aboutsummaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)Author
2017-03-07KVM: arm/arm64: VGIC: Fix command handling while ITS being disabledAndre Przywara
The ITS spec says that ITS commands are only processed when the ITS is enabled (section 8.19.4, Enabled, bit[0]). Our emulation was not taking this into account. Fix this by checking the enabled state before handling CWRITER writes. On the other hand that means that CWRITER could advance while the ITS is disabled, and enabling it would need those commands to be processed. Fix this case as well by refactoring actual command processing and calling this from both the GITS_CWRITER and GITS_CTLR handlers. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07KVM: arm/arm64: Let vcpu thread modify its own active stateJintack Lim
Currently, if a vcpu thread tries to change the active state of an interrupt which is already on the same vcpu's AP list, it will loop forever. Since the VGIC mmio handler is called after a vcpu has already synced back the LR state to the struct vgic_irq, we can just let it proceed safely. Cc: stable@vger.kernel.org Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-06KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypassMarc Zyngier
Our GICv3 emulation always presents ICC_SRE_EL1 with DIB/DFB set to zero, which implies that there is a way to bypass the GIC and inject raw IRQ/FIQ by driving the CPU pins. Of course, we don't allow that when the GIC is configured, but we fail to indicate that to the guest. The obvious fix is to set these bits (and never let them being changed again). Reported-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-04Merge tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Radim Krčmář: "Second batch of KVM changes for the 4.11 merge window: PPC: - correct assumption about ASDR on POWER9 - fix MMIO emulation on POWER9 x86: - add a simple test for ioperm - cleanup TSS (going through KVM tree as the whole undertaking was caused by VMX's use of TSS) - fix nVMX interrupt delivery - fix some performance counters in the guest ... and two cleanup patches" * tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Fix pending events injection x86/kvm/vmx: remove unused variable in segment_base() selftests/x86: Add a basic selftest for ioperm x86/asm: Tidy up TSS limit code kvm: convert kvm.users_count from atomic_t to refcount_t KVM: x86: never specify a sample period for virtualized in_tx_cp counters KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9 KVM: PPC: Book3S HV: Fix software walk of guest process page tables
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/stat.h> We are going to split <linux/sched/stat.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/stat.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/mm.h> We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/mm.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01kvm: convert kvm.users_count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-02-27mm: add new mmget() helperVegard Nossum
Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_users' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_users);/mmget\(\1\);/' git grep -l 'atomic_inc.*mm_users' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_users);/mmget\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-2-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27mm: add new mmgrab() helperVegard Nossum
Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/' git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-17KVM: Return an error code only as a constant in kvm_get_dirty_log()Markus Elfring
* Return an error code without storing it in an intermediate variable. * Delete the local variable "r" and the jump label "out" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17KVM: Return an error code only as a constant in kvm_get_dirty_log_protect()Markus Elfring
* Return an error code without storing it in an intermediate variable. * Delete the local variable "r" and the jump label "out" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17KVM: Return directly after a failed copy_from_user() in kvm_vm_compat_ioctl()Markus Elfring
* Return directly after a call of the function "copy_from_user" failed in a case block. This issue was detected by using the Coccinelle software. * Delete the jump label "out" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16KVM: Support vCPU-based gfn->hva cacheCao, Lei
Provide versions of struct gfn_to_hva_cache functions that take vcpu as a parameter instead of struct kvm. The existing functions are not needed anymore, so delete them. This allows dirty pages to be logged in the vcpu dirty ring, instead of the global dirty ring, for ring-based dirty memory tracking. Signed-off-by: Lei Cao <lei.cao@stratus.com> Message-Id: <CY1PR08MB19929BD2AC47A291FD680E83F04F0@CY1PR08MB1992.namprd08.prod.outlook.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16KVM: use separate generations for each address spacePaolo Bonzini
