| Age | Commit message (Collapse) | Author |
|---|
|
It's an enum, not a #define, you can't use it in asm files.
Introduced in commit 5fa10196bdb5 ("x86: Ignore NMIs that come in during
early boot"), and sadly I didn't compile-test things like I should have
before pushing out.
My weak excuse is that the x86 tree generally doesn't introduce stupid
things like this (and the ARM pull afterwards doesn't cause me to do a
compile-test either, since I don't cross-compile).
Cc: Don Zickus <dzickus@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM fixes from Russell King:
"A number of ARM updates for -rc, covering mostly ARM specific code,
but with one change to modpost.c to allow Thumb section mismatches to
be detected.
ARM changes include reporting when an attempt is made to boot a LPAE
kernel on hardware which does not support LPAE, rather than just being
silent about it.
A number of other minor fixes are included too"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 7992/1: boot: compressed: ignore bswapsdi2.S
ARM: 7991/1: sa1100: fix compile problem on Collie
ARM: fix noMMU kallsyms symbol filtering
ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU
ARM: 7964/1: Detect section mismatches in thumb relocations
ARM: 7963/1: mm: report both sections from PMD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"A small collection of minor fixes. The FPU stuff is still pending, I
fear. I haven't heard anything from Suresh so I suspect I'm going to
have to dig into the init specifics myself and fix up the patchset"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Ignore NMIs that come in during early boot
x86, trace: Further robustify CR2 handling vs tracing
x86, trace: Fix CR2 corruption when tracing page faults
x86/efi: Quirk out SGI UV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull power fixes from Ben Herrenschmidt:
"Here are a couple of powerpc fixes for 3.14.
One is (another!) nasty TM problem, we can crash the kernel by forking
inside a transaction. The other one is a simple fix for an alignment
issue which can hurt in LE mode"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Align p_dyn, p_rela and p_st symbols
powerpc/tm: Fix crash when forking inside a transaction
|
|
Don Zickus reports:
A customer generated an external NMI using their iLO to test kdump
worked. Unfortunately, the machine hung. Disabling the nmi_watchdog
made things work.
I speculated the external NMI fired, caused the machine to panic (as
expected) and the perf NMI from the watchdog came in and was latched.
My guess was this somehow caused the hang.
----
It appears that the latched NMI stays latched until the early page
table generation on 64 bits, which causes exceptions to happen which
end in IRET, which re-enable NMI. Therefore, ignore NMIs that come in
during early execution, until we have proper exception handling.
Reported-and-tested-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1394221143-29713-1-git-send-email-dzickus@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.5+, older with some backport effort
|
|
Commit 017f161a55b4 (ARM: 7877/1: use built-in byte swap function) added
bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update
the .gitignore. Thus after a a build git status shows bswapsdi2.S as a
new file, which is a little annoying.
This patch updates arch/arm/boot/compressed/.gitignore to ignore
bswapsdi2.S, as we already do for ashldi3.S and others.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Due to a problem in the MFD Kconfig it was not possible to
compile the UCB battery driver for the Collie SA1100 system,
in turn making it impossible to compile in the battery driver.
(See patch "mfd: include all drivers in subsystem menu".)
After fixing the MFD Kconfig (separate patch) a compile error
appears in the Collie battery driver due to the <mach/collie.h>
implicitly requiring <mach/hardware.h> through <linux/gpio.h>
via <mach/gpio.h> prior to commit
40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface".
Fix this up by including the required header into
<mach/collie.h>.
Cc: stable@vger.kernel.org
Cc: Andrea Adami <andrea.adami@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's
no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This
commit makes that explicit.
Since we do this, we don't need to mess around in asm/memory.h with
ifdefs to sort this out, so let's get rid of that, and there's no point
offering the "Memory split" option for noMMU as that's meaningless
there.
Fixes: b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This fixes a subtle issue with cache flush which could potentially cause
random userspace crashes because of stale icache lines.
