aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2015-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
2015-11-04Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for cipher output IVs in testmgr - Add missing crypto_ahash_blocksize helper - Mark authenc and des ciphers as not allowed under FIPS. Algorithms: - Add CRC support to 842 compression - Add keywrap algorithm - A number of changes to the akcipher interface: + Separate functions for setting public/private keys. + Use SG lists. Drivers: - Add Intel SHA Extension optimised SHA1 and SHA256 - Use dma_map_sg instead of custom functions in crypto drivers - Add support for STM32 RNG - Add support for ST RNG - Add Device Tree support to exynos RNG driver - Add support for mxs-dcp crypto device on MX6SL - Add xts(aes) support to caam - Add ctr(aes) and xts(aes) support to qat - A large set of fixes from Russell King for the marvell/cesa driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits) crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params() crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used hwrng: exynos - Add Device Tree support hwrng: exynos - Fix missing configuration after suspend to RAM hwrng: exynos - Add timeout for waiting on init done dt-bindings: rng: Describe Exynos4 PRNG bindings crypto: marvell/cesa - use __le32 for hardware descriptors crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op() crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio() crypto: marvell/cesa - use gfp_t for gfp flags crypto: marvell/cesa - use dma_addr_t for cur_dma crypto: marvell/cesa - use readl_relaxed()/writel_relaxed() crypto: caam - fix indentation of close braces crypto: caam - only export the state we really need to export crypto: caam - fix non-block aligned hash calculation crypto: caam - avoid needlessly saving and restoring caam_hash_ctx crypto: caam - print errno code when hash registration fails crypto: marvell/cesa - fix memory leak crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req() crypto: marvell/cesa - rearrange handling for sw padded hashes ...
2015-11-03Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "In this ARM merge, we remove more lines than we add. Changes include: - Enable imprecise aborts early, so that bus errors aren't masked until later in the boot. This has the side effect that boot loaders which provoke these aborts can cause the kernel to crash early in boot, so we install a handler to report this event around the site where these are enabled. - Remove the buggy but impossible to enable cmpxchg syscall code. - Add unwinding annotations to some assembly code. - Add support for atomic half-word exchange for ARMv6k+. - Reduce ioremap() alignment for SMP/LPAE cases where we don't need the large alignment. - Addition of an "optimal" 3G configuration for systems with 1G of RAM. - Increase vmalloc space by 128M. - Constify some SMP operations structures, which have never been writable. - Improve ARMs dma_mmap() support for mapping DMA coherent mappings into userspace. - Fix to the NMI backtrace code in the IPI case on ARM where the failing CPU gets stuck for 10s waiting for its own IPI to be delivered. - Removal of legacy PM support from the AMBA bus driver. - Another fix for the previous fix of vdsomunge" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (23 commits) ARM: 8449/1: fix bug in vdsomunge swab32 macro arm: add missing of_node_put ARM: 8447/1: catch pending imprecise abort on unmask ARM: 8446/1: amba: Remove unused callbacks for legacy system PM ARM: 8443/1: Adding support for atomic half word exchange ARM: clean up TWD after previous patch ARM: 8441/2: twd: Don't set CLOCK_EVT_FEAT_C3STOP unconditionally ARM: 8440/1: remove obsolete documentation ARM: make highpte an expert option ARM: 8433/1: add a VMSPLIT_3G_OPT config option ARM: 8439/1: Fix backtrace generation when IPI is masked ARM: 8428/1: kgdb: Fix registers on sleeping tasks ARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap() ARM: 8426/1: dma-mapping: add missing range check in dma_mmap() ARM: remove user cmpxchg syscall ARM: 8438/1: Add unwinding to __clear_user_std() ARM: 8436/1: hw_breakpoint: remove unnecessary header ARM: 8434/2: Revert "7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp" ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000 ARM: 8430/1: use default ioremap alignment for SMP or LPAE ...
