| Age | Commit message (Collapse) | Author |
|---|
|
Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during writeback_sb_inodes,
which increases the merge rate when relatively contiguous small files
are written by the filesystem. It helps both on flash and spindles.
For an fs_mark workload creating 4K files in parallel across 8 drives,
this commit improves performance ~9% more by unplugging before calling
cond_resched(). cond_resched() doesn't trigger an implicit unplug, so
explicitly getting the IO down to the device before scheduling reduces
latencies for anyone waiting on clean pages.
It also cuts down on how often we use kblockd to unplug, which means
less work bouncing from one workqueue to another.
Many more details about how we got here:
https://lkml.org/lkml/2015/9/11/570
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We had to revert the pluggin in writeback_sb_inodes() because the
wb->list_lock is held, but we could easily plug at a higher level before
taking that lock, and unplug after releasing it. This does that.
Chris will run performance numbers, just to verify that this approach is
comparable to the alternative (we could just drop and re-take the lock
around the blk_finish_plug() rather than these two commits.
I'd have preferred waiting for actual performance numbers before picking
one approach over the other, but I don't want to release rc1 with the
known "sleeping function called from invalid context" issue, so I'll
pick this cleanup version for now. But if the numbers show that we
really want to plug just at the writeback_sb_inodes() level, and we
should just play ugly games with the spinlock, we'll switch to that.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit d353d7587d02116b9732d5c06615aed75a4d3a47.
Doing the block layer plug/unplug inside writeback_sb_inodes() is
broken, because that function is actually called with a spinlock held:
wb->list_lock, as pointed out by Chris Mason.
Chris suggested just dropping and re-taking the spinlock around the
blk_finish_plug() call (the plgging itself can happen under the
spinlock), and that would technically work, but is just disgusting.
We do something fairly similar - but not quite as disgusting because we
at least have a better reason for it - in writeback_single_inode(), so
it's not like the caller can depend on the lock being held over the
call, but in this case there just isn't any good reason for that
"release and re-take the lock" pattern.
[ In general, we should really strive to avoid the "release and retake"
pattern for locks, because in the general case it can easily cause
subtle bugs when the caller caches any state around the call that
might be invalidated by dropping the lock even just temporarily. ]
But in this case, the plugging should be easy to just move up to the
callers before the spinlock is taken, which should even improve the
effectiveness of the plug. So there is really no good reason to play
games with locking here.
I'll send off a test-patch so that Dave Chinner can verify that that
plug movement works. In the meantime this just reverts the problematic
commit and adds a comment to the function so that we hopefully don't
make this mistake again.
Reported-by: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull blk-cg updates from Jens Axboe:
"A bit later in the cycle, but this has been in the block tree for a a
while. This is basically four patchsets from Tejun, that improve our
buffered cgroup writeback. It was dependent on the other cgroup
changes, but they went in earlier in this cycle.
Series 1 is set of 5 patches that has cgroup writeback updates:
- bdi_writeback iteration fix which could lead to some wb's being
skipped or repeated during e.g. sync under memory pressure.
- Simplification of wb work wait mechanism.
- Writeback tracepoints updated to report cgroup.
Series 2 is is a set of updates for the CFQ cgroup writeback handling:
cfq has always charged all async IOs to the root cgroup. It didn't
have much choice as writeback didn't know about cgroups and there
was no way to tell who to blame for a given writeback IO.
writeback finally grew support for cgroups and now tags each
writeback IO with the appropriate cgroup to charge it against.
This patchset updates cfq so that it follows the blkcg each bio is
tagged with. Async cfq_queues are now shared across cfq_group,
which is per-cgroup, instead of per-request_queue cfq_data. This
makes all IOs follow the weight based IO resource distribution
implemented by cfq.
- Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff.
- Other misc review points addressed, acks added and rebased.
Series 3 is the blkcg policy cleanup patches:
This patchset contains assorted cleanups for blkcg_policy methods
and blk[c]g_policy_data handling.
- alloc/free added for blkg_policy_data. exit dropped.
- alloc/free added for blkcg_policy_data.
- blk-throttle's async percpu allocation is replaced with direct
allocation.
- all methods now take blk[c]g_policy_data instead of blkcg_gq or
blkcg.
And finally, series 4 is a set of patches cleaning up the blkcg stats
handling:
blkcg's stats have always been somwhat of a mess. This patchset
tries to improve the situation a bit.
- The following patches added to consolidate blkcg entry point and
blkg creation. This is in itself is an improvement and helps
colllecting common stats on bio issue.
- per-blkg stats now accounted on bio issue rather than request
completion so that bio based and request based drivers can behave
the same way. The issue was spotted by Vivek.
