aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-10-21KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATAMasahiro Kozuka
Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the PSP encrypts the data with the guest's key when writing to guest memory. If the target memory was not previously encrypted, the cache may contain dirty, unecrypted data that will persist on non-coherent systems. Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Masahiro Kozuka <masa.koz@kozuka.jp> [sean: converted bug report to changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210914210951.2994260-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-21KVM: MMU: Reset mmu->pkru_mask to avoid stale dataChenyi Qiang
When updating mmu->pkru_mask, the value can only be added but it isn't reset in advance. This will make mmu->pkru_mask keep the stale data. Fix this issue. Fixes: 2d344105f57c ("KVM, pkeys: introduce pkru_mask to cache conditions") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20211021071022.1140-1-chenyi.qiang@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-21KVM: nVMX: promptly process interrupts delivered while in guest modePaolo Bonzini
Since commit c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") there is no longer the certainty that check_nested_events() tries to inject an external interrupt vmexit to L1 on every call to vcpu_enter_guest. Therefore, even in that case we need to set KVM_REQ_EVENT. This ensures that inject_pending_event() is called, and from there kvm_check_nested_events(). Fixes: c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-21KVM: x86: check for interrupts before deciding whether to exit the fast pathPaolo Bonzini
The kvm_x86_sync_pir_to_irr callback can sometimes set KVM_REQ_EVENT. If that happens exactly at the time that an exit is handled as EXIT_FASTPATH_REENTER_GUEST, vcpu_enter_guest will go incorrectly through the loop that calls kvm_x86_run, instead of processing the request promptly. Fixes: 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18KVM: SEV-ES: reduce ghcb_sa_len to 32 bitsPaolo Bonzini
The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT), so there is no need for it to be a u64. This fixes a build error on 32-bit systems: i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io: sev.c:(.text+0x110f): undefined reference to `__udivdi3' Cc: stable@vger.kernel.org Fixes: 019057bd73d1 ("KVM: SEV-ES: fix length of string I/O") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18KVM: VMX: Remove redundant handling of bus lock vmexitHao Xiang
Hardware may or may not set exit_reason.bus_lock_detected on BUS_LOCK VM-Exits. Dealing with KVM_RUN_X86_BUS_LOCK in handle_bus_lock_vmexit could be redundant when exit_reason.basic is EXIT_REASON_BUS_LOCK. We can remove redundant handling of bus lock vmexit. Unconditionally Set exit_reason.bus_lock_detected in handle_bus_lock_vmexit(), and deal with KVM_RUN_X86_BUS_LOCK only in vmx_handle_exit(). Signed-off-by: Hao Xiang <hao.xiang@linux.alibaba.com> Message-Id: <1634299161-30101-1-git-send-email-hao.xiang@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unloadSean Christopherson
WARN if the static keys used to track if any vCPU has disabled its APIC are left elevated at module exit. Unlike the underflow case, nothing in the static key infrastructure will complain if a key is left elevated, and because an elevated key only affects performance, nothing in KVM will fail if either key is improperly incremented. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211013003554.47705-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU ↵Sean Christopherson
RESET" Revert a change to open code bits of kvm_lapic_set_base() when emulating APIC RESET to fix an apic_hw_disabled underflow bug due to arch.apic_base and apic_hw_disabled being unsyncrhonized when the APIC is created. If kvm_arch_vcpu_create() fails after creating the APIC, kvm_free_lapic() will see the initialized-to-zero vcpu->arch.apic_base and decrement apic_hw_disabled without KVM ever having incremented apic_hw_disabled. Using kvm_lapic_set_base() in kvm_lapic_reset() is also desirable for a potential future where KVM supports RESET outside of vCPU creation, in which case all the side effects of kvm_lapic_set_base() are needed, e.g. to handle the transition from x2APIC => xAPIC. Alternatively, KVM could temporarily increment apic_hw_disabled (and call kvm_lapic_set_base() at RESET), but that's a waste of cycles and would impact the performance of other vCPUs and VMs. The other subtle side effect is that updating the xAPIC ID needs to be done at RESET regardless of whether the APIC was previously enabled, i.e. kvm_lapic_reset() needs an explicit call to kvm_apic_set_xapic_id() regardless of whether or not kvm_lapic_set_base() also performs the update. That makes stuffing the enable bit at vCPU creation slightly more palatable, as doing so affects only the apic_hw_disabled key. Opportunistically tweak the comment to explicitly call out the connection between vcpu->arch.apic_base and apic_hw_disabled, and add a comment to call out the need to always do kvm_apic_set_xapic_id() at