aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)Author
2020-12-14Merge tag 'perf-core-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Core: - Better handling of page table leaves on archictectures which have architectures have non-pagetable aligned huge/large pages. For such architectures a leaf can actually be part of a larger entry. - Prevent a deadlock vs exec_update_mutex Architectures: - The related updates for page size calculation of leaf entries - The usual churn to support new CPUs - Small fixes and improvements all over the place" * tag 'perf-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) perf/x86/intel: Add Tremont Topdown support uprobes/x86: Fix fall-through warnings for Clang perf/x86: Fix fall-through warnings for Clang kprobes/x86: Fix fall-through warnings for Clang perf/x86/intel/lbr: Fix the return type of get_lbr_cycles() perf/x86/intel: Fix rtm_abort_event encoding on Ice Lake x86/kprobes: Restore BTF if the single-stepping is cancelled perf: Break deadlock involving exec_update_mutex sparc64/mm: Implement pXX_leaf_size() support powerpc/8xx: Implement pXX_leaf_size() support arm64/mm: Implement pXX_leaf_size() support perf/core: Fix arch_perf_get_page_size() mm: Introduce pXX_leaf_size() mm/gup: Provide gup_get_pte() more generic perf/x86/intel: Add event constraint for CYCLE_ACTIVITY.STALLS_MEM_ANY perf/x86/intel/uncore: Add Rocket Lake support perf/x86/msr: Add Rocket Lake CPU support perf/x86/cstate: Add Rocket Lake CPU support perf/x86/intel: Add Rocket Lake CPU support perf,mm: Handle non-page-table-aligned hugetlbfs ...
2020-12-14Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Expose tag address bits in siginfo. The original arm64 ABI did not expose any of the bits 63:56 of a tagged address in siginfo. In the presence of user ASAN or MTE, this information may be useful. The implementation is generic to other architectures supporting tags (like SPARC ADI, subject to wiring up the arch code). The user will have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if available, become visible in si_addr. - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the lowest 1GB to cope with the Raspberry Pi 4 limitations, to the detriment of other platforms. With these changes, the kernel scans the Device Tree dma-ranges and the ACPI IORT information before deciding on a smaller ZONE_DMA. - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building with LTO, there is an increased risk of the compiler converting an address dependency headed by a READ_ONCE() invocation into a control dependency and consequently allowing for harmful reordering by the CPU. - Add CPPC FFH support using arm64 AMU counters. - set_fs() removal on arm64. This renders the User Access Override (UAO) ARMv8 feature unnecessary. - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs identifier file for SMMUv3, stop event counters support for i.MX8MP, enable the perf events-based hard lockup detector. - Reorganise the kernel VA space slightly so that 52-bit VA configurations can use more virtual address space. - Improve the robustness of the arm64 memory offline event notifier. - Pad the Image header to 64K following the EFI header definition updated recently to increase the section alignment to 64K. - Support CONFIG_CMDLINE_EXTEND on arm64. - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8 bits for PtrAuth. - Switch to vmapped shadow call stacks. - Miscellaneous clean-ups. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits) perf/imx_ddr: Add system PMU identifier for userspace bindings: perf: imx-ddr: add compatible string arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE arm64: mark __system_matches_cap as __maybe_unused arm64: uaccess: remove vestigal UAO support arm64: uaccess: remove redundant PAN toggling arm64: uaccess: remove addr_limit_user_check() arm64: uaccess: remove set_fs() arm64: uaccess cleanup macro naming arm64: uaccess: split user/kernel routines arm64: uaccess: refactor __{get,put}_user arm64: uaccess: simplify __copy_user_flushcache() arm64: uaccess: rename privileged uaccess routines arm64: sdei: explicitly simulate PAN/UAO entry arm64: sdei: move uaccess logic to arch/arm64/ arm64: head.S: always initialize PSTATE arm64: head.S: cleanup SCTLR_ELx initialization arm64: head.S: rename el2_setup -> init_kernel_el arm64: add C wrappers for SET_PSTATE_*() ...
