aboutsummaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2021-01-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ...
2020-12-29block: add debugfs stanza for QUEUE_FLAG_NOWAITAndres Freund
This was missed in 021a24460dc2. Leads to the numeric value of QUEUE_FLAG_NOWAIT (i.e. 29) showing up in /sys/kernel/debug/block/*/state. Fixes: 021a24460dc28e7412aecfae89f60e1847e685c0 Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-22block: update some copyrightsChristoph Hellwig
Update copyrights for files that have gotten some major rewrites lately. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17blk-mq: Don't complete on a remote CPU in force threaded modeSebastian Andrzej Siewior
With force threaded interrupts enabled, raising softirq from an SMP function call will always result in waking the ksoftirqd thread. This is not optimal given that the thread runs at SCHED_OTHER priority. Completing the request in hard IRQ-context on PREEMPT_RT (which enforces the force threaded mode) is bad because the completion handler may acquire sleeping locks which violate the locking context. Disable request completing on a remote CPU in force threaded mode. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17blk-iocost: Add iocg idle state tracepointBaolin Wang
It will be helpful to trace the iocg's whole state, including active and idle state. And we can easily expand the original iocost_iocg_activate trace event to support a state trace class, including active and idle state tracing. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-16blk-mq: Remove 'running from the wrong CPU' warningDaniel Wagner
It's guaranteed that no request is in flight when a hctx is going offline. This warning is only triggered when the wq's CPU is hot plugged and the blk-mq is not synced up yet. As this state is temporary and the request is still processed correctly, better remove the warning as this is the fast path. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ...
2020-12-16Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-16Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...
2020-12-14Merge tag 'sched-core-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
2020-12-12blk-mq: fix msec comment from micro to milli secondsMinwoo Im
Delay to wait for queue running is milli second unit which is passed to delayed work via msecs_to_jiffies() which is to convert milliseconds to jiffies. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-12blk-mq: update arg in comment of blk_mq_map_queueMinwoo Im
Update mis-named argument description of blk_mq_map_queue(). This patch also updates description that argument to software queue percpu context. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-12blk-mq: add helper allocating tagset->tagsMinwoo Im
tagset->set is allocated from blk_mq_alloc_tag_set() rather than being reallocated. This patch added a helper to make its meaning explicitly which is to allocate rather than to reallocate. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-09scsi: block: Do not accept any requests while suspendedAlan Stern
blk_queue_enter() accepts BLK_MQ_REQ_PM requests independent of the runtime power management state. Now that SCSI domain validation no longer depends on this behavior, modify the behavior of blk_queue_enter() as follows: - Do not accept any requests while suspended. - Only process power management requests while suspending or resuming. Submitting BLK_MQ_REQ_PM requests to a device that is runtime suspended causes runtime-suspended devices not to resume as they should. The request which should cause a runtime resume instead gets issued directly, without resuming the device first. Of course the device can't handle it properly, the I/O fails, and the device remains suspended. The problem is fixed by checking that the queue's runtime-PM status isn't RPM_SUSPENDED before allowing a request to be issued, and queuing a runtime-resume request if it is. In particular, the inline blk_pm_request_resume() routine is renamed blk_pm_resume_queue() and the code is unified by merging the surrounding checks into the routine. If the queue isn't set up for runtime PM, or there currently is no restriction on allowed requests, the request is allowed. Likewise if the BLK_MQ_REQ_PM flag is set and the status isn't RPM_SUSPENDED. Otherwise a runtime resume is queued and the request is blocked until conditions are more suitable. [ bvanassche: modified commit message and removed Cc: stable because without the previous patches from this series this patch would break parallel SCSI domain validation + introduced queue_rpm_status() ] Link: https://lore.kernel.org/r/20201209052951.16136-9-bvanassche@acm.org Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-and-tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPTBart Van Assche
Remove flag RQF_PREEMPT and BLK_MQ_REQ_PREEMPT since these are no longer used by any kernel code. Link: https://lore.kernel.org/r/20201209052951.16136-8-bvanassche@acm.org Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: block: Introduce BLK_MQ_REQ_PMBart Van Assche
Introduce the BLK_MQ_REQ_PM flag. This flag makes the request allocation functions set RQF_PM. This is the first step towards removing BLK_MQ_REQ_PREEMPT. Link: https://lore.kernel.org/r/20201209052951.16136-3-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Can Guo <cang@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: block: Fix a race in the runtime power management codeBart Van Assche
