aboutsummaryrefslogtreecommitdiff
path: root/include/linux/mmc
AgeCommit message (Collapse)Author
2014-05-22mmc: sdhci: track whether preset mode is currently enabled in hardwareRussell King
Track whether preset mode is currently enabled in hardware, and use that when making decisions elsewhere in the code rather than reading the register and checking the bit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: cache timing information locallyRussell King
Rather than reading back the timing information from the registers, cache it locally. This allows implementations to translate the UHS timing by overriding the set_uhs_signaling() method as required without also having to emulate the SDHCI_HOST_CONTROL2 register. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert sdhci_set_clock() into a library functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: move FSL ESDHC reset handling quirk into esdhc codeRussell King
The Freescale esdhc driver is the only driver which needs the interrupt registers restored after a reset. Move this quirk to be part of the ESDHC driver implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: more efficient interrupt enable register handlingRussell King
Rather than wasting cycles read-modify-writing the interrupt enable registers, cache the value locally instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: push card_tasklet into threaded irq handlerRussell King
There's no requirement to have the card tasklet separate now that we have a threaded interrupt handler, so kill this and move the called code into the threaded part of the handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdhci: convert to new SDIO IRQ handlingRussell King
Use a generic threaded interrupt handler for SDIO interrupt handling, rather than allowing the SDIO core code to buggily spawn its own thread. This results in host drivers to be more in control of how SDIO interrupts are acknowledged in the hardware, rather than having the internals of the SDIO core placed upon them, possibly resulting in sub-standard handling. At least one SDHCI implementation specifies a very specific sequence to deal with a card interrupt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-22mmc: sdio_irq: rework sdio irq handlingRussell King
Rather than the SDIO support spawning it's own thread for handling card interrupts, use the generic IRQ infrastructure for this, triggering it from the host interface's interrupt handling directly. This avoids a race between the parent thread waiting to receive an interrupt response from the card, and the slow startup from the sdio irq thread, which can occur as a result of high system load (eg, while udev is running.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Stephen Warren <swarren@nvidia.com> [Ulf Hansson] Resolved conflict Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: core: Improve support for deferred regulatorsTim Kryger
Callers of mmc_regulator_get_supply could benefit from knowing if either of the regulators are present but not yet available. Since callers do not currently examine the return value, modify this function to return zero or -EPROBE_DEFER if either regulator get returns the same. Furthermore, since callers check vmmc/vqmmc using IS_ERR and can deal with absent regulators, switch to devm_regulator_get_optional. This has the added benefit of allowing this function to behave correctly even in the !CONFIG_REGULATOR case such that the stub can be removed. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: add support for HS400 mode of eMMC5.0Seungwon Jeon
This patch adds HS400 mode support for eMMC5.0 device. HS400 mode is high speed DDR interface timing from HS200. Clock frequency is up to 200MHz and only 8-bit bus width is supported. In addition, tuning process of HS200 is required to synchronize the command response on the CMD line because CMD input timing for HS400 mode is the same as HS200 mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Jackey Shen <jackey.shen@amd.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: rework selection of bus speed modeSeungwon Jeon
Current implementation for bus speed mode selection is too complicated. This patch is to simplify the codes and remove some duplicate parts. The following changes are including: * Adds functions for each mode selection(HS, HS-DDR, HS200 and etc) * Rearranged the mode selection sequence with supported device type * Adds maximum speed for HS200 mode(hs200_max_dtr) * Adds field definition for HS_TIMING of EXT_CSD Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: identify available device type to selectSeungwon Jeon
Device types which are supported by both host and device can be identified when EXT_CSD is read. There is no need to check host's capability anymore. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: drop the speed mode of card's stateSeungwon Jeon
Timing mode identifier has same role and can take the place of speed mode. This change removes all related speed mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: dw_mmc: remove unused member variable.Jaehoon Chung
Since using the device-tree, didn't use the callback pointer. So removed the unused callback pointer. When the set_power callback is used, it should be added in future. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: card.h: Use NULL instead of 0 for END_FIXUPFabio Estevam
Fix the following sparse warnings: drivers/mmc/card/block.c:2421:9: warning: Using plain integer as NULL pointer drivers/mmc/core/quirks.c:69:9: warning: Using plain integer as NULL pointer Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: Delay the card_event callback into the mmc_rescan workerMarkus Mayer
This change removes the callback from atomic context which it doesn't need to be in, and puts it in line with the debounced rescan. This code is based on these e-mail threads with Christian Daudt: https://lkml.org/lkml/2013/8/19/539 https://lkml.org/lkml/2014/3/19/79 Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
This change distinguishes DDR timing mode of current mixed usage to clarify device type. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-03-17brcmfmac: add BCM4354 SDIO interface supportFranky Lin
