aboutsummaryrefslogtreecommitdiff
path: root/security/integrity/ima/ima_crypto.c
AgeCommit message (Collapse)Author
2020-06-24ima: extend boot_aggregate with kernel measurementsMaurizio Drocco
Registers 8-9 are used to store measurements of the kernel and its command line (e.g., grub2 bootloader with tpm module enabled). IMA should include them in the boot aggregate. Registers 8-9 should be only included in non-SHA1 digests to avoid ambiguity. Signed-off-by: Maurizio Drocco <maurizio.drocco@ibm.com> Reviewed-by: Bruno Meneguele <bmeneg@redhat.com> Tested-by: Bruno Meneguele <bmeneg@redhat.com> (TPM 1.2, TPM 2.0) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-06-07ima: Remove __init annotation from ima_pcrread()Roberto Sassu
Commit 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that the digest can be recalculated for the boot_aggregate measurement entry if the 'd' template field has been requested. For the 'd' field, only SHA1 and MD5 digests are accepted. Given that ima_eventdigest_init() does not have the __init annotation, all functions called should not have it. This patch removes __init from ima_pcrread(). Cc: stable@vger.kernel.org Fixes: 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-06Merge tag 'integrity-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The main changes are extending the TPM 2.0 PCR banks with bank specific file hashes, calculating the "boot_aggregate" based on other TPM PCR banks, using the default IMA hash algorithm, instead of SHA1, as the basis for the cache hash table key, and preventing the mprotect syscall to circumvent an IMA mmap appraise policy rule. - In preparation for extending TPM 2.0 PCR banks with bank specific digests, commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modified tpm_pcr_extend(). The original SHA1 file digests were padded/truncated, before being extended into the other TPM PCR banks. This pull request calculates and extends the TPM PCR banks with bank specific file hashes completing the above change. - The "boot_aggregate", the first IMA measurement list record, is the "trusted boot" link between the pre-boot environment and the running OS. With TPM 2.0, the "boot_aggregate" record is not limited to being based on the SHA1 TPM PCR bank, but can be calculated based on any enabled bank, assuming the hash algorithm is also enabled in the kernel. Other changes include the following and five other bug fixes/code clean up: - supporting both a SHA1 and a larger "boot_aggregate" digest in a custom template format containing both the the SHA1 ('d') and larger digests ('d-ng') fields. - Initial hash table key fix, but additional changes would be good" * tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Directly free *entry in ima_alloc_init_template() if digests is NULL ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init() ima: Directly assign the ima_default_policy pointer to ima_rules ima: verify mprotect change is consistent with mmap policy evm: Fix possible memory leak in evm_calc_hmac_or_hash() ima: Set again build_ima_appraise variable ima: Remove redundant policy rule set in add_rules() ima: Fix ima digest hash table key calculation ima: Use ima_hash_algo for collision detection in the measurement list ima: Calculate and extend PCR with digests in ima_template_entry ima: Allocate and initialize tfm for each PCR bank ima: Switch to dynamically allocated buffer for template digests ima: Store template digest directly in ima_template_entry ima: Evaluate error in init_ima() ima: Switch to ima_hash_algo for boot aggregate
2020-06-03ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()Roberto Sassu
If the template field 'd' is chosen and the digest to be added to the measurement entry was not calculated with SHA1 or MD5, it is recalculated with SHA1, by using the passed file descriptor. However, this cannot be done for boot_aggregate, because there is no file descriptor. This patch adds a call to ima_calc_boot_aggregate() in ima_eventdigest_init(), so that the digest can be recalculated also for the boot_aggregate entry. Cc: stable@vger.kernel.org # 3.13.x Fixes: 3ce1217d6cd5d ("ima: define template fields library and new helpers") Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-05-07ima: Set file->f_mode instead of file->f_flags in ima_calc_file_hash()Roberto Sassu
Commit a408e4a86b36 ("ima: open a new file instance if no read permissions") tries to create a new file descriptor to calculate a file digest if the file has not been opened with O_RDONLY flag. However, if a new file descriptor cannot be obtained, it sets the FMODE_READ flag to file->f_flags instead of file->f_mode. This patch fixes this issue by replacing f_flags with f_mode as it was before that commit. Cc: stable@vger.kernel.org # 4.20.x Fixes: a408e4a86b36 ("ima: open a new file instance if no read permissions") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-04-19ima: Use ima_hash_algo for collision detection in the measurement listRoberto Sassu
Before calculating a digest for each PCR bank, collisions were detected with a SHA1 digest. This patch includes ima_hash_algo among the algorithms used to calculate the template digest and checks collisions on that digest. The position in the measurement entry array of the template digest calculated with the IMA default hash algorithm is stored in the ima_hash_algo_idx global variable and is determined at IMA initialization time. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-04-19ima: Calculate and extend PCR with digests in ima_template_entryRoberto Sassu
