| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace update from Eric Biederman:
"There are several pieces of active development, but only a single
change made it through the gauntlet to be ready for v5.12. That change
is tightening up the semantics of the v3 capabilities xattr. It is
just short of being a bug-fix/security issue as no user space is known
to even generate the problem case"
* 'userns-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
capabilities: Don't allow writing ambiguous v3 file capabilities
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull RCU-safe common_lsm_audit() from Al Viro:
"Make common_lsm_audit() non-blocking and usable from RCU pathwalk
context.
We don't really need to grab/drop dentry in there - rcu_read_lock() is
enough. There's a couple of followups using that to simplify the
logics in selinux, but those hadn't soaked in -next yet, so they'll
have to go in next window"
* 'work.audit' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make dump_common_audit_data() safe to be called from RCU pathwalk
new helper: d_find_alias_rcu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"New features:
- Cr50 I2C TPM driver
- sysfs exports of PCR registers in TPM 2.0 chips
Bug fixes:
- bug fixes for tpm_tis driver, which had a racy wait for hardware
state change to be ready to send a command to the TPM chip. The bug
has existed already since 2006, but has only made itself known in
recent past. This is the same as the "last time" :-)
- Otherwise there's bunch of fixes for not as alarming regressions. I
think the list is about the same as last time, except I added fixes
for some disjoint bugs in trusted keys that I found some time ago"
* tag 'tpmdd-next-v5.12-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Reserve TPM for seal and unseal operations
KEYS: trusted: Fix migratable=1 failing
KEYS: trusted: Fix incorrect handling of tpm_get_random()
tpm/ppi: Constify static struct attribute_group
ABI: add sysfs description for tpm exports of PCR registers
tpm: add sysfs exports for all banks of PCR registers
keys: Update comment for restrict_link_by_key_or_keyring_chain
tpm: Remove tpm_dev_wq_lock
char: tpm: add i2c driver for cr50
tpm: Fix fall-through warnings for Clang
tpm_tis: Clean up locality release
tpm_tis: Fix check_locality for correct locality acquisition
|
|
Pull smack updates from Casey Schaufler:
"Bounds checking for writes to smackfs interfaces"
* tag 'Smack-for-v5.12' of git://github.com/cschaufler/smack-next:
smackfs: restrict bytes count in smackfs write functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for measuring kernel critical data, as per usual
based on policy. The first example measures the in memory SELinux
policy. The second example measures the kernel version.
In addition are four bug fixes to address memory leaks and a missing
'static' function declaration"
* tag 'integrity-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Make function integrity_add_key() static
ima: Free IMA measurement buffer after kexec syscall
ima: Free IMA measurement buffer on error
IMA: Measure kernel version in early boot
selinux: include a consumer of the new IMA critical data hook
IMA: define a builtin critical data measurement policy
IMA: extend critical data hook to limit the measurement based on a label
IMA: limit critical data measurement based on a label
IMA: add policy rule to measure critical data
IMA: define a hook to measure kernel integrity critical data
IMA: add support to measure buffer data hash
IMA: generalize keyring specific measurement constructs
evm: Fix memleak in init_desc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a good handful of patches for SELinux this time around; with
everything passing the selinux-testsuite and applying cleanly to your
tree as of a few minutes ago. The highlights are:
- Add support for labeling anonymous inodes, and extend this new
support to userfaultfd.
- Fallback to SELinux genfs file labeling if the filesystem does not
have xattr support. This is useful for virtiofs which can vary in
its xattr support depending on the backing filesystem.
- Classify and handle MPTCP the same as TCP in SELinux.
- Ensure consistent behavior between inode_getxattr and
inode_listsecurity when the SELinux policy is not loaded. This
fixes a known problem with overlayfs.
- A couple of patches to prune some unused variables from the SELinux
code, mark private variables as static, and mark other variables as
__ro_after_init or __read_mostly"
* tag 'selinux-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
fs: anon_inodes: rephrase to appropriate kernel-doc
userfaultfd: use secure anon inodes for userfaultfd
selinux: teach SELinux about anonymous inodes
fs: add LSM-supporting anon-inode interface
security: add inode_init_security_anon() LSM hook
selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support
selinux: mark selinux_xfrm_refcount as __read_mostly
selinux: mark some global variables __ro_after_init
selinux: make selinuxfs_mount static
selinux: drop the unnecessary aurule_callback variable
selinux: remove unused global variables
selinux: fix inconsistency between inode_getxattr and inode_listsecurity
selinux: handle MPTCP consistently with TCP
|
|
Pull tomoyo updates from Tetsuo Handa:
"Detect kernel thread correctly, and ignore harmless data race"
* tag 'tomoyo-pr-20210215' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: recognize kernel threads correctly
tomoyo: ignore data race while checking quota
|
|
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.
Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.
Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Consider the following transcript:
$ keyctl add trusted kmk "new 32 blobauth=helloworld keyhandle=80000000 migratable=1" @u
add_key: Invalid argument
The documentation has the following description:
migratable= 0|1 indicating permission to reseal to new PCR values,
default 1 (resealing allowed)
The consequence is that "migratable=1" should succeed. Fix this by
allowing this condition to pass instead of return -EINVAL.
[*] Documentation/security/keys/trusted-encrypted.rst
Cc: stable@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Fixes: d00a1c72f7f4 ("keys: add new trusted key-type")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
When tpm_get_random() was introduced, it defined the following API for the
return value:
1. A positive value tells how many bytes of random data was generated.
2. A negative value on error.
However, in the call sites the API was used incorrectly, i.e. as it would
only return negative values and otherwise zero. Returning he positive read
counts to the user space does not make any possible sense.
Fix this by returning -EIO when tpm_get_random() returns a positive value.
Fixes: 41ab999c80f1 ("tpm: Move tpm_get_random api into the TPM device driver")
Cc: stable@vger.kernel.org
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The sparse tool complains as follows:
security/integrity/digsig.c:146:12: warning:
symbol 'integrity_add_key' was not declared. Should it be static?
This function is not used outside of digsig.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 60740accf784 ("integrity: Load certs to the platform keyring")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
|
|
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. In error code paths this memory
is not freed resulting in memory leak.
Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
syzbot found WARNINGs in several smackfs write operations where
bytes count is passed to memdup_user_nul which exceeds
GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE.
Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO,
smk_write_net6addr accepts any label or -DELETE. I couldn't find
any general rule for other label lengths except SMK_LABELLEN,
SMK_LONGLABEL, SMK_CIPSOMAX which are documented.
Let's constrain, in general, smackfs label lengths for PAGE_SIZE.
Although fuzzer crashes write to smackfs/netlabel on 0x400000 length.
Here is a quick way to reproduce the WARNING:
python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel
Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
Commit db68ce10c4f0a27c ("new helper: uaccess_kernel()") replaced
segment_eq(get_fs(), KERNEL_DS) with uaccess_kernel(). But the correct
method for tomoyo to check whether current is a kernel thread in order
to assume that kernel threads are privileged for socket operations was
(current->flags & PF_KTHREAD). Now that uaccess_kernel() became 0 on x86,
tomoyo has to fix this problem. Do like commit 942cb357ae7d9249 ("Smack:
Handle io_uring kernel thread privileges") does.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
syzbot is reporting that tomoyo's quota check is racy [1]. But this check
is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore
this data race.
[1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e50476
Reported-by: syzbot <syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
If a capability is stored on disk in v2 format cap_inode_getsecurity() will
currently return in v2 format unconditionally.
This is wrong: v2 cap should be equivalent to a v3 cap with zero rootid,
and so the same conversions performed on it.
If the rootid cannot be mapped, v3 is returned unconverted. Fix this so
that both v2 and v3 return -EOVERFLOW if the rootid (or the owner of the fs
user namespace in case of v2) cannot be mapped into the current user
namespace.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The integrity of a kernel can be verified by the boot loader on cold
boot, and during kexec, by the current running kernel, before it is
loaded. However, it is still possible that the new kernel being
loaded is older than the current kernel, and/or has known
vulnerabilities. Therefore, it is imperative that an attestation
service be able to verify the version of the kernel being loaded on
the client, from cold boot and subsequent kexec system calls,
ensuring that only kernels with versions known to be good are loaded.
Measure the kernel version using ima_measure_critical_data() early on
in the boot sequence, reducing the chances of known kernel
vulnerabilities being exploited. With IMA being part of the kernel,
this overall approach makes the measurement itself more trustworthy.
