aboutsummaryrefslogtreecommitdiff
path: root/kernel/auditfilter.c
AgeCommit message (Collapse)Author
2009-01-04audit: validate comparison operations, store them in sane formAl Viro
Don't store the field->op in the messy (and very inconvenient for e.g. audit_comparator()) form; translate to dense set of values and do full validation of userland-submitted value while we are at it. ->audit_init_rule() and ->audit_match_rule() get new values now; in-tree instances updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04clean up audit_rule_{add,del} a bitAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04audit rules ordering, part 2Al Viro
Fix the actual rule listing; add per-type lists _not_ used for matching, with all exit,... sitting on one such list. Simplifies "do something for all rules" logics, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04fixing audit rule ordering mess, part 1Al Viro
Problem: ordering between the rules on exit chain is currently lost; all watch and inode rules are listed after everything else _and_ exit,never on one kind doesn't stop exit,always on another from being matched. Solution: assign priorities to rules, keep track of the current highest-priority matching rule and its result (always/never). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04audit_update_lsm_rules() misses the audit_inode_hash[] onesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-11-15Fix inotify watch removal/umount racesAl Viro
Inotify watch removals suck violently. To kick the watch out we need (in this order) inode->inotify_mutex and ih->mutex. That's fine if we have a hold on inode; however, for all other cases we need to make damn sure we don't race with umount. We can *NOT* just grab a reference to a watch - inotify_unmount_inodes() will happily sail past it and we'll end with reference to inode potentially outliving its superblock. Ideally we just want to grab an active reference to superblock if we can; that will make sure we won't go into inotify_umount_inodes() until we are done. Cleanup is just deactivate_super(). However, that leaves a messy case - what if we *are* racing with umount() and active references to superblock can't be acquired anymore? We can bump ->s_count, grab ->s_umount, which will almost certainly wait until the superblock is shut down and the watch in question is pining for fjords. That's fine, but there is a problem - we might have hit the window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock is past the point of no return and is heading for shutdown) and the moment when deactivate_super() acquires ->s_umount. We could just do drop_super() yield() and retry, but that's rather antisocial and this stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having found that we'd got there first (i.e. that ->s_root is non-NULL) we know that we won't race with inotify_umount_inodes(). So we could grab a reference to watch and do the rest as above, just with drop_super() instead of deactivate_super(), right? Wrong. We had to drop ih->mutex before we could grab ->s_umount. So the watch could've been gone already. That still can be dealt with - we need to save watch->wd, do idr_find() and compare its result with our pointer. If they match, we either have the damn thing still alive or we'd lost not one but two races at once, the watch had been killed and a new one got created with the same ->wd at the same address. That couldn't have happened in inotify_destroy(), but inotify_rm_wd() could run into that. Still, "new one got created" is not a problem - we have every right to kill it or leave it alone, whatever's more convenient. So we can use idr_find(...) == watch && watch->inode->i_sb == sb as "grab it and kill it" check. If it's been our original watch, we are fine, if it's a newcomer - nevermind, just pretend that we'd won the race and kill the fscker anyway; we are safe since we know that its superblock won't be going away. And yes, this is far beyond mere "not very pretty"; so's the entire concept of inotify to start with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE ↵zhangxiliang
audit messages > shouldn't these be using the "audit_get_loginuid(current)" and if we > are going to output loginuid we also should be outputting sessionid Thanks for your detailed explanation. I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current). If there are some deficiencies, please give me your indication. Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-24[PATCH] remove useless argument type in audit_filter_user()Peng Haitao