This error crept in when consolidating the cache flush code
Fixes: bd12976c3664 (ARC: cacheflush refactor #3: Unify the {d,i}cache)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 3.13
Cc: arc-linux-dev@synopsys.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fix from Konrad Rzeszutek Wilk:
"This has exactly one patch for Xen ARM. It sets the dependency to
compile the kernel with MMU enabled - otherwise - the guest won't work
very well"
* tag 'stable/for-linus-3.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
ARM: XEN depends on having a MMU
|
|
Pull c6x build fix from Mark Salter:
"Build fix for c6x"
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
c6x: fix build failure caused by cache.h
|
|
The 64bit relocation code places a few symbols in the text segment.
These symbols are only 4 byte aligned where they need to be 8 byte
aligned. Add an explicit alignment.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
When we fork/clone we currently don't copy any of the TM state to the new
thread. This results in a TM bad thing (program check) when the new process is
switched in as the kernel does a tmrechkpt with TEXASR FS not set. Also, since
R1 is from userspace, we trigger the bad kernel stack pointer detection. So we
end up with something like this:
Bad kernel stack pointer 0 at c0000000000404fc
cpu 0x2: Vector: 700 (Program Check) at [c00000003ffefd40]
pc: c0000000000404fc: restore_gprs+0xc0/0x148
lr: 0000000000000000
sp: 0
msr: 9000000100201030
current = 0xc000001dd1417c30
paca = 0xc00000000fe00800 softe: 0 irq_happened: 0x01
pid = 0, comm = swapper/2
WARNING: exception is not recoverable, can't continue
The below fixes this by flushing the TM state before we copy the task_struct to
the clone. To do this we go through the tmreclaim patch, which removes the
checkpointed registers from the CPU and transitions the CPU out of TM suspend
mode. Hence we need to call tmrechkpt after to restore the checkpointed state
and the TM mode for the current task.
To make this fail from userspace is simply:
tbegin
li r0, 2
sc
<boom>
Kudos to Adhemerval Zanella Neto for finding this.
Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: Adhemerval Zanella Neto <azanella@br.ibm.com>
cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Building on commit 0ac09f9f8cd1 ("x86, trace: Fix CR2 corruption when
tracing page faults") this patch addresses another few issues:
- Now that read_cr2() is lifted into trace_do_page_fault(), we should
pass the address to trace_page_fault_entries() to avoid it
re-reading a potentially changed cr2.
- Put both trace_do_page_fault() and trace_page_fault_entries() under
CONFIG_TRACING.
- Mark both fault entry functions {,trace_}do_page_fault() as notrace
to avoid getting __mcount or other function entry trace callbacks
before we've observed CR2.
- Mark __do_page_fault() as noinline to guarantee the function tracer
does get to see the fault.
Cc: <jolsa@redhat.com>
Cc: <vincent.weaver@maine.edu>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140306145300.GO9987@twins.programming.kicks-ass.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
The trace_do_page_fault function trigger tracepoint
and then handles the actual page fault.
This could lead to error if the tracepoint caused page
fault. The original cr2 value gets lost and the original
page fault handler kills current process with SIGSEGV.
This happens if you record page faults with callchain
data, the user part of it will cause tracepoint handler
to page fault:
# perf record -g -e exceptions:page_fault_user ls
Fixing this by saving the original cr2 value
and using it after tracepoint handler is done.
v2: Moving the cr2 read before exception_enter, because
it could trigger tracepoint as well.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1402211701380.6395@vincent-weaver-1.um.maine.edu
Link: http://lkml.kernel.org/r/20140228160526.GD1133@krava.brq.redhat.com
|
|
* Disable the new EFI 1:1 virtual mapping for SGI UV because using it
causes a crash during boot - Borislav Petkov
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Alex reported hitting the following BUG after the EFI 1:1 virtual
mapping work was merged,
kernel BUG at arch/x86/mm/init_64.c:351!
