aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-21Merge tag 'trace-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix memory leak on error path of process_system_preds() - Lock inversion fix with updating tgid recording option - Fix histogram compare function on big endian machines - Fix histogram trigger function on big endian machines - Make trace_printk() irq sync on init for kprobe selftest correctness * tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix endianness bug in histogram trigger samples/trace_printk: Wait for IRQ work to finish tracing: Fix lock inversion in trace_event_enable_tgid_record() tracing: Have the histogram compare functions convert to u64 first tracing: Avoid memory leak in process_system_preds()
2019-12-21tracing: Fix endianness bug in histogram triggerSven Schnelle
At least on PA-RISC and s390 synthetic histogram triggers are failing selftests because trace_event_raw_event_synth() always writes a 64 bit values, but the reader expects a field->size sized value. On little endian machines this doesn't hurt, but on big endian this makes the reader always read zero values. Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-21tracing: Fix lock inversion in trace_event_enable_tgid_record()Prateek Sood
Task T2 Task T3 trace_options_core_write() subsystem_open() mutex_lock(trace_types_lock) mutex_lock(event_mutex) set_tracer_flag() trace_event_enable_tgid_record() mutex_lock(trace_types_lock) mutex_lock(event_mutex) This gives a circular dependency deadlock between trace_types_lock and event_mutex. To fix this invert the usage of trace_types_lock and event_mutex in trace_options_core_write(). This keeps the sequence of lock usage consistent. Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com Cc: stable@vger.kernel.org Fixes: d914ba37d7145 ("tracing: Add support for recording tgid of tasks") Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-21Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: a (rare) PSI crash fix, a CPU affinity related balancing fix, and a toning down of active migration attempts" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cfs: fix spurious active migration sched/fair: Fix find_idlest_group() to handle CPU affinity psi: Fix a division error in psi poll() sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime
2019-12-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: a BTS fix, a PT NMI handling fix, a PMU sysfs fix and an SRCU annotation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Add SRCU annotation for pmus list walk perf/x86/intel: Fix PT PMI handling perf/x86/intel/bts: Fix the use of page_private() perf/x86: Fix potential out-of-bounds access
2019-12-19tracing: Have the histogram compare functions convert to u64 firstSteven Rostedt (VMware)
The compare functions of the histogram code would be specific for the size of the value being compared (byte, short, int, long long). It would reference the value from the array via the type of the compare, but the value was stored in a 64 bit number. This is fine for little endian machines, but for big endian machines, it would end up comparing zeros or all ones (depending on the sign) for anything but 64 bit numbers. To fix this, first derference the value as a u64 then convert it to the type being compared. Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map") Acked-by: Tom Zanussi <zanussi@kernel.org> Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-19tracing: Avoid memory leak in process_system_preds()Keita Suzuki
When failing in the allocation of filter_item, process_system_preds() goes to fail_mem, where the allocated filter is freed. However, this leads to memory leak of filter->filter_string and filter->prog, which is allocated before and in process_preds(). This bug has been detected by kmemleak as well. Fix this by changing kfree to __free_fiter. unreferenced object 0xffff8880658007c0 (size 32): comm "bash", pid 579, jiffies 4295096372 (age 17.752s) hex dump (first 32 bytes): 63 6f 6d 6d 6f 6e 5f 70 69 64 20 20 3e 20 31 30 common_pid > 10 00 00 00 00 00 00 00 00 65 73 00 00 00 00 00 00 ........es...... backtrace: [<0000000067441602>] kstrdup+0x2d/0x60 [<00000000141cf7b7>] apply_subsystem_event_filter+0x378/0x932 [<000000009ca32334>] subsystem_filter_write+0x5a/0x90 [<0000000072da2bee>] vfs_write+0xe1/0x240 [<000000004f14f473>] ksys_write+0xb4/0x150 [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0 [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888060c22d00 (size 64): comm "bash", pid 579, jiffies 4295096372 (age 17.752s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 e8 d7 41 80 88 ff ff ...........A.... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b8c1b109>] process_preds+0x243/0x1820 [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932 [<000000009ca32334>] subsystem_filter_write+0x5a/0x90 [<0000000072da2bee>] vfs_write+0xe1/0x240 [<000000004f14f473>] ksys_write+0xb4/0x150 [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0 [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888041d7e800 (size 512): comm "bash", pid 579, jiffies 4295096372 (age 17.752s) hex dump (first 32 bytes): 70 bc 85 97 ff ff ff ff 0a 00 00 00 00 00 00 00 p............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000001e04af34>] process_preds+0x71a/0x1820 [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932 [<000000009ca32334>] subsystem_filter_write+0x5a/0x90 [<0000000072da2bee>] vfs_write+0xe1/0x240 [<000000004f14f473>] ksys_write+0xb4/0x150 [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0 [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: http://lkml.kernel.org/r/20191211091258.11310-1-keitasuzuki.park@sslab.ics.keio.ac.jp Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 404a3add43c9c ("tracing: Only add filter list when needed") Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-19bpf: Fix record_func_key to perform backtracking on r3Daniel Borkmann
