| Age | Commit message (Collapse) | Author |
|---|
|
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu changes from Ingo Molnar:
"There are two main areas of changes:
- Rework of the extended FPU state code to robustify the kernel's
usage of cpuid provided xstate sizes - and related changes (Dave
Hansen)"
- math emulation enhancements: new modern FPU instructions support,
with testcases, plus cleanups (Denys Vlasnko)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/fpu: Fixup uninitialized feature_name warning
x86/fpu/math-emu: Add support for FISTTP instructions
x86/fpu/math-emu, selftests: Add test for FISTTP instructions
x86/fpu/math-emu: Add support for FCMOVcc insns
x86/fpu/math-emu: Add support for F[U]COMI[P] insns
x86/fpu/math-emu: Remove define layer for undocumented opcodes
x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns
x86/fpu/math-emu: Remove !NO_UNDOC_CODE
x86/fpu: Check CPU-provided sizes against struct declarations
x86/fpu: Check to ensure increasing-offset xstate offsets
x86/fpu: Correct and check XSAVE xstate size calculations
x86/fpu: Add C structures for AVX-512 state components
x86/fpu: Rework YMM definition
x86/fpu/mpx: Rework MPX 'xstate' types
x86/fpu: Add xfeature_enabled() helper instead of test_bit()
x86/fpu: Remove 'xfeature_nr'
x86/fpu: Rework XSTATE_* macros to remove magic '2'
x86/fpu: Rename XFEATURES_NR_MAX
x86/fpu: Rename XSAVE macros
x86/fpu: Remove partial LWP support definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm changes from Ingo Molnar:
"The main change in this cycle is another step in the big x86 system
call interface rework by Andy Lutomirski, which moves most of the low
level x86 entry code from assembly to C, for all syscall entries
except native 64-bit system calls:
arch/x86/entry/entry_32.S | 182 ++++------
arch/x86/entry/entry_64_compat.S | 547 ++++++++-----------------------
194 insertions(+), 535 deletions(-)
... our hope is that the final remaining step (converting native
64-bit system calls) will be less painful as all the previous steps,
given that most of the legacies and quirks are concentrated around
native 32-bit and compat environments"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT
x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on
um/x86: Fix build after x86 syscall changes
x86/asm: Remove the xyz_cfi macros from dwarf2.h
selftests/x86: Style fixes for the 'unwind_vdso' test
x86/entry/64/compat: Document sysenter_fix_flags's reason for existence
x86/entry: Split and inline syscall_return_slowpath()
x86/entry: Split and inline prepare_exit_to_usermode()
x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing
x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY
x86/entry: Micro-optimize compat fast syscall arg fetch
x86/entry: Force inlining of 32-bit syscall code
x86/entry: Make irqs_disabled checks in exit code depend on lockdep
x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls
x86/asm: Remove thread_info.sysenter_return
x86/entry/32: Re-implement SYSENTER using the new C path
x86/entry/32: Switch INT80 to the new C syscall path
x86/entry/32: Open-code return tracking from fork and kthreads
x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls
x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improve accuracy of perf/sched clock on x86. (Adrian Hunter)
- Intel DS and BTS updates. (Alexander Shishkin)
- Intel cstate PMU support. (Kan Liang)
- Add group read support to perf_event_read(). (Peter Zijlstra)
- Branch call hardware sampling support, implemented on x86 and
PowerPC. (Stephane Eranian)
- Event groups transactional interface enhancements. (Sukadev
Bhattiprolu)
- Enable proper x86/intel/uncore PMU support on multi-segment PCI
systems. (Taku Izumi)
- ... misc fixes and cleanups.
The perf tooling team was very busy again with 200+ commits, the full
diff doesn't fit into lkml size limits. Here's an (incomplete) list
of the tooling highlights:
New features:
- Change the default event used in all tools (record/top): use the
most precise "cycles" hw counter available, i.e. when the user
doesn't specify any event, it will try using cycles:ppp, cycles:pp,
etc and fall back transparently until it finds a working counter.
(Arnaldo Carvalho de Melo)
- Integration of perf with eBPF that, given an eBPF .c source file
(or .o file built for the 'bpf' target with clang), will get it
automatically built, validated and loaded into the kernel via the
sys_bpf syscall, which can then be used and seen using 'perf trace'
and other tools.