2015-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-10-29Merge branches 'fixes' and 'misc' into for-nextRussell King
2015-10-23fault-inject: fix inverted interval/probability values in printkFlorian Westphal
interval displays the probability and vice versa. Fixes: 6adc4a22f20bb ("fault-inject: add ratelimit option") Acked-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-23lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=yAndrey Ryabinin
When the kernel compiled with KASAN=y, GCC adds redzones for each variable on stack. This enlarges function's stack frame and causes: 'warning: the frame size of X bytes is larger than Y bytes' The worst case I've seen for now is following: ../net/wireless/nl80211.c: In function `nl80211_send_wiphy': ../net/wireless/nl80211.c:1731:1: warning: the frame size of 5448 bytes is larger than 2048 bytes [-Wframe-larger-than=] That kind of warning becomes useless with KASAN=y. It doesn't necessarily indicate that there is some problem in the code, thus we should turn it off. (The KASAN=y stack size in increased from 16k to 32k for this reason) Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Abylay Ospan <aospan@netup.ru> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Kozlov Sergey <serjk@netup.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-20lib/mpi: fix off by one in mpi_read_raw_from_sglStephan Mueller
The patch fixes the analysis of the input data which contains an off by one. The issue is visible when the SGL contains one byte per SG entry. The code for checking for zero bytes does not operate on the data byte. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16lib/Kconfig: ZLIB_DEFLATE must select BITREVERSEAndrew Morton
lib/built-in.o: In function `__bitrev32': deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table' Anything which uses bitrevX() has to select BITREVERSE, to grab lib/bitrev.o. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-14crypto: 842 - Add CRC and validation supportHaren Myneni
This patch adds CRC generation and validation support for nx-842. Add CRC flag so that nx842 coprocessor includes CRC during compression and validates during decompression. Also changes in 842 SW compression to append CRC value at the end of template and checks during decompression. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-14lib/mpi: Add mpi sgl helpersTadeusz Struk
Add mpi_read_raw_from_sgl and mpi_write_to_sgl helpers. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-08random32: add prandom_init_once helper for own rngsDaniel Borkmann
Add a prandom_init_once() facility that works on the rnd_state, so that users that are keeping their own state independent from prandom_u32() can initialize their taus113 per cpu states. The motivation here is similar to net_get_random_once(): initialize the state as late as possible in the hope that enough entropy has been collected for the seeding. prandom_init_once() makes use of the recently introduced prandom_seed_full_state() helper and is generic enough so that it could also be used on fast-paths due to the DO_ONCE(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08random32: add prandom_seed_full_state helperDaniel Borkmann
Factor out the full reseed handling code that populates the state through get_random_bytes() and runs prandom_warmup(). The resulting prandom_seed_full_state() will be used later on in more than the current __prandom_reseed() user. Fix also two minor whitespace issues along the way. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08once: make helper generic for calling functions onceHannes Frederic Sowa
Make the get_random_once() helper generic enough, so that functions in general would only be called once, where one user of this is then net_get_random_once(). The only implementation specific call is to get_random_bytes(), all the rest of this *_once() facility would be duplicated among different subsystems otherwise. The new DO_ONCE() helper will be used by prandom() later on, but might also be useful for other scenarios/subsystems as well where a one-time initialization in often-called, possibly fast path code could occur. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: move net_get_random_once to libHannes Frederic Sowa
There's no good reason why users outside of networking should not be using this facility, f.e. for initializing their seeds. Therefore, make it accessible from there as get_random_once(). Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-06strscpy: zero any trailing garbage bytes in the destinationChris Metcalf
It's possible that the destination can be shadowed in userspace (as, for example, the perf buffers are now). So we should take care not to leak data that could be inspected by userspace. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-10-04Merge branch 'strscpy' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures
2015-10-03ARM: 8439/1: Fix backtrace generation when IPI is maskedDaniel Thompson
Currently on ARM when <SysRq-L> is triggered from an interrupt handler (e.g. a SysRq issued using UART or kbd) the main CPU will wedge for ten seconds with interrupts masked before issuing a backtrace for every CPU except itself. The new backtrace code introduced by commit 96f0e00378d4 ("ARM: add basic support for on-demand backtrace of other CPUs") does not work correctly when run from an interrupt handler because IPI_CPU_BACKTRACE is used to generate the backtrace on all CPUs but cannot preempt the current calling context. This can be fixed by detecting that the calling context cannot be preempted and issuing the backtrace directly in this case. Issuing directly leaves us without any pt_regs to pass to nmi_cpu_backtrace() so we also modify the generic code to call dump_stack() when its argument is NULL. Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-22lib: fix data race in rhashtable_rehash_oneDmitriy Vyukov
rhashtable_rehash_one() uses complex logic to update entry->next field, after INIT_RHT_NULLS_HEAD and NULLS_MARKER expansion: entry->next = 1 | ((base + off) << 1) This can be compiled along the lines of: entry->next = base + off entry->next <<= 1 entry->next |= 1 Which will break concurrent readers. NULLS value recomputation is not needed here, so just remove the complex logic. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22lib/iommu-common.c: do not try to deref a null iommu->lazy_flush() pointer ↵Sowmini Varadhan
when n < pool->hint The check for invoking iommu->lazy_flush() from iommu_tbl_range_alloc() has to be refactored so that we only call ->lazy_flush() if it is non-null. I had a sparc kernel that was crashing when I was trying to process some very large perf.data files- the crash happens when the scsi driver calls into dma_4v_map_sg and thus the iommu_tbl_range_alloc(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-17lib/string_helpers.c: fix infinite loop in string_get_size()Vitaly Kuznetsov
Some string_get_size() calls (e.g.: string_get_size(1, 512, STRING_UNITS_10, ..., ...) string_get_size(15, 64, STRING_UNITS_10, ..., ...) ) result in an infinite loop. The problem is that if size is equal to divisor[units]/blk_size and is smaller than divisor[units] we'll end up with size == 0 when we start doing sf_cap calculations: For string_get_size(1, 512, STRING_UNITS_10, ..., ...) case: ... remainder = do_div(size, divisor[units]); -> size is 0, remainder is 1 remainder *= blk_size; -> remainder is 512 ... size *= blk_size; -> size is still 0 size += remainder / divisor[units]; -> size is still 0 The caller causing the issue is sd_read_capacity(), the problem was noticed on Hyper-V, such weird size was reported by host when scanning collides with device removal. This is probably a separate issue worth fixing, this patch is intended to prevent the library routine from infinite looping. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10zlib_deflate/deftree: remove bi_reverse()yalin wang
Remove bi_reverse() and use generic bitrev32() instead - it should have better performance on some platforms. Signed-off-by: yalin wang <yalin.wang2010@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/decompress_unlzma: Do a NULL check for pointerFabio Estevam
Compare pointer-typed values to NULL rather than 0. The semantic patch that makes this change is available in scripts/coccinelle/null/badzero.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/decompressors: use real out buf size for gunzip with kernelYinghai Lu
When loading x86 64bit kernel above 4GiB with patched grub2, got kernel gunzip error. | early console in decompress_kernel | decompress_kernel: | input: [0x807f2143b4-0x807ff61aee] | output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len | boot via startup_64 | KASLR using RDTSC... | new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size | decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee] | | Decompressing Linux... gz... | | uncompression error | | -- System halted the new buffer is at 0x46fe000000ULL, decompressor_gzip is using 0xffffffb901ffffff as out_len. gunzip in lib/zlib_inflate/inflate.c cap that len to 0x01ffffff and decompress fails later. We could hit this problem with crashkernel booting that uses kexec loading kernel above 4GiB. We have decompress_* support: 1. inbuf[]/outbuf[] for kernel preboot. 2. inbuf[]/flush() for initramfs 3. fill()/flush() for initrd. This bug only affect kernel preboot path that use outbuf[]. Add __decompress and take real out_buf_len for gunzip instead of guessing wrong buf size. Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jon Medhurst <tixy@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/test_kasan.c: make kmalloc_oob_krealloc_less more correctlyWang Long