While testing Cilium with /unreleased/ Linus' tree under BPF-based NodePort implementation, I noticed a strange BPF SNAT engine behavior from time to time. In some cases it would do the correct SNAT/DNAT service translation, but at a random point in time it would just stop and perform an unexpected translation after SYN, SYN/ACK and stack would send a RST back. While initially assuming that there is some sort of a race condition in BPF code, adding trace_printk()s for debugging purposes at some point seemed to have resolved the issue auto-magically. Digging deeper on this Heisenbug and reducing the trace_printk() calls to an absolute minimum, it turns out that a single call would suffice to trigger / not trigger the seen RST issue, even though the logic of the program itself remains unchanged. Turns out the single call changed verifier pruning behavior to get everything to work. Reconstructing a minimal test case, the incorrect JIT dump looked as follows: # bpftool p d j i 11346 0xffffffffc0cba96c: [...] 21: movzbq 0x30(%rdi),%rax 26: cmp $0xd,%rax 2a: je 0x000000000000003a 2c: xor %edx,%edx 2e: movabs $0xffff89cc74e85800,%rsi 38: jmp 0x0000000000000049 3a: mov $0x2,%edx 3f: movabs $0xffff89cc74e85800,%rsi 49: mov -0x224(%rbp),%eax 4f: cmp $0x20,%eax 52: ja 0x0000000000000062 54: add $0x1,%eax 57: mov %eax,-0x224(%rbp) 5d: jmpq 0xffffffffffff6911 62: mov $0x1,%eax [...] Hence, unexpectedly, JIT emitted a direct jump even though retpoline based one would have been needed since in line 2c and 3a we have different slot keys in BPF reg r3. Verifier log of the test case reveals what happened: 0: (b7) r0 = 14 1: (73) *(u8 *)(r1 +48) = r0 2: (71) r0 = *(u8 *)(r1 +48) 3: (15) if r0 == 0xd goto pc+4 R0_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0 4: (b7) r3 = 0 5: (18) r2 = 0xffff89cc74d54a00 7: (05) goto pc+3 11: (85) call bpf_tail_call#12 12: (b7) r0 = 1 13: (95) exit from 3 to 8: R0_w=inv13 R1=ctx(id=0,off=0,imm=0) R10=fp0 8: (b7) r3 = 2 9: (18) r2 = 0xffff89cc74d54a00 11: safe processed 13 insns (limit 1000000) [...] Second branch is pruned by verifier since considered safe, but issue is that record_func_key() couldn't have seen the index in line 3a and therefore decided that emitting a direct jump at this location was okay. Fix this by reusing our backtracking logic for precise scalar verification in order to prevent pruning on the slot key. This means verifier will track content of r3 all the way backwards and only prune if both scalars were unknown in state equivalence check and therefore poisoned in the first place in record_func_key(). The range is [x,x] in record_func_key() case since the slot always would have to be constant immediate. Correct verification after fix: 0: (b7) r0 = 14 1: (73) *(u8 *)(r1 +48) = r0 2: (71) r0 = *(u8 *)(r1 +48) 3: (15) if r0 == 0xd goto pc+4 R0_w=invP(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0 4: (b7) r3 = 0 5: (18) r2 = 0x0 7: (05) goto pc+3 11: (85) call bpf_tail_call#12 12: (b7) r0 = 1 13: (95) exit from 3 to 8: R0_w=invP13 R1=ctx(id=0,off=0,imm=0) R10=fp0 8: (b7) r3 = 2 9: (18) r2 = 0x0 11: (85) call bpf_tail_call#12 12: (b7) r0 = 1 13: (95) exit processed 15 insns (limit 1000000) [...] And correct corresponding JIT dump: # bpftool p d j i 11 0xffffffffc0dc34c4: [...] 21: movzbq 0x30(%rdi),%rax 26: cmp $0xd,%rax 2a: je 0x000000000000003a 2c: xor %edx,%edx 2e: movabs $0xffff9928b4c02200,%rsi 38: jmp 0x0000000000000049 3a: mov $0x2,%edx 3f: movabs $0xffff9928b4c02200,%rsi 49: cmp $0x4,%rdx 4d: jae 0x0000000000000093 4f: and $0x3,%edx 52: mov %edx,%edx 54: cmp %edx,0x24(%rsi) 57: jbe 0x0000000000000093 59: mov -0x224(%rbp),%eax 5f: cmp $0x20,%eax 62: ja 0x0000000000000093 64: add $0x1,%eax 67: mov %eax,-0x224(%rbp) 6d: mov 0x110(%rsi,%rdx,8),%rax 75: test %rax,%rax 78: je 0x0000000000000093 7a: mov 0x30(%rax),%rax 7e: add $0x19,%rax 82: callq 0x000000000000008e 87: pause 89: lfence 8c: jmp 0x0000000000000087 8e: mov %rax,(%rsp) 92: retq 93: mov $0x1,%eax [...] Also explicitly adding explicit env->allow_ptr_leaks to fixup_bpf_calls() since backtracking is enabled under former (direct jumps as well, but use different test). In case of only tracking different map pointers as in c93552c443eb ("bpf: properly enforce index mask to prevent out-of-bounds speculation"), pruning cannot make such short-cuts, neither if there are paths with scalar and non-scalar types as r3. mark_chain_precision() is only needed after we know that register_is_const(). If it was not the case, we already poison the key on first path and non-const key in later paths are not matching the scalar range in regsafe() either. Cilium NodePort testing passes fine as well now. Note, released kernels not affected. Fixes: d2e4c1e6c294 ("bpf: Constant map key tracking for prog array pokes") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/ac43ffdeb7386c5bd688761ed266f3722bb39823.1576789878.git.daniel@iogearbox.net
2019-12-19Merge tag 'pm-5.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a problem related to CPU offline/online and cpufreq governors that in some system configurations may lead to a system-wide deadlock during CPU online" * tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Avoid leaving stale IRQ work items during CPU offline
2019-12-17Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Tone down mutex debugging complaints, and annotate/fix spinlock debugging data accesses for KCSAN" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts" locking/spinlock/debug: Fix various data races
2019-12-17bpf: Fix cgroup local storage prog trackingDaniel Borkmann