(Wang Nan)
Various user interface improvements:
- Automatic pager invocation on long help output. (Namhyung Kim)
- Search for more options when passing args to -h, e.g.: (Arnaldo
Carvalho de Melo)
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
- Show ordered command line options when -h is used or when an
unknown option is specified. (Arnaldo Carvalho de Melo)
- If options are passed after -h, show just its descriptions, not all
options. (Arnaldo Carvalho de Melo)
- Implement column based horizontal scrolling in the hists browser
(top, report), making it possible to use the TUI for things like
'perf mem report' where there are many more columns than can fit in
a terminal. (Arnaldo Carvalho de Melo)
- Enhance the error reporting of tracepoint event parsing, e.g.:
$ oldperf record -e sched:sched_switc usleep 1
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Run 'perf list' for a list of valid events
Now we get the much nicer:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
And after we have those mount point permissions fixed:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
I.e. basically now the event parsing routing uses the strerror_open()
routines introduced by and used in 'perf trace' work. (Jiri Olsa)
- Fail properly when pattern matching fails to find a tracepoint,
i.e. '-e non:existent' was being correctly handled, with a proper
error message about that not being a valid event, but '-e
non:existent*' wasn't, fix it. (Jiri Olsa)
- Do event name substring search as last resort in 'perf list'.
(Arnaldo Carvalho de Melo)
E.g.:
# perf list clock
List of pre-defined events (to be used in -e):
cpu-clock [Software event]
task-clock [Software event]
uncore_cbox_0/clockticks/ [Kernel PMU event]
uncore_cbox_1/clockticks/ [Kernel PMU event]
kvm:kvm_pvclock_update [Tracepoint event]
kvm:kvm_update_master_clock [Tracepoint event]
power:clock_disable [Tracepoint event]
power:clock_enable [Tracepoint event]
power:clock_set_rate [Tracepoint event]
syscalls:sys_enter_clock_adjtime [Tracepoint event]
syscalls:sys_enter_clock_getres [Tracepoint event]
syscalls:sys_enter_clock_gettime [Tracepoint event]
syscalls:sys_enter_clock_nanosleep [Tracepoint event]
syscalls:sys_enter_clock_settime [Tracepoint event]
syscalls:sys_exit_clock_adjtime [Tracepoint event]
syscalls:sys_exit_clock_getres [Tracepoint event]
syscalls:sys_exit_clock_gettime [Tracepoint event]
syscalls:sys_exit_clock_nanosleep [Tracepoint event]
syscalls:sys_exit_clock_settime [Tracepoint event]
Intel PT hardware tracing enhancements:
- Accept a zero --itrace period, meaning "as often as possible". In
the case of Intel PT that is the same as a period of 1 and a unit
of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter)
- Harmonize itrace's synthesized callchains with the existing
--max-stack tool option. (Adrian Hunter)
- Allow time to be displayed in nanoseconds in 'perf script'.
(Adrian Hunter)
- Fix potential infinite loop when handling Intel PT timestamps.
(Adrian Hunter)
- Slighly improve Intel PT debug logging. (Adrian Hunter)
- Warn when AUX data has been lost, just like when processing
PERF_RECORD_LOST. (Adrian Hunter)
- Further document export-to-postgresql.py script. (Adrian Hunter)
- Add option to synthesize branch stack from auxtrace data. (Adrian
Hunter)
Misc notable changes:
- Switch the default callchain output mode to 'graph,0.5,caller', to
make it look like the default for other tools, reducing the
learning curve for people used to 'caller' based viewing. (Arnaldo
Carvalho de Melo)
- various call chain usability enhancements. (Namhyung Kim)
- Introduce the 'P' event modifier, meaning 'max precision level,
please', i.e.:
$ perf record -e cycles:P usleep 1
Is now similar to:
$ perf record usleep 1
Useful, for instance, when specifying multiple events. (Jiri Olsa)
- Add 'socket' sort entry, to sort by the processor socket in 'perf
top' and 'perf report'. (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by
processor socket. (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists
browser, used in 'perf top' and 'perf report'. (Kan Liang)
- Allow probing on kmodules without DWARF. (Masami Hiramatsu)
- Fix 'perf probe -l' for probes added to kernel module functions.