In kmalloc_oob_krealloc_less, I think it is better to test the size2 boundary. If we do not call krealloc, the access of position size1 will still cause out-of-bounds and access of position size2 does not. After call krealloc, the access of position size2 cause out-of-bounds. So using size2 is more correct. Signed-off-by: Wang Long <long.wanglong@huawei.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/test_kasan.c: fix a typoWang Long
Signed-off-by: Wang Long <long.wanglong@huawei.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/string_helpers: rename "esc" arg to "only"Kees Cook
To further clarify the purpose of the "esc" argument, rename it to "only" to reflect that it is a limit, not a list of additional characters to escape. Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/string_helpers: clarify esc arg in string_escape_memKees Cook
The esc argument is used to reduce which characters will be escaped. For example, using " " with ESCAPE_SPACE will not produce any escaped spaces. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mathias Krause <minipli@googlemail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/bitmap.c: bitmap_parselist can accept string with whitespaces on head or ↵Pan Xinhui
tail In __bitmap_parselist we can accept whitespaces on head or tail during every parsing procedure. If input has valid ranges, there is no reason to reject the user. For example, bitmap_parselist(" 1-3, 5, ", &mask, nmaskbits). After separating the string, we get " 1-3", " 5", and " ". It's possible and reasonable to accept such string as long as the parsing result is correct. Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/bitmap.c: fix a special string handling bug in __bitmap_parselistPan Xinhui
If string end with '-', for exapmle, bitmap_parselist("1,0-",&mask, nmaskbits), It is not in a valid pattern, so add a check after loop. Return -EINVAL on such condition. Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/bitmap.c: correct a code style and do some, optimizationPan Xinhui
We can avoid in-loop incrementation of ndigits. Save current totaldigits to ndigits before loop, and check ndigits against totaldigits after the loop. Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10kstrto*: accept "-0" for signed conversionAlexey Dobriyan
strtol(3) et al accept "-0", so should we. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10string: provide strscpy()Chris Metcalf
The strscpy() API is intended to be used instead of strlcpy(), and instead of most uses of strncpy(). - Unlike strlcpy(), it doesn't read from memory beyond (src + size). - Unlike strlcpy() or strncpy(), the API provides an easy way to check for destination buffer overflow: an -E2BIG error return value. - The provided implementation is robust in the face of the source buffer being asynchronously changed during the copy, unlike the current implementation of strlcpy(). - Unlike strncpy(), the destination buffer will be NUL-terminated if the string in the source buffer is too long. - Also unlike strncpy(), the destination buffer will not be updated beyond the NUL termination, avoiding strncpy's behavior of zeroing the entire tail end of the destination buffer. (A memset() after the strscpy() can be used if this behavior is desired.) - The implementation should be reasonably performant on all platforms since it uses the asm/word-at-a-time.h API rather than simple byte copy. Kernel-to-kernel string copy is not considered to be performance critical in any case. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: "Almost all of the rest of MM. There was an unusually large amount of MM material this time" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits) zpool: remove no-op module init/exit mm: zbud: constify the zbud_ops mm: zpool: constify the zpool_ops mm: swap: zswap: maybe_preload & refactoring zram: unify error reporting zsmalloc: remove null check from destroy_handle_cache() zsmalloc: do not take class lock in zs_shrinker_count() zsmalloc: use class->pages_per_zspage zsmalloc: consider ZS_ALMOST_FULL as migrate source zsmalloc: partial page ordering within a fullness_list zsmalloc: use shrinker to trigger auto-compaction zsmalloc: account the number of compacted pages zsmalloc/zram: introduce zs_pool_stats api zsmalloc: cosmetic compaction code adjustments zsmalloc: introduce zs_can_compact() function zsmalloc: always keep per-class stats zsmalloc: drop unused variable `nr_to_migrate' mm/memblock.c: fix comment in __next_mem_range() mm/page_alloc.c: fix type information of memoryless node memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node() ...