Recently noticed that we're tracking programs related to local storage maps through their prog pointer. This is a wrong assumption since the prog pointer can still change throughout the verification process, for example, whenever bpf_patch_insn_single() is called. Therefore, the prog pointer that was assigned via bpf_cgroup_storage_assign() is not guaranteed to be the same as we pass in bpf_cgroup_storage_release() and the map would therefore remain in busy state forever. Fix this by using the prog's aux pointer which is stable throughout verification and beyond. Fixes: de9cbbaadba5 ("bpf: introduce cgroup storage maps") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/1471c69eca3022218666f909bc927a92388fd09e.1576580332.git.daniel@iogearbox.net
2019-12-17sched/cfs: fix spurious active migrationVincent Guittot
The load balance can fail to find a suitable task during the periodic check because the imbalance is smaller than half of the load of the waiting tasks. This results in the increase of the number of failed load balance, which can end up to start an active migration. This active migration is useless because the current running task is not a better choice than the waiting ones. In fact, the current task was probably not running but waiting for the CPU during one of the previous attempts and it had already not been selected. When load balance fails too many times to migrate a task, we should relax the contraint on the maximum load of the tasks that can be migrated similarly to what is done with cache hotness. Before the rework, load balance used to set the imbalance to the average load_per_task in order to mitigate such situation. This increased the likelihood of migrating a task but also of selecting a larger task than needed while more appropriate ones were in the list. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1575036287-6052-1-git-send-email-vincent.guittot@linaro.org
2019-12-17sched/fair: Fix find_idlest_group() to handle CPU affinityVincent Guittot
Because of CPU affinity, the local group can be skipped which breaks the assumption that statistics are always collected for local group. With uninitialized local_sgs, the comparison is meaningless and the behavior unpredictable. This can even end up to use local pointer which is to NULL in this case. If the local group has been skipped because of CPU affinity, we return the idlest group. Fixes: 57abff067a08 ("sched/fair: Rework find_idlest_group()") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: John Stultz <john.stultz@linaro.org> Cc: rostedt@goodmis.org Cc: valentin.schneider@arm.com Cc: mingo@redhat.com Cc: mgorman@suse.de Cc: juri.lelli@redhat.com Cc: dietmar.eggemann@arm.com Cc: bsegall@google.com Cc: qais.yousef@arm.com Link: https://lkml.kernel.org/r/1575483700-22153-1-git-send-email-vincent.guittot@linaro.org
2019-12-17psi: Fix a division error in psi poll()Johannes Weiner
The psi window size is a u64 an can be up to 10 seconds right now, which exceeds the lower 32 bits of the variable. We currently use div_u64 for it, which is meant only for 32-bit divisors. The result is garbage pressure sampling values and even potential div0 crashes. Use div64_u64. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: Jingfeng Xie <xiejingfeng@linux.alibaba.com> Link: https://lkml.kernel.org/r/20191203183524.41378-3-hannes@cmpxchg.org
2019-12-17sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptimeJohannes Weiner
Jingfeng reports rare div0 crashes in psi on systems with some uptime: [58914.066423] divide error: 0000 [#1] SMP [58914.070416] Modules linked in: ipmi_poweroff ipmi_watchdog toa overlay fuse tcp_diag inet_diag binfmt_misc aisqos(O) aisqos_hotfixes(O) [58914.083158] CPU: 94 PID: 140364 Comm: kworker/94:2 Tainted: G W OE K 4.9.151-015.ali3000.alios7.x86_64 #1 [58914.093722] Hardware name: Alibaba Alibaba Cloud ECS/Alibaba Cloud ECS, BIOS 3.23.34 02/14/2019 [58914.102728] Workqueue: events psi_update_work [58914.107258] task: ffff8879da83c280 task.stack: ffffc90059dcc000 [58914.113336] RIP: 0010:[] [] psi_update_stats+0x1c1/0x330 [58914.122183] RSP: 0018:ffffc90059dcfd60 EFLAGS: 00010246 [58914.127650] RAX: 0000000000000000 RBX: ffff8858fe98be50 RCX: 000000007744d640 [58914.134947] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00003594f700648e [58914.142243] RBP: ffffc90059dcfdf8 R08: 0000359500000000 R09: 0000000000000000 [58914.149538] R10: 0000000000000000 R11: 0000000000000000 R12: 0000359500000000 [58914.156837] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8858fe98bd78 [58914.164136] FS: 0000000000000000(0000) GS:ffff887f7f380000(0000) knlGS:0000000000000000 [58914.172529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [58914.178467] CR2: 00007f2240452090 CR3: 0000005d5d258000 CR4: 00000000007606f0 [58914.185765] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [58914.193061] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [58914.200360] PKRU: 55555554 [58914.203221] Stack: [58914.205383] ffff8858fe98bd48 00000000000002f0 0000002e81036d09 ffffc90059dcfde8 [58914.213168] ffff8858fe98bec8 0000000000000000 0000000000000000 0000000000000000 [58914.220951] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [58914.228734] Call Trace: [58914.231337] [] psi_update_work+0x22/0x60 [58914.237067] [] process_one_work+0x189/0x420 [58914.243063] [] worker_thread+0x4e/0x4b0 [58914.248701] [] ? process_one_work+0x420/0x420 [58914.254869] [] kthread+0xe6/0x100 [58914.259994] [] ? kthread_park+0x60/0x60 [58914.265640] [] ret_from_fork+0x39/0x50 [58914.271193] Code: 41 29 c3 4d 39 dc 4d 0f 42 dc <49> f7 f1 48 8b 13 48 89 c7 48 c1 [58914.279691] RIP [] psi_update_stats+0x1c1/0x330 The crashing instruction is trying to divide the observed stall time by the sampling period. The period, stored in R8, is not 0, but we are dividing by the lower 32 bits only, which are all 0 in this instance. We could switch to a 64-bit division, but the period shouldn't be that big in the first place. It's the time between the last update and the next scheduled one, and so should always be around 2s and comfortably fit into 32 bits. The bug is in the initialization of new cgroups: we schedule the first sampling event in a cgroup as an offset of sched_clock(), but fail to initialize the last_update timestamp, and it defaults to 0. That results in a bogusly large sampling period the first time we run the sampling code, and consequently we underreport pressure for the first 2s of a cgroup's life. But worse, if sched_clock() is sufficiently advanced on the system, and the user gets unlucky, the period's lower 32 bits can all be 0 and the sampling division will crash. Fix this by initializing the last update timestamp to the creation time of the cgroup, thus correctly marking the start of the first pressure sampling period in a new cgroup. Reported-by: Jingfeng Xie <xiejingfeng@linux.alibaba.