(Masami Hiramatsu)
- Preparatory work for the 'perf stat record' feature that will allow
generating perf.data files with counting data in addition to the
sampling mode we have now (Jiri Olsa)
- Update libtraceevent KVM plugin. (Paolo Bonzini)
- ... plus lots of other enhancements that I failed to list properly,
by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda,
Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He
Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan
Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim,
Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane
Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang
Nan, Yang Shi and Yunlong Song"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits)
perf unwind: Pass symbol source to libunwind
tools build: Fix libiberty feature detection
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event
perf record: Add clang options for compiling BPF scripts
perf bpf: Attach eBPF filter to perf event
perf tools: Make sure fixdep is built before libbpf
perf script: Enable printing of branch stack
perf trace: Add cmd string table to decode sys_bpf first arg
perf bpf: Collect perf_evsel in BPF object files
perf tools: Load eBPF object into kernel
perf tools: Create probe points for BPF programs
perf tools: Enable passing bpf object file to --event
perf ebpf: Add the libbpf glue
perf tools: Make perf depend on libbpf
perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore
perf tools: Enable pre-event inherit setting by config terms
perf symbols: we can now read separate debug-info files based on a build ID
perf symbols: Fix type error when reading a build-id
perf tools: Search for more options when passing args to -h
perf stat: Cache aggregated map entries in extra cpumap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
"The main changes in this cycle were:
- Improvements to expedited grace periods (Paul E McKenney)
- Performance improvements to and locktorture tests for percpu-rwsem
(Oleg Nesterov, Paul E McKenney)
- Torture-test changes (Paul E McKenney, Davidlohr Bueso)
- Documentation updates (Paul E McKenney)
- Miscellaneous fixes (Paul E McKenney, Boqun Feng, Oleg Nesterov,
Patrick Marlier)"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs()
rcu: Better hotplug handling for synchronize_sched_expedited()
rcu: Enable stall warnings for synchronize_rcu_expedited()
rcu: Add tasks to expedited stall-warning messages
rcu: Add online/offline info to expedited stall warning message
rcu: Consolidate expedited CPU selection
rcu: Prepare for consolidating expedited CPU selection
cpu: Remove try_get_online_cpus()
rcu: Stop excluding CPU hotplug in synchronize_sched_expedited()
rcu: Stop silencing lockdep false positive for expedited grace periods
rcu: Switch synchronize_sched_expedited() to IPI
locktorture: Fix module unwind when bad torture_type specified
torture: Forgive non-plural arguments
rcutorture: Fix unused-function warning for torturing_tasks()
rcutorture: Fix module unwind when bad torture_type specified
rcu_sync: Cleanup the CONFIG_PROVE_RCU checks
locking/percpu-rwsem: Clean up the lockdep annotations in percpu_down_read()
locking/percpu-rwsem: Fix the comments outdated by rcu_sync
locking/percpu-rwsem: Make use of the rcu_sync infrastructure
locking/percpu-rwsem: Make percpu_free_rwsem() after kzalloc() safe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timer departement provides:
- More y2038 work in the area of ntp and pps.
- Optimization of posix cpu timers
- New time related selftests
- Some new clocksource drivers
- The usual pile of fixes, cleanups and improvements"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
timeconst: Update path in comment
timers/x86/hpet: Type adjustments
clocksource/drivers/armada-370-xp: Implement ARM delay timer
clocksource/drivers/tango_xtal: Add new timer for Tango SoCs
clocksource/drivers/imx: Allow timer irq affinity change
clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr()
clocksource/drivers/h8300_*: Remove unneeded memset()s
clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
clocksource/drivers/em_sti: Remove unneeded memset()s
clocksource/drivers/mediatek: Use GPT as sched clock source
clockevents/drivers/mtk: Fix spurious interrupt leading to crash
posix_cpu_timer: Reduce unnecessary sighand lock contention
posix_cpu_timer: Convert cputimer->running to bool
posix_cpu_timer: Check thread timers only when there are active thread timers
posix_cpu_timer: Optimize fastpath_timer_check()
timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
timers: Use __fls in apply_slack()
clocksource: Remove return statement from void functions
net: sfc: avoid using timespec
ntp/pps: use y2038 safe types in pps_event_time
...
|
|
Mere possession of vm86 state is strange. Make sure that nothing
gets corrupted if we fork after calling vm86().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Stas Sergeev <stsp@list.ru>
Link: http://lkml.kernel.org/r/08f83295460a80e41dc5e3e81ec40d6844d316f5.1446270067.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Even if --symfs is used to point to the debug binaries, we send in the
non-debug filenames to libunwind, which leads to libunwind not finding
the debug frame. Fix this by preferring the file in --symfs, if it is
available.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Any CFLAGS or LDFLAGS set by the user need to be passed to the feature
build command. This many include for example -I or -L to point to
libraries and include files in custom paths.