- cfq-iosched implements custom recursive stats and blk-throttle
implements custom per-cpu stats. This patchset make blkcg core
support both by default.
- cfq-iosched and blk-throttle keep track of the same stats
multiple times. Unify them"
* 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits)
blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy
blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/
blkcg: implement interface for the unified hierarchy
blkcg: misc preparations for unified hierarchy interface
blkcg: separate out tg_conf_updated() from tg_set_conf()
blkcg: move body parsing from blkg_conf_prep() to its callers
blkcg: mark existing cftypes as legacy
blkcg: rename subsystem name from blkio to io
blkcg: refine error codes returned during blkcg configuration
blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device()
blkcg: reduce stack usage of blkg_rwstat_recursive_sum()
blkcg: remove cfqg_stats->sectors
blkcg: move io_service_bytes and io_serviced stats into blkcg_gq
blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq
blkcg: make blkcg_[rw]stat per-cpu
blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it
blkcg: consolidate blkg creation in blkcg_bio_issue_check()
blk-throttle: improve queue bypass handling
blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup()
blkcg: inline [__]blkg_lookup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
|
|
call wait_sb_inodes()
e79729123f63 ("writeback: don't issue wb_writeback_work if clean")
updated writeback path to avoid kicking writeback work items if there
are no inodes to be written out; unfortunately, the avoidance logic
was too aggressive and broke sync_inodes_sb().
* sync_inodes_sb() must write out I_DIRTY_TIME inodes but I_DIRTY_TIME
inodes dont't contribute to bdi/wb_has_dirty_io() tests and were
being skipped over.
* inodes are taken off wb->b_dirty/io/more_io lists after writeback
starts on them. sync_inodes_sb() skipping wait_sb_inodes() when
bdi_has_dirty_io() breaks it by making it return while writebacks
are in-flight.
This patch fixes the breakages by
* Removing bdi_has_dirty_io() shortcut from bdi_split_work_to_wbs().
The callers are already testing the condition.
* Removing bdi_has_dirty_io() shortcut from sync_inodes_sb() so that
it always calls into bdi_split_work_to_wbs() and wait_sb_inodes().
* Making bdi_split_work_to_wbs() consider the b_dirty_time list for
WB_SYNC_ALL writebacks.
Kudos to Eryu, Dave and Jan for tracking down the issue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: e79729123f63 ("writeback: don't issue wb_writeback_work if clean")
Link: http://lkml.kernel.org/g/20150812101204.GE17933@dhcp-13-216.nay.redhat.com
Reported-and-bisected-by: Eryu Guan <eguan@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.com>
Cc: Ted Ts'o <tytso@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The following tracepoints are updated to report the cgroup used during
cgroup writeback.
* writeback_write_inode[_start]
* writeback_queue
* writeback_exec
* writeback_start
* writeback_written
* writeback_wait
* writeback_nowork
* writeback_wake_background
* wbc_writepage
* writeback_queue_io
* bdi_dirty_ratelimit
* balance_dirty_pages
* writeback_sb_inodes_requeue
* writeback_single_inode[_start]
Note that writeback_bdi_register is separated out from writeback_class
as reporting cgroup doesn't make sense to it. Tracepoints which take
bdi are updated to take bdi_writeback instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
wb_writeback_work->single_wait/done are used for the wait mechanism
for synchronous wb_work (wb_writeback_work) items which are issued
when bdi_split_work_to_wbs() fails to allocate memory for asynchronous
wb_work items; however, there's no reason to use a separate wait
mechanism for this. bdi_split_work_to_wbs() can simply use on-stack
fallback wb_work item and separate wb_completion to wait for it.
This patch removes wb_work->single_wait/done and the related code and
make bdi_split_work_to_wbs() use on-stack fallback wb_work and
wb_completion instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
wb's (bdi_writeback's) are currently keyed by memcg ID; however, in an
earlier implementation, wb's were keyed by blkcg ID.
bdi_for_each_wb() walks bdi->cgwb_tree in the ascending ID order and
allows iterations to start from an arbitrary ID which is used to
interrupt and resume iterations.
Unfortunately, while changing wb to be keyed by memcg ID instead of
blkcg, bdi_for_each_wb() was missed and is still assuming that wb's
are keyed by blkcg ID. This doesn't affect iterations which don't get
interrupted but bdi_split_work_to_wbs() makes use of iteration
resuming on allocation failures and thus may incorrectly skip or
repeat wb's.