BCM4354 is an a/b/g/n/ac 2x2 WiFi chip. This patch adds support for it through SDIO interface. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17mmc: slot-gpio: Add GPIO descriptor based CD GPIO APIAdrian Hunter
Add functions to request a CD GPIO using the GPIO descriptor API. Note that the new request function is paired with mmc_gpiod_free_cd() not mmc_gpio_free_cd(). Note also that it must be called prior to mmc_add_host() otherwise the caller must also call mmc_gpiod_request_cd_irq(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: sdhci-spear: remove support for power gpioRussell King
None of this code is currently used: there are no definitions of struct sdhci_plat_data in arch/arm, neither are there any DT properties which use card_power_gpio/power_active_high/power_always_enb. In any case, slot power control should be rigged up via vmmc and the regulator subsystem in the DT case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Add ignore_crc flag to __mmc_switchUlf Hansson
Instead of handle specific adaptations, releated to certain switch operations, inside __mmc_switch, push this to be handled by the caller instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Rename cmd_timeout_ms to busy_timeoutUlf Hansson
To better reflect that the cmd_timeout_ms is directly related to the busy detection timeout, let's rename it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Rename max_discard_to to max_busy_timeoutUlf Hansson
Rename host->max_discard_to to host->max_busy_timeout, to reflect that it tells the mmc core layer about the maximum supported busy detection timeout by the host. This timeout is at the moment only applicable to erase/trim/discard commands. By the renaming we provide the option of make use of it for other commands that cares about busy detection. In other words, those commands that wants an R1B response, like for example the mmc switch command. Do note that the max_busy_timeout is supposed to be specified only by hosts supporting MMC_CAP_WAIT_WHILE_BUSY. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhci: add support for realtek rts5250Micky Ching
Add support for realtek rts5250 pci card reader. The card reader has some problems with DDR50 mode, so add a new quirks2 for broken ddr50. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-13mmc: core: Enable MMC_CAP2_CACHE_CTRL as defaultUlf Hansson
There are no reason to why the use of a non-volatile internal eMMC cache should be controlled by a host cap. Instead let's just enable it if the eMMC card supports it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-13mmc: core: Use mmc_flush_cache() during mmc suspendUlf Hansson
Earlier we disabled the cache during suspend, which meant a flush was internally at the eMMC performed as well. To simplify code we can make use of the mmc_flush_cache(), during mmc suspend, which makes the mmc_cache_ctrl() redundant so then we can remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-13mmc: core: Remove support for MMC_CAP2_NO_SLEEP_CMDUlf Hansson
There are no active users of this host capability. The primary reason for adding this cap was due to a bug in ux500 boot loader code, which is not a relevant issue any more. So, let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-13mmc: core: Remove unused host cap MMC_CAP2_BROKEN_VOLTAGEUlf Hansson
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-13mmc: card: Remove host cap MMC_CAP2_SANITIZEUlf Hansson
There is no need for keeping a host cap for MMC_CAP2_SANITIZE, instead we just make the feature default available. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-13mmc: core: Use MMC_UNSAFE_RESUME as default behaviorUlf Hansson
Invoking system suspend or shutdown without using the Kconfig option MMC_UNSAFE_RESUME, did trigger an ungraceful power cut of the card. To improve the situation, change the behavior to always make use of the available bus_ops callbacks that handles system suspend and shutdown properly. By changing the behavior MMC_UNSAFE_RESUME becomes redundant, so lets's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-01-26Merge tag 'mmc-updates-for-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.14: Core: - Avoid get_cd() on cards marked nonremovable Drivers: - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC - dwmmc: Support Hisilicon K3 SoC controllers - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540 - tegra: Support Tegra124 SoCs" * tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits) mmc: sdhci-pci: Fix possibility of chip->fixes being null mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend mmc: sdhci: Allow for long command timeouts mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling mmc: sdhci: fix lockdep error in tuning routine mmc: dw_mmc: k3: remove clk_table mmc: dw_mmc: fix dw_mci_get_cd mmc: dw_mmc: fix sparse non static symbol warning mmc: sdhci-esdhc-imx: fix warning during module remove function mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context mmc: core: sd: implement proper support for sd3.0 au sizes mmc: atmel-mci: add vmmc-supply support mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield mmc: sdhci: add quirk for broken HS200 support mmc: arasan: Add driver for Arasan SDHCI mmc: dw_mmc: add dw_mmc-k3 for k3 platform mmc: dw_mmc: use slot-gpio to handle cd pin mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts mmc: sdhci-pci: break out definitions to header file mmc: tmio: fixup compile error ... Conflicts: MAINTAINERS
2014-01-17mmc: sdio: add a quirk for broken SDIO_CCCR_INTx pollingBing Zhao
Polling SDIO_CCCR_INTx could create a fake interrupt with Marvell SD8797 card. Add a quirk to handle this case. The fixup here is to issue a dummy CMD52 read to function 0 register 0xff, and this dummy read must be right after SDIO_CCCR_INTx is read. Patch has been verified on a dw_mmc controller (Samsung Chromebook) with MMC_CAP_SDIO_IRQ disabled. Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13mmc: sdhci: add quirk for broken HS200 supportDavid Cohen
This patch defines a quirk for platforms unable to enable HS200 support. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Acked-by: Dong Aisheng <b29396@freescale.com> Cc: stable <stable@vger.kernel.org> # [3.13] Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13mmc: SDHI: add SoC specific workaround via HW versionKuninori Morimoto