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Link: https://lkml.kernel.org/r/20191203183524.41378-2-hannes@cmpxchg.org
2019-12-17perf/core: Add SRCU annotation for pmus list walkSebastian Andrzej Siewior
Since commit 28875945ba98d ("rcu: Add support for consolidated-RCU reader checking") there is an additional check to ensure that a RCU related lock is held while the RCU list is iterated. This section holds the SRCU reader lock instead. Add annotation to list_for_each_entry_rcu() that pmus_srcu must be acquired during the list traversal. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lkml.kernel.org/r/20191119121429.zhcubzdhm672zasg@linutronix.de
2019-12-16bpf: Fix missing prog untrack in release_mapsDaniel Borkmann
Commit da765a2f5993 ("bpf: Add poke dependency tracking for prog array maps") wrongly assumed that in case of prog load errors, we're cleaning up all program tracking via bpf_free_used_maps(). However, it can happen that we're still at the point where we didn't copy map pointers into the prog's aux section such that env->prog->aux->used_maps is still zero, running into a UAF. In such case, the verifier has similar release_maps() helper that drops references to used maps from its env. Consolidate the release code into __bpf_free_used_maps() and call it from all sides to fix it. Fixes: da765a2f5993 ("bpf: Add poke dependency tracking for prog array maps") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/1c2909484ca524ae9f55109b06f22b6213e76376.1576514756.git.daniel@iogearbox.net
2019-12-13Merge tag 'sizeof_field-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull FIELD_SIZEOF conversion from Kees Cook: "A mostly mechanical treewide conversion from FIELD_SIZEOF() to sizeof_field(). This avoids the redundancy of having 2 macros (actually 3) doing the same thing, and consolidates on sizeof_field(). While "field" is not an accurate name, it is the common name used in the kernel, and doesn't result in any unintended innuendo. As there are still users of FIELD_SIZEOF() in -next, I will clean up those during this coming development cycle and send the final old macro removal patch at that time" * tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use sizeof_field() macro MIPS: OCTEON: Replace SIZEOF_FIELD() macro
2019-12-12cpufreq: Avoid leaving stale IRQ work items during CPU offlineRafael J. Wysocki
The scheduler code calling cpufreq_update_util() may run during CPU offline on the target CPU after the IRQ work lists have been flushed for it, so the target CPU should be prevented from running code that may queue up an IRQ work item on it at that point. Unfortunately, that may not be the case if dvfs_possible_from_any_cpu is set for at least one cpufreq policy in the system, because that allows the CPU going offline to run the utilization update callback of the cpufreq governor on behalf of another (online) CPU in some cases. If that happens, the cpufreq governor callback may queue up an IRQ work on the CPU running it, which is going offline, and the IRQ work may not be flushed after that point. Moreover, that IRQ work cannot be flushed until the "offlining" CPU goes back online, so if any other CPU calls irq_work_sync() to wait for the completion of that IRQ work, it will have to wait until the "offlining" CPU is back online and that may not happen forever. In particular, a system-wide deadlock may occur during CPU online as a result of that. The failing scenario is as follows. CPU0 is the boot CPU, so it creates a cpufreq policy and becomes the "leader" of it (policy->cpu). It cannot go offline, because it is the boot CPU. Next, other CPUs join the cpufreq policy as they go online and they leave it when they go offline. The last CPU to go offline, say CPU3, may queue up an IRQ work while running the governor callback on behalf of CPU0 after leaving the cpufreq policy because of the dvfs_possible_from_any_cpu effect described above. Then, CPU0 is the only online CPU in the system and the stale IRQ work is still queued on CPU3. When, say, CPU1 goes back online, it will run irq_work_sync() to wait for that IRQ work to complete and so it will wait for CPU3 to go back online (which may never happen even in principle), but (worse yet) CPU0 is waiting for CPU1 at that point too and a system-wide deadlock occurs. To address this problem notice that CPUs which cannot run cpufreq utilization update code for themselves (for example, because they have left the cpufreq policies that they belonged to), should also be prevented from running that code on behalf of the other CPUs that belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so in that case the cpufreq_update_util_data pointer of the CPU running the code must not be NULL as well as for the CPU which is the target of the cpufreq utilization update in progress. Accordingly, change cpufreq_this_cpu_can_update() into a regular function in kernel/sched/cpufreq.c (instead of a static inline in a header file) and make it check the cpufreq_update_util_data pointer of the local CPU if dvfs_possible_from_any_cpu is set for the target cpufreq policy. Also update the schedutil governor to do the cpufreq_this_cpu_can_update() check in the non-fast-switch case too to avoid the stale IRQ work issues. Fixes: 99d14d0e16fa ("cpufreq: Process remote callbacks from any CPU if the platform permits") Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/ Reported-by: Anson Huang <anson.huang@nxp.com> Tested-by: Anson Huang <anson.huang@nxp.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-11bpf: Make BPF trampoline use register_ftrace_direct() APIAlexei Starovoitov