With the current implementation the following race can happen: * blk_pre_runtime_suspend() calls blk_freeze_queue_start() and blk_mq_unfreeze_queue(). * blk_queue_enter() calls blk_queue_pm_only() and that function returns true. * blk_queue_enter() calls blk_pm_request_resume() and that function does not call pm_request_resume() because the queue runtime status is RPM_ACTIVE. * blk_pre_runtime_suspend() changes the queue status into RPM_SUSPENDING. Fix this race by changing the queue runtime status into RPM_SUSPENDING before switching q_usage_counter to atomic mode. Link: https://lore.kernel.org/r/20201209052951.16136-2-bvanassche@acm.org Fixes: 986d413b7c15 ("blk-mq: Enable support for runtime power management") Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Stanley Chu <stanley.chu@mediatek.com> Co-developed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-07Revert "block: Fix a lockdep complaint triggered by request queue flushing"Ming Lei
This reverts commit b3c6a59975415bde29cfd76ff1ab008edbf614a9. Now we can avoid nvme-loop lockdep warning of 'lockdep possible recursive locking' by nvme-loop's lock class, no need to apply dynamically allocated lock class key, so revert commit b3c6a5997541("block: Fix a lockdep complaint triggered by request queue flushing"). This way fixes horrible SCSI probe delay issue on megaraid_sas, and it is reported the whole probe may take more than half an hour. Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: Qian Cai <cai@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: John Garry <john.garry@huawei.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-mq: add new API of blk_mq_hctx_set_fq_lock_classMing Lei
flush_end_io() may be called recursively from some driver, such as nvme-loop, so lockdep may complain 'possible recursive locking'. Commit b3c6a5997541("block: Fix a lockdep complaint triggered by request queue flushing") tried to address this issue by assigning dynamically allocated per-flush-queue lock class. This solution adds synchronize_rcu() for each hctx's release handler, and causes horrible SCSI MQ probe delay(more than half an hour on megaraid sas). Add new API of blk_mq_hctx_set_fq_lock_class() for these drivers, so we just need to use driver specific lock class for avoiding the lockdep warning of 'possible recursive locking'. Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: Qian Cai <cai@redhat.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: John Garry <john.garry@huawei.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07block: disable iopoll for split bioJeffle Xu
iopoll is initially for small size, latency sensitive IO. It doesn't work well for big IO, especially when it needs to be split to multiple bios. In this case, the returned cookie of __submit_bio_noacct_mq() is indeed the cookie of the last split bio. The completion of *this* last split bio done by iopoll doesn't mean the whole original bio has completed. Callers of iopoll still need to wait for completion of other split bios. Besides bio splitting may cause more trouble for iopoll which isn't supposed to be used in case of big IO. iopoll for split bio may cause potential race if CPU migration happens during bio submission. Since the returned cookie is that of the last split bio, polling on the corresponding hardware queue doesn't help complete other split bios, if these split bios are enqueued into different hardware queues. Since interrupts are disabled for polling queues, the completion of these other split bios depends on timeout mechanism, thus causing a potential hang. iopoll for split bio may also cause hang for sync polling. Currently both the blkdev and iomap-based fs (ext4/xfs, etc) support sync polling in direct IO routine. These routines will submit bio without REQ_NOWAIT flag set, and then start sync polling in current process context. The process may hang in blk_mq_get_tag() if the submitted bio has to be split into multiple bios and can rapidly exhaust the queue depth. The process are waiting for the completion of the previously allocated requests, which should be reaped by the following polling, and thus causing a deadlock. To avoid these subtle trouble described above, just disable iopoll for split bio and return BLK_QC_T_NONE in this case. The side effect is that non-HIPRI IO also returns BLK_QC_T_NONE now. It should be acceptable since the returned cookie is never used for non-HIPRI IO. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07block: Align max_hw_sectors to logical blocksizeDamien Le Moal
Block device drivers do not have to call blk_queue_max_hw_sectors() to set a limit on request size if the default limit BLK_SAFE_MAX_SECTORS is acceptable. However, this limit (255 sectors) may not be aligned to the device logical block size which cannot be used as is for a request maximum size. This is the case for the null_blk device driver. Modify blk_queue_max_hw_sectors() to make sure that the request size limits specified by the max_hw_sectors and max_sectors queue limits are always aligned to the device logical block size. Additionally, to avoid introducing a dependence on the execution order of this function with blk_queue_logical_block_size(), also modify blk_queue_logical_block_size() to perform the same alignment when the logical block size is set after max_hw_sectors. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07block: Improve blk_revalidate_disk_zones() checksDamien Le Moal
Improves the checks on the zones of a zoned block device done in blk_revalidate_disk_zones() by making sure that the device report_zones method did report at least one zone and that the zones reported exactly cover the entire disk capacity, that is, that there are no missing zones at the end of the disk sector range. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-mq: skip hybrid polling if iopoll doesn't spinPavel Begunkov