This will make it easier to support multiple address spaces in kvm_gfn_to_hva_cache_init. Instead of having to check the address space id, we can keep on checking just the generation number. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16KVM: only retrieve memslots once when initializing cachePaolo Bonzini
This will make it a bit simpler to handle multiple address spaces in gfn_to_hva_cache. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-08KVM: arm/arm64: Emulate the EL1 phys timer registersJintack Lim
Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Set up a background timer for the physical timer emulationJintack Lim
Set a background timer for the EL1 physical timer emulation while VMs are running, so that VMs get the physical timer interrupts in a timely manner. Schedule the background timer on entry to the VM and cancel it on exit. This would not have any performance impact to the guest OSes that currently use the virtual timer since the physical timer is always not enabled. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Set a background timer to the earliest timer expirationJintack Lim
When scheduling a background timer, consider both of the virtual and physical timer and pick the earliest expiration time. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Update the physical timer interrupt levelJintack Lim
Now that we maintain the EL1 physical timer register states of VMs, update the physical timer interrupt level along with the virtual one. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Initialize the emulated EL1 physical timerJintack Lim
Initialize the emulated EL1 physical timer with the default irq number. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Decouple kvm timer functions from virtual timerJintack Lim
Now that we have a separate structure for timer context, make functions generic so that they can work with any timer context, not just the virtual timer context. This does not change the virtual timer functionality. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Move cntvoff to each timer contextJintack Lim
Make cntvoff per each timer context. This is helpful to abstract kvm timer functions to work with timer context without considering timer types (e.g. physical timer or virtual timer). This also would pave the way for ever doing adjustments of the cntvoff on a per-CPU basis if that should ever make sense. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Abstract virtual timer context into separate structureJintack Lim
Abstract virtual timer context into a separate structure and change all callers referring to timer registers, irq state and so on. No change in functionality. This is about to become very handy when adding the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twiceShanker Donthineni
The IRQFD framework calls the architecture dependent function twice if the corresponding GSI type is edge triggered. For ARM, the function kvm_set_msi() is getting called twice whenever the IRQFD receives the event signal. The rest of the code path is trying to inject the MSI without any validation checks. No need to call the function vgic_its_inject_msi() second time to avoid an unnecessary overhead in IRQ queue logic. It also avoids the possibility of VM seeing the MSI twice. Simple fix, return -1 if the argument 'level' value is zero. Cc: stable@vger.kernel.org Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-01KVM: arm/arm64: Remove kvm_vgic_inject_mapped_irqChristoffer Dall
The only benefit of having kvm_vgic_inject_mapped_irq separate from kvm_vgic_inject_irq is that we pass a boolean that we use for error checking on the injection path. While this could potentially help in some aspect of robustness, it's also a little bit of a defensive move, and arguably callers into the vgic should have make sure they have marked their virtual IRQs as mapped if required. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-30KVM: arm/arm64: vgic: Implement KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO ioctlVijaya Kumar K
Userspace requires to store and restore of line_level for level triggered interrupts using ioctl KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30KVM: arm/arm64: vgic: Implement VGICv3 CPU interface accessVijaya Kumar K