Fix it by changing bdi_for_each_wb() to take memcg IDs instead of
blkcg IDs and updating bdi_split_work_to_wbs() accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There's a small consistency problem between the inode and writeback
naming. Writeback calls the "for IO" inode queues b_io and
b_more_io, but the inode calls these the "writeback list" or
i_wb_list. This makes it hard to an new "under writeback" list to
the inode, or call it an "under IO" list on the bdi because either
way we'll have writeback on IO and IO on writeback and it'll just be
confusing. I'm getting confused just writing this!
So, rename the inode "for IO" list variable to i_io_list so we can
add a new "writeback list" in a subsequent patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dave Chinner <dchinner@redhat.com>
|
|
When competing sync(2) calls walk the same filesystem, they need to
walk the list of inodes on the superblock to find all the inodes
that we need to wait for IO completion on. However, when multiple
wait_sb_inodes() calls do this at the same time, they contend on the
the inode_sb_list_lock and the contention causes system wide
slowdowns. In effect, concurrent sync(2) calls can take longer and
burn more CPU than if they were serialised.
Stop the worst of the contention by adding a per-sb mutex to wrap
around wait_sb_inodes() so that we only execute one sync(2) IO
completion walk per superblock superblock at a time and hence avoid
contention being triggered by concurrent sync(2) calls.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dave Chinner <dchinner@redhat.com>
|
|
The process of reducing contention on per-superblock inode lists
starts with moving the locking to match the per-superblock inode
list. This takes the global lock out of the picture and reduces the
contention problems to within a single filesystem. This doesn't get
rid of contention as the locks still have global CPU scope, but it
does isolate operations on different superblocks form each other.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dave Chinner <dchinner@redhat.com>
|
|
Doing writeback on lots of little files causes terrible IOPS storms
because of the per-mapping writeback plugging we do. This
essentially causes imeediate dispatch of IO for each mapping,
regardless of the context in which writeback is occurring.
IOWs, running a concurrent write-lots-of-small 4k files using fsmark
on XFS results in a huge number of IOPS being issued for data
writes. Metadata writes are sorted and plugged at a high level by
XFS, so aggregate nicely into large IOs. However, data writeback IOs
are dispatched in individual 4k IOs, even when the blocks of two
consecutively written files are adjacent.
Test VM: 8p, 8GB RAM, 4xSSD in RAID0, 100TB sparse XFS filesystem,
metadata CRCs enabled.
Kernel: 3.10-rc5 + xfsdev + my 3.11 xfs queue (~70 patches)
Test:
$ ./fs_mark -D 10000 -S0 -n 10000 -s 4096 -L 120 -d
/mnt/scratch/0 -d /mnt/scratch/1 -d /mnt/scratch/2 -d
/mnt/scratch/3 -d /mnt/scratch/4 -d /mnt/scratch/5 -d
/mnt/scratch/6 -d /mnt/scratch/7
Result:
wall sys create rate Physical write IO
time CPU (avg files/s) IOPS Bandwidth
----- ----- ------------ ------ ---------
unpatched 6m56s 15m47s 24,000+/-500 26,000 130MB/s
patched 5m06s 13m28s 32,800+/-600 1,500 180MB/s
improvement -26.44% -14.68% +36.67% -94.23% +38.46%
If I use zero length files, this workload at about 500 IOPS, so
plugging drops the data IOs from roughly 25,500/s to 1000/s.
3 lines of code, 35% better throughput for 15% less CPU.
The benefits of plugging at this layer are likely to be higher for
spinning media as the IO patterns for this workload are going make a
much bigger difference on high IO latency devices.....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
bio_associate_blkcg(), bio_associate_current() and wbc_account_io()
are used to implement cgroup writeback support for filesystems and
thus need to be exported. Export them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, even when a filesystem doesn't set the FS_CGROUP_WRITEBACK
flag, if the filesystem uses wbc_init_bio() and wbc_account_io(), the
foreign inode detection and migration logic still ends up activating
cgroup writeback which is unexpected. This patch ensures that the
foreign inode detection logic stays disabled when inode_cgwb_enabled()
is false by not associating writeback_control's with bdi_writeback's.
This also avoids unnecessary operations in wbc_init_bio(),
wbc_account_io() and wbc_detach_inode() for filesystems which don't
support cgroup writeback.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
For the purpose of foreign inode detection, wb's (bdi_writeback's) are
identified by the associated memcg ID. As we create a separate wb for
each memcg, this is enough to identify the active wb's; however, when
blkcg is enabled or disabled higher up in the hierarchy, the mapping
between memcg and blkcg changes which in turn creates a new wb to
service the new mapping. The old wb is unlinked from index and
released after all references are drained. The foreign inode
detection logic can't detect this condition because both the old and
new wb's point to the same memcg and thus never decides to move inodes
attached to the old wb to the new one.