RESET. Underflow scenario: kvm_vm_ioctl() { kvm_vm_ioctl_create_vcpu() { kvm_arch_vcpu_create() { if (something_went_wrong) goto fail_free_lapic; /* vcpu->arch.apic_base is initialized when something_went_wrong is false. */ kvm_vcpu_reset() { kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) { vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE; } } return 0; fail_free_lapic: kvm_free_lapic() { /* vcpu->arch.apic_base is not yet initialized when something_went_wrong is true. */ if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE)) static_branch_slow_dec_deferred(&apic_hw_disabled); // <= underflow bug. } return r; } } } This (mostly) reverts commit 421221234ada41b4a9f0beeb08e30b07388bd4bd. Fixes: 421221234ada ("KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET") Reported-by: syzbot+9fc046ab2b0cf295a063@syzkaller.appspotmail.com Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211013003554.47705-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18KVM: SEV-ES: Set guest_state_protected after VMSA updatePeter Gonda
The refactoring in commit bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") left behind the assignment to svm->vcpu.arch.guest_state_protected; add it back. Signed-off-by: Peter Gonda <pgonda@google.com> [Delta between v2 and v3 of Peter's patch, which had already been committed; the commit message is my own. - Paolo] Fixes: bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-18KVM: X86: fix lazy allocation of rmapsPaolo Bonzini
If allocation of rmaps fails, but some of the pointers have already been written, those pointers can be cleaned up when the memslot is freed, or even reused later for another attempt at allocating the rmaps. Therefore there is no need to WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be skipped lest KVM will overwrite the previous pointer and will indeed leak memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-15Merge tag 'kvmarm-fixes-5.15-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.15, take #2 - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED
2021-10-15KVM: SEV-ES: fix length of string I/OPaolo Bonzini
The size of the data in the scratch buffer is not divided by the size of each port I/O operation, so vcpu->arch.pio.count ends up being larger than it should be by a factor of size. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-05KVM: arm64: Release mmap_lock when using VM_SHARED with MTEQuentin Perret
VM_SHARED mappings are currently forbidden in a memslot with MTE to prevent two VMs racing to sanitise the same page. However, this check is performed while holding current->mm's mmap_lock, but fails to release it. Fix this by releasing the lock when needed. Fixes: ea7fc1bb1cd1 ("KVM: arm64: Introduce MTE VM feature") Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211005122031.809857-1-qperret@google.com
2021-10-05KVM: arm64: Report corrupted refcount at EL2Quentin Perret
Some of the refcount manipulation helpers used at EL2 are instrumented to catch a corrupted state, but not all of them are treated equally. Let's make things more consistent by instrumenting hyp_page_ref_dec_and_test() as well. Acked-by: Will Deacon <will@kernel.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211005090155.734578-6-qperret@google.com
2021-10-05KVM: arm64: Fix host stage-2 PGD refcountQuentin Perret
The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). Fixes: 1025c8c0c6ac ("KVM: arm64: Wrap the host with a stage 2") Acked-by: Will Deacon <will@kernel.org> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211005090155.734578-5-qperret@google.com
2021-10-04Merge tag 'kvm-s390-master-5.15-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: allow to compile without warning with W=1
2021-09-30KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checksSean Christopherson
Check whether a CPUID entry's index is significant before checking for a matching index to hack-a-fix an undefined behavior bug due to consuming uninitialized data. RESET/INIT emulation uses kvm_cpuid() to retrieve CPUID.0x1, which does _not_ have a significant index, and fails to initialize the dummy variable that doubles as EBX/ECX/EDX output _and_ ECX, a.k.a. index, input. Practically speaking, it's _extremely_ unlikely any compiler will yield code that causes problems, as the compiler would need to inline the kvm_cpuid() call to detect the uninitialized data, and intentionally hose the kernel, e.g. insert ud2, instead of simply ignoring the result of the index comparison. Although the sketchy "dummy" pattern was introduced in SVM by commit 66f7b72e1171 ("KVM: x86: Make register state after reset conform to specification"), it wasn't actually broken until commit 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the order of operations such that "index" was checked before the significant flag. Avoid consuming uninitialized data by reverting to checking the flag before the index purely so that the fix can be easily backported; the offending RESET/INIT code has been refactored, moved, and consolidated from vendor code to common x86 since the bug was introduced. A future