invalid opcode: 0000 [#1] SMP
Call Trace:
[<ffffffff818aa71d>] init_extra_mapping_uc+0x13/0x15
[<ffffffff818a5e20>] uv_system_init+0x22b/0x124b
[<ffffffff8108b886>] ? clockevents_register_device+0x138/0x13d
[<ffffffff81028dbb>] ? setup_APIC_timer+0xc5/0xc7
[<ffffffff8108b620>] ? clockevent_delta2ns+0xb/0xd
[<ffffffff818a3a92>] ? setup_boot_APIC_clock+0x4a8/0x4b7
[<ffffffff8153d955>] ? printk+0x72/0x74
[<ffffffff818a1757>] native_smp_prepare_cpus+0x389/0x3d6
[<ffffffff818957bc>] kernel_init_freeable+0xb7/0x1fb
[<ffffffff81535530>] ? rest_init+0x74/0x74
[<ffffffff81535539>] kernel_init+0x9/0xff
[<ffffffff81541dfc>] ret_from_fork+0x7c/0xb0
[<ffffffff81535530>] ? rest_init+0x74/0x74
Getting this thing to work with the new mapping scheme would need more
work, so automatically switch to the old memmap layout for SGI UV.
Acked-by: Russ Anderson <rja@sgi.com>
Cc: Alex Thorlton <athorlton@sgi.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
|
|
A patch to linux/irqflags.h uncovered a problem with c6x asm/cache.h
which causes a build failure:
/arch/c6x/include/asm/cache.h:63:20: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘c6x_cache_init’
extern void __init c6x_cache_init(void);
The asm/cache.h was relying on linux/irqflags.h to pull in linux/init.h
but the recent patch changed that. The c6x header should have included
linux/init.h all along.
Signed-off-by: Mark Salter <msalter@redhat.com>
|
|
Merge misc fixes from Andrew Morton.
* emailed patches from Andrew Morton akpm@linux-foundation.org>:
mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness
mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
MAINTAINERS: add and correct types of some "T:" entries
MAINTAINERS: use tab for separator
rapidio/tsi721: fix tasklet termination in dma channel release
hfsplus: fix remount issue
zram: avoid null access when fail to alloc meta
sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
ocfs2: fix quota file corruption
drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX
kallsyms: fix absolute addresses for kASLR
scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression
mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
memcg: reparent charges of children before processing parent
memcg: fix endless loop in __mem_cgroup_iter_next()
lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
dma debug: account for cachelines and read-only mappings in overlap tracking
mm: close PageTail race
MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
|
|
Commit bcf24e1daa94 ("mmc: omap_hsmmc: use the generic config for
omap2plus devices"), enabled the build for other platforms for compile
testing.
sh-allmodconfig now fails with:
include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant
make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1
This happens because SuperH #defines "CCR", which is one of the enum
values in include/linux/omap-dma.h. There's a similar issue with "CCR2"
on sh2a.
As "CCR" and "CCR2" are too generic names for global #defines, prefix
them with "SH_" to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.linaro.org/people/mike.turquette/linux
Pull clk framework fixes from Mike Turquette:
"Clock framework and driver fixes, all of which fix user-visible
regressions.
There is a single framework fix that prevents dereferencing a NULL
pointer when calling clk_get. The range of fixes for clock driver
regressions spans memory leak fixes, touching the wrong registers that
cause things to explode, misconfigured clock rates that result in
non-responsive devices and even some boot failures. The most benign
fix is DT binding doc typo. It is a stable ABI exposed from the
kernel that was introduced in -rc1, so best to fix it now"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
clk:at91: Fix memory leak in of_at91_clk_master_setup()
clk: nomadik: fix multiplatform problem
clk: Correct handling of NULL clk in __clk_{get, put}
clk: shmobile: Fix typo in MSTP clock DT bindings
clk: shmobile: rcar-gen2: Fix qspi divisor
clk: shmobile: rcar-gen2: Fix clock parent for all non-PLL clocks
clk: tegra124: remove gr2d and gr3d clocks
clk: tegra: Fix vic03 mux index
clk: shmobile: rcar-gen2: Fix qspi divisor
clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks
clk: tegra: use max divider if divider overflows
clk: tegra: cclk_lp has a pllx/2 divider
clk: tegra: fix sdmmc clks on Tegra1x4
clk: tegra: fix host1x clock on Tegra124
clk: tegra: PLLD2 fixes for hdmi
clk: tegra: Fix PLLD mnp table
clk: tegra: Fix PLLP rate table
clk: tegra: Correct clock number for UARTE
clk: tegra: Add missing Tegra20 fuse clks
ARM: keystone: dts: fix clkvcp3 control register address
...