Make BPF trampoline attach its generated assembly code to kernel functions via register_ftrace_direct() API. It helps ftrace-based tracers co-exist with BPF trampoline on the same kernel function. It also switches attaching logic from arch specific text_poke to generic ftrace that is available on many architectures. text_poke is still necessary for bpf-to-bpf attach and for bpf_tail_call optimization. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191209000114.1876138-3-ast@kernel.org
2019-12-11Merge tag 'trace-v5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Remove code I accidentally applied when doing a minor fix up to a patch, and then using "git commit -a --amend", which pulled in some other changes I was playing with. - Remove an used variable in trace_events_inject code - Fix function graph tracer when it traces a ftrace direct function. It will now ignore tracing a function that has a ftrace direct tramploine attached. This is needed for eBPF to use the ftrace direct code. * tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix function_graph tracer interaction with BPF trampoline tracing: remove set but not used variable 'buffer' module: Remove accidental change of module_enable_x()
2019-12-11bpf: Fix build in minimal configurations, againArnd Bergmann
Building with -Werror showed another failure: kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31': kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds] ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2; I don't actually understand why the array is empty, but a similar fix has addressed a related problem, so I suppose we can do the same thing here. Fixes: ce27709b8162 ("bpf: Fix build in minimal configurations") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210203553.2941035-1-arnd@arndb.de
2019-12-11Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts"Davidlohr Bueso
This ended up causing some noise in places such as rxrpc running in softirq. The warning is misleading in this case as the mutex trylock and unlock operations are done within the same context; and therefore we need not worry about the PI-boosting issues that comes along with no single-owner lock guarantees. While we don't want to support this in mutexes, there is no way out of this yet; so lets get rid of the WARNs for now, as it is only fair to code that has historically relied on non-preemptible softirq guarantees. In addition, changing the lock type is also unviable: exclusive rwsems have the same issue (just not the WARN_ON) and counting semaphores would introduce a performance hit as mutexes are a lot more optimized. This reverts: a0855d24fc22: ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") Fixes: a0855d24fc22: ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Tested-by: David Howells <dhowells@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-afs@lists.infradead.org Cc: linux-fsdevel@vger.kernel.org Cc: will@kernel.org Link: https://lkml.kernel.org/r/20191210220523.28540-1-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-10ftrace: Fix function_graph tracer interaction with BPF trampolineAlexei Starovoitov
Depending on type of BPF programs served by BPF trampoline it can call original function. In such case the trampoline will skip one stack frame while returning. That will confuse function_graph tracer and will cause crashes with bad RIP. Teach graph tracer to skip functions that have BPF trampoline attached. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-10tracing: remove set but not used variable 'buffer'YueHaibing
kernel/trace/trace_events_inject.c: In function trace_inject_entry: kernel/trace/trace_events_inject.c:20:22: warning: variable buffer set but not used [-Wunused-but-set-variable] It is never used, so remove it. Link: http://lkml.kernel.org/r/20191207034409.25668-1-yuehaibing@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-10module: Remove accidental change of module_enable_x()Steven Rostedt (VMware)
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded braces. I commited my fix up via "git commit -a --amend". Unfortunately, I didn't realize I had some changes I was testing in the module code, and those changes were applied to Divya's patch as well. This reverts the accidental updates to the module code. Cc: Jessica Yu <jeyu@kernel.org> Cc: Divya Indi <divya.indi@oracle.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Fixes: e585e6469d6f ("tracing: Verify if trace array exists before destroying it.") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-09Merge tag 'printk-for-5.5-pr-warning-removal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull pr_warning() removal from Petr Mladek. - Final removal of the unused pr_warning() alias. You're supposed to use just "pr_warn()" in the kernel. * tag 'printk-for-5.5-pr-warning-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: checkpatch: Drop pr_warning check printk: Drop pr_warning definition Fix up for "printk: Drop pr_warning definition" workqueue: Use pr_warn instead of pr_warning
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-06Fix up for "printk: Drop pr_warning definition"Stephen Rothwell
