aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-05-05net/mlx4_core: Don't issue PCIe speed/width checks for VFsEyal Perry
Carrying out PCI speed/width checks through pcie_get_minimum_link() on VFs yield wrong results, so remove them. Fixes: b912b2f ('net/mlx4_core: Warn if device doesn't have enough PCI bandwidth') Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net/mlx4_core: Load the Eth driver firstOr Gerlitz
When running in SRIOV mode, VM that is assigned with a non-provisioned Ethernet VFs get themselves a random mac when the Eth driver starts. In this case, if the IB driver startup code that deals with RoCE runs first, it will use a zero mac as the source mac for the Para-Virtual CM MADs which is buggy. To handle that, we change the order of loading. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net/mlx4_core: Fix slave id computation for single port VFMatan Barak
The code that deals with computing the slave id based on a given GID gave wrong results when the number of single port VFs wasn't the same for port 1 vs. port 2 and the relevant VF is single ported on port 2. As a result, incoming CM MADs were dispatched to the wrong VF. Fixed that and added documentation to clarify the computation steps. Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net/mlx4_core: Adjust port number in qp_attach wrapper when detachingJack Morgenstein
When using single ported VFs and the VF is using port 2, we need to adjust the port accordingly (change it from 1 to 2). Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: cdc_ncm: fix buffer overflowBjørn Mork
Commit 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") changed the padding logic for devices with the ZLP flag set. This meant that frames of any size will be sent without additional padding, except for the single byte added if the size is a multiple of the USB packet size. But if the unpadded size is identical to the maximum frame size, and the maximum size is a multiplum of the USB packet size, then this one-byte padding will overflow the buffer. Prevent padding if already at maximum frame size, letting usbnet transmit a ZLP instead in this case. Fixes: 4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs") Reported by: Yu-an Shih <yshih@nvidia.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Altera TSE: ALTERA_TSE should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `altera_tse_probe': altera_tse_main.c:(.text+0x25ec2e): undefined reference to `dma_set_mask' altera_tse_main.c:(.text+0x25ec78): undefined reference to `dma_supported' altera_tse_main.c:(.text+0x25ecb6): undefined reference to `dma_supported' drivers/built-in.o: In function `sgdma_async_read': altera_sgdma.c:(.text+0x25f620): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `sgdma_uninitialize': (.text+0x25f678): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sgdma_uninitialize': (.text+0x25f696): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sgdma_initialize': (.text+0x25f6f0): undefined reference to `dma_map_single' drivers/built-in.o: In function `sgdma_initialize': (.text+0x25f702): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `sgdma_tx_buffer': (.text+0x25f92a): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `sgdma_rx_status': (.text+0x25fa24): undefined reference to `dma_sync_single_for_cpu' make[3]: *** [vmlinux] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-05-01 Please pull the following batch of fixes intended for the 3.15 stream! For the Bluetooth bits, Gustavo says: "Some fixes for 3.15. There is a revert for the intel driver, a new device id, and two important SSP fixes from Johan." On top of that... Ben Hutchings gives us a fix for an unbalanced irq enable in an rtl8192cu error path. Colin Ian King provides an rtlwifi fix for an uninitialized variable. Felix Fietkau brings a pair of ath9k fixes, one that corrects a hardware initialization value and another that removes an (unnecessary) flag that was being used in a way that led to a software tx queue hang in ath9k. Gertjan van Wingerde pushes a MAINTAINERS change to remove himself from the rt2x00 maintainer team. Hans de Goede fixes a brcmfmac firmware load hang. Larry Finger changes rtlwifi to use the correct queue for V0 traffic on rtl8192se. Rajkumar Manoharan corrects a race in ath9k driver initialization. Stanislaw Gruszka fixes an rt2x00 bug in which disabling beaconing once on USB devices led to permanently disabling beaconing for those devices. Tim Harvey provides fixes for a pair of ath9k issues that can lead to soft lockups in that driver. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: mvmdio: Check for a valid interrupt instead of an errorEzequiel Garcia
The following commit: commit 9ec36cafe43bf835f8f29273597a5b0cbc8267ef Author: Rob Herring <robh@kernel.org> Date: Wed Apr 23 17:57:41 2014 -0500 of/irq: do irq resolution in platform_get_irq changed platform_get_irq() which now returns EINVAL and EPROBE_DEFER, in addition to ENXIO. If there's no interrupt for mvmdio, platform_get_irq() returns EINVAL, but we currently check only for ENXIO. Fix this by looking for a positive integer, which is the proper way of validating a virtual interrupt number. While at it, add a proper handling for the deferral probe case. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net phy: Check for aneg completion before setting state to PHY_RUNNINGBalakumaran Kannan
phy_state_machine should check whether auto-negotiatin is completed before changing phydev->state from PHY_NOLINK to PHY_RUNNING. If auto-negotiation is not completed phydev->state should be set to PHY_AN. Signed-off-by: Balakumaran Kannan <kumaran.4353@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2014-04-30hyperv: Properly handle checksum offloadKY Srinivasan