One of Renesas SDHI chip needs workaround to use it, and, we can judge it based on chip version. This patch adds very quick-hack workaround method, since we still don't know how many chips need workaround in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-06mmc: add SDIO identifiers for Broadcom WLAN devicesArend van Spriel
The SDIO identifier for Broadcom WLAN devices were defined in the brcmfmac SDIO driver. Moving the definitions in MMC header file seems common sense. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-30mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resumeUlf Hansson
In some environments it is to prefer to postpone the resume of the card device until runtime_resume is being carried out, since it will mean a signficant decrease of the total system resume time. The reason of the decreased resume time is simply because of the actual re-initalization of the card, which typically takes hundreds of milliseconds, is performed outside the resume sequence and wont thus affect it. For removable card, the detect work tries to re-detect the card to make sure it is still present, as a part of that sequence the card will also be runtime_resumed and thus also fully resumed. For a non-removable card, typically a mmc blk request will trigger a runtime_resume and thus fully resume the card. This also means the first request will likely suffer from an inital latency since the re-initialization of the card needs to be performed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: Don't force card to active state when entering suspend/shutdownUlf Hansson
By adding a card state that records if it is suspended or resumed, we can accept asyncronus suspend/resume requests for the mmc and sd bus_ops. MMC_CAP_AGGRESSIVE_PM, will at request inactivity through the runtime bus_ops callbacks, execute a suspend of the the card. In the state were this has been done, we can receive a suspend request for the mmc bus, which for sd and mmc forced the card to active state by a pm_runtime_get_sync. In other words, the card was resumed and then immediately suspended again, completely unnecessary. Since the suspend/resume bus_ops callbacks for sd and mmc are now capable of handling asynchronous requests, we no longer need to force the card to active state before executing suspend. Evidently preventing the above sequence for MMC_CAP_AGGRESSIVE_PM. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: core: Remove deprecated mmc_suspend|resume_host APIsUlf Hansson
The are no more users of the deprecated mmc_suspend|resume_host API, so let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: core: Move cached value of the negotiated ocr mask to card structUlf Hansson
The negotiated ocr mask is directly related to the card. Once a card gets removed, the mask shall be dropped. By moving the cache of the ocr mask from the host struct to the card struct we have accomplished this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: core: Do not poll for busy with status cmd for all switch cmdsUlf Hansson
Some switch operations like poweroff notify, shall according to the spec not be followed by any other new commands. For these cases and when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not send status commands to poll for busy detection. Instead wait for the stated timeout from the EXT_CSD before completing the request. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: core: clean up duplicate macrosJackey Shen
Clean up the duplicate macros: mmc_sd_card_uhs -> mmc_card_uhs mmc_sd_card_set_uhs -> mmc_card_set_uhs Signed-off-by: Jackey Shen <jackey.shen@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: dw_mmc: guarantee stop-abort cmd in data errorsSeungwon Jeon
In error cases, DTO interrupt may or may not be generated depending on remained data. Stop/Abort command ensures DTO generation for that situation. Currently if 'stop' field of data is empty, there is no stop/abort command. So, it could hang waiting DTO. This change reinforces these cases. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: dw_mmc: control card read thresholdSeungwon Jeon
Card Read Threshold should be ensured that the card clock does not stop in the middle of a block of data being transferred from the card to the Host. Specially, clock stop is allowed in fast transfer such as HS200 or SDR104 mode. And so, it should be enabled. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: dw_mmc: adjust the fifoth with block sizeSeungwon Jeon
This change helps to choose msize, rx_watermark and tx_watermark depending on block size for IDMAC mode. For SDIO block size can be variable, so if these values are set incorrectly, card clock may stop. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: core: remove dead function mmc_try_claim_hostGrant Grundler
cscope says there are no callers for mmc_try_claim_host in the kernel. No reason to keep it. Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: sdhci: get voltage from sdhc hostHaijun Zhang
We use host->ocr_mask to hold the voltage get from device-tree node, In case host->ocr_mask was available, we use host->ocr_mask as the final available voltage can be used by MMC/SD/SDIO card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: core: parse voltage from device-treeHaijun Zhang
Add function to support getting voltage from device-tree. If voltage-range is specified in device-tree node, this function will parse it and return the available voltage mask. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: revision-specific CLK_CTRL2 handlingGuennadi Liakhovetski
Some newer MMCIF IP revisions contain a CE_CLK_CTRL2 register, that has to be set for proper operation. Support for this feature is added in a way to preserve the current behaviour by default, i.e. when it is not enabled in platform data. Patch is based on work by Nobuyuki HIRAI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: revision-specific Command Completion Signal handlingGuennadi Liakhovetski
Some earlier MMCIF IP revisions contained Command Completion Signal support, which has been dropped again in modern versions. Sopport for this feature is added in a way to preserve the current behaviour by default, i.e. when it is not enabled in platform data. Patch is based on work by Nobuyuki HIRAI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-22 11:54:46 +0000