In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD
macro which always sends in CFLAGS and LDFLAGS. The libiberty build line
however doesn't use the BUILD macro and thus needs to send in CFLAGS and
LDFLAGS explicitly. Without this, when using custom CFLAGS/LDFLAGS, libiberty
fails to be detected and the perf link fails with something like:
LINK perf
libbfd.a(bfd.o): In function `bfd_errmsg':
bfd.c:(.text+0x168): undefined reference to `xstrerror'
bbfd.a(opncls.o): In function `_bfd_new_bfd':
opncls.c:(.text+0xe8): undefined reference to `objalloc_create'
...
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch provides infrastructure for passing source files to --event
directly using:
# perf record --event bpf-file.c command
This patch does following works:
1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
expanded to allow caller tell it whether the passed file is source
file or object.
2) llvm__compile_bpf() is called to compile the '.c' file, the result
is saved into memory. Use bpf_object__open_buffer() to load the
in-memory object.
Introduces a bpf-script-example.c so we can manually test it:
# perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1
Note that '--clang-opt' must put before '--event'.
Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Although previous patch allows setting BPF compiler related options in
perfconfig, on some ad-hoc situation it still requires passing options
through cmdline. This patch introduces 2 options to 'perf record' for
this propose: --clang-path and --clang-opt.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-9-git-send-email-wangnan0@huawei.com
[ Add the new options to the 'record' man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:
# perf record --event ./hello_world.o ls
A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.
PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.
It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.
Committer note:
The bpf proggie used so far:
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 0;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
failed to produce any samples, even with forks happening and it being
running in system wide mode.
That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/
Change it to 'return 1;' instead and after that:
# trace --no-syscalls --event /tmp/foo.o
0.000 perf_bpf_probe:fork:(ffffffff8109be30))
2.333 perf_bpf_probe:fork:(ffffffff8109be30))
3.725 perf_bpf_probe:fork:(ffffffff8109be30))
4.550 perf_bpf_probe:fork:(ffffffff8109be30))
^C#
And it works with all tools, including 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While doing 'make -C tools/perf build-test':
LD fixdep-in.o
LINK fixdep
/bin/sh: /home/acme/git/linux/tools/build/fixdep: Permission denied
make[6]: *** [bpf.o] Error 1
make[5]: *** [libbpf-in.o] Error 2
make[4]: *** [/home/acme/git/linux/tools/lib/bpf/libbpf.a] Error 2
make[4]: *** Waiting for unfinished jobs....
The fixdep tool needs to be built as the first binary. Libraries are
built in paralel, so each of them needs to depend on fixdep target.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151028204450.GA25553@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch improves perf script by enabling printing of the
branch stack via the 'brstack' and 'brstacksym' arguments to
the field selection option -F. The option is off by default
and operates only if the perf.data file has branch stack content.
The branches are printed in to/from pairs. The most recent branch
is printed first. The number of branch entries vary based on the
underlying hardware and filtering used.
The brstack prints FROM/TO addresses in raw hexadecimal format.
The brstacksym prints FROM/TO addresses in symbolic form wherever
possible.
$ perf script -F ip,brstack
5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ...
$ perf script -F ip,brstacksym
4011e0 noploop+0x0/noploop+0x0/P/-/-/0
The notation F/T/M/X/A/C describes the attributes of the branch.
F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL)
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yuanfang Chen <cyfmxc@gmail.com>
Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
# perf trace -e bpf perf record -e /tmp/foo.o -a
362.779 (0.130 ms): perf/3451 bpf(cmd: PROG_LOAD, uattr: 0x7ffe9a6825d0, size: 48) = 3
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2b0nknu53baz9e0wj4thcdd8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'bpf-loader.[ch]' files are introduced in this patch. Which will be
the interface between perf and libbpf. bpf__prepare_load() resides in
bpf-loader.c. Following patches will enrich these two files.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By adding libbpf into perf's Makefile, this patch enables perf to build
libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set.
The newly introduced code is similar to how libapi and libtraceevent
are wired into Makefile.perf.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Append make_no_libbpf to tools/perf/tests/make.
The 'bpf' feature check is appended into default FEATURE_TESTS and
FEATURE_DISPLAY, so perf will check the API version of bpf in
/path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except
when we are trying to port this code to an old kernel.
Error messages are also updated to notify users about the lack of BPF
support in 'perf record' if libelf is missing or the BPF API check
failed.
tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf
files when working on perf using tools/perf/tags.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com
[ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we split symbols based on the map comparison, but symbols are stored
within dso objects and maps could point into same dso objects (kernel maps).