Do checksum offload only if the client of the driver wants checksum to be offloaded. In V1 version of this patch, I addressed comments from Stephen Hemminger <stephen@networkplumber.org> and Eric Dumazet <eric.dumazet@gmail.com>. In this version of the patch I have addressed comments from David Miller. This patch fixes a bug that is exposed in gateway scenarios. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30gianfar: Avoid unnecessary reg accesses in adjust_link()Claudiu Manoil
For phy devices that don't issue interrupts upon link state changes, phylib polls the link state resulting in repeated calls to adjust_link(), even if the link state didn't change. As a result, some mac registers are repeatedly read and written with the same values, which is not ok. To fix this, adjust_link() has been refactored to check first whether the link state has changed and to take action only if needed, updating mac registers and local state variables. The 'new_state' local flag, set if one of the link params changed (link, speed or duplex), has been rendered useless and removed by this refactoring. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30Revert "macvlan : fix checksums error when we are in bridge mode"Vlad Yasevich
This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30mactap: Fix checksum errors for non-gso packets in bridge modeVlad Yasevich
The following is a problematic configuration: VM1: virtio-net device connected to macvtap0@eth0 VM2: e1000 device connect to macvtap1@eth0 The problem is is that virtio-net supports checksum offloading and thus sends the packets to the host with CHECKSUM_PARTIAL set. On the other hand, e1000 does not support any acceleration. For small TCP packets (and this includes the 3-way handshake), e1000 ends up receiving packets that only have a partial checksum set. This causes TCP to fail checksum validation and to drop packets. As a result tcp connections can not be established. Commit 3e4f8b787370978733ca6cae452720a4f0c296b8 macvtap: Perform GSO on forwarding path. fixes this issue for large packets wthat will end up undergoing GSO. This commit adds a check for the non-GSO case and attempts to compute the checksum for partially checksummed packets in the non-GSO case. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: sxgbe: Added set function for interrupt on completeByungho An
This patch adds set_rx_int_on_com function for interrupt when dma is completed. Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: sxgbe: Added rxqueue enable functionByungho An
This patch adds rxqueue enable function according to number of rxqueue and adds rxqueue disable function for removing. Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: sxgbe: sw reset moved to probe functionByungho An
This patch moves sw reset to probe function because sw reset is needed early stage before open function. Signed-off-by: Byungho An <bh74.an@samsung.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30cxgb4: Decode PCIe Gen3 link speedRoland Dreier
Add handling for " 8 GT/s" in print_port_info(). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30Altera TSE: Add missing include to silence sparse warningsTobias Klauser
This fixes the following sparse warnings: drivers/net/ethernet/altera/altera_msgdma.c:23:5: warning: symbol 'msgdma_initialize' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:28:6: warning: symbol 'msgdma_uninitialize' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:32:6: warning: symbol 'msgdma_reset' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:77:6: warning: symbol 'msgdma_disable_rxirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:83:6: warning: symbol 'msgdma_enable_rxirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:89:6: warning: symbol 'msgdma_disable_txirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:95:6: warning: symbol 'msgdma_enable_txirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:101:6: warning: symbol 'msgdma_clear_rxirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:107:6: warning: symbol 'msgdma_clear_txirq' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:114:5: warning: symbol 'msgdma_tx_buffer' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:129:5: warning: symbol 'msgdma_tx_completions' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:154:5: warning: symbol 'msgdma_add_rx_desc' was not declared. Should it be static? drivers/net/ethernet/altera/altera_msgdma.c:181:5: warning: symbol 'msgdma_rx_status' was not declared. Should it be static? Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30Altera TSE: Fix DMA secriptor length initializationTobias Klauser
sgdma_descrip is a function name as well as the name of a struct. In sgdma_initialize(), we should initialize the descriptor length field with the actual length of a descriptor not with the size of the function. In order to prevent such things from happening in the future, rename the function to sgdma_setup_descrip(). Found by sparse which yields the following warning: drivers/net/ethernet/altera/altera_sgdma.c:74:30: warning: expression using sizeof on a function Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()Ben Hutchings
Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbbLarry Finger
Beginning with kernel 3.13, this driver fails on some systems. The problem was bisected to: Commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac Author: Felix Fietkau <nbd@openwrt.org> Title: mac80211: send control port protocol frames to the VO queue There is noting wrong with the above commit. The regression occurs because V0 queue on RTL8192SE cards uses priority 6, not the usual 7. The fix is to modify the rtl8192se routine that sets the correct transmit queue. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=74541 Reported-by: Alex Miller <almiller_1@yahoo.co.uk> Tested-by: Alex Miller <almiller_1@yahoo.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.13+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k: remove tid->paused flagFelix Fietkau