2015-09-08lib/show_mem.c: correct reserved memory calculationVishnu Pratap Singh
CMA reserved memory is not part of total reserved memory. Currently when we print the total reserve memory it considers cma as part of reserve memory and do minus of totalcma_pages from reserved, which is wrong. In cases where total reserved is less than cma reserved we will get negative values & while printing we print as unsigned and we will get a very large value. Below is the show mem output on X86 ubuntu based system where CMA reserved is 100MB (25600 pages) & total reserved is ~40MB(10316 pages). And reserve memory shows a large value because of this bug. Before: [ 127.066430] 898908 pages RAM [ 127.066432] 671682 pages HighMem/MovableOnly [ 127.066434] 4294952012 pages reserved [ 127.066436] 25600 pages cma reserved After: [ 44.663129] 898908 pages RAM [ 44.663130] 671682 pages HighMem/MovableOnly [ 44.663130] 10316 pages reserved [ 44.663131] 25600 pages cma reserved Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Danesh Petigara <dpetigara@broadcom.com> Cc: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-08Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - PKCS#7 support added to support signed kexec, also utilized for module signing. See comments in 3f1e1bea. ** NOTE: this requires linking against the OpenSSL library, which must be installed, e.g. the openssl-devel on Fedora ** - Smack - add IPv6 host labeling; ignore labels on kernel threads - support smack labeling mounts which use binary mount data - SELinux: - add ioctl whitelisting (see http://kernsec.org/files/lss2015/vanderstoep.pdf) - fix mprotect PROT_EXEC regression caused by mm change - Seccomp: - add ptrace options for suspend/resume" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits) PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them Documentation/Changes: Now need OpenSSL devel packages for module signing scripts: add extract-cert and sign-file to .gitignore modsign: Handle signing key in source tree modsign: Use if_changed rule for extracting cert from module signing key Move certificate handling to its own directory sign-file: Fix warning about BIO_reset() return value PKCS#7: Add MODULE_LICENSE() to test module Smack - Fix build error with bringup unconfigured sign-file: Document dependency on OpenSSL devel libraries PKCS#7: Appropriately restrict authenticated attributes and content type KEYS: Add a name for PKEY_ID_PKCS7 PKCS#7: Improve and export the X.509 ASN.1 time object decoder modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS extract-cert: Cope with multiple X.509 certificates in a single file sign-file: Generate CMS message as signature instead of PKCS#7 PKCS#7: Support CMS messages also [RFC5652] X.509: Change recorded SKID & AKID to not include Subject or Issuer PKCS#7: Check content type and versions MAINTAINERS: The keyrings mailing list has moved ...