Link: http://lkml.kernel.org/r/20191206092503.303d6a57@canb.auug.org.au Cc: Linux Next Mailing List <linux-next@vger.kernel.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-12-06workqueue: Use pr_warn instead of pr_warningKefeng Wang
Use pr_warn() instead of the remaining pr_warning() calls. Link: http://lkml.kernel.org/r/20191128004752.35268-2-wangkefeng.wang@huawei.com To: joe@perches.com To: linux-kernel@vger.kernel.org Cc: gregkh@linuxfoundation.org Cc: tj@kernel.org Cc: arnd@arndb.de Cc: sergey.senozhatsky@gmail.com Cc: rostedt@goodmis.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-12-05Merge tag 'modules-for-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Summary of modules changes for the 5.5 merge window: - Refactor include/linux/export.h and remove code duplication between EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable. The most notable change is that no namespace is represented by an empty string "" rather than NULL. - Fix a module load/unload race where waiter(s) trying to load the same module weren't being woken up when a module finally goes away" * tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: kernel/module.c: wakeup processes in module_wq on module unload moduleparam: fix parameter description mismatch export: avoid code duplication in include/linux/export.h
2019-12-05Merge branch 'thermal/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...
2019-12-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "Most of the rest of MM and various other things. Some Kconfig rework still awaits merges of dependent trees from linux-next. Subsystems affected by this patch series: mm/hotfixes, mm/memcg, mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel, bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov, ubsan, ipc, bitmap, mm/pagemap" * akpm: (86 commits) mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h um: add support for folded p4d page tables um: remove unused pxx_offset_proc() and addr_pte() functions sparc32: use pgtable-nopud instead of 4level-fixup parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup parisc: use pgtable-nopXd instead of 4level-fixup nds32: use pgtable-nopmd instead of 4level-fixup microblaze: use pgtable-nopmd instead of 4level-fixup m68k: mm: use pgtable-nopXd instead of 4level-fixup m68k: nommu: use pgtable-nopud instead of 4level-fixup c6x: use pgtable-nopud instead of 4level-fixup arm: nommu: use pgtable-nopud instead of 4level-fixup alpha: use pgtable-nopud instead of 4level-fixup gpio: pca953x: tighten up indentation gpio: pca953x: convert to use bitmap API gpio: pca953x: use input from regs structure in pca953x_irq_pending() gpio: pca953x: remove redundant variable and check in IRQ handler lib/bitmap: introduce bitmap_replace() helper lib/test_bitmap: fix comment about this file lib/test_bitmap: move exp1 and exp2 upper for others to use ...
2019-12-04bpf: Fix a bug when getting subprog 0 jited image in check_attach_btf_idYonghong Song
For jited bpf program, if the subprogram count is 1, i.e., there is no callees in the program, prog->aux->func will be NULL and prog->bpf_func points to image address of the program. If there is more than one subprogram, prog->aux->func is populated, and subprogram 0 can be accessed through either prog->bpf_func or prog->aux->func[0]. Other subprograms should be accessed through prog->aux->func[subprog_id]. This patch fixed a bug in check_attach_btf_id(), where prog->aux->func[subprog_id] is used to access any subprogram which caused a segfault like below: [79162.619208] BUG: kernel NULL pointer dereference, address: 0000000000000000 ...... [79162.634255] Call Trace: [79162.634974] ? _cond_resched+0x15/0x30 [79162.635686] ? kmem_cache_alloc_trace+0x162/0x220 [79162.636398] ? selinux_bpf_prog_alloc+0x1f/0x60 [79162.637111] bpf_prog_load+0x3de/0x690 [79162.637809] __do_sys_bpf+0x105/0x1740 [79162.638488] do_syscall_64+0x5b/0x180 [79162.639147] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ...... Fixes: 5b92a28aae4d ("bpf: Support attaching tracing BPF program to other BPF programs") Reported-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191205010606.177774-1-yhs@fb.com
2019-12-04kcov: remote coverage supportAndrey Konovalov
Patch series " kcov: collect coverage from usb and vhost", v3. This patchset extends kcov to allow collecting coverage from backgound kernel threads. This extension requires custom annotations for each of the places where coverage collection is desired. This patchset implements this for hub events in the USB subsystem and for vhost workers. See the first patch description for details about the kcov extension. The other two patches apply this kcov extension to USB and vhost. Examples of other subsystems that might potentially benefit from this when custom annotations are added (the list is based on process_one_work() callers for bugs recently reported by syzbot): 1. fs: writeback wb_workfn() worker, 2. net: addrconf_dad_work()/addrconf_verify_work() workers, 3. net: neigh_periodic_work() worker, 4. net/p9: p9_write_work()/p9_read_work() workers, 5. block: blk_mq_run_work_fn() worker. These patches have been used to enable coverage-guided USB fuzzing with syzkaller for the last few years, see the details here: https://github.com/google/syzkaller/blob/master/docs/linux/external_fuzzing_usb.md This patchset has been pushed to the public Linux kernel Gerrit instance: https://linux-review.googlesource.com/c/linux/kernel/git/torvalds/linux/+/1524 This patch (of 3): Add background thread coverage collection ability to kcov. With KCOV_ENABLE coverage is collected only for syscalls that are issued from the current process. With KCOV_REMOTE_ENABLE it's possible to collect coverage for arbitrary parts of the kernel code, provided that those parts are annotated with kcov_remote_start()/kcov_remote_stop(). This allows to collect coverage from two types of kernel background