patch will directly address the bad RESET/INIT behavior. The undefined behavior was detected by syzbot + KernelMemorySanitizer. BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68 BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline] kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline] kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534 vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788 kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020 Local variable ----dummy@kvm_vcpu_reset created at: kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com Reported-by: Alexander Potapenko <glider@google.com> Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping") Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20210929222426.1855730-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30x86/kvmclock: Move this_cpu_pvti into kvmclock.hZelin Deng
There're other modules might use hv_clock_per_cpu variable like ptp_kvm, so move it into kvmclock.h and export the symbol to make it visiable to other modules. Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com> Cc: <stable@vger.kernel.org> Message-Id: <1632892429-101194-2-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-28KVM: s390: Function documentation fixesJanosch Frank
The latest compile changes pointed us to a few instances where we use the kernel documentation style but don't explain all variables or don't adhere to it 100%. It's easy to fix so let's do that. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-09-27KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issueZhenzhong Duan
When updating the host's mask for its MSR_IA32_TSX_CTRL user return entry, clear the mask in the found uret MSR instead of vmx->guest_uret_msrs[i]. Modifying guest_uret_msrs directly is completely broken as 'i' does not point at the MSR_IA32_TSX_CTRL entry. In fact, it's guaranteed to be an out-of-bounds accesses as is always set to kvm_nr_uret_msrs in a prior loop. By sheer dumb luck, the fallout is limited to "only" failing to preserve the host's TSX_CTRL_CPUID_CLEAR. The out-of-bounds access is benign as it's guaranteed to clear a bit in a guest MSR value, which are always zero at vCPU creation on both x86-64 and i386. Cc: stable@vger.kernel.org Fixes: 8ea8b8d6f869 ("KVM: VMX: Use common x86's uret MSR list as the one true list") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210926015545.281083-1-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-24Merge tag 'kvmarm-fixes-5.15-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 5.15, take #1 - Add missing FORCE target when building the EL2 object - Fix a PMU probe regression on some platforms
2021-09-23KVM: X86: Synchronize the shadow pagetable before link itLai Jiangshan
If gpte is changed from non-present to present, the guest doesn't need to flush tlb per SDM. So the host must synchronze sp before link it. Otherwise the guest might use a wrong mapping. For example: the guest first changes a level-1 pagetable, and then links its parent to a new place where the original gpte is non-present. Finally the guest can access the remapped area without flushing the tlb. The guest's behavior should be allowed per SDM, but the host kvm mmu makes it wrong. Fixes: 4731d4c7a077 ("KVM: MMU: out of sync shadow core") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210918005636.3675-3-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23KVM: X86: Fix missed remote tlb flush in rmap_write_protect()Lai Jiangshan
When kvm->tlbs_dirty > 0, some rmaps might have been deleted without flushing tlb remotely after kvm_sync_page(). If @gfn was writable before and it's rmaps was deleted in kvm_sync_page(), and if the tlb entry is still in a remote running VCPU, the @gfn is not safely protected. To fix the problem, kvm_sync_page() does the remote flush when needed to avoid the problem. Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210918005636.3675-2-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23KVM: x86: nSVM: don't copy virt_ext from vmcb12Maxim Levitsky
These field correspond to features that we don't expose yet to L2 While currently there are no CVE worthy features in this field, if AMD adds more features to this field, that could allow guest escapes similar to CVE-2021-3653 and CVE-2021-3656. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23KVM: x86: nSVM: test eax for 4K alignment for GP errata workaroundMaxim Levitsky
GP SVM errata workaround made the #GP handler always emulate the SVM instructions. However these instructions #GP in case the operand is not 4K aligned, but the workaround code didn't check this and we ended up emulating these instructions anyway. This is only an emulation accuracy check bug as there is no harm for KVM to read/write unaligned vmcb images. Fixes: 82a11e9c6fa2 ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23KVM: x86: nSVM: restore int_vector in svm_clear_vintrMaxim Levitsky
In svm_clear_vintr we try to restore the virtual interrupt injection that might be pending, but we fail to restore the interrupt vector. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]Fares Mehanna