VGICv3 CPU interface registers are accessed using KVM_DEV_ARM_VGIC_CPU_SYSREGS ioctl. These registers are accessed as 64-bit. The cpu MPIDR value is passed along with register id. It is used to identify the cpu for registers access. The VM that supports SEIs expect it on destination machine to handle guest aborts and hence checked for ICC_CTLR_EL1.SEIS compatibility. Similarly, VM that supports Affinity Level 3 that is required for AArch64 mode, is required to be supported on destination machine. Hence checked for ICC_CTLR_EL1.A3V compatibility. The arch/arm64/kvm/vgic-sys-reg-v3.c handles read and write of VGIC CPU registers for AArch64. For AArch32 mode, arch/arm/kvm/vgic-v3-coproc.c file is created but APIs are not implemented. Updated arch/arm/include/uapi/asm/kvm.h with new definitions required to compile for AArch32. The version of VGIC v3 specification is defined here Documentation/virtual/kvm/devices/arm-vgic-v3.txt Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30KVM: arm/arm64: vgic: Introduce VENG0 and VENG1 fields to vmcr structVijaya Kumar K
ICC_VMCR_EL2 supports virtual access to ICC_IGRPEN1_EL1.Enable and ICC_IGRPEN0_EL1.Enable fields. Add grpen0 and grpen1 member variables to struct vmcr to support read and write of these fields. Also refactor vgic_set_vmcr and vgic_get_vmcr() code. Drop ICH_VMCR_CTLR_SHIFT and ICH_VMCR_CTLR_MASK macros and instead use ICH_VMCR_EOI* and ICH_VMCR_CBPR* macros. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30KVM: arm/arm64: vgic: Add distributor and redistributor accessVijaya Kumar K
VGICv3 Distributor and Redistributor registers are accessed using KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_REDIST_REGS with KVM_SET_DEVICE_ATTR and KVM_GET_DEVICE_ATTR ioctls. These registers are accessed as 32-bit and cpu mpidr value passed along with register offset is used to identify the cpu for redistributor registers access. The version of VGIC v3 specification is defined here Documentation/virtual/kvm/devices/arm-vgic-v3.txt Also update arch/arm/include/uapi/asm/kvm.h to compile for AArch32 mode. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30KVM: arm/arm64: vgic: Implement support for userspace accessVijaya Kumar K
Read and write of some registers like ISPENDR and ICPENDR from userspace requires special handling when compared to guest access for these registers. Refer to Documentation/virtual/kvm/devices/arm-vgic-v3.txt for handling of ISPENDR, ICPENDR registers handling. Add infrastructure to support guest and userspace read and write for the required registers Also moved vgic_uaccess from vgic-mmio-v2.c to vgic-mmio.c Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-25KVM: arm/arm64: vgic: Add debugfs vgic-state fileChristoffer Dall
Add a file to debugfs to read the in-kernel state of the vgic. We don't do any locking of the entire VGIC state while traversing all the IRQs, so if the VM is running the user/developer may not see a quiesced state, but should take care to pause the VM using facilities in user space for that purpose. We also don't support LPIs yet, but they can be added easily if needed. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-25KVM: arm/arm64: Remove struct vgic_irq pending fieldChristoffer Dall
One of the goals behind the VGIC redesign was to get rid of cached or intermediate state in the data structures, but we decided to allow ourselves to precompute the pending value of an IRQ based on the line level and pending latch state. However, this has now become difficult to base proper GICv3 save/restore on, because there is a potential to modify the pending state without knowing if an interrupt is edge or level configured. See the following post and related message for more background: https://lists.cs.columbia.edu/pipermail/kvmarm/2017-January/023195.html This commit gets rid of the precomputed pending field in favor of a function that calculates the value when needed, irq_is_pending(). The soft_pending field is renamed to pending_latch to represent that this latch is the equivalent hardware latch which gets manipulated by the input signal for edge-triggered interrupts and when writing to the SPENDR/CPENDR registers. After this commit save/restore code should be able to simply restore the pending_latch state, line_level state, and config state in any order and get the desired result. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-17Merge tag 'kvm-arm-for-4.10-rc4' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for 4.10-rc4 - Fix for timer setup on VHE machines - Drop spurious warning when the timer races against the vcpu running again - Prevent a vgic deadlock when the initialization fails
2017-01-13KVM: arm/arm64: vgic: Fix deadlock on error handlingMarc Zyngier
Dmitry Vyukov reported that the syzkaller fuzzer triggered a deadlock in the vgic setup code when an error was detected, as the cleanup code tries to take a lock that is already held by the setup code. The fix is to avoid retaking the lock when cleaning up, by telling the cleanup function that we already hold it. Cc: stable@vger.kernel.org Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-13KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systemsJintack Lim