To enable measuring the kernel version "ima_policy=critical_data"
needs to be added to the kernel command line arguments.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset ima_policy=critical_data
If runtime measurement of the kernel version is ever needed, the
following should be added to /etc/ima/ima-policy:
measure func=CRITICAL_DATA label=kernel_info
To extract the measured data after boot, the following command can be used:
grep -m 1 "kernel_version" \
/sys/kernel/security/integrity/ima/ascii_runtime_measurements
Sample output from the command above:
10 a8297d408e9d5155728b619761d0dd4cedf5ef5f ima-buf
sha256:5660e19945be0119bc19cbbf8d9c33a09935ab5d30dad48aa11f879c67d70988
kernel_version 352e31312e302d7263332d31363138372d676564623634666537383234342d6469727479
The above hex-ascii string corresponds to the kernel version
(e.g. xxd -r -p):
5.11.0-rc3-16187-gedb64fe78244-dirty
Signed-off-by: Raphael Gianotti <raphgi@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us. And it's possible for
old long name to be freed after rename, leading to UAF here.
Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
SELinux stores the active policy in memory, so the changes to this data
at runtime would have an impact on the security guarantees provided
by SELinux. Measuring in-memory SELinux policy through IMA subsystem
provides a secure way for the attestation service to remotely validate
the policy contents at runtime.
Measure the hash of the loaded policy by calling the IMA hook
ima_measure_critical_data(). Since the size of the loaded policy
can be large (several MB), measure the hash of the policy instead of
the entire policy to avoid bloating the IMA log entry.
To enable SELinux data measurement, the following steps are required:
1, Add "ima_policy=critical_data" to the kernel command line arguments
to enable measuring SELinux data at boot time.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data
2, Add the following rule to /etc/ima/ima-policy
measure func=CRITICAL_DATA label=selinux
Sample measurement of the hash of SELinux policy:
To verify the measured data with the current SELinux policy run
the following commands and verify the output hash values match.
sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1
grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6
Note that the actual verification of SELinux policy would require loading
the expected policy into an identical kernel on a pristine/known-safe
system and run the sha256sum /sys/kernel/selinux/policy there to get
the expected hash.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Define a new critical data builtin policy to allow measuring
early kernel integrity critical data before a custom IMA policy
is loaded.
Update the documentation on kernel parameters to document
the new critical data builtin policy.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The IMA hook ima_measure_critical_data() does not support a way to
specify the source of the critical data provider. Thus, the data
measurement cannot be constrained based on the data source label
in the IMA policy.
Extend the IMA hook ima_measure_critical_data() to support passing
the data source label as an input parameter, so that the policy rule can
be used to limit the measurements based on the label.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Integrity critical data may belong to a single subsystem or it may
arise from cross subsystem interaction. Currently there is no mechanism
to group or limit the data based on certain label. Limiting and
grouping critical data based on a label would make it flexible and
configurable to measure.
Define "label:=", a new IMA policy condition, for the IMA func
CRITICAL_DATA to allow grouping and limiting measurement of integrity
critical data.
Limit the measurement to the labels that are specified in the IMA
policy - CRITICAL_DATA+"label:=". If "label:=" is not provided with
the func CRITICAL_DATA, measure all the input integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
A new IMA policy rule is needed for the IMA hook
ima_measure_critical_data() and the corresponding func CRITICAL_DATA for
measuring the input buffer. The policy rule should ensure the buffer
would get measured only when the policy rule allows the action. The
policy rule should also support the necessary constraints (flags etc.)
for integrity critical buffer data measurements.
Add policy rule support for measuring integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
IMA provides capabilities to measure file and buffer data. However,
various data structures, policies, and states stored in kernel memory
also impact the integrity of the system. Several kernel subsystems
contain such integrity critical data. These kernel subsystems help
protect the integrity of the system. Currently, IMA does not provide a
generic function for measuring kernel integrity critical data.
Define ima_measure_critical_data, a new IMA hook, to measure kernel
integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The original IMA buffer data measurement sizes were small (e.g. boot
command line), but the new buffer data measurement use cases have data
sizes that are a lot larger. Just as IMA measures the file data hash,
not the file data, IMA should similarly support the option for measuring
buffer data hash.
Introduce a boolean parameter to support measuring buffer data hash,
which would be much smaller, instead of the buffer itself.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
IMA functions such as ima_match_keyring(), process_buffer_measurement(),
ima_match_policy() etc. handle data specific to keyrings. Currently,
these constructs are not generic to handle any func specific data.
This makes it harder to extend them without code duplication.
Refactor the keyring specific measurement constructs to be generic and
reusable in other measurement scenarios.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
This change uses the anon_inodes and LSM infrastructure introduced in
the previous patches to give SELinux the ability to control
anonymous-inode files that are created using the new
anon_inode_getfd_secure() function.