Intel PMU MSRs is in msrs_to_save_all[], so add AMD PMU MSRs to have a consistent behavior between Intel and AMD when using KVM_GET_MSRS, KVM_SET_MSRS or KVM_GET_MSR_INDEX_LIST. We have to add legacy and new MSRs to handle guests running without X86_FEATURE_PERFCTR_CORE. Signed-off-by: Fares Mehanna <faresx@amazon.de> Message-Id: <20210915133951.22389-1-faresx@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: nVMX: re-evaluate emulation_required on nested VM exitMaxim Levitsky
If L1 had invalid state on VM entry (can happen on SMM transactions when we enter from real mode, straight to nested guest), then after we load 'host' state from VMCS12, the state has to become valid again, but since we load the segment registers with __vmx_set_segment we weren't always updating emulation_required. Update emulation_required explicitly at end of load_vmcs12_host_state. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if ↵Maxim Levitsky
!from_vmentry It is possible that when non root mode is entered via special entry (!from_vmentry), that is from SMM or from loading the nested state, the L2 state could be invalid in regard to non unrestricted guest mode, but later it can become valid. (for example when RSM emulation restores segment registers from SMRAM) Thus delay the check to VM entry, where we will check this and fail. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-7-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest stateMaxim Levitsky
Since no actual VM entry happened, the VM exit information is stale. To avoid this, synthesize an invalid VM guest state VM exit. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-6-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smmMaxim Levitsky
Use return statements instead of nested if, and fix error path to free all the maps that were allocated. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM modeMaxim Levitsky
Currently the KVM_REQ_GET_NESTED_STATE_PAGES on SVM only reloads PDPTRs, and MSR bitmap, with former not really needed for SMM as SMM exit code reloads them again from SMRAM'S CR3, and later happens to work since MSR bitmap isn't modified while in SMM. Still it is better to be consistient with VMX. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: reset pdptrs_from_userspace when exiting smmMaxim Levitsky
When exiting SMM, pdpts are loaded again from the guest memory. This fixes a theoretical bug, when exit from SMM triggers entry to the nested guest which re-uses some of the migration code which uses this flag as a workaround for a legacy userspace. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on ↵Maxim Levitsky
SMM exit Otherwise guest entry code might see incorrect L1 state (e.g paging state). Fixes: 37be407b2ce8 ("KVM: nSVM: Fix L1 state corruption upon return from SMM") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: nVMX: Filter out all unsupported controls when eVMCS was activatedVitaly Kuznetsov
Windows Server 2022 with Hyper-V role enabled failed to boot on KVM when enlightened VMCS is advertised. Debugging revealed there are two exposed secondary controls it is not happy with: SECONDARY_EXEC_ENABLE_VMFUNC and SECONDARY_EXEC_SHADOW_VMCS. These controls are known to be unsupported, as there are no corresponding fields in eVMCSv1 (see the comment above EVMCS1_UNSUPPORTED_2NDEXEC definition). Previously, commit 31de3d2500e4 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()") introduced the required filtering mechanism for VMX MSRs but for some reason put only known to be problematic (and not full EVMCS1_UNSUPPORTED_* lists) controls there. Note, Windows Server 2022 seems to have gained some sanity check for VMX MSRs: it doesn't even try to launch a guest when there's something it doesn't like, nested_evmcs_check_controls() mechanism can't catch the problem. Let's be bold this time and instead of playing whack-a-mole just filter out all unsupported controls from VMX MSRs. Fixes: 31de3d2500e4 ("x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210907163530.110066-1-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect()Vitaly Kuznetsov
KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs). Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Fixes: 9a2ae9f6b6bb ("KVM: x86: Zero the IOAPIC scan request dest vCPUs bitmap") Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210827092516.1027264-7-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: SEV: Allow some commands for mirror VMPeter Gonda
A mirrored SEV-ES VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to setup its vCPUs and have them measured, and their VMSAs encrypted. Without this change, it is impossible to have mirror VMs as part of SEV-ES VMs. Also allow the guest status check and debugging commands since they do not change any guest state. Signed-off-by: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Nathan Tempelman <natet@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Steve Rutherford <srutherford@google.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21) Message-Id: <20210921150345.2221634-3-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: SEV: Update svm_vm_copy_asid_from for SEV-ESPeter Gonda
