aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/bnxt_re
AgeCommit message (Collapse)Author
2019-01-02infiniband: bnxt_re: qplib: Check the return value of send_messageAditya Pakki
In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an error value but it is lost. Propagate this error to the callers. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA/bnxt_re: Increase depth of control path command queueDevesh Sharma
Increasing the depth of control path command queue to 8K entries to handle burst of commands. This feature needs support from FW and the driver/fw compatibility is checked from the interface version number. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA/bnxt_re: Query HWRM Interface version from FWSelvin Xavier
Get HWRM interface major, minor, build and patch version from FW for checking the FW/Driver compatibility. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA/bnxt_re: Make use of destroy AH sleepable flagGal Pressman
When in a sleepable (non-atomic) context, wait for firmware completion instead of polling for it. Signed-off-by: Gal Pressman <galpress@amazon.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA/bnxt_re: Make use of create AH sleepable flagGal Pressman
When in a sleepable (non-atomic) context, wait for firmware completion instead of polling for it. Signed-off-by: Gal Pressman <galpress@amazon.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Mark if destroy address handle is in a sleepable contextGal Pressman
Introduce a 'flags' field to destroy address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Mark if create address handle is in a sleepable contextGal Pressman
Introduce a 'flags' field to create address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA: Cleanup undesired pd->uobject usageShamir Rabinovitch
Drivers should be using udata to determine if a method is invoked from user space or kernel space. A pd does not necessarily say a different objects is kernel or user. Transforming the tests to use udata eliminates a large number of uobject references from the drivers. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/bnxt_re: Initialize ib_device_ops structKamal Heib
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21RDMA/bnxt_re: Avoid accessing the device structure after it is freedSelvin Xavier
When bnxt_re_ib_reg returns failure, the device structure gets freed. Driver tries to access the device pointer after it is freed. [ 4871.034744] Failed to register with netedev: 0xffffffa1 [ 4871.034765] infiniband (null): Failed to register with IB: 0xffffffea [ 4871.046430] ================================================================== [ 4871.046437] BUG: KASAN: use-after-free in bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046439] Write of size 4 at addr ffff880fa8406f48 by task kworker/u48:2/17813 [ 4871.046443] CPU: 20 PID: 17813 Comm: kworker/u48:2 Kdump: loaded Tainted: G B OE 4.20.0-rc1+ #42 [ 4871.046444] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 4871.046447] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 4871.046449] Call Trace: [ 4871.046454] dump_stack+0x91/0xeb [ 4871.046458] print_address_description+0x6a/0x2a0 [ 4871.046461] kasan_report+0x176/0x2d0 [ 4871.046463] ? bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046466] bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046470] process_one_work+0x216/0x5b0 [ 4871.046471] ? process_one_work+0x189/0x5b0 [ 4871.046475] worker_thread+0x4e/0x3d0 [ 4871.046479] kthread+0x10e/0x140 [ 4871.046480] ? process_one_work+0x5b0/0x5b0 [ 4871.046482] ? kthread_stop+0x220/0x220 [ 4871.046486] ret_from_fork+0x3a/0x50 [ 4871.046492] The buggy address belongs to the page: [ 4871.046494] page:ffffea003ea10180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 4871.046495] flags: 0x57ffffc0000000() [ 4871.046498] raw: 0057ffffc0000000 0000000000000000 ffffea003ea10188 0000000000000000 [ 4871.046500] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4871.046501] page dumped because: kasan: bad access detected Avoid accessing the device structure once it is freed. Fixes: 497158aa5f52 ("RDMA/bnxt_re: Fix the ib_reg failure cleanup") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21RDMA/bnxt_re: Fix system hang when registration with L2 driver failsSelvin Xavier
Driver doesn't release rtnl lock if registration with L2 driver (bnxt_re_register_netdev) fais and this causes hang while requesting for the next lock. [ 371.635416] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 371.635417] kworker/u48:1 D 0 634 2 0x80000000 [ 371.635423] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 371.635424] Call Trace: [ 371.635426] ? __schedule+0x36b/0xbd0 [ 371.635429] schedule+0x39/0x90 [ 371.635430] schedule_preempt_disabled+0x11/0x20 [ 371.635431] __mutex_lock+0x45b/0x9c0 [ 371.635433] ? __mutex_lock+0x16d/0x9c0 [ 371.635435] ? bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635438] ? wake_up_klogd+0x37/0x40 [ 371.635442] bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635447] bnxt_re_task+0xfd/0x180 [bnxt_re] [ 371.635449] process_one_work+0x216/0x5b0 [ 371.635450] ? process_one_work+0x189/0x5b0 [ 371.635453] worker_thread+0x4e/0x3d0 [ 371.635455] kthread+0x10e/0x140 [ 371.635456] ? process_one_work+0x5b0/0x5b0 [ 371.635458] ? kthread_stop+0x220/0x220 [ 371.635460] ret_from_fork+0x3a/0x50 [ 371.635477] INFO: task NetworkManager:1228 blocked for more than 120 seconds. [ 371.635478] Tainted: G B OE 4.20.0-rc1+ #42 [ 371.635479] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Release the rtnl_lock correctly in the failure path. Fixes: de5c95d0f518 ("RDMA/bnxt_re: Fix system crash during RDMA resource initialization") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-17RDMA/drivers: Use core provided API for registering device attributesParav Pandit
Use rdma_set_device_sysfs_group() to register device attributes and simplify the driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Avoid resource leak in case the NQ registration failsSelvin Xavier
In case the NQ alloc/enable fails, free up the already allocated/enabled NQ before reporting failure. Also, track the alloc/enable using proper state checking. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Wait for delayed work to finish before device removalSelvin Xavier