The second argument "type" is not used in audit_filter_user(), so I think that type can be removed. If I'm wrong, please tell me. Signed-off-by: Peng Haitao <penght@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-24[PATCH] audit: fix kernel-doc parameter notationRandy Dunlap
Fix auditfilter kernel-doc misssing parameter description: Warning(lin2626-rc3//kernel/auditfilter.c:1551): No description found for parameter 'sessionid' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-29Merge branch 'audit.b50' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current * 'audit.b50' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] new predicate - AUDIT_FILETYPE [patch 2/2] Use find_task_by_vpid in audit code [patch 1/2] audit: let userspace fully control TTY input auditing [PATCH 2/2] audit: fix sparse shadowed variable warnings [PATCH 1/2] audit: move extern declarations to audit.h Audit: MAINTAINERS update Audit: increase the maximum length of the key field Audit: standardize string audit interfaces Audit: stop deadlock from signals under load Audit: save audit_backlog_limit audit messages in case auditd comes back Audit: collect sessionid in netlink messages Audit: end printk with newline
2008-04-29Remove duplicated unlikely() in IS_ERR()Hirofumi Nakagawa
Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless code. Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28[PATCH] new predicate - AUDIT_FILETYPEAl Viro
Argument is S_IF... | <index>, where index is normally 0 or 1. Triggers if chosen element of ctx->names[] is present and the mode of object in question matches the upper bits of argument. I.e. for things like "is the argument of that chmod a directory", etc. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28[PATCH 2/2] audit: fix sparse shadowed variable warningsHarvey Harrison
Use msglen as the identifier. kernel/audit.c:724:10: warning: symbol 'len' shadows an earlier one kernel/audit.c:575:8: originally declared here Don't use ino_f to check the inode field at the end of the functions. kernel/auditfilter.c:429:22: warning: symbol 'f' shadows an earlier one kernel/auditfilter.c:420:21: originally declared here kernel/auditfilter.c:542:22: warning: symbol 'f' shadows an earlier one kernel/auditfilter.c:529:21: originally declared here i always used as a counter for a for loop and initialized to zero before use. Eliminate the inner i variables. kernel/auditsc.c:1295:8: warning: symbol 'i' shadows an earlier one kernel/auditsc.c:1152:6: originally declared here kernel/auditsc.c:1320:7: warning: symbol 'i' shadows an earlier one kernel/auditsc.c:1152:6: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28[PATCH 1/2] audit: move extern declarations to audit.hHarvey Harrison
Leave audit_sig_{uid|pid|sid} protected by #ifdef CONFIG_AUDITSYSCALL. Noticed by sparse: kernel/audit.c:73:6: warning: symbol 'audit_ever_enabled' was not declared. Should it be static? kernel/audit.c:100:8: warning: symbol 'audit_sig_uid' was not declared. Should it be static? kernel/audit.c:101:8: warning: symbol 'audit_sig_pid' was not declared. Should it be static? kernel/audit.c:102:6: warning: symbol 'audit_sig_sid' was not declared. Should it be static? kernel/audit.c:117:23: warning: symbol 'audit_ih' was not declared. Should it be static? kernel/auditfilter.c:78:18: warning: symbol 'audit_filter_list' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28Audit: collect sessionid in netlink messagesEric Paris
Previously I added sessionid output to all audit messages where it was available but we still didn't know the sessionid of the sender of netlink messages. This patch adds that information to netlink messages so we can audit who sent netlink messages. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-19Audit: Final renamings and cleanupAhmed S. Darwish
Rename the se_str and se_rule audit fields elements to lsm_str and lsm_rule to avoid confusion. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: James Morris <jmorris@namei.org>
2008-04-19Audit: internally use the new LSM audit hooksAhmed S. Darwish
Convert Audit to use the new LSM Audit hooks instead of the exported SELinux interface. Basically, use: security_audit_rule_init secuirty_audit_rule_free security_audit_rule_known security_audit_rule_match instad of (respectively) : selinux_audit_rule_init selinux_audit_rule_free audit_rule_has_selinux selinux_audit_rule_match Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: James Morris <jmorris@namei.org>
2008-04-19Audit: use new LSM hooks instead of SELinux exportsAhmed S. Darwish