Current KVM world switch code is unintentionally setting wrong bits to CNTHCTL_EL2 when E2H == 1, which may allow guest OS to access physical timer. Bit positions of CNTHCTL_EL2 are changing depending on HCR_EL2.E2H bit. EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is not set, but they are 11th and 10th bits respectively when E2H is set. In fact, on VHE we only need to set those bits once, not for every world switch. This is because the host kernel runs in EL2 with HCR_EL2.TGE == 1, which makes those bits have no effect for the host kernel execution. So we just set those bits once for guests, and that's it. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-13KVM: arm/arm64: Fix occasional warning from the timer work functionChristoffer Dall
When a VCPU blocks (WFI) and has programmed the vtimer, we program a soft timer to expire in the future to wake up the vcpu thread when appropriate. Because such as wake up involves a vcpu kick, and the timer expire function can get called from interrupt context, and the kick may sleep, we have to schedule the kick in the work function. The work function currently has a warning that gets raised if it turns out that the timer shouldn't fire when it's run, which was added because the idea was that in that case the work should never have been cancelled. However, it turns out that this whole thing is racy and we can get spurious warnings. The problem is that we clear the armed flag in the work function, which may run in parallel with the kvm_timer_unschedule->timer_disarm() call. This results in a possible situation where the timer_disarm() call does not call cancel_work_sync(), which effectively synchronizes the completion of the work function with running the VCPU. As a result, the VCPU thread proceeds before the work function completees, causing changes to the timer state such that kvm_timer_should_fire(vcpu) returns false in the work function. All we do in the work function is to kick the VCPU, and an occasional rare extra kick never harmed anyone. Since the race above is extremely rare, we don't bother checking if the race happens but simply remove the check and the clearing of the armed flag from the work function. Reported-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-12KVM: eventfd: fix NULL deref irqbypass consumerWanpeng Li
Reported syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] PGD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1 Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm] task: ffff9bbe0dfbb900 task.stack: ffffb61802014000 RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] Call Trace: irqfd_shutdown+0x66/0xa0 [kvm] process_one_work+0x16b/0x480 worker_thread+0x4b/0x500 kthread+0x101/0x140 ? process_one_work+0x480/0x480 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x25/0x30 RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20 CR2: 0000000000000008 The syzkaller folks reported a NULL pointer dereference that due to unregister an consumer which fails registration before. The syzkaller creates two VMs w/ an equal eventfd occasionally. So the second VM fails to register an irqbypass consumer. It will make irqfd as inactive and queue an workqueue work to shutdown irqfd and unregister the irqbypass consumer when eventfd is closed. However, the second consumer has been initialized though it fails registration. So the token(same as the first VM's) is taken to unregister the consumer through the workqueue, the consumer of the first VM is found and unregistered, then NULL deref incurred in the path of deleting consumer from the consumers list. This patch fixes it by making irq_bypass_register/unregister_consumer() looks for the consumer entry based on consumer pointer itself instead of token matching. Reported-by: Dmitry Vyukov <dvyukov@google.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
2016-12-25Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14mm: unexport __get_user_pages_unlocked()Lorenzo Stoakes
Unexport the low-level __get_user_pages_unlocked() function and replaces invocations with calls to more appropriate higher-level functions. In hva_to_pfn_slow() we are able to replace __get_user_pages_unlocked() with get_user_pages_unlocked() since we can now pass gup_flags. In async_pf_execute() and process_vm_rw_single_vec() we need to pass different tsk, mm arguments so get_user_pages_remote() is the sane replacement in these cases (having added manual acquisition and release of mmap_sem.) Additionally get_user_pages_remote() reintroduces use of the FOLL_TOUCH flag. However, this flag was originally silently dropped by commit 1e9877902dc7 ("mm/gup: Introduce get_user_pages_remote()"), so this appears to have been unintentional and reintroducing it is therefore not an issue. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20161027095141.2569-3-lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release, the most interesting stuff is x86 nested virt improvements. x86: - userspace can now hide nested VMX features from guests - nested VMX can now run Hyper-V in a guest - support for AVX512_4VNNIW and AVX512_FMAPS in KVM - infrastructure support for virtual Intel GPUs. PPC: - support for KVM guests on POWER9 - improved support for interrupt polling - optimizations and cleanups. s390: - two small optimizations, more stuff is in flight and will be in 4.11. ARM: - support for the GICv3 ITS on 32bit platforms" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits) arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guest KVM: arm/arm64: timer: Check for properly initialized timer on init KVM: arm/arm64: vgic-v2: Limit ITARGETSR bits to number of VCPUs KVM: x86: Handle the kthread worker using the new API KVM: nVMX: invvpid handling improvements KVM: nVMX: check host CR3 on vmentry and vmexit KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry KVM: nVMX: propagate errors from prepare_vmcs02 KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT KVM: nVMX: load GUEST_EFER after GUEST_CR0 during emulated VM-entry KVM: nVMX: generate MSR_IA32_CR{0,4}_FIXED1 from guest CPUID KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation KVM: nVMX: support restore of VMX capability MSRs KVM: nVMX: generate non-true VMX MSRs based on true versions KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs. KVM: x86: Add kvm_skip_emulated_instruction and use it. KVM: VMX: Move skip_emulated_instruction out of nested_vmx_check_vmcs12 KVM: VMX: Reorder some skip_emulated_instruction calls KVM: x86: Add a return value to kvm_emulate_cpuid KVM: PPC: Book3S: Move prototypes for KVM functions into kvm_ppc.h ...
2016-12-13Merge tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO updates for v4.10 primarily include a new Mediated Device interface, which essentially allows software defined devices to be exposed to users through VFIO. The host vendor driver providing this virtual device polices, or mediates user access to the device. These devices often incorporate portions of real devices, for instance the primary initial users of this interface expose vGPUs which allow the user to map mediated devices, or mdevs, to a portion of a physical GPU. QEMU composes these mdevs into PCI representations using the existing VFIO user API. This enables both Intel KVM-GT support, which is also expected to arrive into Linux mainline during the v4.10 merge window, as well as NVIDIA vGPU, and also Channel I/O devices (aka CCW devices) for s390 virtualization support. (Kirti Wankhede, Neo Jia) - Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin) - Fixes to VFIO capability chain handling (Eric Auger) - Error handling fixes for fallout from mdev (Christophe JAILLET) - Notifiers to expose struct kvm to mdev vendor drivers (Jike Song) - type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia) * tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio iommu type1: Fix size argument to vfio_find_dma() in pin_pages/unpin_pages vfio iommu type1: Fix size argument to vfio_find_dma() during DMA UNMAP. vfio iommu type1: WARN_ON if notifier block is not unregistered kvm: set/clear kvm to/from vfio_group when group add/delete vfio: support notifier chain in vfio_group vfio: vfio_register_notifier: classify iommu notifier vfio: Fix handling of error returned by 'vfio_group_get_from_dev()' vfio: fix vfio_info_cap_add/shift vfio/pci: Drop unnecessary pcibios_err_to_errno() MAINTAINERS: Add entry VFIO based Mediated device drivers docs: Sample driver to demonstrate how to use Mediated device framework. docs: Sysfs ABI for mediated device framework docs: Add Documentation for Mediated devices vfio: Define device_api strings vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare() vfio_pci: Updated to use vfio_set_irqs_validate_and_prepare() vfio: Introduce vfio_set_irqs_validate_and_prepare() vfio_pci: Update vfio_pci to use vfio_info_add_capability() vfio: Introduce common function to add capabilities vfio iommu: Add blocking notifier to notify DMA_UNMAP ...
2016-12-12Merge tag 'kvm-arm-for-4.10' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM updates for 4.10: - Support for the GICv3 ITS on 32bit platforms - A handful of timer and GIC emulation fixes - A PMU architecture fix
2016-12-11Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-09KVM: arm/arm64: timer: Check for properly initialized timer on initChristoffer Dall
When the arch timer code fails to initialize (for example because the memory mapped timer doesn't work, which is currently seen with the AEM model), then KVM just continues happily with a final result that KVM eventually does a NULL pointer dereference of the uninitialized cycle counter. Check directly for this in the init path and give the user a reasonable error in this case. Cc: Shih-Wei Li <shihwei@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>