This patch adds logic to initiate switching immediately in
wbc_attach_and_unlock_inode() if the associated wb is dying. We can
make the usual foreign detection logic to distinguish the different
wb's mapped to the memcg but the dying wb is never gonna be in active
service again and there's no point in tracking the usage history and
reaching the switch verdict after enough data points are collected.
It's already known that the wb has to be switched.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
As concurrent write sharing of an inode is expected to be very rare
and memcg only tracks page ownership on first-use basis severely
confining the usefulness of such sharing, cgroup writeback tracks
ownership per-inode. While the support for concurrent write sharing
of an inode is deemed unnecessary, an inode being written to by
different cgroups at different points in time is a lot more common,
and, more importantly, charging only by first-use can too readily lead
to grossly incorrect behaviors (single foreign page can lead to
gigabytes of writeback to be incorrectly attributed).
To resolve this issue, cgroup writeback detects the majority dirtier
of an inode and transfers the ownership to it. The previous patches
implemented the foreign condition detection mechanism and laid the
groundwork. This patch implements the actual switching.
With the previously implemented [unlocked_]inode_to_wb_and_list_lock()
and wb stat transaction, grabbing wb->list_lock, inode->i_lock and
mapping->tree_lock gives us full exclusion against all wb operations
on the target inode. inode_switch_wb_work_fn() grabs all the locks
and transfers the inode atomically along with its RECLAIMABLE and
WRITEBACK stats.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
With the previous three patches, all operations which acquire wb from
inode are either under one of inode->i_lock, mapping->tree_lock or
wb->list_lock or protected by unlocked_inode_to_wb transaction. This
will be depended upon by foreign inode wb switching.
This patch adds lockdep assertion to inode_to_wb() so that usages
outside the above list locks can be caught easily. There are three
exceptions.
* locked_inode_to_wb_and_lock_list() is holding wb->list_lock but the
wb may not be the inode's. Ensuring that is the function's role
after all. Updated to deref inode->i_wb directly.
* inode_wb_stat_unlocked_begin() is usually protected by combination
of !I_WB_SWITCH and rcu_read_lock(). Updated to deref inode->i_wb
directly.
* inode_congested() wants to test whether inode->i_wb is set before
starting the transaction. Added inode_to_wb_is_valid() which tests
inode->i_wb directly.
v5: might_lock() removed. It annotates that the lock is grabbed w/
irq enabled which isn't the case and triggering lockdep warning
spuriously.
v4: might_lock() added to unlocked_inode_to_wb_begin().
v3: inode_congested() conversion added.
v2: locked_inode_to_wb_and_lock_list() was missing in the first
version.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Similar to wb stat updates, inode_congested() accesses the associated
wb of an inode locklessly, which will break with foreign inode wb
switching. This path updates inode_congested() to use unlocked inode
wb access transaction introduced by the previous patch.
Combined with the previous two patches, this makes all wb list and
access operations to be protected by either of inode->i_lock,
wb->list_lock, or mapping->tree_lock while wb switching is in
progress.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
updates
The mechanism for detecting whether an inode should switch its wb
(bdi_writeback) association is now in place. This patch build the
framework for the actual switching.
This patch adds a new inode flag I_WB_SWITCHING, which has two
functions. First, the easy one, it ensures that there's only one
switching in progress for a give inode. Second, it's used as a
mechanism to synchronize wb stat updates.
The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters
but track the current number of dirty pages and pages under writeback
respectively. As such, when an inode is moved from one wb to another,
the inode's portion of those stats have to be transferred together;
unfortunately, this is a bit tricky as those stat updates are percpu
operations which are performed without holding any lock in some
places.
This patch solves the problem in a similar way as memcg. Each such
lockless stat updates are wrapped in transaction surrounded by
unlocked_inode_to_wb_begin/end(). During normal operation, they map
to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted,
mapping->tree_lock is grabbed across the transaction.
In turn, the switching path sets I_WB_SWITCHING and waits for a RCU
grace period to pass before actually starting to switch, which
guarantees that all stat update paths are synchronizing against
mapping->tree_lock.
This patch still doesn't implement the actual switching.
v3: Updated on top of the recent cancel_dirty_page() updates.
unlocked_inode_to_wb_begin() now nests inside
mem_cgroup_begin_page_stat() to match the locking order.
v2: The i_wb access transaction will be used for !stat accesses too.
Function names and comments updated accordingly.
s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/
s/switch_wb/switch_wbs/
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
cgroup writeback currently assumes that inode to wb association
doesn't change; however, with the planned foreign inode wb switching
mechanism, the association will change dynamically.
