aboutsummaryrefslogtreecommitdiff
path: root/drivers/iio/accel
AgeCommit message (Collapse)Author
2019-04-04iio: cros_ec: Switch to SPDX identifier.Enric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Also fix MODULE_LICENSE for cros_ec_accel_legacy to match the SPDX and boiler plate license. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: cros_ec: Drop unnecessary include filesGuenter Roeck
The cros_ec sensors drivers do not call any sysfs functions or use any sysfs defines, and thus do not need to include linux/sysfs.h. Also, some cros_ec drivers include linux/delay.h and is not used. Signed-off-by: Guenter Roeck <groeck@chromium.org> [remove linux/delay.h] Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04drivers: iio: Kconfig: pedantic cleanupEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: accel: kxcjk1013: Add device tree supportRobert Yang
Add device tree support for kxcjk-1013 accelerometer sensors. Signed-off-by: Robert Yang <decatf@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probeGustavo A. R. Silva
Refactor some code in order to fix both the technical implementation and the following warnings: drivers/iio/accel/cros_ec_accel_legacy.c: In function ‘cros_ec_accel_legacy_probe’: drivers/iio/accel/cros_ec_accel_legacy.c:387:36: warning: this statement may fall through [-Wimplicit-fallthrough=] ec_accel_channels[X].scan_index = Y; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ drivers/iio/accel/cros_ec_accel_legacy.c:388:3: note: here case Y: ^~~~ drivers/iio/accel/cros_ec_accel_legacy.c:389:36: warning: this statement may fall through [-Wimplicit-fallthrough=] ec_accel_channels[Y].scan_index = X; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ drivers/iio/accel/cros_ec_accel_legacy.c:390:3: note: here case Z: ^~~~ Notice that neither the for loop nor the switch statement is needed. Also, "state->sign[Y] = 1" should be unconditional. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: st_accel: remove redundant unsigned less than zero checkColin Ian King
The check that variable val is less than zero is redundant since val is an unsigned int and hence can never be less than zero. Remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: accel: bma180: add mount matrix supportH. Nikolaus Schaller
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: accel: bmc150: add mount matrix supportH. Nikolaus Schaller
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: Allow to read mount matrix from ACPIAndy Shevchenko
Currently mount matrix is allowed in Device Tree, though there is no technical issue to extend it to support ACPI. Convert the function to use device_property_read_string_array() and thus allow to read mount matrix from ACPI if available. Example of use in _DSD method: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mount-matrix", Package() { "1", "0", "0", "0", "0.866", "0.5", "0", "-0.5", "0.866", } }, } }) At the same time drop the "of" prefix from its name and convert current users. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: mma8452: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/iio/accel/mma8452.c: In function ‘mma8452_probe’: drivers/iio/accel/mma8452.c:1581:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ret == data->chip_info->chip_id) ^ drivers/iio/accel/mma8452.c:1584:2: note: here default: ^~~~~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-09iio:accel:adxl345: Change alignment to match paranthesisLuciana da Costa Marques
Align broken line to match upper line parenthesis. Solves the checkpatch.pl's message: CHECK: Alignment should match open parenthesis Signed-off-by: Luciana da Costa Marques <lucianadacostamarques@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02iio: st_accel: use ACPI orientation dataDaniel Drake