There are some corner cases where the driver could get stuck with a full tid queue that is paused, leading to a software tx queue hang. Since the tx queueing rework, pausing per-tid queues on aggregation session setup is no longer necessary. The driver will assign sequence numbers to buffered frames when a new session is established, in order to get the correct starting sequence number. mac80211 prevents new frames from entering the queue during setup. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: do not lower ANI setting below default on AR913xFelix Fietkau
When the amount of noise fluctuates strongly, low immunity settings can sometimes disrupt signal detection on AR913x chips. When that happens, no OFDM/CCK errors are reported anymore, and ANI tunes the radio to the lowest immunity settings. Usually rx/tx fails as well in that case. To fix this, keep noise immunity settings at or above ANI default level, which will keep radio parameters at or above INI values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-28net: bonding: Fix format string mismatch in bond_sysfs.cMasanari Iida
Fix format string mismatch in bonding_show_min_links(). Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27slip: fix spinlock variantOliver Hartkopp
With commit cc9fa74e2a ("slip/slcan: added locking in wakeup function") a formerly missing locking was added to slip.c and slcan.c by Andre Naujoks. Alexander Stein contributed the fix 367525c8c2 ("can: slcan: Fix spinlock variant") as the kernel lock debugging advised to use spin_lock_bh() instead of just using spin_lock(). This fix has to be applied to the same code section in slip.c for the same reason too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add a number of Dell devicesBjørn Mork
Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add a number of CMOTech devicesBjørn Mork
A number of older CMOTech modems are based on Qualcomm chips and exporting a QMI/wwan function. Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add Alcatel L800MABjørn Mork
Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add Olivetti Olicard 500Bjørn Mork
Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by: Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add Sierra Wireless MC7305/MC7355Bjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add Sierra Wireless MC73xxBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27net: qmi_wwan: add Sierra Wireless EM7355Bjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27arc_emac: add clock handlingHeiko Stübner
This adds ability for the arc_emac to really handle its supplying clock. To get the needed clock-frequency either a real clock or the previous clock-frequency property must be provided. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27arc_emac: fix probe error pathHeiko Stübner
The probe function at the moment only frees the netdev but does not disconnect the phy or removes the mdio bus it registered. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27cxgb4: Update Kconfig to include Chelsio T5 adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26i40e: fix Timesync Tx interrupt handler codeJacob Keller
This patch fixes the PTP Tx timestamp interrupt handler. The original code misinterpreted the interrupt handler design. We were clearing the ena_mask bit for the Timesync interrupts. This is done to indicate that the interrupt will be handled in a scheduled work item (instead of immediately) and that work item is responsible for re-enabling the interrupts. However, the Tx timestamp was being handled immediately and nothing was ever re-enabling it. This resulted in a single interrupt working for the life of the driver. This patch fixes the issue by instead clearing the bit from icr0 which is used to indicate that the interrupt was immediately handled and can be re-enabled right away. This patch also clears up a related issue due to writing the PRTTSYN_STAT_0 register, which was unintentionally clearing the cause bits for Timesync interrupts. Change-ID: I057bd70d53c302f60fab78246989cbdfa469d83b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26Merge tag 'linux-can-fixes-for-3.15-20140424' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== this is a pull request for net/master, for the v3.15 release cycle, consisting of 26 patches. Thomas Gleixner contributes 21 patches for the c_can driver, which address several shortcomings in the driver like hardware initialisation, concurrency, message ordering and poor performance. Two patches Oliver Hartkopp, one adds a missing lock to the sja1000_isa driver, the other one fixes the return value in the generic bit time configuration function. And finally a patch by Alexander Stein, that fixes the slcan driver to use the correct spinlock variant. To make it 26 patches, Wolfgang Grandegger patch for the c_can_pci driver, which enables the bus master only for MSI and a patch by Wolfram Sang, which converts the 'instance' in the c_can driver to the proper type. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26Altera TSE: Change driver name used by EthtoolVince Bridgers
This patch changes the name used by Ethtool to something more conventional in preparation for TSE Ethtool register dump support to be added in the near future. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26Altera TSE: Fix Panic in probe routine when phy probe failsVince Bridgers