When an inode needs to be put on one of the IO lists of its wb, the
current code simply calls inode_to_wb() and locks the returned wb;
however, with the planned wb switching, the association may change
before locking the wb and may even get released.
This patch implements [locked_]inode_to_wb_and_lock_list() which pins
the associated wb while holding i_lock, releases it, acquires
wb->list_lock and verifies that the association hasn't changed
inbetween. As the association will be protected by both locks among
other things, this guarantees that the wb is the inode's associated wb
until the list_lock is released.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
As concurrent write sharing of an inode is expected to be very rare
and memcg only tracks page ownership on first-use basis severely
confining the usefulness of such sharing, cgroup writeback tracks
ownership per-inode. While the support for concurrent write sharing
of an inode is deemed unnecessary, an inode being written to by
different cgroups at different points in time is a lot more common,
and, more importantly, charging only by first-use can too readily lead
to grossly incorrect behaviors (single foreign page can lead to
gigabytes of writeback to be incorrectly attributed).
To resolve this issue, cgroup writeback detects the majority dirtier
of an inode and will transfer the ownership to it. To avoid
unnnecessary oscillation, the detection mechanism keeps track of
history and gives out the switch verdict only if the foreign usage
pattern is stable over a certain amount of time and/or writeback
attempts.
The detection mechanism has fairly low space and computation overhead.
It adds 8 bytes to struct inode (one int and two u16's) and minimal
amount of calculation per IO. The detection mechanism converges to
the correct answer usually in several seconds of IO time when there's
a clear majority dirtier. Even when there isn't, it can reach an
acceptable answer fairly quickly under most circumstances.
Please see wb_detach_inode() for more details.
This patch only implements detection. Following patches will
implement actual switching.
v2: wbc_account_io() now checks whether the wbc is associated with a
wb before dereferencing it. This can happen when pageout() is
writing pages directly without going through the usual writeback
path. As pageout() path is single-threaded, we don't want it to
be blocked behind a slow cgroup and ultimately want it to delegate
actual writing to the usual writeback path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, for cgroup writeback, the IO submission paths directly
associate the bio's with the blkcg from inode_to_wb_blkcg_css();
however, it'd be necessary to keep more writeback context to implement
foreign inode writeback detection. wbc (writeback_control) is the
natural fit for the extra context - it persists throughout the
writeback of each inode and is passed all the way down to IO
submission paths.
This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and
wbc_attach_fdatawrite_inode() which are used to associate wbc with the
inode being written back. IO submission paths now use wbc_init_bio()
instead of directly associating bio's with blkcg themselves. This
leaves inode_to_wb_blkcg_css() w/o any user. The function is removed.
wbc currently only tracks the associated wb (bdi_writeback). Future
patches will add more for foreign inode detection. The association is
established under i_lock which will be depended upon when migrating
foreign inodes to other wb's.
As currently, once established, inode to wb association never changes,
going through wbc when initializing bio's doesn't cause any behavior
changes.
v2: submit_blk_blkcg() now checks whether the wbc is associated with a
wb before dereferencing it. This can happen when pageout() is
writing pages directly without going through the usual writeback
path. As pageout() path is single-threaded, we don't want it to
be blocked behind a slow cgroup and ultimately want it to delegate
actual writing to the usual writeback path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, majority of cgroup writeback support including all the
above functions are implemented in include/linux/backing-dev.h and
mm/backing-dev.c; however, the portion closely related to writeback
logic implemented in include/linux/writeback.h and mm/page-writeback.c
will expand to support foreign writeback detection and correction.
This patch moves wb[_try]_get() and wb_put() to
include/linux/backing-dev-defs.h so that they can be used from
writeback.h and inode_{attach|detach}_wb() to writeback.h and
page-writeback.c.
This is pure reorganization and doesn't introduce any functional
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
and rename it to wb_over_bg_thresh(). The function is closely tied to
the dirty throttling mechanism implemented in page-writeback.c. This
relocation will allow future updates necessary for cgroup writeback
support.
While at it, add function comment.
This is pure reorganization and doesn't introduce any behavioral
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch is a part of the series to define wb_domain which
represents a domain that wb's (bdi_writeback's) belong to and are
measured against each other in. This will enable IO backpressure
propagation for cgroup writeback.
global_dirty_limit exists to regulate the global dirty threshold which
is a property of the wb_domain. This patch moves hard_dirty_limit,
dirty_lock, and update_time into wb_domain.