Platform-specific ST accelerometer mount matrix information can be provided by returning a package of 6 integers from the ACPI _ONT method. This has been seen on Acer products such as Veriton Z4860G, Z6860G and A890, which include a ST SMO8840 sensor. We have also confirmed experimentally that the Windows driver uses such information. The _ONT data format was explained by a ST vendor contact. However, strangely enough, the _ONT transformations must be applied after first applying another mount matrix which we determined experimentally. ST have not commented on why this is the case, but we imagine that perhaps earlier devices (before _ONT was introduced) required this translation and hence it became 'standard.' Interpret the _ONT data and export the equivalent mount matrix to userspace. If no _ONT data is present, no mount matrix is exported. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-12iio: accell: mma8452: add vdd/vddio regulator operation supportAnson Huang
The accelerometer's power supply could be controllable on some platforms, such as i.MX6Q-SABRESD board, the mma8451's power supplies are controlled by a GPIO fixed regulator, need to make sure the regulators are enabled before any communication with mma8451, this patch adds vdd/vddio regulator operation support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-13Merge tag 'iio-for-4.21b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanups for the 4.21 cycle. Staging graduation * ad2s90 - Driver for this resolver to digital chip. New drivers and device support. * ad5686 - Add support for ad5310r DAC and associated fix in value read back. * exynos-adc - Support for S5PV210 which is slightly different from other parts. * mcp41010 - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and MCP42100 microchip potentiometers. New ACPI ids. * ak8975 - AKM9911 ACPI HID. * kxcjk-1013 - KXJ2109 ACPI HID. - KIOX010A ACPI HID. New features * ad5933 - Explicit DT binding. * ad2s90 - Explicit DT binding including dropping spi setup that is done via dt in favour of verifying the settings form DT. * adt7316 - Explicit DT binding and support for gpio, irq_flags etc. * stm32-adc - Runtime power management. Minor fixes and cleanups * core - Protect against missing info structure. * ad2s90 - SPDX - Add documentation fo the mutex. * ad7280a - Check allocation failure. - Fix an accidental replacement of an error return. * adt7316 - Switch some variables to be local and rename for consistency with other drivers. - Revert a false handling of 0 as an error introduced earlier this cycle. * bmi160 - Use devm functions throughout probe() to avoid need for remove(). * hid-sensor-hub - White space cleanup. * hts221 - MAINTAINERS entry. * lis302 - Use generic name in the DT binding doc. * Messon-saradc - Check for allocation error. - Fix some presented clock names that break clk debugfs. * qcom-spmi-adc - A fix for initialization of the prescale property. Came late in the cycle, so merge window is probably the best route for this. * st_lsm6dsx - Allow for variable read length to support wider range of slave devices. * tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits) iio: adc: qcom-spmi-adc5: Initialize prescale properly dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant iio: adc: Allow selection of Exynos ADC on S5PV210 iio: adc: exynos-adc: Add S5PV210 variant iio: bmi160: use all devm functions in probe iio: dac: ad5686: fix bit shift read register iio:dac:ad5686: Add AD5310R support Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0" dt-bindings: iio: accel: use a generic node name for lis302 iio: core: check 'info' value before registering the device staging: iio: adc: ad7280a: fix overwrite of the returned value staging: iio: adc: ad7280a: check for devm_kasprint() failure iio: humidity: hts221: add entry in MAINTAINERS file iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID staging:iio:ad2s90: Move out of staging staging:iio:ad2s90: Add comment to device state mutex staging:iio:ad2s90: Replace license text w/ SPDX identifier dt-bindings:iio:resolver: Add docs for ad2s90 staging:iio:ad2s90: Add max frequency check at probe staging:iio:ad2s90: Remove spi setup that should be done via dt ...