threads: the global ones, that are spawned during kernel boot in a limited number of instances (e.g. one USB hub_event() worker thread is spawned per USB HCD); and the local ones, that are spawned when a user interacts with some kernel interface (e.g. vhost workers). To enable collecting coverage from a global background thread, a unique global handle must be assigned and passed to the corresponding kcov_remote_start() call. Then a userspace process can pass a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the kcov_remote_arg struct. This will attach the used kcov device to the code sections, that are referenced by those handles. Since there might be many local background threads spawned from different userspace processes, we can't use a single global handle per annotation. Instead, the userspace process passes a non-zero handle through the common_handle field of the kcov_remote_arg struct. This common handle gets saved to the kcov_handle field in the current task_struct and needs to be passed to the newly spawned threads via custom annotations. Those threads should in turn be annotated with kcov_remote_start()/kcov_remote_stop(). Internally kcov stores handles as u64 integers. The top byte of a handle is used to denote the id of a subsystem that this handle belongs to, and the lower 4 bytes are used to denote the id of a thread instance within that subsystem. A reserved value 0 is used as a subsystem id for common handles as they don't belong to a particular subsystem. The bytes 4-7 are currently reserved and must be zero. In the future the number of bytes used for the subsystem or handle ids might be increased. When a particular userspace process collects coverage by via a common handle, kcov will collect coverage for each code section that is annotated to use the common handle obtained as kcov_handle from the current task_struct. However non common handles allow to collect coverage selectively from different subsystems. Link: http://lkml.kernel.org/r/e90e315426a384207edbec1d6aa89e43008e4caf.1572366574.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Windsor <dwindsor@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addrHuang Shijie
Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04kernel/sys.c: avoid copying possible padding bytes in copy_to_userJoe Perches
Initialization is not guaranteed to zero padding bytes so use an explicit memset instead to avoid leaking any kernel content in any possible padding bytes. Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04kernel/profile.c: use cpumask_available to check for NULL cpumaskNathan Chancellor
When building with clang + -Wtautological-pointer-compare, these instances pop up: kernel/profile.c:339:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare] if (prof_cpu_mask != NULL) ^~~~~~~~~~~~~ ~~~~ kernel/profile.c:376:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare] if (prof_cpu_mask != NULL) ^~~~~~~~~~~~~ ~~~~ kernel/profile.c:406:26: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare] if (!user_mode(regs) && prof_cpu_mask != NULL && ^~~~~~~~~~~~~ ~~~~ 3 warnings generated. This can be addressed with the cpumask_available helper, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()") to fix warnings like this while keeping the code the same. Link: https://github.com/ClangBuiltLinux/linux/issues/747 Link: http://lkml.kernel.org/r/20191022191957.9554-1-natechancellor@gmail.com Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04kernel/notifier.c: remove blocking_notifier_chain_cond_register()Xiaoming Ni
blocking_notifier_chain_cond_register() does not consider system_booting state, which is the only difference between this function and blocking_notifier_cain_register(). This can be a bug and is a piece of duplicate code. Delete blocking_notifier_chain_cond_register() Link: http://lkml.kernel.org/r/1568861888-34045-4-git-send-email-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04kernel/notifier.c: remove notifier_chain_cond_register()Xiaoming Ni
The only difference between notifier_chain_cond_register() and notifier_chain_register() is the lack of warning hints for duplicate registrations. Use notifier_chain_register() instead of notifier_chain_cond_register() to avoid duplicate code Link: http://lkml.kernel.org/r/1568861888-34045-3-git-send-email-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04kernel/notifier.c: intercept duplicate registrations to avoid infinite loopsXiaoming Ni
Registering the same notifier to a hook repeatedly can cause the hook list to form a ring or lose other members of the list. case1: An infinite loop in notifier_chain_register() can cause soft lockup atomic_notifier_chain_register(&test_notifier_list, &test1); atomic_notifier_chain_register(&test_notifier_list, &test1); atomic_notifier_chain_register(&test_notifier_list, &test2); case2: An infinite loop in notifier_chain_register() can cause soft lockup atomic_notifier_chain_register(&test_notifier_list, &test1); atomic_notifier_chain_register(&test_notifier_list, &test1); atomic_notifier_call_chain(&test_notifier_list, 0, NULL); case3: lose other hook test2 atomic_notifier_chain_register(&test_notifier_list, &test1); atomic_notifier_chain_register(&test_notifier_list, &test2); atomic_notifier_chain_register(&test_notifier_list, &test1); case4: Unregister returns 0, but the hook is still in the linked list, and it is not really registered. If you call notifier_call_chain after ko is unloaded, it will trigger oops. If the system is configured with softlockup_panic and the same hook is repeatedly registered on the panic_notifier_list, it will cause a loop panic. Add a check in notifier_chain_register(), intercepting duplicate registrations to avoid infinite loops Link: http://lkml.kernel.org/r/1568861888-34045-2-git-send-email-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jeff Layton <jlayton@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04Merge tag 'trace-v5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: "Two fixes and one patch that was missed: Fixes: - Missing __print_hex_dump undef for processing new function in trace events - Stop WARN_ON messages when lockdown disables tracing on boot up Enhancement: - Debug option to inject trace events from userspace (for rasdaemon)" The enhancement has its own config option and is non invasive. It's been discussed for sever months and should have been added to my original push, but I never pulled it into my queue. * tag 'trace-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not create directories if lockdown is in affect tracing: Introduce trace event injection tracing: Fix __print_hex_dump scope