Stop using the following exported SELinux interfaces: selinux_get_inode_sid(inode, sid) selinux_get_ipc_sid(ipcp, sid) selinux_get_task_sid(tsk, sid) selinux_sid_to_string(sid, ctx, len) kfree(ctx) and use following generic LSM equivalents respectively: security_inode_getsecid(inode, secid) security_ipc_getsecid*(ipcp, secid) security_task_getsecid(tsk, secid) security_sid_to_secctx(sid, ctx, len) security_release_secctx(ctx, len) Call security_release_secctx only if security_secid_to_secctx succeeded. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: James Morris <jmorris@namei.org> Reviewed-by: Paul Moore <paul.moore@hp.com>
2008-02-14Introduce path_put()Jan Blunck
* Add path_put() functions for releasing a reference to the dentry and vfsmount of a struct path in the right order * Switch from path_release(nd) to path_put(&nd->path) * Rename dput_path() to path_put_conditional() [akpm@linux-foundation.org: fix cifs] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: <linux-fsdevel@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Embed a struct path into struct nameidata instead of nd->{dentry,mnt}Jan Blunck
This is the central patch of a cleanup series. In most cases there is no good reason why someone would want to use a dentry for itself. This series reflects that fact and embeds a struct path into nameidata. Together with the other patches of this series - it enforced the correct order of getting/releasing the reference count on <dentry,vfsmount> pairs - it prepares the VFS for stacking support since it is essential to have a struct path in every place where the stack can be traversed - it reduces the overall code size: without patch series: text data bss dec hex filename 5321639 858418 715768 6895825 6938d1 vmlinux with patch series: text data bss dec hex filename 5320026 858418 715768 6894212 693284 vmlinux This patch: Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix cifs] [akpm@linux-foundation.org: fix smack] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01[AUDIT] make audit=0 really stop audit messagesEric Paris
Some audit messages (namely configuration changes) are still emitted even if the audit subsystem has been explicitly disabled. This patch turns those messages off as well. Signed-off-by: Eric Paris <eparis@redhat.com>
2007-10-21[PATCH] audit: watching subtreesAl Viro
New kind of audit rule predicates: "object is visible in given subtree". The part that can be sanely implemented, that is. Limitations: * if you have hardlink from outside of tree, you'd better watch it too (or just watch the object itself, obviously) * if you mount something under a watched tree, tell audit that new chunk should be added to watched subtrees * if you umount something in a watched tree and it's still mounted elsewhere, you will get matches on events happening there. New command tells audit to recalculate the trees, trimming such sources of false positives. Note that it's _not_ about path - if something mounted in several places (multiple mount, bindings, different namespaces, etc.), the match does _not_ depend on which one we are using for access. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-10-18whitespace fixes: audit filteringDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22[PATCH] allow audit filtering on bit & operationsEric Paris
Right now the audit filter can match on = != > < >= blah blah blah. This allow the filter to also look at bitwise AND operations, & Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-07-22[PATCH] audit: fix broken class-based syscall auditKlaus Weidner
The sanity check in audit_match_class() is wrong. We are able to audit 2048 syscalls but in audit_match_class() we were accidentally using sizeof(_u32) instead of number of bits in _u32 when deciding how many syscalls were valid. On ia64 in particular we were hitting syscall numbers over the (wrong) limit of 256. Fixing the audit_match_class check takes care of the problem. Signed-off-by: Klaus Weidner <klaus@atsec.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-07-17kernel/auditfilter: kill bogus uninit'd-var compiler warningJeff Garzik
Kill this warning... kernel/auditfilter.c: In function ‘audit_receive_filter’: kernel/auditfilter.c:1213: warning: ‘ndw’ may be used uninitialized in this function kernel/auditfilter.c:1213: warning: ‘ndp’ may be used uninitialized in this function ...with a simplification of the code. audit_put_nd() can accept NULL arguments, just like kfree(). It is cleaner to init two existing vars to NULL, remove the redundant test variable 'putnd_needed' branches, and call audit_put_nd() directly. As a desired side effect, the warning goes away. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-24audit: fix oops removing watch if audit disabledTony Jones