2018-12-03Merge 4.20-rc5 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-25iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-IDHans de Goede
Various 2-in-1's use KIOX010A and KIOX020A as HIDs for 2 KXCJ91008 accelerometers. The KIOX010A HID is for the one in the base and the KIOX020A for the accelerometer in the keyboard. Since userspace does not have a way yet to deal with (or ignore) the accelerometer in the keyboard, this commit just adds the KIOX010A HID for now so that display rotation will work. Related: https://github.com/hadess/iio-sensor-proxy/issues/166 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-25iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HIDStephan Gerhold
This HID is used on the ASUS MeMO Pad 7 (ME176C) tablet. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio: st-accel: add support for lis3deHeiko Stuebner
This commit add support for STMicroelectronics lis3de accelerometer. Datasheet for this device can be found here: https://www.st.com/resource/en/datasheet/lis3de.pdf Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-10-14iio: accel: kxcjk1013: Add KIOX0009 ACPI Hardware-IDHans de Goede
Add KIOX0009 ACPI HID, this is used e.g. on the Acer One 10. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: adxl372: Add support for I2C communicationStefan Popa
The adxl372 is designed to communicate in either SPI or I2C protocol. It autodetects the format being used, requiring no configuration control to select the format. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: adxl372: Refactor the driverStefan Popa
This patch restructures the existing adxl372 driver by adding a module for SPI and a header file, while the baseline module deals with the chip-logic. This is a necessary step, as this driver should support in the future a similar device which differs only in the type of interface used (I2C instead of SPI). Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio:adxl372: Add filter bandwidth supportStefan Popa
This patch adds the option for the user to select the filter bandwidth. The user can also read the available bandwidths which are always adjusted to be at most half of the sampling frequency. Furthermore, the currently selected bandwidth can be read via the read_raw function, while the write_raw sets a new bandwidth value. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio:adxl372: Add sampling frequency supportStefan Popa
This patch adds the option for the user to select the sampling frequency. Also, the user can read the available frequencies and read the currently set frequency via the read_raw function. The frequency can be set via the write_raw function. When the frequency is set, the bandwidth is also checked and ensured that it is constrained to at most half of the sampling frequency. Also, the activity and inactivity timers have to be updated because they depend on the selected ODR. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio: adxl372: Provide validate_trigger and validate_device callbacksStefan Popa
This patch provides a validate_device callback for the trigger which makes sure that other devices are rejected. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adxl345: move null check for i2c id at start of probeAlexandru Ardelean
Fixes ef89f4b96a2 ("iio: adxl345: Add support for the ADXL375"). This was found via static checker. After looking into the code a bit, it's unlikely that there will be a NULL dereference if the `id` object in that specific code path. However, it's safe to add a NULL (paranoid) check just to make sure and remove any uncertainties. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio:adxl372: Add FIFO and interrupts supportStefan Popa
This patch adds support for the adxl372 FIFO. In order to accomplish this, triggered buffers were used. The number of FIFO samples which trigger the watermark interrupt can be configured by using the buffer watermark. The FIFO format is determined by configuring the scan elements for each axis. The FIFO data is pushed to the IIO device's buffer. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adxl372: New driver for Analog Devices ADXL372 AccelerometerStefan Popa
This patch adds basic support for Analog Devices ADXL372 SPI-Bus Three-Axis Digital Accelerometer. The device is probed and configured the with some initial default values. With this basic driver, it is possible to read raw acceleration data. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-25Merge tag 'iio-for-4.19b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanups. There are also a couple of fixes that can wait for the coming merge window. Core new features * Support for phase channels (used in time of flight sensors amongst other things) * Support for deep UV light channel modifier. New Device Support * AD4758 DAC - New driver and dt bindings. * adxl345 - Support the adxl375 +-200g part which is register compatible. * isl29501 Time of flight sensor. - New driver * meson-saradc - Support the Meson8m2 Socs - right now this is just an ID, but there will be additional difference in future. * mpu6050 - New ID for 6515 variant. * si1133 UV sensor. - New driver * Spreadtrum SC27xx PMIC ADC - New driver and dt bindings. Features * adxl345 - Add calibration offset readback and writing. - Add sampling frequency control. Fixes and Cleanups * ad5933 - Use a macro for the channel definition to reduce duplication. * ad9523 - Replace use of core mlock with a local lock. Part of ongoing efforts to avoid confusing the purpose of mlock which is only about iio core state changes. - Fix displayed phase which was out by a factor of 10. * adxl345 - Add a link to the datasheet. - Rework the use of the address field in the chan_spec structures to allow addition of more per channel information. * adis imu - Mark switch fall throughs. * at91-sama5d2 - Fix some casting on big endian systems. * bmp280 - Drop some DT elements that aren't used and should mostly be done from userspace rather than in DT. * hx711 - add clock-frequency dt binding and resulting delay to deal with capacitance issue on some boards. - fix a spurious unit-address in the example. * ina2xx - Avoid a possible kthread_stop with a stale task_struct. * ltc2632 - Remove some unused local variables (assigned but value never used). * max1363 - Use device_get_match_data to remove some boilerplate. * mma8452 - Mark switch fall throughs. * sca3000 - Fix a missing return in a switch statement (a bad fallthrough previously!) * sigma-delta-modulator - Drop incorrect unit address from the DT example. * st_accel - Use device_get_match_data to drop some boiler plate. - Move to probe_new for i2c driver as second parameter not used. * st_sensors library - Use a strlcpy (safe in this case). * st_lsm6dsx - Add some error logging. * ti-ads7950 - SPDX - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms EV3 where some channels are used for power supply monitoring at a very low rate. * ti-dac5571 - Remove an unused variable. * xadc - Drop some dead code.