This is pure reorganization and doesn't introduce any behavioral
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
__wb_update_bandwidth() is called from two places -
fs/fs-writeback.c::balance_dirty_pages() and
mm/page-writeback.c::wb_writeback(). The latter updates only the
write bandwidth while the former also deals with the dirty ratelimit.
The two callsites are distinguished by whether @thresh parameter is
zero or not, which is cryptic. In addition, the two files define
their own different versions of wb_update_bandwidth() on top of
__wb_update_bandwidth(), which is confusing to say the least. This
patch cleans up [__]wb_update_bandwidth() in the following ways.
* __wb_update_bandwidth() now takes explicit @update_ratelimit
parameter to gate dirty ratelimit handling.
* mm/page-writeback.c::wb_update_bandwidth() is flattened into its
caller - balance_dirty_pages().
* fs/fs-writeback.c::wb_update_bandwidth() is moved to
mm/page-writeback.c and __wb_update_bandwidth() is made static.
* While at it, add a lockdep assertion to __wb_update_bandwidth().
Except for the lockdep addition, this is pure reorganization and
doesn't introduce any behavioral changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The function name wb_dirty_limit(), its argument @dirty and the local
variable @wb_dirty are mortally confusing given that the function
calculates per-wb threshold value not dirty pages, especially given
that @dirty and @wb_dirty are used elsewhere for dirty pages.
Let's rename the function to wb_calc_thresh() and wb_dirty to
wb_thresh.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
__mark_inode_dirty() always dirtied the inode against the root wb
(bdi_writeback). The previous patches added all the infrastructure
necessary to attribute an inode against the wb of the dirtying cgroup.
This patch updates __mark_inode_dirty() so that it uses the wb
associated with the inode instead of unconditionally using the root
one.
Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being dirtied against the root wb.
v2: Updated for per-inode wb association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
[try_]writeback_inodes_sb[_nr]() and sync_inodes_sb() currently only
handle dirty inodes on the root wb (bdi_writeback) of the target bdi.
This patch implements bdi_split_work_to_wbs() and use it to make these
functions handle multiple wb's.
bdi_split_work_to_wbs() takes a base wb_writeback_work and create
clones of it and issue them to the wb's of the target bdi. The base
work's nr_pages is distributed using wb_split_bdi_pages() -
ie. according to each wb's write bandwidth's proportion in the bdi.
Cloning a bdi involves memory allocation which may fail. In such
cases, bdi_split_work_to_wbs() issues the base work directly and waits
for its completion before proceeding to the next wb to guarantee
forward progress and correctness under memory pressure.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it
handles s_umount locking and skips if writeback is already in
progress. The in progress test is performed on the root wb
(bdi_writeback) which isn't sufficient for cgroup writeback support.
The test must be done per-wb.
To prepare for the change, this patch factors out
__writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds
@skip_if_busy and moves the in progress test right before queueing the
wb_writeback_work. try_writeback_inodes_sb_nr() now just grabs
s_umount and invokes __writeback_inodes_sb_nr() with asserted
@skip_if_busy. This way, later addition of multiple wb handling can
skip only the wb's which already have writeback in progress.
This swaps the order between in progress test and s_umount test which
can flip the return value when writeback is in progress and s_umount
is being held by someone else but this shouldn't cause any meaningful
difference. It's a fringe condition and the return value is an
unsynchronized hint anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
For cgroup writeback, multiple wb_writeback_work items may need to be
issuedto accomplish a single task. The previous patch updated the
waiting mechanism such that wb_wait_for_completion() can wait for
multiple work items.
Issuing mulitple work items involves memory allocation which may fail.
As most writeback operations can't fail or blocked on memory
allocation, in such cases, we'll fall back to sequential issuing of an
on-stack work item, which would need to be waited upon sequentially.
This patch implements wb_wait_for_single_work() which waits for a
single work item independently from wb_completion waiting so that such
fallback mechanism can be used without getting tangled with the usual
issuing / completion operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
If the completion of a wb_writeback_work can be waited upon by setting
its ->done to a struct completion and waiting on it; however, for
cgroup writeback support, it's necessary to issue multiple work items
to multiple bdi_writebacks and wait for the completion of all.
This patch implements wb_completion which can wait for multiple work
items and replaces the struct completion with it. It can be defined
using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and
waited for by wb_wait_for_completion().