This patch modifies ima_calc_field_array_hash() to calculate a template digest for each allocated PCR bank and SHA1. It also passes the tpm_digest array of the template entry to ima_pcr_extend() or in case of a violation, the pre-initialized digests array filled with 0xff. Padding with zeros is still done if the mapping between TPM algorithm ID and crypto ID is unknown. This patch calculates again the template digest when a measurement list is restored. Copying only the SHA1 digest (due to the limitation of the current measurement list format) is not sufficient, as hash collision detection will be done on the digest calculated with the IMA default hash algorithm. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-04-19ima: Allocate and initialize tfm for each PCR bankRoberto Sassu
This patch creates a crypto_shash structure for each allocated PCR bank and for SHA1 if a bank with that algorithm is not currently allocated. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-04-19ima: Switch to dynamically allocated buffer for template digestsRoberto Sassu
This patch dynamically allocates the array of tpm_digest structures in ima_alloc_init_template() and ima_restore_template_data(). The size of the array is equal to the number of PCR banks plus ima_extra_slots, to make room for SHA1 and the IMA default hash algorithm, when PCR banks with those algorithms are not allocated. Calculating the SHA1 digest is mandatory, as SHA1 still remains the default hash algorithm for the measurement list. When IMA will support the Crypto Agile format, remaining digests will be also provided. The position in the measurement entry array of the SHA1 digest is stored in the ima_sha1_idx global variable and is determined at IMA initialization time. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-04-19ima: Store template digest directly in ima_template_entryRoberto Sassu
In preparation for the patch that calculates a digest for each allocated PCR bank, this patch passes to ima_calc_field_array_hash() the ima_template_entry structure, so that digests can be directly stored in that structure instead of ima_digest_data. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-04-19ima: Switch to ima_hash_algo for boot aggregateRoberto Sassu
boot_aggregate is the first entry of IMA measurement list. Its purpose is to link pre-boot measurements to IMA measurements. As IMA was designed to work with a TPM 1.2, the SHA1 PCR bank was always selected even if a TPM 2.0 with support for stronger hash algorithms is available. This patch first tries to find a PCR bank with the IMA default hash algorithm. If it does not find it, it selects the SHA256 PCR bank for TPM 2.0 and SHA1 for TPM 1.2. Ultimately, it selects SHA1 also for TPM 2.0 if the SHA256 PCR bank is not found. If none of the PCR banks above can be found, boot_aggregate file digest is filled with zeros, as for TPM bypass, making it impossible to perform a remote attestation of the system. Cc: stable@vger.kernel.org # 5.1.x Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Jerry Snitselaar <jsnitsel@redhat.com> Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2020-02-28integrity: Remove duplicate pr_fmt definitionsTushar Sugandhi
The #define for formatting log messages, pr_fmt, is duplicated in the files under security/integrity. This change moves the definition to security/integrity/integrity.h and removes the duplicate definitions in the other files under security/integrity. With this change, the messages in the following files will be prefixed with 'integrity'. security/integrity/platform_certs/platform_keyring.c security/integrity/platform_certs/load_powerpc.c security/integrity/platform_certs/load_uefi.c security/integrity/iint.c e.g. "integrity: Error adding keys to platform keyring %s\n" And the messages in the following file will be prefixed with 'ima'. security/integrity/ima/ima_mok.c e.g. "ima: Allocating IMA blacklist keyring.\n" For the rest of the files under security/integrity, there will be no change in the message format. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-12-12ima: avoid appraise error for hash calc interruptPatrick Callaghan
The integrity_kernel_read() call in ima_calc_file_hash_tfm() can return a value of 0 before all bytes of the file are read. A value of 0 would normally indicate an EOF. This has been observed if a user process is causing a file appraisal and is terminated with a SIGTERM signal. The most common occurrence of seeing the problem is if a shutdown or systemd reload is initiated while files are being appraised. The problem is similar to commit <f5e1040196db> (ima: always return negative code for error) that fixed the problem in ima_calc_file_hash_atfm(). Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Patrick Callaghan <patrickc@linux.ibm.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-05ima: fix freeing ongoing ahash_requestSascha Hauer
integrity_kernel_read() can fail in which case we forward to call ahash_request_free() on a currently running request. We have to wait for its completion before we can free the request. This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0 cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-05ima: always return negative code for errorSascha Hauer