This patch addresses a fault in the error recovery path of the probe routine where the netdev structure was not being unregistered properly leading to a panic only when the phy probe failed. Abbreviated panic stack seen is as follows: (free_netdev+0xXX) from (altera_tse_probe+0xXX) (altera_tse_probe+0xXX) from (platform_drv_probe+0xXX) (platform_drv_probe+0xXX) from (driver_probe_device+0xXX) (driver_probe_device+0xXX) from (__driver_attach+0xXX) (__driver_attach+0xXX) from (bus_for_each_dev+0xXX) (bus_for_each_dev+0xXX) from (driver_attach+0xXX) (driver_attach+0xXX) from (bus_add_driver+0xXX) (bus_add_driver+0xXX) from (driver_register+0xXX) (driver_register+0xXX) from (__platform_driver_register+0xXX) (__platform_driver_register+0xXX) from (altera_tse_driver_init+0xXX) (altera_tse_driver_init+0xXX) from (do_one_initcall+0xXX) (do_one_initcall+0xXX) from (kernel_init_freeable+0xXX) (kernel_init_freeable+0xXX) from (kernel_init+0xXX) (kernel_init+0xXX) from (ret_from_fork+0xXX) Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26Altera TSE: Set the Pause Quanta value to the IEEE default valueVince Bridgers
This patch initializes the pause quanta set for transmitted pause frames to the IEEE specified default of 0xffff. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26Altera TSE: Work around unaligned DMA receive packet issue with Altera SGDMAVince Bridgers
This patch works around a recently discovered unaligned receive dma problem with the Altera SGMDA. The Altera SGDMA component cannot be configured to DMA data to unaligned addresses for receive packet operations from the Triple Speed Ethernet component because of a potential data transfer corruption that can occur. This patch addresses this issue by utilizing the shift 16 bits feature of the Altera Triple Speed Ethernet component and modifying the receive buffer physical addresses accordingly such that the target receive DMA address is always aligned on a 32-bit boundary. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Tested-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Fix failure to configure VF multicast filtersNarender Kumar
Commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism" caused a regression, preventing VFs from configuring multicast filters. Signed-off-by: Naredner Kumar <narender.kumar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Fix vlan credit issues for VFsYuval Mintz
Starting with commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism", the bnx2x started enforcing vlan credits for all vlan configurations. This exposed 2 issues: - Vlan credits are not returned once a VF is removed; this causes a leak of credits, and eventually will lead to VFs with no vlan credits. - A vlan credit must be set aside for the Hypervisor to use, and should not be visible to the VF. Although linux VFs at the moment do not support vlan configuration [from the VF side] which causes them to be resilient to this sort of issue, Windows VF over linux hypervisors might fail to load as the vlan credits become depleted. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26bnx2x: Memory leak during VF removalYuval Mintz
When removing a VF interface, the driver fails to release that VF's mailbox and bulletin board allocated memory. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-25Bluetooth: Add support for Lite-on [04ca:3007]Mohammed Habibulla
Add support for the AR9462 chip T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Mohammed Habibulla <moch@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2014-04-25Revert "Bluetooth: Enable autosuspend for Intel Bluetooth device"Marcel Holtmann
This reverts commit d2bee8fb6e18f6116aada39851918473761f7ab1. Enabling autosuspend for Intel Bluetooth devices has been shown to not work reliable. It does work for some people with certain combinations of USB host controllers, but for others it puts the device to sleep and it will not wake up for any event. These events can be important ones like HCI Inquiry Complete or HCI Connection Request. The events will arrive as soon as you poke the device with a new command, but that is not something we can do in these cases. Initially there were patches to the xHCI USB controller that fixed this for some people, but not for all. This could be well a problem somewhere in the USB subsystem or in the USB host controllers or just plain a hardware issue somewhere. At this moment we just do not know and the only safe action is to revert this patch. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Tedd Ho-Jeong An <tedd.an@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2014-04-24brcmfmac: Fix brcmf_chip_ai_coredisable not applying reset bits to BCMA_IOCTLHans de Goede
brcmfmac has been broken on my cubietruck with a BCM43362: brcmfmac: brcmf_chip_recognition: found AXI chip: BCM43362, rev=1 brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d since commit 53036261033: "brcmfmac: update core reset and disable routines". The problem is that since this commit brcmf_chip_ai_resetcore no longer sets BCMA_IOCTL itself before bringing the core out of reset, instead relying on brcmf_chip_ai_coredisable to do so. But brcmf_chip_ai_coredisable is a nop of the chip is already in reset. This patch modifies brcmf_chip_ai_coredisable to always set BCMA_IOCTL even if the core is already in reset. This fixes brcmfmac hanging in firmware loading on my board. Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-24ath9k: fix race in setting ATH_OP_INVALIDRajkumar Manoharan
The commit "ath9k: move sc_flags to ath_common" moved setting ATH_OP_INVALID flag below ieee80211_register_hw. This is causing the flag never being cleared randomly as the drv_start is called prior to setting flag. Fix this by setting the flag prior to register_hw. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-24can: slcan: Fix spinlock variantAlexander Stein
slc_xmit is called within softirq context and locks sl->lock, but slcan_write_wakeup is not softirq context, so we need to use spin_[un]lock_bh! Detected using kernel lock debugging mechanism. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 07:17:56 +0000