Removing a watched file will oops if audit is disabled (auditctl -e 0). To reproduce: - auditctl -e 1 - touch /tmp/foo - auditctl -w /tmp/foo - auditctl -e 0 - rm /tmp/foo (or mv) Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15audit_match_signal() and friends are used only if CONFIG_AUDITSYSCALL is setAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11[PATCH] audit signal recipientsAmy Griffis
When auditing syscalls that send signals, log the pid and security context for each target process. Optimize the data collection by adding a counter for signal-related rules, and avoiding allocating an aux struct unless we have more than one target process. For process groups, collect pid/context data in blocks of 16. Move the audit_signal_info() hook up in check_kill_permission() so we audit attempts where permission is denied. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-02-17[PATCH] minor update to rule add/delete messages (ver 2)Steve Grubb
I was looking at parsing some of these messages and found that I wanted what it was doing next to an op= for the parser to key on. Also missing was the list number and results. Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-02-11[PATCH] audit: fix audit_filter_user_rules() initialization bugIngo Molnar
gcc emits this warning: kernel/auditfilter.c: In function 'audit_filter_user': kernel/auditfilter.c:1611: warning: 'state' is used uninitialized in this function I tend to agree with gcc - there are a couple of plausible exit paths from audit_filter_user_rules() where it does not set 'state', keeping the variable uninitialized. For example if a filter rule has an AUDIT_POSSIBLE action. Initialize to 'wont audit'. Fix whitespace damage too. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-22[PATCH] audit: fix kstrdup() error checkAkinobu Mita
kstrdup() returns NULL on error. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] kernel core: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] arch filter lists with < or > should not be acceptedEric Paris
Currently the kernel audit system represents arch's as numbers and will gladly accept comparisons between archs using >, <, >=, <= when the only thing that makes sense is = or !=. I'm told that the next revision of auditctl will do this checking but this will provide enforcement in the kernel even for old userspace. A simple command to show the issue would be to run auditctl -d entry,always -F arch>i686 -S chmod with this patch the kernel will reject this with -EINVAL Please comment/ack/nak as soon as possible. -Eric kernel/auditfilter.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-09-26[PATCH] selinux: rename selinux_ctxid_to_stringStephen Smalley
Rename selinux_ctxid_to_string to selinux_sid_to_string to be consistent with other interfaces. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-11[PATCH] audit: AUDIT_PERM supportAl Viro
add support for AUDIT_PERM predicate Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-09-11[PATCH] update audit rule change messagesAmy Griffis
Make the audit message for implicit rule removal more informative. Make the rule update message consistent with other messages. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-09-11[PATCH] fix ppid bug in 2.6.18 kernelSteve Grubb
Hello, During some troubleshooting, I found that ppid was accidentally omitted from the legacy rule section. This resulted in EINVAL for any rule with ppid sent with AUDIT_ADD. Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-08-03[PATCH] introduce audit rules counterAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-08-03[PATCH] fix audit oops with invalid operatorAmy Griffis
Michael C Thompson wrote: [Tue Aug 01 2006, 02:36:36PM EDT] > The trigger for this oops is: > # auditctl -a exit,always -S pread64 -F 'inode<1' Setting the err value will fix it. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-07-01[PATCH] audit syscall classesAl Viro
Allow to tie upper bits of syscall bitmap in audit rules to kernel-defined sets of syscalls. Infrastructure, a couple of classes (with 32bit counterparts for biarch targets) and actual tie-in on i386, amd64 and ia64. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-07-01[PATCH] audit: support for object context filtersDarrel Goeddel
This patch introduces object audit filters based on the elements of the SELinux context. Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> kernel/auditfilter.c | 25 +++++++++++++++++++++++++ kernel/auditsc.c | 40 ++++++++++++++++++++++++++++++++++++++++ security/selinux/ss/services.c | 18 +++++++++++++++++- 3 files changed, 82 insertions(+), 1 deletion(-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-07-01[PATCH] audit: rename AUDIT_SE_* constantsDarrel Goeddel