integrity_kernel_read() returns the number of bytes read. If this is a short read then this positive value is returned from ima_calc_file_hash_atfm(). Currently this is only indirectly called from ima_calc_file_hash() and this function only tests for the return value being zero or nonzero and also doesn't forward the return value. Nevertheless there's no point in returning a positive value as an error, so translate a short read into -EINVAL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-13tpm: retrieve digest size of unknown algorithms with PCR readRoberto Sassu
Currently, the TPM driver retrieves the digest size from a table mapping TPM algorithms identifiers to identifiers defined by the crypto subsystem. If the algorithm is not defined by the latter, the digest size can be retrieved from the output of the PCR read command. The patch modifies the definition of tpm_pcr_read() and tpm2_pcr_read() to pass the desired hash algorithm and obtain the digest size at TPM startup. Algorithms and corresponding digest sizes are stored in the new structure tpm_bank_info, member of tpm_chip, so that the information can be used by other kernel subsystems. tpm_bank_info contains: the TPM algorithm identifier, necessary to generate the event log as defined by Trusted Computing Group (TCG); the digest size, to pad/truncate a digest calculated with a different algorithm; the crypto subsystem identifier, to calculate the digest of event data. This patch also protects against data corruption that could happen in the bus, by checking that the digest size returned by the TPM during a PCR read matches the size of the algorithm passed to tpm2_pcr_read(). For the initial PCR read, when digest sizes are not yet available, this patch ensures that the amount of data copied from the output returned by the TPM does not exceed the size of the array data are copied to. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: use u32 instead of int for PCR indexTomas Winkler
The TPM specs defines PCR index as a positive number, and there is no reason to use a signed number. It is also a possible security issue as currently no functions check for a negative index, which may become a large number when converted to u32. Adjust the API to use u32 instead of int in all PCR related functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-10-10ima: open a new file instance if no read permissionsGoldwyn Rodrigues
Open a new file instance as opposed to changing file->f_mode when the file is not readable. This is done to accomodate overlayfs stacked file operations change. The real struct file is hidden behind the overlays struct file. So, any file->f_mode manipulations are not reflected on the real struct file. Open the file again in read mode if original file cannot be read, read and calculate the hash. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: stable@vger.kernel.org (linux-4.19) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2018-07-28ima: Get rid of ima_used_chip and use ima_tpm_chip != NULL insteadStefan Berger
Get rid of ima_used_chip and use ima_tpm_chip variable instead for determining whether to use the TPM chip. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-07-28ima: Use tpm_default_chip() and call TPM functions with a tpm_chipStefan Berger
Rather than accessing the TPM functions by passing a NULL pointer for the tpm_chip, which causes a lookup for a suitable chip every time, get a hold of a tpm_chip and access the TPM functions using it. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-03-25ima: Fallback to the builtin hash algorithmPetr Vorel
IMA requires having it's hash algorithm be compiled-in due to it's early use. The default IMA algorithm is protected by Kconfig to be compiled-in. The ima_hash kernel parameter allows to choose the hash algorithm. When the specified algorithm is not available or available as a module, IMA initialization fails, which leads to a kernel panic (mknodat syscall calls ima_post_path_mknod()). Therefore as fallback we force IMA to use the default builtin Kconfig hash algorithm. Fixed crash: $ grep CONFIG_CRYPTO_MD4 .config CONFIG_CRYPTO_MD4=m [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4 ... [ 1.545190] ima: Can not allocate md4 (reason: -2) ... [ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2.611903] IP: ima_match_policy+0x23/0x390 [ 2.612967] PGD 0 P4D 0 [ 2.613080] Oops: 0000 [#1] SMP [ 2.613080] Modules linked in: autofs4 [ 2.613080] Supported: Yes [ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1 [ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 [ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000 [ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390 [ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296 [ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004 [ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728 [ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000 [ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000 [ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0 [ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.613080] Call Trace: [ 2.613080] ? shmem_mknod+0xbf/0xd0 [ 2.613080] ima_post_path_mknod+0x1c/0x40 [ 2.613080] SyS_mknod+0x210/0x220 [ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 2.613080] RIP: 0033:0x7f5c1bfde570 [ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085 [ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570 [ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f [ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000 [ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660 [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002 [ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20 [ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88 [ 2.613080] CR2: 0000000000000000 [ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]--- [ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.673052] [ 2.675337] Kernel Offset: disabled [ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2018-01-08tpm: use struct tpm_chip for tpm_chip_find_get()Jarkko Sakkinen