|
|
arch/arm/xen/enlighten.c (and maybe others) use MMU-specific functions
like pte_mkspecial which are only available on MMU builds. So let XEN
depend on MMU.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes, most of them on the tooling side"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix strict alias issue for find_first_bit
perf tools: fix BFD detection on opensuse
perf: Fix hotplug splat
perf/x86: Fix event scheduling
perf symbols: Destroy unused symsrcs
perf annotate: Check availability of annotate when processing samples
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"The VMCOREINFO patch I'll pushing for this release to avoid having a
release with kASLR and but without that information.
I was hoping to include the FPU patches from Suresh, but ran into a
problem (see other thread); will try to make them happen next week"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: add missed "static" declarations
x86, kaslr: export offset in VMCOREINFO ELF notes
|
|
Pull KVM fixes from Paolo Bonzini:
"Three x86 fixes and one for ARM/ARM64.
In particular, nested virtualization on Intel is broken in 3.13 and
fixed by this pull request"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm, vmx: Really fix lazy FPU on nested guest
kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
KVM: MMU: drop read-only large sptes when creating lower level sptes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull ARM64 fixes from Catalin Marinas:
- !CONFIG_SMP build fix
- pte bit testing macros conversion fix (int truncates top bits of
long)
- stack unwinding PC calculation fix
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix !CONFIG_SMP kernel build
arm64: mm: Add double logical invert to pte accessors
ARM64: unwind: Fix PC calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"Here are a few more powerpc fixes for 3.14.
Most of these are also CC'ed to stable and fix bugs in new
functionality introduced in the last 2 or 3 versions"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/powernv: Fix indirect XSCOM unmangling
powerpc/powernv: Fix opal_xscom_{read,write} prototype
powerpc/powernv: Refactor PHB diag-data dump
powerpc/powernv: Dump PHB diag-data immediately
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
powerpc/ftrace: bugfix for test_24bit_addr
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
|
|
Commit fb4a96029c8a (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Dave P Martin <Dave.Martin@arm.com>
|
|
Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.
For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.
This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We need to unmangle the full address, not just the register
number, and we also need to support the real indirect bit
being set for in-kernel uses.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]
|
|
The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]
|
|
As Ben suggested, the patch prints PHB diag-data with multiple
fields in one line and omits the line if the fields of that
line are all zero.
With the patch applied, the PHB3 diag-data dump looks like:
PHB3 PHB#3 Diag-data (Version: 1)
brdgCtl: 00000002
RootSts: 0000000f 00400000 b0830008 00100147 00002000
nFir: 0000000000000000 0030006e00000000 0000000000000000
PhbSts: 0000001c00000000 0000000000000000
Lem: 0000000000100000 42498e327f502eae 0000000000000000
InAErr: 8000000000000000 8000000000000000 0402030000000000 0000000000000000
PE[ 8] A/B: 8480002b00000000 8000000000000000
[ The current diag data is so big that it overflows the printk
buffer pretty quickly in cases when we get a handful of errors
at once which can happen. --BenH
]
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The PHB diag-data is important to help locating the root cause for
EEH errors such as frozen PE or fenced PHB. However, the EEH core
enables IO path by clearing part of HW registers before collecting
this data causing it to be corrupted.
This patch fixes this by dumping the PHB diag-data immediately when
frozen/fenced state on PE or PHB is detected for the first time in
eeh_ops::get_state() or next_error() backend.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The new ELFv2 little-endian ABI increases the stack redzone -- the
area below the stack pointer that can be used for storing data --
from 288 bytes to 512 bytes. This means that we need to allow more
space on the user stack when delivering a signal to a 64-bit process.