This patch renames some audit constant definitions and adds additional definitions used by the following patch. The renaming avoids ambiguity with respect to the new definitions. Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com> include/linux/audit.h | 15 ++++++++---- kernel/auditfilter.c | 50 ++++++++++++++++++++--------------------- kernel/auditsc.c | 10 ++++---- security/selinux/ss/services.c | 32 +++++++++++++------------- 4 files changed, 56 insertions(+), 51 deletions(-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-07-01[PATCH] add rule filterkeyAmy Griffis
Add support for a rule key, which can be used to tie audit records to audit rules. This is useful when a watched file is accessed through a link or symlink, as well as for general audit log analysis. Because this patch uses a string key instead of an integer key, there is a bit of extra overhead to do the kstrdup() when a rule fires. However, we're also allocating memory for the audit record buffer, so it's probably not that significant. I went ahead with a string key because it seems more user-friendly. Note that the user must ensure that filterkeys are unique. The kernel only checks for duplicate rules. Signed-off-by: Amy Griffis <amy.griffis@hpd.com>
2006-06-20[PATCH] log more info for directory entry change eventsAmy Griffis
When an audit event involves changes to a directory entry, include a PATH record for the directory itself. A few other notable changes: - fixed audit_inode_child() hooks in fsnotify_move() - removed unused flags arg from audit_inode() - added audit log routines for logging a portion of a string Here's some sample output. before patch: type=SYSCALL msg=audit(1149821605.320:26): arch=40000003 syscall=39 success=yes exit=0 a0=bf8d3c7c a1=1ff a2=804e1b8 a3=bf8d3c7c items=1 ppid=739 pid=800 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255 type=CWD msg=audit(1149821605.320:26): cwd="/root" type=PATH msg=audit(1149821605.320:26): item=0 name="foo" parent=164068 inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0 after patch: type=SYSCALL msg=audit(1149822032.332:24): arch=40000003 syscall=39 success=yes exit=0 a0=bfdd9c7c a1=1ff a2=804e1b8 a3=bfdd9c7c items=2 ppid=714 pid=777 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255 type=CWD msg=audit(1149822032.332:24): cwd="/root" type=PATH msg=audit(1149822032.332:24): item=0 name="/root" inode=164068 dev=03:00 mode=040750 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_dir_t:s0 type=PATH msg=audit(1149822032.332:24): item=1 name="foo" inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0 Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20[PATCH] fix AUDIT_FILTER_PREPEND handlingAmy Griffis
Clear AUDIT_FILTER_PREPEND flag after adding rule to list. This fixes three problems when a rule is added with the -A syntax: - auditctl displays filter list as "(null)" - the rule cannot be removed using -d - a duplicate rule can be added with -a Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20[PATCH] validate rule fields' typesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20[PATCH] audit: path-based rulesAmy Griffis
In this implementation, audit registers inotify watches on the parent directories of paths specified in audit rules. When audit's inotify event handler is called, it updates any affected rules based on the filesystem event. If the parent directory is renamed, removed, or its filesystem is unmounted, audit removes all rules referencing that inotify watch. To keep things simple, this implementation limits location-based auditing to the directory entries in an existing directory. Given a path-based rule for /foo/bar/passwd, the following table applies: passwd modified -- audit event logged passwd replaced -- audit event logged, rules list updated bar renamed -- rule removed foo renamed -- untracked, meaning that the rule now applies to the new location Audit users typically want to have many rules referencing filesystem objects, which can significantly impact filtering performance. This patch also adds an inode-number-based rule hash to mitigate this situation. The patch is relative to the audit git tree: http://kernel.org/git/?p=linux/kernel/git/viro/audit-current.git;a=summary and uses the inotify kernel API: http://lkml.org/lkml/2006/6/1/145 Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20[PATCH] deprecate AUDIT_POSSBILEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20[PATCH] fix audit_krule_to_{rule,data} return valuesAmy Griffis
Don't return -ENOMEM when callers of these functions are checking for a NULL return. Bug noticed by Serge Hallyn. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>