For mirroring SEV-ES the mirror VM will need more then just the ASID. The FD and the handle are required to all the mirror to call psp commands. The mirror VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to setup its vCPUs' VMSAs for SEV-ES. Signed-off-by: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Nathan Tempelman <natet@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Steve Rutherford <srutherford@google.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21) Message-Id: <20210921150345.2221634-2-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: nVMX: Fix nested bus lock VM exitChenyi Qiang
Nested bus lock VM exits are not supported yet. If L2 triggers bus lock VM exit, it will be directed to L1 VMM, which would cause unexpected behavior. Therefore, handle L2's bus lock VM exits in L0 directly. Fixes: fe6b6bc802b4 ("KVM: VMX: Enable bus lock VM exit") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20210914095041.29764-1-chenyi.qiang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: Identify vCPU0 by its vcpu_idx instead of its vCPUs array entrySean Christopherson
Use vcpu_idx to identify vCPU0 when updating HyperV's TSC page, which is shared by all vCPUs and "owned" by vCPU0 (because vCPU0 is the only vCPU that's guaranteed to exist). Using kvm_get_vcpu() to find vCPU works, but it's a rather odd and suboptimal method to check the index of a given vCPU. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210910183220.2397812-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: Query vcpu->vcpu_idx directly and drop its accessorSean Christopherson
Read vcpu->vcpu_idx directly instead of bouncing through the one-line wrapper, kvm_vcpu_get_idx(), and drop the wrapper. The wrapper is a remnant of the original implementation and serves no purpose; remove it before it gains more users. Back when kvm_vcpu_get_idx() was added by commit 497d72d80a78 ("KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus"), the implementation was more than just a simple wrapper as vcpu->vcpu_idx did not exist and retrieving the index meant walking over the vCPU array to find the given vCPU. When vcpu_idx was introduced by commit 8750e72a79dd ("KVM: remember position in kvm->vcpus array"), the helper was left behind, likely to avoid extra thrash (but even then there were only two users, the original arm usage having been removed at some point in the past). No functional change intended. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210910183220.2397812-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22kvm: fix wrong exception emulation in check_rdtscHou Wenlong
According to Intel's SDM Vol2 and AMD's APM Vol3, when CR4.TSD is set, use rdtsc/rdtscp instruction above privilege level 0 should trigger a #GP. Fixes: d7eb82030699e ("KVM: SVM: Add intercept checks for remaining group7 instructions") Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com> Message-Id: <1297c0dd3f1bb47a6d089f850b629c7aa0247040.1629257115.git.houwenlong93@linux.alibaba.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: SEV: Pin guest memory for write for RECEIVE_UPDATE_DATASean Christopherson
Require the target guest page to be writable when pinning memory for RECEIVE_UPDATE_DATA. Per the SEV API, the PSP writes to guest memory: The result is then encrypted with GCTX.VEK and written to the memory pointed to by GUEST_PADDR field. Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210914210951.2994260-2-seanjc@google.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Peter Gonda <pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: SVM: fix missing sev_decommission in sev_receive_startMingwei Zhang
DECOMMISSION the current SEV context if binding an ASID fails after RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest context and thus needs to be paired with DECOMMISSION: The RECEIVE_START command is the only command other than the LAUNCH_START command that generates a new guest context and guest handle. The missing DECOMMISSION can result in subsequent SEV launch failures, as the firmware leaks memory and might not able to allocate more SEV guest contexts in the future. Note, LAUNCH_START suffered the same bug, but was previously fixed by commit 934002cd660b ("KVM: SVM: Call SEV Guest Decommission if ASID binding fails"). Cc: Alper Gun <alpergun@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: David Rienjes <rientjes@google.com> Cc: Marc Orr <marcorr@google.com> Cc: John Allen <john.allen@amd.com> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vipin Sharma <vipinsh@google.com> Cc: stable@vger.kernel.org Reviewed-by: Marc Orr <marcorr@google.com> Acked-by: Brijesh Singh <brijesh.singh@amd.com> Fixes: af43cbbf954b ("KVM: SVM: Add support for KVM_SEV_RECEIVE_START command") Signed-off-by: Mingwei Zhang <mizhang@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210912181815.3899316-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: SEV: Acquire vcpu mutex when updating VMSAPeter Gonda