To make the code a bit clearer, we define new USER_REDZONE_SIZE and
KERNEL_REDZONE_SIZE symbols in ptrace.h. For now, we leave the
kernel redzone size at 288 bytes, since increasing it to 512 bytes
would increase the size of interrupt stack frames correspondingly.
Gcc currently only makes use of 288 bytes of redzone even when
compiling for the new little-endian ABI, and the kernel cannot
currently be compiled with the new ABI anyway.
In the future, hopefully gcc will provide an option to control the
amount of redzone used, and then we could reduce it even more.
This also changes the code in arch_compat_alloc_user_space() to
preserve the expanded redzone. It is not clear why this function would
ever be used on a 64-bit process, though.
Signed-off-by: Paul Mackerras <paulus@samba.org>
CC: <stable@vger.kernel.org> [v3.13]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The branch target should be the func addr, not the addr of func_descr_t.
So using ppc_function_entry() to generate the right target addr.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.
This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.
This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Currently we're storing a host endian RTAS token in
rtas_stop_self_args.token. We then pass that directly to rtas. This is
fine on big endian however on little endian the token is not what we
expect.
This will typically result in hitting:
panic("Alas, I survived.\n");
To fix this we always use the stop-self token in host order and always
convert it to be32 before passing this to rtas.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Commit e504c9098ed6 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.
nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup. In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.
The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.
Fixes: e504c9098ed6acd9e1079c5e10e4910724ad429f
Reported-by: Kashyap Chamarty <kchamart@redhat.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Kashyap Chamarty <kchamart@redhat.com>
Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address. When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one. On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.
As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio. In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented. The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer. If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.
However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.
Fixes: f78146b0f9230765c6315b2e14f56112513389ad
Signed-off-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org (3.5+)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added
support for CPU power-management, using a cpu_notifier to re-init
KVM on a CPU that entered CPU idle.
The code assumed that a CPU entering idle would actually be powered
off, loosing its state entierely, and would then need to be
reinitialized. It turns out that this is not always the case, and
some HW performs CPU PM without actually killing the core. In this
case, we try to reinitialize KVM while it is still live. It ends up
badly, as reported by Andre Przywara (using a Calxeda Midway):
[ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760
[ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150
[ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0
The trick here is to detect if we've been through a full re-init or
not by looking at HVBAR (VBAR_EL2 on arm64). This involves
implementing the backend for __hyp_get_vectors in the main KVM HYP
code (rather small), and checking the return value against the
default one when the CPU notifier is called on CPU_PM_EXIT.
Reported-by: Andre Przywara <osp@andrep.de>
Tested-by: Andre Przywara <osp@andrep.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <rob.herring@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures,
with perf WARN_ON()s triggering. He also provided traces of the failures.
This is I think the relevant bit:
> pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_disable: x86_pmu_disable
> pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_state: Events: {
> pec_1076_warn-2804 [000] d... 147.926156: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null))
> pec_1076_warn-2804 [000] d... 147.926158: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800)
> pec_1076_warn-2804 [000] d... 147.926159: x86_pmu_state: }
> pec_1076_warn-2804 [000] d... 147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1
> pec_1076_warn-2804 [000] d... 147.926161: x86_pmu_state: Assignment: {
> pec_1076_warn-2804 [000] d... 147.926162: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800)
> pec_1076_warn-2804 [000] d... 147.926163: x86_pmu_state: }
> pec_1076_warn-2804 [000] d... 147.926166: collect_events: Adding event: 1 (ffff880119ec8800)
So we add the insn:p event (fd[23]).
At this point we should have:
n_events = 2, n_added = 1, n_txn = 1
> pec_1076_warn-2804 [000] d... 147.926170: collect_events: Adding event: 0 (ffff8800c9e01800)
> pec_1076_warn-2804 [000] d... 147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00)
We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]).
These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so
that's not visible.
group_sched_in()
pmu->start_txn() /* nop - BP pmu */
event_sched_in()
event->pmu->add()
So here we should end up with:
0: n_events = 3, n_added = 2, n_txn = 2
4: n_events = 4, n_added = 3, n_txn = 3
But seeing the below state on x86_pmu_enable(), the must have failed,
because the 0 and 4 events aren't there anymore.