Hence we could end up changing rbtree we are currently iterating and mess it
up. It's easily reproduced on s390x by running:
$ perf record -a -- sleep 3
$ perf buildid-list -i perf.data --with-hits
The fix is to compare dso objects instead.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Recent GDB (at least on a vanilla Debian box) looks for debug information in
/usr/lib/debug/.build-id/nn/nnnnnnn
where nn/nnnnnn is the build-id of the stripped ELF binary. This is
documented here:
https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
This was not working in perf because we didn't read the build id until
AFTER we searched for the separate debug information file. This patch
reads the build ID and THEN does the search.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This was benign, but wrong. The build-id should live in a char[], not a char*[]
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Recently 'perf <tool> -h' was made aware of arguments and would show
just the help for the arguments specified, but that required a strict
form, i.e.:
$ perf -h --tui
worked, but:
$ perf -h tui
didn't.
Make it support both cases and also look at the option help when neither
matches, so that he following examples works:
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
$ perf report -h stack
Usage: perf report [<options>]
-g, --call-graph <print_type,threshold[,print_limit],order,
sort_key[,branch]>
Display call graph (stack chain/backtrace):
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: graph,0.5,caller,function
--max-stack <n> Set the maximum stack depth when parsing the
callchain, anything beyond the specified depth
will be ignored. Default: 127
$
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xzqvamzqv3cv0p6w3inhols3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently any time we need to access socket or core id for given cpu, we
access the sysfs topology file.
Adding a cpus_aggr_map cpu_map to cache those entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding cpu_map__empty_new interface to create empty cpumap with given
size. The cpumap entries are initialized with -1.
It'll be used for caching cpu_map in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Because the 'perf stat record' patches will use the id_offset member
together with the priv pointer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-29-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now usage_with_options() setup a pager before printing message so normal
printf() or pr_err() will not be shown. The usage_with_options_msg()
can be used to print some help message before usage strings.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's annoying to see error or help message when command has many options
like in perf record, report or top. So setup pager when print parser
error or help message - it should be OK since no UI is enabled at the
parsing time. The usage_with_options() already disables it by calling
exit_browser() anyway.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that it can be more consistent with other --show-* options. The old
name (--showcpuutilization) is provided only for compatibility.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently if an option name is ambiguous it only prints first two
matched option names but no help. It'd be better it could show all
possible names and help messages too.
Before:
$ perf report --show
Error: Ambiguous option: show (could be --show-total-period or
--show-ref-call-graph)
Usage: perf report [<options>]
After:
$ perf report --show
Error: Ambiguous option: show (could be --show-total-period or
--show-ref-call-graph)
Usage: perf report [<options>]
-n, --show-nr-samples
Show a column with the number of samples
--showcpuutilization
Show sample percentage for different cpu modes
-I, --show-info Display extended information about perf.data file
--show-total-period
Show a column with the sum of periods
--show-ref-call-graph
Show callgraph from reference event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some tools have a lot of options, so, providing a way to show help just
for some of them may come handy:
$ perf report -h --tui
Usage: perf report [<options>]
--tui Use the TUI interface
$ perf report -h --tui --showcpuutilization -b -c
Usage: perf report [<options>]
-b, --branch-stack use branch records for per branch histogram filling
-c, --comms <comm[,comm...]>
only consider symbols in these comms
--showcpuutilization
Show sample percentage for different cpu modes
--tui Use the TUI interface
$
Using it with perf bash completion is also handy, just make sure you
source the needed file:
$ . ~/git/linux/tools/perf/perf-completion.sh
Then press tab/tab after -- to see a list of options, put them after -h
and only the options chosen will have its help presented:
$ perf report -h --
--asm-raw --demangle-kernel --group
--kallsyms --pretty --stdio
--branch-history --disassembler-style --gtk
--max-stack --showcpuutilization --symbol-filter
--branch-stack --dsos --header
--mem-mode --show-info --symbols
--call-graph --dump-raw-trace --header-only
--modules --show-nr-samples --symfs
--children --exclude-other --hide-unresolved
--objdump --show-ref-call-graph --threads
--column-widths --fields --ignore-callees
--parent --show-total-period --tid
--comms --field-separator --input
--percentage --socket-filter --tui
--cpu --force --inverted
--percent-limit --sort --verbose
--demangle --full-source-path --itrace
--pid --source --vmlinux
$ perf report -h --socket-filter
Usage: perf report [<options>]
--socket-filter <n>
only show processor socket that match with this filter
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-83mcdd3wj0379jcgea8w0fxa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When asking for a listing of the options, be it using -h or when an
unknown option is passed, order it by one-letter options, then the ones
having just long names.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-41qh68t35n4ehrpsuazp1dx8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf_config() infrastructure we inherited from git calls die() when
the provided config callback returns -1, meaning some key in a config
section is unexpected, that seems ok for a stdio based tool, but in
--tui we end up messing up the output, so just tell the user about the
error, wait for a keystroke and return 0, being more resilient and
proceeding with what we managed to parse.