2015-09-08Merge branch 'nmi' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull NMI backtrace update from Russell King: "These changes convert the x86 NMI handling to be a library implementation which other architectures can make use of. Thomas Gleixner has reviewed and tested these changes, and wishes me to send these rather than taking them through the tip tree. The final patch in the set adds an initial implementation using this infrastructure to ARM, even though it doesn't send the IPI at "NMI" level. Patches are in progress to add the ARM equivalent of NMI, but we still need the IRQ-level fallback for systems where the "NMI" isn't available due to secure firmware denying access to it" * 'nmi' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: add basic support for on-demand backtrace of other CPUs nmi: x86: convert to generic nmi handler nmi: create generic NMI backtrace implementation
2015-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "In this one: - d_move fixes (Eric Biederman) - UFS fixes (me; locking is mostly sane now, a bunch of bugs in error handling ought to be fixed) - switch of sb_writers to percpu rwsem (Oleg Nesterov) - superblock scalability (Josef Bacik and Dave Chinner) - swapon(2) race fix (Hugh Dickins)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits) vfs: Test for and handle paths that are unreachable from their mnt_root dcache: Reduce the scope of i_lock in d_splice_alias dcache: Handle escaped paths in prepend_path mm: fix potential data race in SyS_swapon inode: don't softlockup when evicting inodes inode: rename i_wb_list to i_io_list sync: serialise per-superblock sync operations inode: convert inode_sb_list_lock to per-sb inode: add hlist_fake to avoid the inode hash lock in evict writeback: plug writeback at a high level change sb_writers to use percpu_rw_semaphore shift percpu_counter_destroy() into destroy_super_work() percpu-rwsem: kill CONFIG_PERCPU_RWSEM percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire() percpu-rwsem: introduce percpu_down_read_trylock() document rwsem_release() in sb_wait_write() fix the broken lockdep logic in __sb_start_write() introduce __sb_writers_{acquired,release}() helpers ufs_inode_get{frag,block}(): get rid of 'phys' argument ufs_getfrag_block(): tidy up a bit ...
2015-09-05Merge tag 'md/4.3' of git://neil.brown.name/mdLinus Torvalds
Pull md updates from Neil Brown: - an assortment of little fixes, several for minor races only likely to be hit during testing - further cluster-md-raid1 development, not ready for real use yet. - new RAID6 syndrome code for ARM NEON - fix a race where a write can return before failure of one device is properly recorded in metadata, so an immediate crash might result in that write being lost. * tag 'md/4.3' of git://neil.brown.name/md: (33 commits) md/raid5: ensure device failure recorded before write request returns. md/raid5: use bio_list for the list of bios to return. md/raid10: ensure device failure recorded before write request returns. md/raid1: ensure device failure recorded before write request returns. md-cluster: remove inappropriate try_module_get from join() md: extend spinlock protection in register_md_cluster_operations md-cluster: Read the disk bitmap sb and check if it needs recovery md-cluster: only call complete(&cinfo->completion) when node join cluster md-cluster: add missed lockres_free md-cluster: remove the unused sb_lock md-cluster: init suspend_list and suspend_lock early in join md-cluster: add the error check if failed to get dlm lock md-cluster: init completion within lockres_init md-cluster: fix deadlock issue on message lock md-cluster: transfer the resync ownership to another node md-cluster: split recover_slot for future code reuse md-cluster: use %pU to print UUIDs md: setup safemode_timer before it's being used md/raid5: handle possible race as reshape completes. md: sync sync_completed has correct value as recovery finishes. ...
2015-09-05Merge linux-block/for-4.3/core into md/for-linuxNeilBrown
There were a few conflicts that are fairly easy to resolve. Signed-off-by: NeilBrown <neilb@suse.com>
2015-09-04genalloc: add support of multiple gen_pools per deviceVladimir Zapolskiy
This change fills devm_gen_pool_create()/gen_pool_get() "name" argument stub with contents and extends of_gen_pool_get() functionality on this basis. If there is no associated platform device with a device node passed to of_gen_pool_get(), the function attempts to get a label property or device node name (= repeats MTD OF partition standard) and seeks for a named gen_pool registered by device of the parent device node. The main idea of the change is to allow registration of independent gen_pools under the same umbrella device, say "partitions" on "storage device", the original functionality of one "partition" per "storage device" is untouched. [akpm@linux-foundation.org: fix constness in devres_find()] [dan.carpenter@oracle.com: freeing const data pointers] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()Vladimir Zapolskiy