If blk_poll() is not going to spin (i.e. @spin=false), it also must not sleep in hybrid polling, otherwise it might be pretty suprising for users trying to do a quick check and expecting no-wait behaviour. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-iocost: Factor out the base vrate change into a separate functionBaolin Wang
Factor out the base vrate change code into a separate function to fimplify the ioc_timer_fn(). No functional change. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-iocost: Factor out the active iocgs' state check into a separate functionBaolin Wang
Factor out the iocgs' state check into a separate function to simplify the ioc_timer_fn(). No functional change. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-iocost: Move the usage ratio calculation to the correct placeBaolin Wang
We only use the hweight based usage ratio to calculate the new hweight_inuse of the iocg to decide if this iocg can donate some surplus vtime. Thus move the usage ratio calculation to the correct place to avoid unnecessary calculation for some vtime shortage iocgs. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-iocost: Remove unnecessary advance declarationBaolin Wang
Remove unnecessary advance declaration of struct ioc_gq. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07blk-iocost: Fix some typos in commentsBaolin Wang
Fix some typos in comments. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-05Merge tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Single fix for an issue with chunk_sectors and stacked devices" * tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block: block: use gcd() to fix chunk_sectors limit stacking
2020-12-04Merge tag 'for-5.10/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM's bio splitting changes that were made during v5.9. This restores splitting in terms of varied per-target ti->max_io_len rather than use block core's single stacked 'chunk_sectors' limit. - Like DM crypt, update DM integrity to not use crypto drivers that have CRYPTO_ALG_ALLOCATES_MEMORY set. - Fix DM writecache target's argument parsing and status display. - Remove needless BUG() from dm writecache's persistent_memory_claim() - Remove old gcc workaround in DM cache target's block_div() for ARM link errors now that gcc >= 4.9 is required. - Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range. - Remove old, and now frowned upon, BUG_ON(in_interrupt()) in dm_table_event(). - Remove invalid sparse annotations from dm_prepare_ioctl() and dm_unprepare_ioctl(). * tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: remove invalid sparse __acquires and __releases annotations dm: fix double RCU unlock in dm_dax_zero_page_range() error path dm: fix IO splitting dm writecache: remove BUG() and fail gracefully instead dm table: Remove BUG_ON(in_interrupt()) dm: fix bug with RCU locking in dm_blk_report_zones Revert "dm cache: fix arm link errors with inline" dm writecache: fix the maximum number of arguments dm writecache: advance the number of arguments when reporting max_age dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
2020-12-04dm: fix IO splittingMike Snitzer
Commit 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting") caused a couple regressions: 1) Using lcm_not_zero() when stacking chunk_sectors was a bug because chunk_sectors must reflect the most limited of all devices in the IO stack. 2) DM targets that set max_io_len but that do _not_ provide an .iterate_devices method no longer had there IO split properly. And commit 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()") also caused a regression where DM no longer supported varied (per target) IO splitting. The implication being the potential for severely reduced performance for IO stacks that use a DM target like dm-cache to hide performance limitations of a slower device (e.g. one that requires 4K IO splitting). Coming full circle: Fix all these issues by discontinuing stacking chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(), add optional chunk_sectors override argument to blk_max_size_offset() and update DM's max_io_len() to pass ti->max_io_len to its blk_max_size_offset() call. Passing in an optional chunk_sectors override to blk_max_size_offset() allows for code reuse of block's centralized calculation for max IO size based on provided offset and split boundary. Fixes: 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting") Fixes: 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()") Cc: stable@vger.kernel.org Reported-by: John Dorminy <jdorminy@redhat.com> Reported-by: Bruce Johnston <bjohnsto@redhat.com> Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: John Dorminy <jdorminy@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2020-12-04block: remove the request_queue to argument request based tracepointsChristoph Hellwig
The request_queue can trivially be derived from the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04block: remove the request_queue argument to the block_bio_remap tracepointChristoph Hellwig
The request_queue can trivially be derived from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04block: remove the request_queue argument to the block_split tracepointChristoph Hellwig
The request_queue can trivially be derived from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04block: simplify and extend the block_bio_merge tracepoint classChristoph Hellwig