Device number (the character device index) is not a stable identifier for a TPM chip. That is the reason why every call site passes TPM_ANY_NUM to tpm_chip_find_get(). This commit changes the API in a way that instead a struct tpm_chip instance is given and NULL means the default chip. In addition, this commit refines the documentation to be up to date with the implementation. Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> (@chip_num -> @chip part) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca> Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
2017-11-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-08ima: always measure and audit files in policyMimi Zohar
All files matching a "measure" rule must be included in the IMA measurement list, even when the file hash cannot be calculated. Similarly, all files matching an "audit" rule must be audited, even when the file hash can not be calculated. The file data hash field contained in the IMA measurement list template data will contain 0's instead of the actual file hash digest. Note: In general, adding, deleting or in anyway changing which files are included in the IMA measurement list is not a good idea, as it might result in not being able to unseal trusted keys sealed to a specific TPM PCR value. This patch not only adds file measurements that were not previously measured, but specifies that the file hash value for these files will be 0's. As the IMA measurement list ordering is not consistent from one boot to the next, it is unlikely that anyone is sealing keys based on the IMA measurement list. Remote attestation servers should be able to process these new measurement records, but might complain about these unknown records. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2017-11-03ima: move to generic async completionGilad Ben-Yossef
ima starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-20ima: platform-independent hash valueAndreas Steffen
For remote attestion it is important for the ima measurement values to be platform-independent. Therefore integer fields to be hashed must be converted to canonical format. Link: http://lkml.kernel.org/r/1480554346-29071-11-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Andreas Steffen <andreas.steffen@strongswan.org> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-18ima: calculate the hash of a buffer using aynchronous hash(ahash)Mimi Zohar
Setting up ahash has some overhead. Only use ahash to calculate the hash of a buffer, if the buffer is larger than ima_ahash_minsize. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-18ima: provide buffer hash calculation functionDmitry Kasatkin
This patch provides convenient buffer hash calculation function. Changelog v3: - fix while hash calculation - Dmitry v1: - rewrite to support loff_t sized buffers - Mimi (based on Fenguang Wu's testing) Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-18ima: separate 'security.ima' reading functionality from collectDmitry Kasatkin
Instead of passing pointers to pointers to ima_collect_measurent() to read and return the 'security.ima' xattr value, this patch moves the functionality to the calling process_measurement() to directly read the xattr and pass only the hash algo to the ima_collect_measurement(). Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-11-06mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-28kernel/params: constify struct kernel_param_ops usesLuis R. Rodriguez
Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-12-14Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: "In terms of changes, there's general maintenance to the Smack, SELinux, and integrity code. The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT, which allows IMA appraisal to require signatures. Support for reading keys from rootfs before init is call is also added" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) selinux: Remove security_ops extern security: smack: fix out-of-bounds access in smk_parse_smack() VFS: refactor vfs_read() ima: require signature based appraisal integrity: provide a hook to load keys when rootfs is ready ima: load x509 certificate from the kernel integrity: provide a function to load x509 certificate from the kernel integrity: define a new function integrity_read_file() Security: smack: replace kzalloc with kmem_cache for inode_smack Smack: Lock mode for the floor and hat labels ima: added support for new kernel cmdline parameter ima_template_fmt ima: allocate field pointers array on demand in template_desc_init_fields() ima: don't allocate a copy of template_fmt in template_desc_init_fields() ima: display template format in meas. list if template name length is zero ima: added error messages to template-related functions ima: use atomic bit operations to protect policy update interface ima: ignore empty and with whitespaces policy lines ima: no need to allocate entry for comment ima: report policy load status ima: use path names cache ...