2018-07-24iio: sca3000: Fix missing return in switchGustavo A. R. Silva
The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a return and will fall through to the default case and errorenously return -EINVAL. Fix this by adding in missing *return ret*. Fixes: 626f971b5b07 ("staging:iio:accel:sca3000 Add write support to the low pass filter control") Reported-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-15iio: adxl345: Add support for the ADXL375Lars-Peter Clausen
The ADXL375 is fully register map compatible to the ADXL345 (including the device ID register returning the same value ...). The only difference is the resolution of the acceleration sensor. The ADXL375 can measure up to +-200g of acceleration. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL375.PDF Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-15iio: accel: adxl345: add sampling frequency supportAkinobu Mita
The ADXL345 provides selectable output data rate. This adds the iio channel information for the sampling frequency with that feature. Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-07iio: mma8452: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used in this case: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-07IIO: st_accel_i2c.c: Use probe_new() instead of probe()Nikolaus Voss
struct i2c_device_id argument of probe() is not used, so use probe_new() instead. Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-07IIO: st_accel_i2c.c: Simplify access to driver dataNikolaus Voss
Use device_get_match_data API to simplify access to driver data. Let acpi_device_id table entries point to the same driver data as of_device_id table entries and uniquify access to driver data by using device_get_match_data API. Remove unused i2c_device_id .driver_data fields. Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-30iio: accel: adxl345: add calibration offset supportAkinobu Mita
The ADXL345 provides the offset adjustment registers for each axis. This adds the iio channel information for the calibraion offsets with that feature. Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-30iio: accel: adxl345: convert address field usage in iio_chan_specAkinobu Mita
Currently the address field in iio_chan_spec is filled with an accel data register address for the corresponding axis. In preparation for adding calibration offset support, this sets the address field to the index of accel data registers instead of the actual register address. This change makes it easier to access both accel registers and calibration offset registers with fewer lines of code as these are located in X-axis, Y-axis, Z-axis order. Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-30iio: accel: adxl345: add link to datasheetAkinobu Mita
Add a link to the ADXL345 datasheet Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24iio: mma8452: Fix ignoring MMA8452_INT_DRDYLeonard Crestez
Interrupts are ignored if no event bit is set in the status status register and this breaks the buffer interface. No data is shown when running "iio_generic_buffer -n mma8451 -a" and interrupt counts go crazy. Fix by not returning IRQ_NONE if DRDY is set. Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle multiple events") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-12iio: accell: mma8452: Reduce sleep time when data not readyRichard Tresidder
Modified the sleep method when data is not ready to allow for sampling > 50sps to work. Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-11Merge tag 'iio-for-4.18a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st round of IIO new device support, features and cleanup for the 4.18 cycle A nice mix this time of excellent cleanups (many to send drivers speeding toward staging graduations) and new drivers / device support. A good part of this is Brian Masney's never ending task on the tsl2x7x driver. The end is in sight so hopefully we'll get that one out of staging very soon! New device support * AD5686 - Support AD5685R (was wrongly present as AD5685) - Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel SPI DACs with various precisions. - Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R I2C DACs with various percisions and numbers of channels. * Analog front end rescale driver - New driver. - Support current sensing usings a shunt resistor. - Support simple voltage dividers. - support simple current sense amplifiers. * TI dac5571 - New driver and device bindings supporting: dac5571, dac6571, dac7571, dac5574, dac6574, dac7574, dac5573, dac6573 and dac7573 * Meson-adc - Support for Meson AXG with DT bindings. * mpu6050 - Support the mpu9255 which only requires additional WHOAMI entry and compatible string. * st_lsm6dsx - Support for lsm330dlc combinded accelerometer and gyro sensors with DT bindings. * stm32_adc - Add support for STM32MP1 with bindings. Staging graduations * adis16201 after some excelent cleanup by Himanshu Jha. * adis16029 after some excelent cleanup by Shreeya Patel. New features: * ABI docs - Add core ABI docs for angle channels. * inv_mpu6050 - Provide support for the full range of interrupts the device supports. * st_accel - Add SMO8840 ACPI ID seen in the wild on some Lenovo machines. * stx104 - Provide a multiple gpio get function. Cleanups / Minor fixes * core - Use new nested structure support to improve kernel-doc. * ad2s1200 - Use be16_to_cpup instead of opencoding. * ad5686 - Indentation tidy up. - Switch to SPDX - Refactor to allow various numbers of channels. - Refactor to separate core and SPI specific support, prior to addition of i2c equivalent devices. * ad7606 - Use drvdata directly from device rather than boucing via the platform_device structure. * ad7746 - Replace opencoded byte swapped i2c calls with _swapped variants. - White space and line break readability improvements. - Reorder includes and variable declarations where appropriate. * ad7791 - Changes to the AD ADC library used by this driver took in the sampling frequency. This lead to be the wrong path being the one tied to the resulting attribute, so it didn't work, and a warning to be printed. * ad7780 - Remove apparent support for sampling frequency control on devices that don't support changing the sampling attributes. * ade7854 - Fix a read of the wrong number of bits. - Improve error handling on i2c read/write errors. - Rework i2c and spi code to reduce duplication. * adis16201 (staging) - Improve meaning inherent in some macro names by adding units etc where relevant. - Adjust comments to improve detail and drop the irrelevant. - Rename register address definitions definitions to add a _REG postfix, clearly separating them from field definitions. Reorganize the definitions to group register address and fields. - Use sign_extend32 rather than open coding. - Reverse Xmas tree ordering where appropriate and align function args. - Remove unused headers. - Use GENMASK where appropriate instead of open coding. * adis16209 (staging) - Indent field definitions to visually separate them from register address definitions. - Use reverse xmas tree ordering where appropriate. - Add some whitespace where it will help readability. - Drop some unused headers. - Use GENMASK where appropriate. * ad2s1200 - Drop unnecessary includes and reorder alphabetically. - Reverse xmas tree and blank line cleanups. * atlas-ph-sensor - Use msleep instead of usleep_range where the precise value doesn't matter and the delays are long. * bcm150 - Drop transaction splitting as core now handles it. * cros_ec - Move the shared header to the include/iio/common directory. This brings it inline with the other multiple type devices. - Use drvdata directly from device rather than boucing via the platform_device structure. * hid-sensors - Use drvdata directly from device rather than boucing via the platform_device structure. * inv_mpu6050 - Clear out a second function definition for the same function. - Don't flush fifo when the iio buffer is full but just drop excess data. - Tidy up set_power_itg and ensure it is used in the right places. - Use set_power_itg rather than opencoding it again in the i2c mux control. - Make sure error paths disable the power if undoing power on. - Used managed devm_ functions during probe. Delete remove function. - Refactor to pull raw data read out of read_raw function. - Simplify data reading error paths. - Only enable the i2c mux for chips with the i2c aux bus (not icm20608) - Fix a potential deadlock due to varying lock ordering. - Fix an issue where first sample from gyro after enabling is unstable by dropping the first sample. - Fix an issue where the user_ctrl register is incorrectly overwritten. - Tidy up some grammar and spelling minor issus. * mcp320x - Use vendor compatible strings. * mcp4018 - Switch to using i2c .probe_new. * mcp4351 - switch to using i2c .probe_new. * meson-adc - rework handing on common ADC platform data so it can be shared across