This change modifies gen_pool_get() and devm_gen_pool_create() client interfaces adding one more argument "name" of a gen_pool object. Due to implementation gen_pool_get() is capable to retrieve only one gen_pool associated with a device even if multiple gen_pools are created, fortunately right at the moment it is sufficient for the clients, hence provide NULL as a valid argument on both producer devm_gen_pool_create() and consumer gen_pool_get() sides. Because only one created gen_pool per device is addressable, explicitly add a restriction to devm_gen_pool_create() to create only one gen_pool per device, this implies two possible error codes returned by the function, account it on client side (only misc/sram). This completes client side changes related to genalloc updates. [akpm@linux-foundation.org: gen_pool_get() cleanup] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and atomic updates from Ingo Molnar: "Main changes in this cycle are: - Extend atomic primitives with coherent logic op primitives (atomic_{or,and,xor}()) and deprecate the old partial APIs (atomic_{set,clear}_mask()) The old ops were incoherent with incompatible signatures across architectures and with incomplete support. Now every architecture supports the primitives consistently (by Peter Zijlstra) - Generic support for 'relaxed atomics': - _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return() - atomic_read_acquire() - atomic_set_release() This came out of porting qwrlock code to arm64 (by Will Deacon) - Clean up the fragile static_key APIs that were causing repeat bugs, by introducing a new one: DEFINE_STATIC_KEY_TRUE(name); DEFINE_STATIC_KEY_FALSE(name); which define a key of different types with an initial true/false value. Then allow: static_branch_likely() static_branch_unlikely() to take a key of either type and emit the right instruction for the case. To be able to know the 'type' of the static key we encode it in the jump entry (by Peter Zijlstra) - Static key self-tests (by Jason Baron) - qrwlock optimizations (by Waiman Long) - small futex enhancements (by Davidlohr Bueso) - ... and misc other changes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) jump_label/x86: Work around asm build bug on older/backported GCCs locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics locking/qrwlock: Implement queue_write_unlock() using smp_store_release() locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t' locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic locking/static_keys: Make verify_keys() static jump label, locking/static_keys: Update docs locking/static_keys: Provide a selftest jump_label: Provide a self-test s390/uaccess, locking/static_keys: employ static_branch_likely() x86, tsc, locking/static_keys: Employ static_branch_likely() locking/static_keys: Add selftest locking/static_keys: Add a new static_key interface locking/static_keys: Rework update logic locking/static_keys: Add static_key_{en,dis}able() helpers ...
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-09-02Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull SG updates from Jens Axboe: "This contains a set of scatter-gather related changes/fixes for 4.3: - Add support for limited chaining of sg tables even for architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph. - Add sg chain support to target_rd. From Christoph. - Fixup open coded sg->page_link in crypto/omap-sham. From Christoph. - Fixup open coded crypto ->page_link manipulation. From Dan. - Also from Dan, automated fixup of manual sg_unmark_end() manipulations. - Also from Dan, automated fixup of open coded sg_phys() implementations. - From Robert Jarzmik, addition of an sg table splitting helper that drivers can use" * 'for-4.3/sg' of git://git.kernel.dk/linux-block: lib: scatterlist: add sg splitting function scatterlist: use sg_phys() crypto/omap-sham: remove an open coded access to ->page_link scatterlist: remove open coded sg_unmark_end instances crypto: replace scatterwalk_sg_chain with sg_chain target/rd: always chain S/G list scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
2015-09-01Merge tag 'pm+acpi-4.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "From the number of commits perspective, the biggest items are ACPICA and cpufreq changes with the latter taking the lead (over 50 commits). On the cpufreq front, there are many cleanups and minor fixes in the core and governors, driver updates etc. We also have a new cpufreq driver for Mediatek MT8173 chips. ACPICA mostly updates its debug infrastructure and adds a number of fixes and cleanups for a good measure. The Operating Performance Points (OPP) framework is updated with new DT bindings and support for them among other things. We have a few updates of the generic power domains framework and a reorganization of the ACPI device enumeration code and bus type operations. And a lot of fixes and cleanups all over. Included is one branch from the MFD tree as it contains some PM-related driver core and ACPI PM changes a few other commits