Delayed work bnxt_re_worker would be still running even after cancel_delayed_work returns. This causes crash as the driver proceeds with device removal. To make sure that the work is finished before returning, use cancel_delayed_work_sync. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Limit max_pkey to 16 bit valueDevesh Sharma
Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Fix qp async event reportingDevesh Sharma
Reports affiliated async event on the qp-async event channel instead of global event channel. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Report out of sequence hw countersSelvin Xavier
Expose out of sequence errors received from FW. This counter is a 32 bit counter and driver has to accumulate the counter. Stores the previous value for calculating the difference in the next query. Also, update the HW statistics structure with new fields. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Expose rx discards and drop countersSelvin Xavier
Expose the RoCE discard and drop counters from the HW statistics context Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Prevent driver crash due to NULL pointer in error message printSomnath Kotur
crsqe->resp would be NULL in case the host command timed out before getting a response from HW. Check for NULL pointer to avoid a potential crash while printing the error message. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Drop L2 async events silentlyDevesh Sharma
In some FW versions, RoCE driver also receives an async notification which was directed to L2 driver. RoCE driver does not handle this and print a message to syslog. Drop these notifications silently. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Avoid accessing nq->bar_reg_iomem in failure caseSelvin Xavier
In the failure path, nq->bar_reg_iomem gets accessed without initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the initialization is complete. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Avoid NULL check after accessing the pointerSelvin Xavier
This is reported by smatch check. rcfw->creq_bar_reg_iomem is accessed in bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make sense. Also, rcfw->creq_bar_reg_iomem will never be NULL. So Removing this check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Remove the unnecessary version macro definitionSelvin Xavier
Version macro is not required as the driver is not maintaining the version. Removing the references of this macro too. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Fix recursive lock warning in debug kernelSelvin Xavier
Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ #33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Add missing spin lock initializationSelvin Xavier
Add the missing initalization of the cq_lock and qplib.flush_lock. Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16Merge branch 'for-rc' into rdma.git for-nextJason Gunthorpe
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git This is required to resolve dependencies of the next series of RDMA patches. The code motion conflicts in drivers/infiniband/core/cache.c were resolved. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03RDMA: Remove unused parameter from ib_modify_qp_is_ok()Kamal Heib
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA: Fully setup the device name in ib_register_deviceJason Gunthorpe
The current code has two copies of the device name, ibdev->dev and dev_name(&ibdev->dev), and they are setup at different times, which is very confusing. Set them both up at the same time and make dev_name() the lead name, which is the proper use of the driver core APIs. To make it very clear that the name is not valid until registration pass it in to the ib_register_device() call rather than messing with ibdev->name directly. Also the reorganization now checks that dev_name is unique even if it does not contain a %. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
2018-09-24RDMA/bnxt_re: Fix system crash during RDMA resource initializationSelvin Xavier
bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05Merge branch 'uverbs_dev_cleanups' into rdma.git for-nextJason Gunthorpe
For dependencies, branch based on rdma.git 'for-rc' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/ Pull 'uverbs_dev_cleanups' from Leon Romanovsky: ==================== Reuse the char device code interfaces to simplify ib_uverbs_device creation and destruction. As part of this series, we are sending fix to cleanup path, which was discovered during internal review, The fix definitely can go to -rc, but it means that this series will be dependent on rdma-rc. ==================== * branch 'uverbs_dev_cleanups': RDMA/uverbs: Use device.groups to initialize device attributes RDMA/uverbs: Use cdev_device_add() instead of cdev_add() RDMA/core: Depend on device_add() to add device attributes RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one() Resolved conflict in ib_device_unregister_sysfs() Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05bnxt_re: Fix couple of memory leaks that could lead to IOMMU call tracesSomnath Kotur
1. DMA-able memory allocated for Shadow QP was not being freed. 2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was erroneously pointing to the RQ. But since the corresponding free_qp_hdr_buf() was correct, memory being free was less than what was allocated. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05RDMA/bnxt_re: QPLIB: Add and use #define dev_fmt(fmt) "QPLIB: " fmtJoe Perches
Consistently use the "QPLIB: " prefix for dev_<level> logging. Miscellanea: o Add missing newlines to avoid possible message interleaving o Coalesce consecutive dev_<level> uses that emit a message header to avoid < 80 column lengths and mistakenly output on multiple lines o Reflow modified lines to use 80 columns where appropriate o Consistently use "%s: " where __func__ is output o QPLIB: is now always output immediately after the dev_<level> header Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA/providers: Fix return value from create_srq callbacksKamal Heib
The proper return code is "-EOPNOTSUPP" when the create_srq() callback is not supported. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA: Constify the argument of the work request conversion functionsBart Van Assche
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-23RDMA/bnxt_re: Modify a fall-through annotationBart Van Assche