2014-11-17integrity: define a new function integrity_read_file()Dmitry Kasatkin
This patch defines a new function called integrity_read_file() to read file from the kernel into a buffer. Subsequent patches will read a file containing the public keys and load them onto the IMA keyring. This patch moves and renames ima_kernel_read(), the non-security checking version of kernel_read(), to integrity_kernel_read(). Changes in v3: * Patch descriptions improved (Mimi) * Add missing cast (kbuild test robot) Changes in v2: * configuration option removed * function declared as '__init' Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-10-14security, crypto: LLVMLinux: Remove VLAIS from ima_crypto.cBehan Webster
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99 compliant equivalent. This patch allocates the appropriate amount of memory using a char array using the SHASH_DESC_ON_STACK macro. The new code can be compiled with both gcc and clang. Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Mark Charlebois <charlebm@gmail.com> Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Cc: tglx@linutronix.de
2014-09-09ima: add missing '__init' keywordsDmitry Kasatkin
Add missing keywords to the function definition to cleanup to discard initialization code. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Reviewed-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-02ima: fix fallback to use new_sync_read()Dmitry Kasatkin
3.16 commit aad4f8bb42af06371aa0e85bf0cd9d52c0494985 'switch simple generic_file_aio_read() users to ->read_iter()' replaced ->aio_read with ->read_iter in most of the file systems and introduced new_sync_read() as a replacement for do_sync_read(). Most of file systems set '->read' and ima_kernel_read is not affected. When ->read is not set, this patch adopts fallback call changes from the vfs_read. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> 3.16+
2014-09-02ima: prevent buffer overflow in ima_alloc_tfm()Dmitry Kasatkin
This patch fixes the case where the file's signature/hash xattr contains an invalid hash algorithm. Although we can not verify the xattr, we still need to measure the file. Use the default IMA hash algorithm. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-02ima: fix ima_alloc_atfm()Mimi Zohar
The patch 3bcced39ea7d: "ima: use ahash API for file hash calculation" from Feb 26, 2014, leads to the following static checker warning: security/integrity/ima/ima_crypto.c:204 ima_alloc_atfm()          error: buffer overflow 'hash_algo_name' 17 <= 17 Unlike shash tfm memory, which is allocated on initialization, the ahash tfm memory allocation is deferred until needed. This patch fixes the case where ima_ahash_tfm has not yet been allocated and the file's signature/hash xattr contains an invalid hash algorithm. Although we can not verify the xattr, we still need to measure the file. Use the default IMA hash algorithm. Changelog: - set valid algo before testing tfm - based on Dmitry's comment Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
2014-07-17ima: provide double buffering for hash calculationDmitry Kasatkin
The asynchronous hash API allows initiating a hash calculation and then performing other tasks, while waiting for the hash calculation to complete. This patch introduces usage of double buffering for simultaneous hashing and reading of the next chunk of data from storage. Changes in v3: - better comments Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17ima: introduce multi-page collect buffersDmitry Kasatkin
Use of multiple-page collect buffers reduces: 1) the number of block IO requests 2) the number of asynchronous hash update requests Second is important for HW accelerated hashing, because significant amount of time is spent for preparation of hash update operation, which includes configuring acceleration HW, DMA engine, etc... Thus, HW accelerators are more efficient when working on large chunks of data. This patch introduces usage of multi-page collect buffers. Buffer size can be specified using 'ahash_bufsize' module parameter. Default buffer size is 4096 bytes. Changes in v3: - kernel parameter replaced with module parameter Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17ima: use ahash API for file hash calculationDmitry Kasatkin
