aboutsummaryrefslogtreecommitdiff
path: root/arch/riscv/configs
AgeCommit message (Collapse)Author
2021-09-10riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1Heinrich Schuchardt
The EFI system partition uses the FAT file system. Many distributions add an entry in /etc/fstab for the ESP. We must ensure that mounting does not fail. The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE). The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1). So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10riscv: defconfig: enable BLK_DEV_NVMEHeinrich Schuchardt
NVMe is a non-volatile storage media attached via PCIe. As NVMe has much higher throughput than other block devices like SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME. The HiFive Unmatched is a board providing M.2 slots for NVMe drives. Enable CONFIG_PCIE_FU740. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-24block: remove CONFIG_DEBUG_BLOCK_EXT_DEVTChristoph Hellwig
This might have been a neat debug aid when the extended dev_t was added, but that time is long gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210824075216.1179406-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-26RISC-V: Enable Microchip PolarFire ICICLE SoCAtish Patra
Enable Microchip PolarFire ICICLE soc config in defconfig. It allows the default upstream kernel to boot on PolarFire ICICLE board. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bin.meng@windriver.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-26RISC-V: Enable CPU Hotplug in defconfigsAnup Patel
The CPU hotplug support has been tested on QEMU, Spike, and SiFive Unleashed so let's enable it by default in RV32 and RV64 defconfigs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-22riscv: Add Canaan Kendryte K210 SD card defconfigDamien Le Moal
The nommu_k210_defconfig default configuration allows booting a Canaan Kendryte K210 SoC based boards using an embedded intramfs cpio file. Modifying this configuration to enable support for the board SD card is not trivial for all users. To help beginners getting started with these boards, add the nommu_k210_sdcard_defconfig default configuration file to set all configuration options necessary to use the board mmc-spi sd card for the root file system. This new configuration adds support for the block layer, the mmc-spi driver and modifies the boot options to specify the rootfs device as mmcblk0p1 (first partition of the sd card block device). The ext2 file system is selected by default to encourage its use as that results in only about 4KB added to the kernel image size. As ext2 does not have journaling, the boot options specify a read-only mount of the file system. Similarly to the smaller nommu_k210_defconfig, this new default configuration disables virtual terminal support to reduce the kernel image size. The default device tree selected is unchanged, specifying the simple "k210_generic" device tree file. The user must change this setting to specify the device tree suitable for the board being used (sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or canaan_kd233). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22riscv: Update Canaan Kendryte K210 defconfigDamien Le Moal
Update the Kendryte k210 nommu default configuration file (nommu_k210_defconfig) to include device drivers for reset, reboot, I2C, SPI, gpio and LEDs support. Virtual Terminal support is also disabled as no terminal devices are supported and enabled. Disabling CONFIG_VT (removing the no longer needed override for CONFIG_VGA_CONSOLE) reduces the kernel image size by about 65 KB. This default configuration remains suitable for a system using an initramfs cpio file linked into the kernel image. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-14riscv: Use vendor name for K210 SoC supportDamien Le Moal
Rename configuration options and directories related to the Kendryte K210 SoC to use the SoC vendor name (canaan) instead of the "kendryte" branding name. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-13riscv: defconfig: enable gpio support for HiFive UnleashedSagar Shrikant Kadam
Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line connected to a gpio, so enable GPIO driver's required to reset the phy. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-02RISC-V: Add EFI stub support.Atish Patra
Add a RISC-V architecture specific stub code that actually copies the actual kernel image to a valid address and jump to it after boot services are terminated. Enable UEFI related kernel configs as well for RISC-V. Signed-off-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20200421033336.9663-4-atish.patra@wdc.com [ardb: - move hartid fetch into check_platform_features() - use image_size not reserve_size - select ISA_C - do not use dram_base] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20riscv: Add SiFive drivers to rv32_defconfigBin Meng
This adds SiFive drivers to rv32_defconfig, to keep in sync with the 64-bit config. This is useful when testing 32-bit kernel with QEMU 'sifive_u' 32-bit machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20RISC-V: Remove CLINT related code from timer and archAnup Patel
Right now the RISC-V timer driver is convoluted to support: 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for clocksource and SBI timer calls for clockevent device. 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO counter register for clocksource and CLINT MMIO compare register for clockevent device. We now have a separate CLINT timer driver which also provide CLINT based IPI operations so let's remove CLINT MMIO related code from arch/riscv directory and RISC-V timer driver. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-30riscv: Add jump-label implementationEmil Renner Berthing
Add jump-label implementation based on the ARM64 version and add CONFIG_JUMP_LABEL=y to the defconfigs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Björn Töpel <bjorn.topel@gmail.com> Tested-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-18riscv: K210: Update defconfigDamien Le Moal
Update the Kendryte K210 default kernel configuration file nommu_k210_defconfig to enable builtin DTB by default. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-04-09Merge tag 'riscv-for-linus-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...