are based on. Specifics: - ACPICA update to upstream revision 20150818 including method tracing extensions to allow more in-depth AML debugging in the kernel and a number of assorted fixes and cleanups (Bob Moore, Lv Zheng, Markus Elfring). - ACPI sysfs code updates and a documentation update related to AML method tracing (Lv Zheng). - ACPI EC driver fix related to serialized evaluations of _Qxx methods and ACPI tools updates allowing the EC userspace tool to be built from the kernel source (Lv Zheng). - ACPI processor driver updates preparing it for future introduction of CPPC support and ACPI PCC mailbox driver updates (Ashwin Chaugule). - ACPI interrupts enumeration fix for a regression related to the handling of IRQ attribute conflicts between MADT and the ACPI namespace (Jiang Liu). - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar). - ACPI device registration code reorganization to separate the sysfs-related code and bus type operations from the rest (Rafael J Wysocki). - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause, Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss). - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan Xinhui, Rafael J Wysocki). - cpufreq core cleanups on top of the previous changes allowing it to preseve its sysfs directories over system suspend/resume (Viresh Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior). - cpufreq fixes and cleanups related to governors (Viresh Kumar). - cpufreq updates (core and the cpufreq-dt driver) related to the turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz). - New DT bindings for Operating Performance Points (OPP), support for them in the OPP framework and in the cpufreq-dt driver plus related OPP framework fixes and cleanups (Viresh Kumar). - cpufreq powernv driver updates (Shilpasri G Bhat). - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen). - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean). - intel_pstate driver updates including Skylake-S support, support for enabling HW P-states per CPU and an additional vendor bypass list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao). - cpuidle core fixes related to the handling of coupled idle states (Xunlei Pang). - intel_idle driver updates including Skylake Client support and support for freeze-mode-specific idle states (Len Brown). - Driver core updates related to power management (Andy Shevchenko, Rafael J Wysocki). - Generic power domains framework fixes and cleanups (Jon Hunter, Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson). - Device PM QoS framework update to allow the latency tolerance setting to be exposed to user space via sysfs (Mika Westerberg). - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas). - System sleep support updates (Alan Stern, Len Brown, SungEun Kim). - rockchip-io AVS support updates (Heiko Stuebner). - PM core clocks support fixup (Colin Ian King). - Power capping RAPL driver update including support for Skylake H/S and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi). - Generic device properties framework fixes related to the handling of static (driver-provided) property sets (Andy Shevchenko). - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat, Shreyas B Prabhu)" * tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output powercap / RAPL: disable the 2nd power limit properly tools: cpupower: Fix error when running cpupower monitor PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) ...
2015-09-01Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "The dominant change in this cycle was the continued work to isolate kernel drivers from MTRR legacies: this tree gets rid of all kernel internal driver interfaces to MTRRs (mostly by rewriting it to proper PAT interfaces), the only access left is the /proc/mtrr ABI. This work was done by Luis R Rodriguez. There's also some related PCI interface additions for which I've Cc:-ed Bjorn" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm/mtrr: Remove kernel internal MTRR interfaces: unexport mtrr_add() and mtrr_del() s390/io: Add pci_iomap_wc() and pci_iomap_wc_range() drivers/dma/iop-adma: Use dma_alloc_writecombine() kernel-style drivers/video/fbdev/vt8623fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/arkfb.c: Use arch_phys_wc_add() and pci_iomap_wc() PCI: Add pci_iomap_wc() variants drivers/video/fbdev/gxt4500: Use pci_ioremap_wc_bar() to map framebuffer drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() drivers/video/fbdev/i740fb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() PCI: Add pci_ioremap_wc_bar() x86/mm: Make kernel/check.c explicitly non-modular x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular x86/mm/pat: Add comments to cachemode translation tables arch/*/io.h: Add ioremap_uc() to all architectures drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc() drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC drivers/video/fbdev/atyfb: Clarify ioremap() base and length used drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default ...