Nobody currently issues multiple work items and this patch doesn't
introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, a wb_writeback_work is freed automatically on completion if
it doesn't have ->done set. Add wb_writeback_work->auto_free to make
the switch explicit. This will help cgroup writeback support where
waiting for completion and whether to free automatically don't
necessarily move together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
wakeup_dirtytime_writeback() currently only starts writeback on the
root wb (bdi_writeback). For cgroup writeback support, update the
function to check all wbs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
wakeup_flusher_threads() currently only starts writeback on the root
wb (bdi_writeback). For cgroup writeback support, update the function
to wake up all wbs and distribute the number of pages to write
according to the proportion of each wb's write bandwidth, which is
implemented in wb_split_bdi_pages().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
of backing_dev_info
bdi_start_background_writeback() currently takes @bdi and kicks the
root wb (bdi_writeback). In preparation for cgroup writeback support,
make it take wb instead.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
backing_dev_info
writeback_in_progress() currently takes @bdi and returns whether
writeback is in progress on its root wb (bdi_writeback). In
preparation for cgroup writeback support, make it take wb instead.
While at it, make it an inline function.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
bdi_start_writeback() is a thin wrapper on top of
__wb_start_writeback() which is used only by laptop_mode_timer_fn().
This patches removes bdi_start_writeback(), renames
__wb_start_writeback() to wb_start_writeback() and makes
laptop_mode_timer_fn() use it instead.
This doesn't cause any functional difference and will ease making
laptop_mode_timer_fn() cgroup writeback aware.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There are several places in fs/fs-writeback.c which queues
wb_writeback_work without checking whether the target wb
(bdi_writeback) has dirty inodes or not. The only thing
wb_writeback_work does is writing back the dirty inodes for the target
wb and queueing a work item for a clean wb is essentially noop. There
are some side effects such as bandwidth stats being updated and
triggering tracepoints but these don't affect the operation in any
meaningful way.
This patch makes all writeback_inodes_sb_nr() and sync_inodes_sb()
skip wb_queue_work() if the target bdi is clean. Also, it moves
dirtiness check from wakeup_flusher_threads() to
__wb_start_writeback() so that all its callers benefit from the check.
While the overhead incurred by scheduling a noop work isn't currently
significant, the overhead may be higher with cgroup writeback support
as we may end up issuing noop work items to a lot of clean wb's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
bdi_has_dirty_io() used to only reflect whether the root wb
(bdi_writeback) has dirty inodes. For cgroup writeback support, it
needs to take all active wb's into account. If any wb on the bdi has
dirty inodes, bdi_has_dirty_io() should return true.
To achieve that, as inode_wb_list_{move|del}_locked() now keep track
of the dirty state transition of each wb, the number of dirty wbs can
be counted in the bdi; however, bdi is already aggregating
wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when
there are any dirty inodes by ensuring wb->avg_write_bandwidth can't
dip below 1. bdi_has_dirty_io() can simply test whether
bdi->tot_write_bandwidth is zero or not.
While this bumps the value of wb->avg_write_bandwidth to one when it
used to be zero, this shouldn't cause any meaningful behavior
difference.
bdi_has_dirty_io() is made an inline function which tests whether
->tot_write_bandwidth is non-zero. Also, WARN_ON_ONCE()'s on its
value are added to inode_wb_list_{move|del}_locked().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
cgroup writeback support needs to keep track of the sum of
avg_write_bandwidth of all wb's (bdi_writeback's) with dirty inodes to
distribute write workload. This patch adds bdi->tot_write_bandwidth
and updates inode_wb_list_move_locked(), inode_wb_list_del_locked()
and wb_update_write_bandwidth() to adjust it as wb's gain and lose
dirty inodes and its avg_write_bandwidth gets updated.
As the update events are not synchronized with each other,
bdi->tot_write_bandwidth is an atomic_long_t.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback)
has any dirty inode by testing all three IO lists on each invocation
without actively keeping track. For cgroup writeback support, a
single bdi will host multiple wb's each of which will host dirty
inodes separately and we'll need to make bdi_has_dirty_io(), which
currently only represents the root wb, aggregate has_dirty_io from all
member wb's, which requires tracking transitions in has_dirty_io state
on each wb.
This patch introduces inode_wb_list_{move|del}_locked() to consolidate
IO list operations leaving queue_io() the only other function which
directly manipulates IO lists (via move_expired_inodes()). All three
functions are updated to call wb_io_lists_[de]populated() which keep
track of whether the wb has dirty inodes or not and record it using
the new WB_has_dirty_io flag. inode_wb_list_moved_locked()'s return
value indicates whether the wb had no dirty inodes before.
mark_inode_dirty() is restructured so that the return value of
inode_wb_list_move_locked() can be used for deciding whether to wake
up the wb.
While at it, change {bdi|wb}_has_dirty_io()'s return values to bool.