A SELinux policy author detects and controls these anonymous inodes by
adding a name-based type_transition rule that assigns a new security
type to anonymous-inode files created in some domain. The name used
for the name-based transition is the name associated with the
anonymous inode for file listings --- e.g., "[userfaultfd]" or
"[perf_event]".
Example:
type uffd_t;
type_transition sysadm_t sysadm_t : anon_inode uffd_t "[userfaultfd]";
allow sysadm_t uffd_t:anon_inode { create };
(The next patch in this series is necessary for making userfaultfd
support this new interface. The example above is just
for exposition.)
Signed-off-by: Daniel Colascione <dancol@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This change adds a new LSM hook, inode_init_security_anon(), that will
be used while creating secure anonymous inodes. The hook allows/denies
its creation and assigns a security context to the inode.
The new hook accepts an optional context_inode parameter that callers
can use to provide additional contextual information to security modules
for granting/denying permission to create an anon-inode of the same type.
This context_inode's security_context can also be used to initialize the
newly created anon-inode's security_context.
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When a superblock is assigned the SECURITY_FS_USE_XATTR behavior by the
policy yet it lacks xattr support, try to fall back to genfs rather than
rejecting the mount. If a genfscon rule is found for the filesystem,
then change the behavior to SECURITY_FS_USE_GENFS, otherwise reject the
mount as before. A similar fallback is already done in security_fs_use()
if no behavior specification is found for the given filesystem.
This is needed e.g. for virtiofs, which may or may not support xattrs
depending on the backing host filesystem.
Example:
# seinfo --genfs | grep ' ramfs'
genfscon ramfs / system_u:object_r:ramfs_t:s0
# echo '(fsuse xattr ramfs (system_u object_r fs_t ((s0) (s0))))' >ramfs_xattr.cil
# semodule -i ramfs_xattr.cil
# mount -t ramfs none /mnt
Before:
mount: /mnt: mount(2) system call failed: Operation not supported.
After:
(mount succeeds)
# ls -Zd /mnt
system_u:object_r:ramfs_t:s0 /mnt
See also:
https://lore.kernel.org/selinux/20210105142148.GA3200@redhat.com/T/
https://github.com/fedora-selinux/selinux-policy/pull/478
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
tmp_tfm is allocated, but not freed on subsequent kmalloc failure, which
leads to a memory leak. Free tmp_tfm.
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[zohar@linux.ibm.com: formatted/reworded patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
This is motivated by a perfomance regression of selinux_xfrm_enabled()
that happened on a RHEL kernel due to false sharing between
selinux_xfrm_refcount and (the late) selinux_ss.policy_rwlock (i.e. the
.bss section memory layout changed such that they happened to share the
same cacheline). Since the policy rwlock's memory region was modified
upon each read-side critical section, the readers of
selinux_xfrm_refcount had frequent cache misses, eventually leading to a
significant performance degradation under a TCP SYN flood on a system
with many cores (32 in this case, but it's detectable on less cores as
well).
While upstream has since switched to RCU locking, so the same can no
longer happen here, selinux_xfrm_refcount could still share a cacheline
with another frequently written region, thus marking it __read_mostly
still makes sense. __read_mostly helps, because it will put the symbol
in a separate section along with other read-mostly variables, so there
should never be a clash with frequently written data.
Since selinux_xfrm_refcount is modified only in case of an explicit
action, it should be safe to do this (i.e. it shouldn't disrupt other
read-mostly variables too much).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
All of these are never modified outside initcalls, so they can be
__ro_after_init.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
It is not referenced outside selinuxfs.c, so remove its extern header
declaration and make it static.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Its value is actually not changed anywhere, so it can be substituted for
a direct call to audit_update_lsm_rules().
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
All of sel_ib_pkey_list, sel_netif_list, sel_netnode_list, and
sel_netport_list are declared but never used. Remove them.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.
When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr. This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.
This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().
Match the logic of inode_listsecurity to that of inode_getxattr and
do not list the security.selinux xattr if selinux is not initialized.
Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Fixes: c8e222616c7e ("selinux: allow reading labels before policy is loaded")
Cc: stable@vger.kernel.org#v5.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The MPTCP protocol uses a specific protocol value, even if
it's an extension to TCP. Additionally, MPTCP sockets
could 'fall-back' to TCP at run-time, depending on peer MPTCP
support and available resources.
As a consequence of the specific protocol number, selinux
applies the raw_socket class to MPTCP sockets.