The update-VMSA ioctl touches data stored in struct kvm_vcpu, and therefore should not be performed concurrently with any VCPU ioctl that might cause KVM or the processor to use the same data. Adds vcpu mutex guard to the VMSA updating code. Refactors out __sev_launch_update_vmsa() function to deal with per vCPU parts of sev_launch_update_vmsa(). Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest") Signed-off-by: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Message-Id: <20210915171755.3773766-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: nVMX: fix comments of handle_vmon()Yu Zhang
"VMXON pointer" is saved in vmx->nested.vmxon_ptr since commit 3573e22cfeca ("KVM: nVMX: additional checks on vmxon region"). Also, handle_vmptrld() & handle_vmclear() now have logic to check the VMCS pointer against the VMXON pointer. So just remove the obsolete comments of handle_vmon(). Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Message-Id: <20210908171731.18885-1-yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: Handle SRCU initialization failure during page track initHaimin Zhang
Check the return of init_srcu_struct(), which can fail due to OOM, when initializing the page track mechanism. Lack of checking leads to a NULL pointer deref found by a modified syzkaller. Reported-by: TCS Robot <tcs_robot@tencent.com> Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Message-Id: <1630636626-12262-1-git-send-email-tcs_kernel@tencent.com> [Move the call towards the beginning of kvm_arch_init_vm. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: VMX: Remove defunct "nr_active_uret_msrs" fieldSean Christopherson
Remove vcpu_vmx.nr_active_uret_msrs and its associated comment, which are both defunct now that KVM keeps the list constant and instead explicitly tracks which entries need to be loaded into hardware. No functional change intended. Fixes: ee9d22e08d13 ("KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210908002401.1947049-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: Clear KVM's cached guest CR3 at RESET/INITSean Christopherson
Explicitly zero the guest's CR3 and mark it available+dirty at RESET/INIT. Per Intel's SDM and AMD's APM, CR3 is zeroed at both RESET and INIT. For RESET, this is a nop as vcpu is zero-allocated. For INIT, the bug has likely escaped notice because no firmware/kernel puts its page tables root at PA=0, let alone relies on INIT to get the desired CR3 for such page tables. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210921000303.400537-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: Mark all registers as avail/dirty at vCPU creationSean Christopherson
Mark all registers as available and dirty at vCPU creation, as the vCPU has obviously not been loaded into hardware, let alone been given the chance to be modified in hardware. On SVM, reading from "uninitialized" hardware is a non-issue as VMCBs are zero allocated (thus not truly uninitialized) and hardware does not allow for arbitrary field encoding schemes. On VMX, backing memory for VMCSes is also zero allocated, but true initialization of the VMCS _technically_ requires VMWRITEs, as the VMX architectural specification technically allows CPU implementations to encode fields with arbitrary schemes. E.g. a CPU could theoretically store the inverted value of every field, which would result in VMREAD to a zero-allocated field returns all ones. In practice, only the AR_BYTES fields are known to be manipulated by hardware during VMREAD/VMREAD; no known hardware or VMM (for nested VMX) does fancy encoding of cacheable field values (CR0, CR3, CR4, etc...). In other words, this is technically a bug fix, but practically speakings it's a glorified nop. Failure to mark registers as available has been a lurking bug for quite some time. The original register caching supported only GPRs (+RIP, which is kinda sorta a GPR), with the masks initialized at ->vcpu_reset(). That worked because the two cacheable registers, RIP and RSP, are generally speaking not read as side effects in other flows. Arguably, commit aff48baa34c0 ("KVM: Fetch guest cr3 from hardware on demand") was the first instance of failure to mark regs available. While _just_ marking CR3 available during vCPU creation wouldn't have fixed the VMREAD from an uninitialized VMCS bug because ept_update_paging_mode_cr0() unconditionally read vmcs.GUEST_CR3, marking CR3 _and_ intentionally not reading GUEST_CR3 when it's available would have avoided VMREAD to a technically-uninitialized VMCS. Fixes: aff48baa34c0 ("KVM: Fetch guest cr3 from hardware on demand") Fixes: 6de4f3ada40b ("KVM: Cache pdptrs") Fixes: 6de12732c42c ("KVM: VMX: Optimize vmx_get_rflags()") Fixes: 2fb92db1ec08 ("KVM: VMX: Cache vmcs segment fields") Fixes: bd31fe495d0d ("KVM: VMX: Add proper cache tracking for CR0") Fixes: f98c1e77127d ("KVM: VMX: Add proper cache tracking for CR4") Fixes: 5addc235199f ("KVM: VMX: Cache vmcs.EXIT_QUALIFICATION using arch avail_reg flags") Fixes: 8791585837f6 ("KVM: VMX: Cache vmcs.EXIT_INTR_INFO using arch avail_reg flags") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210921000303.400537-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2023-12-11 00:34:38 +0000