The block_bio_merge tracepoint class can be reused for most bio-based tracepoints. For that it just needs to lose the superfluous q and rq parameters. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02blk-throttle: don't check whether or not lower limit is valid if ↵Yu Kuai
CONFIG_BLK_DEV_THROTTLING_LOW is off blk_throtl_update_limit_valid() will search for descendants to see if 'LIMIT_LOW' of bps/iops and READ/WRITE is nonzero. However, they're always zero if CONFIG_BLK_DEV_THROTTLING_LOW is not set, furthermore, a lot of time will be wasted to iterate descendants. Thus do nothing in blk_throtl_update_limit_valid() in such situation. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: fix inflight statistics of part0Jeffle Xu
The inflight of partition 0 doesn't include inflight IOs to all sub-partitions, since currently mq calculates inflight of specific partition by simply camparing the value of the partition pointer. Thus the following case is possible: $ cat /sys/block/vda/inflight        0        0 $ cat /sys/block/vda/vda1/inflight        0      128 While single queue device (on a previous version, e.g. v3.10) has no this issue: $cat /sys/block/sda/sda3/inflight 0 33 $cat /sys/block/sda/inflight 0 33 Partition 0 should be specially handled since it represents the whole disk. This issue is introduced since commit bf0ddaba65dd ("blk-mq: fix sysfs inflight counter"). Besides, this patch can also fix the inflight statistics of part 0 in /proc/diskstats. Before this patch, the inflight statistics of part 0 doesn't include that of sub partitions. (I have marked the 'inflight' field with asterisk.) $cat /proc/diskstats 259 0 nvme0n1 45974469 0 367814768 6445794 1 0 1 0 *0* 111062 6445794 0 0 0 0 0 0 259 2 nvme0n1p1 45974058 0 367797952 6445727 0 0 0 0 *33* 111001 6445727 0 0 0 0 0 0 This is introduced since commit f299b7c7a9de ("blk-mq: provide internal in-flight variant"). Fixes: bf0ddaba65dd ("blk-mq: fix sysfs inflight counter") Fixes: f299b7c7a9de ("blk-mq: provide internal in-flight variant") Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [axboe: adapt for 5.11 partition change] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02bio: optimise bvec iterationPavel Begunkov
__bio_for_each_bvec(), __bio_for_each_segment() and bio_copy_data_iter() fall under conditions of bvec_iter_advance_single(), which is a faster and slimmer version of bvec_iter_advance(). Add bio_advance_iter_single() and convert them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: stop using bdget_disk for partition 0Christoph Hellwig
We can just dereference the point in struct gendisk instead. Also remove the now unused export. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: merge struct block_device and struct hd_structChristoph Hellwig
Instead of having two structures that represent each block device with different life time rules, merge them into a single one. This also greatly simplifies the reference counting rules, as we can use the inode reference count as the main reference count for the new struct block_device, with the device model reference front ending it for device model interaction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: switch disk_part_iter_* to use a struct block_deviceChristoph Hellwig
Switch the partition iter infrastructure to iterate over block_device references instead of hd_struct ones mostly used to get at the block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: pass a block_device to invalidate_partitionChristoph Hellwig
Pass the block_device actually needed instead of looking it up using bdget_disk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: pass a block_device to blk_alloc_devtChristoph Hellwig
Pass the block_device actually needed instead of the hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove the partno field from struct hd_structChristoph Hellwig
Just use the bd_partno field in struct block_device everywhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: switch partition lookup to use struct block_deviceChristoph Hellwig
Use struct block_device to lookup partitions on a disk. This removes all usage of struct hd_struct from the I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: allocate struct hd_struct as part of struct bdev_inodeChristoph Hellwig
Allocate hd_struct together with struct block_device to pre-load the lifetime rule changes in preparation of merging the two structures. Note that part0 was previously embedded into struct gendisk, but is a separate allocation now, and already points to the block_device instead of the hd_struct. The lifetime of struct gendisk is still controlled by the struct device embedded in the part0 hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move the policy field to struct block_deviceChristoph Hellwig
Move the policy field to struct block_device and rename it to the more descriptive bd_read_only. Also turn the field into a bool as it is used as such. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move make_it_fail to struct block_deviceChristoph Hellwig
Move the make_it_fail flag to struct block_device an turn it into a bool in preparation of killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move holder_dir to struct block_deviceChristoph Hellwig
Move the holder_dir field to struct block_device in preparation for kill struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move the partition_meta_info to struct block_deviceChristoph Hellwig
Move the partition_meta_info to struct block_device in preparation for killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>