multiple families of SoCs. * sca3000 - Fix an error handling path if the ring configure fails. * st_lsm6dsx - Fix a wrong fifo threshold mask (no actual effect) * stm32-dfsdm - Style fixes and cleanups. - Check filter ID is in range and check spi-max-frequency. * tsl2x7x (staging) - Drop some unnecessary function calls, unused variables and unnecessary local variables. - Fix wrong interrupt type. - Avoid unnecessary double clear of interrupt. - Simplify proximity calibration call which did various things unrelated to actually calibrating. - Separate control of the proximity and ALS interrupts. - Improve consistency of logging. - Separate ALS and proximity persistence settings as they have separate hardware controls. - Tidy up variable ordering. - Add Brian to copyright notice given consider work on this driver. - Take advantage of hardware support for I2C address auto increment. - Combine individuaal enable and period attributes for the two directions on the threshold events into a single value as the hardware doesn't separate them. - Move integration_time* attributes from light channel to intensity value as they effect the intensity readings directly and the light reading only indirectly. Hence this better reflects reality. Also move the calibscale_available. - Avoid returning an error in the IRQ handler. - Hard code the reg value in _clear_interrupts as it only takes one value in the code. Result is the function has little purpose so opencode the two remaining i2c_smbus_write_byte calls. - Drop some unnecessary checking of the chip status register. - Tidy up return path in _write_interrupt_config. - Tidy up the ID verification code. - Move the power and diode settings defines into the header as these are needed for platform data configuration. - Various renames and comment cleanups for consistency and clarity. - Use actual device defaults for default startup settings. - SPDX - Add some range sanity checking to sysfs attribute writes. - Don't provide event interfaces if the interrupt line isn't available. - Use IIO_CONST_ATTR macro for calibscale_available as it's a constant string. - Fix the integration time and lux equations. - Make device IDs explicit index values in the device_channel_config array.
2018-04-28iio: accel: bcm150: Remove handling for regmap raw_read_maxCharles Keepax
The regmap core now handles splitting up transactions according to max_raw_read, so this code is no longer required in client drivers. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-21iio: accel: st_accel: Add support for the SMO8840 ACPI idHans de Goede
The Lenovo Ideapad Miix 320 uses an st accelerometer with an ACPI id of SMO8840, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in ↵Christophe JAILLET
'sca3000_probe()' 'sca3000_configure_ring()' can fail, so test its return value and propagate it if needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15iio: sca3000: Fix an error handling path in 'sca3000_probe()'Christophe JAILLET
Use 'devm_iio_kfifo_allocate()' instead of 'iio_kfifo_allocate()' in order to simplify code and avoid a memory leak in an error path in 'sca3000_probe()'. A call to 'sca3000_unconfigure_ring()' was missing. Sent via the next merge window as unimportant bug and there are other patches dependent on it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-30Staging: iio: adis16209: Move adis16209 driver out of stagingShreeya Patel
Move the adis16209 driver out of staging directory and merge to the mainline IIO subsystem. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-28Merge 4.16-rc7 into staging-nextGreg Kroah-Hartman
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24Staging: iio: accel: adis16201: Move adis16201 driver out of stagingHimanshu Jha
Move adis16201 driver out of staging and merge into mainline IIO subsystem. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10iio: st_pressure: st_accel: pass correct platform data to initMichael Nosthoff
Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff <committed@heine.so> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10Revert "iio: accel: st_accel: remove redundant pointer pdata"Jonathan Cameron
This reverts commit 585ed27d06151f98e39238298f43ee261314ae74. This removed code which was unused due to a bug in commit 7383d44b. To fix this bug the code is needed. Thus this revert. Signed-off-by: Michael Nosthoff <committed@heine.so> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 07:49:32 +0000