2019-12-04Merge tag 'pm-5.5-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional power management updates from Rafael Wysocki: "These fix an ACPI EC driver bug exposed by the recent rework of the suspend-to-idle code flow, reintroduce frequency constraints into device PM QoS (in preparation for adding QoS support to devfreq), drop a redundant field from struct cpuidle_state and clean up Kconfig in some places. Specifics: - Avoid a race condition in the ACPI EC driver that may cause systems to be unable to leave suspend-to-idle (Rafael Wysocki) - Drop the "disabled" field, which is redundant, from struct cpuidle_state (Rafael Wysocki) - Reintroduce device PM QoS frequency constraints (temporarily introduced and than dropped during the 5.4 cycle) in preparation for adding QoS support to devfreq (Leonard Crestez) - Clean up indentation (in multiple places) and the cpuidle drivers help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap)" * tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Rework ACPI events synchronization ACPI: EC: Rework flushing of pending work PM / devfreq: Add missing locking while setting suspend_freq PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs PM / QoS: Initial kunit test PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX power: avs: Fix Kconfig indentation cpufreq: Fix Kconfig indentation cpuidle: minor Kconfig help text fixes cpuidle: Drop disabled field from struct cpuidle_state cpuidle: Fix Kconfig indentation
2019-12-04tracing: Do not create directories if lockdown is in affectSteven Rostedt (VMware)
If lockdown is disabling tracing on boot up, it prevents the tracing files from even bering created. But when that happens, there's several places that will give a warning that the files were not created as that is usually a sign of a bug. Add in strategic locations where a check is made to see if tracing is disabled by lockdown, and if it is, do not go further, and fail silently (but print that tracing is disabled by lockdown, without doing a WARN_ON()). Cc: Matthew Garrett <mjg59@google.com> Fixes: 17911ff38aa5 ("tracing: Add locked_down checks to the open calls of files created for tracefs") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "The main changes in the timer code in this cycle were: - Clockevent updates: - timer-of framework cleanups. (Geert Uytterhoeven) - Use timer-of for the renesas-ostm and the device name to prevent name collision in case of multiple timers. (Geert Uytterhoeven) - Check if there is an error after calling of_clk_get in asm9260 (Chuhong Yuan) - ABI fix: Zero out high order bits of nanoseconds on compat syscalls. This got broken a year ago, with apparently no side effects so far. Since the kernel would use random data otherwise I don't think we'd have other options but to fix the bug, even if there was a side effect to applications (Dmitry Safonov) - Optimize ns_to_timespec64() on 32-bit systems: move away from div_s64_rem() which can be slow, to div_u64_rem() which is faster (Arnd Bergmann) - Annotate KCSAN-reported false positive data races in hrtimer_is_queued() users by moving timer->state handling over to the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses (Eric Dumazet) - Misc cleanups and small fixes" [ I undid the "ABI fix" and updated the comments instead. The reason there were apparently no side effects is that the fix was a no-op. The updated comment is to say _why_ it was a no-op. - Linus ] * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Zero the upper 32-bits in __kernel_timespec on 32-bit time: Rename tsk->real_start_time to ->start_boottime hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ time: Fix spelling mistake in comment time: Optimize ns_to_timespec64() hrtimer: Annotate lockless access to timer->state clocksource/drivers/asm9260: Add a check for of_clk_get clocksource/drivers/renesas-ostm: Use unique device name instead of ostm clocksource/drivers/renesas-ostm: Convert to timer_of clocksource/drivers/timer-of: Use unique device name instead of timer clocksource/drivers/timer-of: Convert last full_name to %pOF
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
2019-12-02Merge tag 'kbuild-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-02 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 6 day(s) which contain a total of 10 files changed, 60 insertions(+), 51 deletions(-). The main changes are: 1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev. 2) Fix libbpf global variable relocation to take symbol's st_value offset into account, from Andrii Nakryiko. 3) Fix libbpf build on powerpc where check_abi target fails due to different readelf output format, from Aurelien Jarno. 4) Don't set BPF insns RO for the case when they are JITed in order to avoid fragmenting the direct map, from Daniel Borkmann. 5) Fix static checker warning in btf_distill_func_proto() as well as a build error due to empty enum when BPF is compiled out, from Alexei Starovoitov. 6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 12:44:00 +0000