That die() needs to die, tho :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pqtsffh2kwr5mwm4qg9kgotu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I.e. we want to tell the user about errors found during, for instance,
the ui_browser initialization, so that a call to ui__warning() appears
as a window waiting for a key to be pressed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The annotate__configs should be sorted so that it can use bsearch(3).
However commit 0c4a5bcea460 ("perf annotate: Display total number of
samples with --show-total-period") added a new config item at the end.
This resulted in the 'annotate.use_offset' config variable cannot be
found and perf terminated like below:
$ perf report
bad config file line 6 in ~/.perfconfig
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0c4a5bcea460 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1445396240-3428-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The caller callchain order is useful with --children option since it can
show 'overview' style output, but other commands which don't use
--children feature like 'perf script' or even 'perf report/top' without
--children are better to keep callee order.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445499946-29817-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently 'perf top --call-graph' option is same as 'perf record'. But
'perf top' also need to receive display options in 'perf report'. To do
that, change parse_callchain_report_opt() to allow record options too.
Now perf top can receive display options like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph
<mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]>
setup and enables call-graph (stack chain/backtrace)
recording: fp dwarf lbr, output_type (graph, flat,
fractal, or none), min percent threshold, optional
print limit, callchain order, key (function or
address), add branches
$ perf top --call-graph callee,graph,fp
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These messages will be used by 'perf top' in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commits such as 65dd297ac25565 ("xfs: %pF is only for function
pointers") caused a regression because pretty_print() didn't support
%ps/%pS. The current %pf/%pF implementation in pretty_print() is what
%ps/%pS is supposed to do, so use the same code for %ps/%pS.
Addressing the incorrect %pf/%pF implementation is beyond the scope of
this patch.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20150831211637.GA12848@home.buserror.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q0lde9ajs84oi38nlyjcqbwg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a missing field to the perf_event_attr debug output.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1445366797-30894-4-git-send-email-andi@firstfloor.org
[ Print it between config2 and sample_regs_user (peterz)]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf will core dump if --per-socket/core -a are applied for perf stat.
The root cause is that cpu_map__build_map set refcnt of evlist's cpu_map
to 1. It should set refcnt for the newly created cpu_map, not evlist's
cpu_map.
Here is the example:
# perf stat -e cycles --per-socket -a sleep 1
Performance counter stats for 'system wide':
S0 36 30,196,257 cycles
S1 28 15,823,536 cycles
1.001126828 seconds time elapsed
*** Error in `./perf': corrupted double-linked list: 0x00000000021f9090 ***
======= Backtrace: =========
/lib64/libc.so.6[0x3002e7bbe7]
/lib64/libc.so.6[0x3002e7d2b5]
./perf(perf_evsel__delete+0x28)[0x485bdd]
./perf[0x4800e8]
./perf(perf_evlist__delete+0x5e)[0x482cd5]
./perf(cmd_stat+0xf25)[0x432328]
./perf[0x4768e0]
./perf[0x476ad6]
./perf[0x476b41]
./perf(main+0x1d0)[0x476db2]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3002e21b45]
./perf[0x4202c5]
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1444388363-35936-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The format of the role word has changed through the years and the plugin
was never updated; some VMX exit reasons were missing too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1443695293-31127-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 7c422f5572667fef0db38d2046ecce69dcf0afc8 ("tools build: Build
fixdep helper from perf and basic libs") dynamically creates fixdep
during the perf building. Add it to .gitignore.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7c422f557266 ("tools build: Build fixdep helper from perf and basic libs")
Link: http://lkml.kernel.org/r/1444899116-8220-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add a new branch type sampling filter to perf record.
It is named 'call' and maps to PERF_SAMPLE_BRANCH_CALL. It samples
direct call branches only, unlike 'any_call' which includes indirect
calls as well.
$ perf record -j call -e cycles .....
The man page is updated accordingly.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: khandual@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1444720151-10275-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