2020-04-03riscv: Kendryte K210 default configDamien Le Moal
This patch adds a defconfig file to build No-MMU kernels meant for boards based on the Kendryte K210 SoC. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26RISC-V: Only select essential drivers for SOC_VIRT configAnup Patel
The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03riscv: Delete CONFIG_SYSFS_SYSCALL from defconfigsDeepa Dinamani
According to init/Kconfig: "sys_sysfs is an obsolete system call no longer supported in libc. Note that disabling this option is more secure but might break compatibility with some systems." This syscall is not required for new architectures. Since the config defaults to 'y'. Set this to 'n' exlicitly. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22Merge branch 'next/defconfig-add-debug' into for-nextPaul Walmsley
2019-11-22riscv: defconfigs: enable more debugging optionsPaul Walmsley
Enable more debugging options in the RISC-V defconfigs to help kernel developers catch problems with patches earlier in the development cycle. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22riscv: defconfigs: enable debugfsPaul Walmsley
debugfs is broadly useful, so enable it in the RISC-V defconfigs. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-17riscv: add nommu supportChristoph Hellwig
The kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware. Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation: - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack. In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line: qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards around PCI_IOBASE definition to fix build issues; fixed checkpatch issues; move the PCI_IO_* and VMEMMAP address space macros along with the others; resolve sparse warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-19RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfigAnup Patel
This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-13riscv: defconfig: Update the defconfigAlistair Francis
Update the defconfig: - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable VirtIORNG when running on QEMU Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-13riscv: rv32_defconfig: Update the defconfigAlistair Francis
Update the rv32_defconfig: - Add 'CONFIG_DEVTMPFS_MOUNT=y' to match the RISC-V defconfig - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable VirtIORNG when running on QEMU Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-31riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig"Paul Walmsley
Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-01riscv: defconfig: enable SOC_SIFIVELoys Ollivier
Enable SOC_SIFIVE so the default upstream config is bootable on the SiFive Unleashed Board. And have basic support for future boards based on the same SoC. Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-01RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERSAnup Patel
This patch enables NO_HZ_IDLE (idle dynamic ticks) and HIGH_RES_TIMERS (hrtimers) in RV32 and RV64 defconfigs. Both of the above options are enabled by default for architectures such as x86, ARM, and ARM64. The idle dynamic ticks helps use save power by stopping timer ticks when the system is idle whereas hrtimers is a much improved timer subsystem compared to the old "timer wheel" based system. This patch is tested on SiFive Unleashed board and QEMU Virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-26RISC-V: defconfig: enable MMC & SPI for RISC-VAtish Patra
Currently, riscv upstream defconfig doesn't let you boot through userspace if rootfs is on the SD card. Let's enable MMC & SPI drivers as well so that one can boot to the user space using default config in upstream kernel. While here, enable automatic mounting of devtmpfs to simplify kernel testing with minimal root filesystems. (pjw) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: mention the DEVTMPFS_MOUNT change in the patch description] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-11RISC-V: defconfig: enable clocks, serial consoleKevin Hilman
Enable PRCI clock driver and serial console by default, so the default upstream defconfig is bootable to a serial console. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-04-09RISC-V: Add separate defconfig for 32bit systemsAnup Patel
This patch adds rv32_defconfig for 32bit systems. The only difference between rv32_defconfig and defconfig is that rv32_defconfig has CONFIG_ARCH_RV32I=y. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=yPalmer Dabbelt
This allows acceleration of cryptography inside QEMU. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23RISC-V: defconfig: Enable Generic PCIE by defaultAlistair Francis
Enable generic PCIe by default in the RISC-V defconfig, this allows us to use QEMU's PCIe support out of the box. CONFIG_RAS=y is automatically selected by generic PCIe, so it has been dropped from the defconfig. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Split out PCIE_XILINX and CRYPTO_DEV_VIRTIO] Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-23RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX}Palmer Dabbelt
eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci") reorganized the PCI-related Kconfig entries and resulted in a diff in our defconfig. This simply removes the diff. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-17RISC-V: defconfig: Enable RISC-V SBI earlycon supportAnup Patel
This patch enables RISC-V SBI earlycon support in default defconfig so that we can use "earlycon=sbi" in kernel parameters for early debug prints. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12RISC-V: defconfig: Enable printk timestampsAnup Patel
The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01RISC-V: refresh defconfigAnup Patel
This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13irqchip: add a SiFive PLIC driverChristoph Hellwig
Add a driver for the SiFive implementation of the RISC-V Platform Level Interrupt Controller (PLIC). The PLIC connects global interrupt sources to the local interrupt controller on each hart. This driver is based on the driver in the RISC-V tree from Palmer Dabbelt, but has been almost entirely rewritten since, and includes many fixes from Atish Patra. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> [Binding update by Palmer] Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfigPalmer Dabbelt
The SBI exists on all RISC-V systems, so there's no reason not to compile this driver in. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02RISC-V: Enable module support in defconfigZong Li
Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-07RISC-V: Add a basic defconfigKarsten Merker
This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-09-26RISC-V: Build InfrastructurePalmer Dabbelt
This patch contains all the build infrastructure that actually enables the RISC-V port. This includes Makefiles, linker scripts, and Kconfig files. It also contains the only top-level change, which adds RISC-V to the list of architectures that need a sed run to produce the ARCH variable when building locally. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>