Existing TCP application converted to MPTCP - or forced to
use MPTCP socket with user-space hacks - will need an
updated policy to run successfully.
This change lets selinux attach the TCP socket class to
MPTCP sockets, too, so that no policy changes are needed in
the above scenario.
Note that the MPTCP is setting, propagating and updating the
security context on all the subflows and related request
socket.
Link: https://lore.kernel.org/linux-security-module/CAHC9VhTaK3xx0hEGByD2zxfF7fadyPP1kb-WeWH_YCyq9X-sRg@mail.gmail.com/T/#t
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[PM: tweaked subject's prefix]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The v3 file capabilities have a uid field that records the filesystem
uid of the root user of the user namespace the file capabilities are
valid in.
When someone is silly enough to have the same underlying uid as the
root uid of multiple nested containers a v3 filesystem capability can
be ambiguous.
In the spirit of don't do that then, forbid writing a v3 filesystem
capability if it is ambiguous.
Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"Provide a fix for the incorrect handling of privilege in the face of
io_uring's use of kernel threads. That invalidated an long standing
assumption regarding the privilege of kernel threads.
The fix is simple and safe. It was provided by Jens Axboe and has been
tested"
* tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next:
Smack: Handle io_uring kernel thread privileges
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
Smack assumes that kernel threads are privileged for smackfs
operations. This was necessary because the credential of the
kernel thread was not related to a user operation. With io_uring
the credential does reflect a user's rights and can be used.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Allow unprivileged mounting in a user namespace.
For quite some time the security model of overlayfs has been that
operations on underlying layers shall be performed with the
privileges of the mounting task.
This way an unprvileged user cannot gain privileges by the act of
mounting an overlayfs instance. A full audit of all function calls
made by the overlayfs code has been performed to see whether they
conform to this model, and this branch contains some fixes in this
regard.
- Support running on copied filesystem images by optionally disabling
UUID verification.
- Bug fixes as well as documentation updates.
* tag 'ovl-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: unprivieged mounts
ovl: do not get metacopy for userxattr
ovl: do not fail because of O_NOATIME
ovl: do not fail when setting origin xattr
ovl: user xattr
ovl: simplify file splice
ovl: make ioctl() safe
ovl: check privs before decoding file handle
vfs: verify source area in vfs_dedupe_file_range_one()
vfs: move cap_convert_nscap() call into vfs_setxattr()
ovl: fix incorrect extent info in metacopy case
ovl: expand warning in ovl_d_real()
ovl: document lower modification caveats
ovl: warn about orphan metacopy
ovl: doc clarification
ovl: introduce new "uuid=off" option for inodes index feature
ovl: propagate ovl_fs to ovl_decode_real_fh and ovl_encode_real_fh
|
|
Pull smack updates from Casey Schaufler:
"There are no functional changes. Just one minor code clean-up and a
set of corrections in function header comments"
* tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-next:
security/smack: remove unused varible 'rc'
Smack: fix kernel-doc interface on functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Just three patches here. Other integrity changes are being upstreamed
via EFI (defines a common EFI secure and trusted boot IMA policy) and
BPF LSM (exporting the IMA file cache hash info based on inode).
The three patches included here:
- bug fix: fail calculating the file hash, when a file not opened for
read and the attempt to re-open it for read fails.
- defer processing the "ima_appraise" boot command line option to
avoid enabling different modes (e.g. fix, log) to when the secure
boot flag is available on arm.
- defines "ima-buf" as the default IMA buffer measurement template in
preparation for the builtin integrity "critical data" policy"
* tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Don't modify file descriptor mode on the fly
ima: select ima-buf template for buffer measurement
ima: defer arch_ima_get_secureboot() call to IMA init time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A small set of audit patches for v5.11 with four patches in total and
only one of any real significance.
Richard's patch to trigger accompanying records causes the kernel to
emit additional related records when an audit event occurs; helping
provide some much needed context to events in the audit log. It is
also worth mentioning that this is a revised patch based on an earlier
attempt that had to be reverted in the v5.8 time frame.
Everything passes our test suite, and with no problems reported please
merge this for v5.11"
* tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: replace atomic_add_return()
audit: fix macros warnings
audit: trigger accompanying records when no rules present
audit: fix a kernel-doc markup
|
|
Strangely I hadn't had noticed the existence of the list_entry_is_head()
in apparmor code when added the same one in the list.h. Luckily it's
fully identical and didn't break builds. In any case we don't need a
duplicate anymore, thus remove it from apparmor code.
Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com
Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn " <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