Async hash API allows the use of HW acceleration for hash calculation. It may give significant performance gain and/or reduce power consumption, which might be very beneficial for battery powered devices. This patch introduces hash calculation using ahash API. ahash performance depends on the data size and the particular HW. Depending on the specific system, shash performance may be better. This patch defines 'ahash_minsize' module parameter, which is used to define the minimal file size to use with ahash. If this minimum file size is not set or the file is smaller than defined by the parameter, shash will be used. Changes in v3: - kernel parameter replaced with module parameter - pr_crit replaced with pr_crit_ratelimited - more comment changes - Mimi Changes in v2: - ima_ahash_size became as ima_ahash - ahash pre-allocation moved out from __init code to be able to use ahash crypto modules. Ahash allocated once on the first use. - hash calculation falls back to shash if ahash allocation/calculation fails - complex initialization separated from variable declaration - improved comments Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-06-12ima: introduce ima_kernel_read()Dmitry Kasatkin
Commit 8aac62706 "move exit_task_namespaces() outside of exit_notify" introduced the kernel opps since the kernel v3.10, which happens when Apparmor and IMA-appraisal are enabled at the same time. ---------------------------------------------------------------------- [ 106.750167] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 106.750221] IP: [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.750241] PGD 0 [ 106.750254] Oops: 0000 [#1] SMP [ 106.750272] Modules linked in: cuse parport_pc ppdev bnep rfcomm bluetooth rpcsec_gss_krb5 nfsd auth_rpcgss nfs_acl nfs lockd sunrpc fscache dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd snd_hda_codec_realtek dcdbas snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi psmouse snd_seq microcode serio_raw snd_timer snd_seq_device snd soundcore video lpc_ich coretemp mac_hid lp parport mei_me mei nbd hid_generic e1000e usbhid ahci ptp hid libahci pps_core [ 106.750658] CPU: 6 PID: 1394 Comm: mysqld Not tainted 3.13.0-rc7-kds+ #15 [ 106.750673] Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A08 09/19/2012 [ 106.750689] task: ffff8800de804920 ti: ffff880400fca000 task.ti: ffff880400fca000 [ 106.750704] RIP: 0010:[<ffffffff811ec7da>] [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.750725] RSP: 0018:ffff880400fcba60 EFLAGS: 00010286 [ 106.750738] RAX: 0000000000000000 RBX: 0000000000000100 RCX: ffff8800d51523e7 [ 106.750764] RDX: ffffffffffffffea RSI: ffff880400fcba34 RDI: ffff880402d20020 [ 106.750791] RBP: ffff880400fcbae0 R08: 0000000000000000 R09: 0000000000000001 [ 106.750817] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800d5152300 [ 106.750844] R13: ffff8803eb8df510 R14: ffff880400fcbb28 R15: ffff8800d51523e7 [ 106.750871] FS: 0000000000000000(0000) GS:ffff88040d200000(0000) knlGS:0000000000000000 [ 106.750910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.750935] CR2: 0000000000000018 CR3: 0000000001c0e000 CR4: 00000000001407e0 [ 106.750962] Stack: [ 106.750981] ffffffff813434eb ffff880400fcbb20 ffff880400fcbb18 0000000000000000 [ 106.751037] ffff8800de804920 ffffffff8101b9b9 0001800000000000 0000000000000100 [ 106.751093] 0000010000000000 0000000000000002 000000000000000e ffff8803eb8df500 [ 106.751149] Call Trace: [ 106.751172] [<ffffffff813434eb>] ? aa_path_name+0x2ab/0x430 [ 106.751199] [<ffffffff8101b9b9>] ? sched_clock+0x9/0x10 [ 106.751225] [<ffffffff8134a68d>] aa_path_perm+0x7d/0x170 [ 106.751250] [<ffffffff8101b945>] ? native_sched_clock+0x15/0x80 [ 106.751276] [<ffffffff8134aa73>] aa_file_perm+0x33/0x40 [ 106.751301] [<ffffffff81348c5e>] common_file_perm+0x8e/0xb0 [ 106.751327] [<ffffffff81348d78>] apparmor_file_permission+0x18/0x20 [ 106.751355] [<ffffffff8130c853>] security_file_permission+0x23/0xa0 [ 106.751382] [<ffffffff811c77a2>] rw_verify_area+0x52/0xe0 [ 106.751407] [<ffffffff811c789d>] vfs_read+0x6d/0x170 [ 106.751432] [<ffffffff811cda31>] kernel_read+0x41/0x60 [ 106.751457] [<ffffffff8134fd45>] ima_calc_file_hash+0x225/0x280 [ 106.751483] [<ffffffff8134fb52>] ? ima_calc_file_hash+0x32/0x280 [ 106.751509] [<ffffffff8135022d>] ima_collect_measurement+0x9d/0x160 [ 106.751536] [<ffffffff810b552d>] ? trace_hardirqs_on+0xd/0x10 [ 106.751562] [<ffffffff8134f07c>] ? ima_file_free+0x6c/0xd0 [ 106.751587] [<ffffffff81352824>] ima_update_xattr+0x34/0x60 [ 106.751612] [<ffffffff8134f0d0>] ima_file_free+0xc0/0xd0 [ 106.751637] [<ffffffff811c9635>] __fput+0xd5/0x300 [ 106.751662] [<ffffffff811c98ae>] ____fput+0xe/0x10 [ 106.751687] [<ffffffff81086774>] task_work_run+0xc4/0xe0 [ 106.751712] [<ffffffff81066fad>] do_exit+0x2bd/0xa90 [ 106.751738] [<ffffffff8173c958>] ? retint_swapgs+0x13/0x1b [ 106.751763] [<ffffffff8106780c>] do_group_exit+0x4c/0xc0 [ 106.751788] [<ffffffff81067894>] SyS_exit_group+0x14/0x20 [ 106.751814] [<ffffffff8174522d>] system_call_fastpath+0x1a/0x1f [ 106.751839] Code: c3 0f 1f 44 00 00 55 48 89 e5 e8 22 fe ff ff 5d c3 0f 1f 44 00 00 55 65 48 8b 04 25 c0 c9 00 00 48 8b 80 28 06 00 00 48 89 e5 5d <48> 8b 40 18 48 39 87 c0 00 00 00 0f 94 c0 c3 0f 1f 80 00 00 00 [ 106.752185] RIP [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.752214] RSP <ffff880400fcba60> [ 106.752236] CR2: 0000000000000018 [ 106.752258] ---[ end trace 3c520748b4732721 ]--- ---------------------------------------------------------------------- The reason for the oops is that IMA-appraisal uses "kernel_read()" when file is closed. kernel_read() honors LSM security hook which calls Apparmor handler, which uses current->nsproxy->mnt_ns. The 'guilty' commit changed the order of cleanup code so that nsproxy->mnt_ns was not already available for Apparmor. Discussion about the issue with Al Viro and Eric W. Biederman suggested that kernel_read() is too high-level for IMA. Another issue, except security checking, that was identified is mandatory locking. kernel_read honors it as well and it might prevent IMA from calculating necessary hash. It was suggested to use simplified version of the function without security and locking checks. This patch introduces special version ima_kernel_read(), which skips security and mandatory locking checking. It prevents the kernel oops to happen. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org>
2014-03-07ima: skip memory allocation for empty filesDmitry Kasatkin
Memory allocation is unnecessary for empty files. This patch calculates the hash without memory allocation. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07integrity: fix checkpatch errorsDmitry Kasatkin
Between checkpatch changes (eg. sizeof) and inconsistencies between Lindent and checkpatch, unfixed checkpatch errors make it difficult to see new errors. This patch fixes them. Some lines with over 80 chars remained unchanged to improve code readability. The "extern" keyword is removed from internal evm.h to make it consistent with internal ima.h. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07security: integrity: Use a more current logging styleJoe Perches
Convert printks to pr_<level>. Add pr_fmt. Remove embedded prefixes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07ima: reduce memory usage when a template containing the n field is usedRoberto Sassu
Before this change, to correctly calculate the template digest for the 'ima' template, the event name field (id: 'n') length was set to the fixed size of 256 bytes. This patch reduces the length of the event name field to the string length incremented of one (to make room for the termination character '\0') and handles the specific case of the digest calculation for the 'ima' template directly in ima_calc_field_array_hash_tfm(). Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-11-25ima: do not include field length in template digest calc for ima templateRoberto Sassu
To maintain compatibility with userspace tools, the field length must not be included in the template digest calculation for the 'ima' template. Fixes commit: a71dc65 ima: switch to new template management mechanism Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25ima: switch to new template management mechanismRoberto Sassu
This patch performs the switch to the new template mechanism by modifying the functions ima_alloc_init_template(), ima_measurements_show() and ima_ascii_measurements_show(). The old function ima_template_show() was removed as it is no longer needed. Also, if the template descriptor used to generate a measurement entry is not 'ima', the whole length of field data stored for an entry is provided before the data itself through the binary_runtime_measurement interface. Changelog: - unnecessary to use strncmp() (Mimi Zohar) - create new variable 'field' in ima_alloc_init_template() (Roberto Sassu) - use GFP_NOFS flag in ima_alloc_init_template() (Roberto Sassu) - new variable 'num_fields' in ima_store_template() (Roberto Sassu, proposed by Mimi Zohar) - rename ima_calc_buffer_hash/template_hash() to ima_calc_field_array_hash(), something more generic (Mimi, requested by Dmitry) - sparse error fix - Fengguang Wu - fix lindent warnings - always include the field length in the template data length - include the template field length variable size in the template data length - include both the template field data and field length in the template digest calculation. Simplifies verifying the template digest. (Mimi) Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>