Looking at group_sched_in(), since the BP is the leader, its
event_sched_in() must have succeeded, for otherwise we would not have
seen the sibling adds.
But since neither 0 or 4 are in the below state; their event_sched_in()
must have failed; but I don't see why, the complete state: 0,0,1:p,4
fits perfectly fine on a core2.
However, since we try and schedule 4 it means the 0 event must have
succeeded! Therefore the 4 event must have failed, its failure will
have put group_sched_in() into the fail path, which will call:
event_sched_out()
event->pmu->del()
on 0 and the BP event.
Now x86_pmu_del() will reduce n_events; but it will not reduce n_added;
giving what we see below:
n_event = 2, n_added = 2, n_txn = 2
> pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_enable: x86_pmu_enable
> pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_state: Events: {
> pec_1076_warn-2804 [000] d... 147.926179: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null))
> pec_1076_warn-2804 [000] d... 147.926181: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800)
> pec_1076_warn-2804 [000] d... 147.926182: x86_pmu_state: }
> pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2
> pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: Assignment: {
> pec_1076_warn-2804 [000] d... 147.926186: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800)
> pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: 1->0 tag: 1 config: 1 (ffff880119ec8800)
> pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: }
> pec_1076_warn-2804 [000] d... 147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0
So the problem is that x86_pmu_del(), when called from a
group_sched_in() that fails (for whatever reason), and without x86_pmu
TXN support (because the leader is !x86_pmu), will corrupt the n_added
state.
Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Read-only large sptes can be created due to read-only faults as
follows:
- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).
Fix by dropping large spte when necessary.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This silences build warnings about unexported variables and functions.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20140209215644.GA30339@www.outflux.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Include kASLR offset in VMCOREINFO ELF notes to assist in debugging.
[ hpa: pushing this for v3.14 to avoid having a kernel version with
kASLR where we can't debug output. ]
Signed-off-by: Eugene Surovegin <surovegin@google.com>
Link: http://lkml.kernel.org/r/20140123173120.GA25474@www.outflux.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven:
- More barrier.h consolidation
- Sched_[gs]etattr() syscalls
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up sched_setattr and sched_getattr
m68k: Switch to asm-generic/barrier.h
m68k: Sort arch/m68k/include/asm/Kbuild
|
|
Pull tensa fixes from Chris Zankel:
"This series includes fixes for potentially serious bugs in the
routines spilling processor registers to stack, as well as other
issues and compiler errors and warnings.
- allow booting xtfpga on boards with new uBoot and >128MBytes memory
- drop nonexistent GPIO32 support from fsf variant
- don't select USE_GENERIC_SMP_HELPERS
- enable common clock framework support, set up ethoc clock on xtfpga
- wire up sched_setattr and sched_getattr syscalls.
- fix system call to spill the processor registers to stack.
- improve kernel macro to spill the processor registers
- export ccount_freq symbol
- fix undefined symbol warning"
* tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux:
xtensa: wire up sched_setattr and sched_getattr syscalls
xtensa: xtfpga: set ethoc clock frequency
xtensa: xtfpga: use common clock framework
xtensa: support common clock framework
xtensa: no need to select USE_GENERIC_SMP_HELPERS
xtensa: fsf: drop nonexistent GPIO32 support
xtensa: don't pass high memory to bootmem allocator
xtensa: fix fast_syscall_spill_registers
xtensa: fix fast_syscall_spill_registers
xtensa: save current register frame in fast_syscall_spill_registers_fixup
xtensa: introduce spill_registers_kernel macro
xtensa: export ccount_freq
xtensa: fix warning '"CONFIG_OF" is not defined'
|
|
into clk-fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 bug fixes from Martin Schwidefsky:
"A couple of s390 bug fixes. The PCI segment boundary issue is a nasty
one as it can lead to data corruption"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix missing subchannels after CHPID configure on
s390/pci/dma: use correct segment boundary size
s390/compat: fix sys_sched_getattr compat wrapper
s390/zcrypt: additional check to avoid overflow in msg-type 6 requests
|
|
Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
|