This patch avoids that gcc reports the following warning when building with W=1: drivers/infiniband/hw/bnxt_re/ib_verbs.c:2404:4: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-10RDMA: Fix storage of PortInfo CapabilityMask in the kernelJason Gunthorpe
The internal flag IP_BASED_GIDS was added to a field that was being used to hold the port Info CapabilityMask without considering the effects this will have. Since most drivers just use the value from the HW MAD it means IP_BASED_GIDS will also become set on any HW that sets the IBA flag IsOtherLocalChangesNoticeSupported - which is not intended. Fix this by keeping port_cap_flags only for the IBA CapabilityMask value and store unrelated flags externally. Move the bit definitions for this to ib_mad.h to make it clear what is happening. To keep the uAPI unchanged define a new set of flags in the uapi header that are only used by ib_uverbs_query_port_resp.port_cap_flags which match the current flags supported in rdma-core, and the values exposed by the current kernel. Fixes: b4a26a27287a ("IB: Report using RoCE IP based gids in port caps") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-07-04RDMA/bnxt_re: Fix a bunch of off by one bugs in qplib_fp.cDan Carpenter
The srq->swq[] is allocated in bnxt_qplib_create_srq(). It has srq->hwq.max_elements elements so these tests should be > instead of >= or we might go beyond the end of the array. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-04RDMA/bnxt_re: Fix a couple off by one bugsDan Carpenter
The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl(). It has sgid_tbl->max elements. So the > should be >= to prevent accessing one element beyond the end of the array. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18RDMA: Convert drivers to use the AH's sgid_attr in post_wr pathsParav Pandit
For UD the drivers were doing a sgid_index lookup into the cache to get the attrs, however we can now directly access the same attrs stores in the ib_ah instead and remove the lookup. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18RDMA: Convert drivers to use sgid_attr instead of sgid_indexParav Pandit
The core code now ensures that all driver callbacks that receive an rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present. Drivers can use this pointer instead of calling a query function with sgid_index. This simplifies the drivers and also avoids races where a gid_index lookup may return different data if it is changed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18RDMA: Use GID from the ib_gid_attr during the add_gid() callbackParav Pandit
Now that ib_gid_attr contains the GID, make use of that in the add_gid() callback functions for the provider drivers to simplify the add_gid() implementations. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-25RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changesDevesh Sharma
The recent changes in Broadcom's ethernet driver(L2 driver) broke RoCE functionality in terms of MSIx vector allocation and de-allocation. There is a possibility that L2 driver would initiate MSIx vector reallocation depending upon the requests coming from administrator. In such cases L2 driver needs to free up all the MSIx vectors allocated previously and reallocate/initialize those. If RoCE driver is loaded and reshuffling is attempted, there will be kernel crashes because RoCE driver would still be holding the MSIx vectors but L2 driver would attempt to free in-use vectors. Thus leading to a kernel crash. Making changes in roce driver to fix crashes described above. As part of solution L2 driver tells RoCE driver to release the MSIx vector whenever there is a need. When RoCE driver get message it sync up with all the running tasklets and IRQ handlers and releases the vectors. L2 driver send one more message to RoCE driver to resume the MSIx vectors. L2 driver guarantees that RoCE vector do not change during reshuffling. Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.") Fixes: 08654eb213a8 ("bnxt_en: Change IRQ assignment for RDMA driver.") Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03RDMA: Use ib_gid_attr during GID modificationParav Pandit
Now that ib_gid_attr contains device, port and index, simplify the provider APIs add_gid() and del_gid() to use device, port and index fields from the ib_gid_attr attributes structure. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03IB/providers: Avoid null netdev check for RoCEParav Pandit
Now that IB core GID cache ensures that all RoCE entries have an associated netdev remove null checks from the provider drivers for clarity. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03RDMA/providers: Simplify query_gid callback of RoCE providersParav Pandit
ib_query_gid() fetches the GID from the software cache maintained in ib_core for RoCE ports. Therefore, simplify the provider drivers for RoCE to treat query_gid() callback as never called for RoCE, and only require non-RoCE devices to implement it. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Extend uverbs_ioctl header with driver_idMatan Barak
Extending uverbs_ioctl header with driver_id and another reserved field. driver_id should be used in order to identify the driver. Since every driver could have its own parsing tree, this is necessary for strace support. Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB support and thus we add some reserved fields for future usage. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-14Merge branch 'k.o/wip/dl-for-rc' into k.o/wip/dl-for-nextDoug Ledford
Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masksArnd Bergmann
On 32-bit targets, we otherwise get a warning about an impossible constant integer expression: In file included from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device': include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow] #define BIT(nr) (1UL << (nr)) ^~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT' #define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39) ^~~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH' #define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE' ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE; ^~~~~~~~~~~~~~~~~~~ Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 16:26:41 +0000