnt++; + /* + * remote port is not sending Plogi. Reset + * link to kick start his state machine + */ + set_bit(N2N_LINK_RESET, &vha->dpc_flags); + } else { + ql_log(ql_log_warn, vha, 0x2119, + "%s %d %8phC Unable to reconnect\n", + __func__, __LINE__, ea->fcport->port_name); + } + } else { + /* + * switch connect. login failed. Take connection + * down and allow relogin to retrigger + */ + ea->fcport->flags &= ~FCF_ASYNC_SENT; + ea->fcport->keep_nport_handle = 0; + qlt_schedule_sess_for_deletion(ea->fcport); } - ql_dbg(ql_dbg_disc, vha, 0x2119, - "%s %d %8phC unhandle event of %x\n", - __func__, __LINE__, ea->fcport->port_name, ea->data[0]); break; } } @@ -5000,28 +5028,47 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha) unsigned long flags; /* Inititae N2N login. */ - if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) { - /* borrowing */ - u32 *bp, i, sz; - - memset(ha->init_cb, 0, ha->init_cb_size); - sz = min_t(int, sizeof(struct els_plogi_payload), - ha->init_cb_size); - rval = qla24xx_get_port_login_templ(vha, ha->init_cb_dma, - (void *)ha->init_cb, sz); - if (rval == QLA_SUCCESS) { - bp = (uint32_t *)ha->init_cb; - for (i = 0; i < sz/4 ; i++, bp++) - *bp = cpu_to_be32(*bp); + if (N2N_TOPO(ha)) { + if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) { + /* borrowing */ + u32 *bp, i, sz; + + memset(ha->init_cb, 0, ha->init_cb_size); + sz = min_t(int, sizeof(struct els_plogi_payload), + ha->init_cb_size); + rval = qla24xx_get_port_login_templ(vha, + ha->init_cb_dma, (void *)ha->init_cb, sz); + if (rval == QLA_SUCCESS) { + bp = (uint32_t *)ha->init_cb; + for (i = 0; i < sz/4 ; i++, bp++) + *bp = cpu_to_be32(*bp); - memcpy(&ha->plogi_els_payld.data, (void *)ha->init_cb, - sizeof(ha->plogi_els_payld.data)); - set_bit(RELOGIN_NEEDED, &vha->dpc_flags); - } else { - ql_dbg(ql_dbg_init, vha, 0x00d1, - "PLOGI ELS param read fail.\n"); + memcpy(&ha->plogi_els_payld.data, + (void *)ha->init_cb, + sizeof(ha->plogi_els_payld.data)); + set_bit(RELOGIN_NEEDED, &vha->dpc_flags); + } else { + ql_dbg(ql_dbg_init, vha, 0x00d1, + "PLOGI ELS param read fail.\n"); + goto skip_login; + } + } + + list_for_each_entry(fcport, &vha->vp_fcports, list) { + if (fcport->n2n_flag) { + qla24xx_fcport_handle_login(vha, fcport); + return QLA_SUCCESS; + } + } +skip_login: + spin_lock_irqsave(&vha->work_lock, flags); + vha->scan.scan_retry++; + spin_unlock_irqrestore(&vha->work_lock, flags); + + if (vha->scan.scan_retry < MAX_SCAN_RETRIES) { + set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); + set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); } - return QLA_SUCCESS; } found_devs = 0; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 4c858e2d0ea8..6d6e10812b42 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2249,7 +2249,7 @@ qla2x00_lip_reset(scsi_qla_host_t *vha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x105a, + ql_dbg(ql_dbg_disc, vha, 0x105a, "Entered %s.\n", __func__); if (IS_CNA_CAPABLE(vha->hw)) { @@ -3883,14 +3883,23 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, case TOPO_N2N: ha->current_topology = ISP_CFG_N; spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); + list_for_each_entry(fcport, &vha->vp_fcports, list) { + fcport->scan_state = QLA_FCPORT_SCAN; + fcport->n2n_flag = 0; + } + fcport = qla2x00_find_fcport_by_wwpn(vha, rptid_entry->u.f1.port_name, 1); spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags); if (fcport) { fcport->plogi_nack_done_deadline = jiffies + HZ; - fcport->dm_login_expire = jiffies + 3*HZ; + fcport->dm_login_expire = jiffies + 2*HZ; fcport->scan_state = QLA_FCPORT_FOUND; + fcport->n2n_flag = 1; + if (vha->flags.nvme_enabled) + fcport->fc4f_nvme = 1; + switch (fcport->disc_state) { case DSC_DELETED: set_bit(RELOGIN_NEEDED, @@ -3924,7 +3933,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, rptid_entry->u.f1.port_name, rptid_entry->u.f1.node_name, NULL, - FC4_TYPE_UNKNOWN); + FS_FCP_IS_N2N); } /* if our portname is higher then initiate N2N login */ @@ -4023,6 +4032,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, list_for_each_entry(fcport, &vha->vp_fcports, list) { fcport->scan_state = QLA_FCPORT_SCAN; + fcport->n2n_flag = 0; } fcport = qla2x00_find_fcport_by_wwpn(vha, @@ -4032,6 +4042,13 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, fcport->login_retry = vha->hw->login_retry_count; fcport->plogi_nack_done_deadline = jiffies + HZ; fcport->scan_state = QLA_FCPORT_FOUND; + fcport->n2n_flag = 1; + fcport->d_id.b.domain = + rptid_entry->u.f2.remote_nport_id[2]; + fcport->d_id.b.area = + rptid_entry->u.f2.remote_nport_id[1]; + fcport->d_id.b.al_pa = + rptid_entry->u.f2.remote_nport_id[0]; } } } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 5eda86ff6606..8411dd5acd43 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -5033,6 +5033,10 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e) memcpy(fcport->port_name, e->u.new_sess.port_name, WWN_SIZE); + + if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N) + fcport->n2n_flag = 1; + } else { ql_dbg(ql_dbg_disc, vha, 0xffff, "%s %8phC mem alloc fail.\n", -- cgit v1.2.3 From f3f1938bb673b1b5ad182c4608f5f8a24921eea3 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Thu, 12 Sep 2019 11:09:10 -0700 Subject: scsi: qla2xxx: Fix N2N link up fail During link up/bounce, qla driver would do command flush as part of cleanup. In this case, the flush can intefere with FW state. This patch allows FW to be in control of link up. Link: https://lore.kernel.org/r/20190912180918.6436-7-hmadhani@marvell.com Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_mbx.c | 2 ++ drivers/scsi/qla2xxx/qla_os.c | 6 ++---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 6d6e10812b42..1cc6913f76c4 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3897,6 +3897,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, fcport->dm_login_expire = jiffies + 2*HZ; fcport->scan_state = QLA_FCPORT_FOUND; fcport->n2n_flag = 1; + fcport->keep_nport_handle = 1; if (vha->flags.nvme_enabled) fcport->fc4f_nvme = 1; @@ -4042,6 +4043,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, fcport->login_retry = vha->hw->login_retry_count; fcport->plogi_nack_done_deadline = jiffies + HZ; fcport->scan_state = QLA_FCPORT_FOUND; + fcport->keep_nport_handle = 1; fcport->n2n_flag = 1; fcport->d_id.b.domain = rptid_entry->u.f2.remote_nport_id[2]; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8411dd5acd43..ee47de9fbc05 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -5135,11 +5135,9 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e) if (dfcp) qlt_schedule_sess_for_deletion(tfcp); - - if (N2N_TOPO(vha->hw)) - fcport->flags &= ~FCF_FABRIC_DEVICE; - if (N2N_TOPO(vha->hw)) { + fcport->flags &= ~FCF_FABRIC_DEVICE; + fcport->keep_nport_handle = 1; if (vha->flags.nvme_enabled) { fcport->fc4f_nvme = 1; fcport->n2n_flag = 1; -- cgit v1.2.3 From 0aabb6b699f72dca96988d3f428e222f932dc889 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Thu, 12 Sep 2019 11:09:11 -0700 Subject: scsi: qla2xxx: Fix Nport ID display value For N2N, the NPort ID is assigned by driver in the PLOGI ELS. According to FW Spec the byte order for SID is not the same as DID. Link: https://lore.kernel.org/r/20190912180918.6436-8-hmadhani@marvell.com Reviewed-by: Roman Bolshakov Tested-by: Roman Bolshakov Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_iocb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index e92e52aa6e9b..518eb954cf42 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -2656,9 +2656,10 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa; els_iocb->port_id[1] = sp->fcport->d_id.b.area; els_iocb->port_id[2] = sp->fcport->d_id.b.domain; - els_iocb->s_id[0] = vha->d_id.b.al_pa; - els_iocb->s_id[1] = vha->d_id.b.area; - els_iocb->s_id[2] = vha->d_id.b.domain; + /* For SID the byte order is different than DID */ + els_iocb->s_id[1] = vha->d_id.b.al_pa; + els_iocb->s_id[2] = vha->d_id.b.area; + els_iocb->s_id[0] = vha->d_id.b.domain; if (elsio->u.els_logo.els_cmd == ELS_DCMD_PLOGI) { els_iocb->control_flags = 0; -- cgit v1.2.3