These functions were returning 0 and 1 before. Also, add a comment
explaining the synchronization of wb_state flags.
v2: Updated to accommodate b_dirty_time.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
In several places, bdi_congested() and its wrappers are used to
determine whether more IOs should be issued. With cgroup writeback
support, this question can't be answered solely based on the bdi
(backing_dev_info). It's dependent on whether the filesystem and bdi
support cgroup writeback and the blkcg the inode is associated with.
This patch implements inode_congested() and its wrappers which take
@inode and determines the congestion state considering cgroup
writeback. The new functions replace bdi_*congested() calls in places
where the query is about specific inode and task.
There are several filesystem users which also fit this criteria but
they should be updated when each filesystem implements cgroup
writeback support.
v2: Now that a given inode is associated with only one wb, congestion
state can be determined independent from the asking task. Drop
@task. Spotted by Vivek. Also, converted to take @inode instead
of @mapping and renamed to inode_congested().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
For the planned cgroup writeback support, on each bdi
(backing_dev_info), each memcg will be served by a separate wb
(bdi_writeback). This patch updates bdi so that a bdi can host
multiple wbs (bdi_writebacks).
On the default hierarchy, blkcg implicitly enables memcg. This allows
using memcg's page ownership for attributing writeback IOs, and every
memcg - blkcg combination can be served by its own wb by assigning a
dedicated wb to each memcg. This means that there may be multiple
wb's of a bdi mapped to the same blkcg. As congested state is per
blkcg - bdi combination, those wb's should share the same congested
state. This is achieved by tracking congested state via
bdi_writeback_congested structs which are keyed by blkcg.
bdi->wb remains unchanged and will keep serving the root cgroup.
cgwb's (cgroup wb's) for non-root cgroups are created on-demand or
looked up while dirtying an inode according to the memcg of the page
being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree
by its memcg id. Once an inode is associated with its wb, it can be
retrieved using inode_to_wb().
Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being associated with bdi->wb.
v3: inode_attach_wb() in account_page_dirtied() moved inside
mapping_cap_account_dirty() block where it's known to be !NULL.
Also, an unnecessary NULL check before kfree() removed. Both
detected by the kbuild bot.
v2: Updated so that wb association is per inode and wb is per memcg
rather than blkcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Now that bdi definitions are moved to backing-dev-defs.h,
backing-dev.h can include blkdev.h and inline inode_to_bdi() without
worrying about introducing circular include dependency. The function
gets called from hot paths and fairly trivial.
This patch makes inode_to_bdi() and sb_is_blkdev_sb() that the
function calls inline. blockdev_superblock and noop_backing_dev_info
are EXPORT_GPL'd to allow the inline functions to be used from
modules.
While at it, make sb_is_blkdev_sb() return bool instead of int.
v2: Fixed typo in description as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->wb_lock and ->worklist into wb.
* The lock protects bdi->worklist and bdi->wb.dwork scheduling. While
moving, rename it to wb->work_lock as wb->wb_lock is confusing.
Also, move wb->dwork downwards so that it's colocated with the new
->work_lock and ->work_list fields.
* bdi_writeback_workfn() -> wb_workfn()
bdi_wakeup_thread_delayed(bdi) -> wb_wakeup_delayed(wb)
bdi_wakeup_thread(bdi) -> wb_wakeup(wb)
bdi_queue_work(bdi, ...) -> wb_queue_work(wb, ...)
__bdi_start_writeback(bdi, ...) -> __wb_start_writeback(wb, ...)
get_next_work_item(bdi) -> get_next_work_item(wb)
* bdi_wb_shutdown() is renamed to wb_shutdown() and now takes @wb.
The function contained parts which belong to the containing bdi
rather than the wb itself - testing cap_writeback_dirty and
bdi_remove_from_list() invocation. Those are moved to
bdi_unregister().
* bdi_wb_{init|exit}() are renamed to wb_{init|exit}().
Initializations of the moved bdi->wb_lock and ->work_list are
relocated from bdi_init() to wb_init().
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->state are mechanically replaced with bdi->wb.state
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
bdi_writeback
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.
* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
balanced_dirty_ratelimit, completions and dirty_exceeded.
* writeback_chunk_size() and over_bground_thresh() now take @wb
instead of @bdi.
* bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...)
bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...)
bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...)
bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...)
[__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...)
bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...)
bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...)
* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
respectively. Note that explicit zeroing is dropped in the process
as wb's are cleared in entirety anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
v2: Typo in description fixed as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->bdi_stat[] into wb.
* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
enums is changed from BDI_ to WB_.
* BDI_STAT_BATCH() -> WB_STAT_BATCH()
* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)
* bdi_stat[_error]() -> wb_stat[_error]()
* bdi_writeout_inc() -> wb_writeout_inc()
* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
frees stat.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