2020-12-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-12-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes for ARM, x86 and tools" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools/kvm_stat: Exempt time-based counters KVM: mmu: Fix SPTE encoding of MMIO generation upper half kvm: x86/mmu: Use cpuid to determine max gfn kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit() selftests: kvm/set_memory_region_test: Fix race in move region test KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort() KVM: arm64: Fix handling of merging tables into a block entry KVM: arm64: Fix memory leak on stage2 update of a valid PTE
2020-12-11Add and use a generic version of devmem_is_allowed()Palmer Dabbelt
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed()
2020-12-11arm64: Use the generic devmem_is_allowed()Palmer Dabbelt
I recently copied this into lib/ for use by the RISC-V port. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-10Merge tag 'kvmarm-fixes-5.10-5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD kvm/arm64 fixes for 5.10, take #5 - Don't leak page tables on PTE update - Correctly invalidate TLBs on table to block transition - Only update permissions if the fault level matches the expected mapping size
2020-12-10Merge branch 'sparx5-next' of ↵Arnd Bergmann
https://github.com/microchip-ung/linux-upstream into arm/dt * 'sparx5-next' of https://github.com/microchip-ung/linux-upstream: arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support Link: https://lore.kernel.org/r/87ft4dq2q8.fsf@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-10arm64: dts: sparx5: Add SGPIO devicesLars Povlsen
This adds SGPIO devices for the Sparx5 SoC and configures it for the applicable reference boards. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201113145151.68900-4-lars.povlsen@microchip.com
2020-12-10arm64: dts: sparx5: Add reset supportLars Povlsen
This adds reset support to the Sparx5 SoC DT. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Link: https://lore.kernel.org/r/20201006200316.2261245-4-lars.povlsen@microchip.com
2020-12-09Merge remote-tracking branch 'arm64/for-next/fixes' into for-next/coreCatalin Marinas
* arm64/for-next/fixes: (26 commits) arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect() arm64: pgtable: Fix pte_accessible() ACPI/IORT: Fix doc warnings in iort.c arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist ... # Conflicts: # arch/arm64/include/asm/exception.h # arch/arm64/kernel/sdei.c
2020-12-09Merge remote-tracking branch 'arm64/for-next/scs' into for-next/coreCatalin Marinas
* arm64/for-next/scs: arm64: sdei: Push IS_ENABLED() checks down to callee functions arm64: scs: use vmapped IRQ and SDEI shadow stacks scs: switch to vmapped shadow stacks
2020-12-09Merge remote-tracking branch 'arm64/for-next/perf' into for-next/coreCatalin Marinas
* arm64/for-next/perf: perf/imx_ddr: Add system PMU identifier for userspace bindings: perf: imx-ddr: add compatible string arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled arm64: Enable perf events based hard lockup detector perf/imx_ddr: Add stop event counters support for i.MX8MP perf/smmuv3: Support sysfs identifier file drivers/perf: hisi: Add identifier sysfs file perf: remove duplicate check on fwnode driver/perf: Add PMU driver for the ARM DMC-620 memory controller
2020-12-09Merge branch 'for-next/misc' into for-next/coreCatalin Marinas
* for-next/misc: : Miscellaneous patches arm64: vmlinux.lds.S: Drop redundant *.init.rodata.* kasan: arm64: set TCR_EL1.TBID1 when enabled arm64: mte: optimize asynchronous tag check fault flag check arm64/mm: add fallback option to allocate virtually contiguous memory arm64/smp: Drop the macro S(x,s) arm64: consistently use reserved_pg_dir arm64: kprobes: Remove redundant kprobe_step_ctx # Conflicts: # arch/arm64/kernel/vmlinux.lds.S
2020-12-09Merge branch 'for-next/uaccess' into for-next/coreCatalin Marinas
* for-next/uaccess: : uaccess routines clean-up and set_fs() removal arm64: mark __system_matches_cap as __maybe_unused arm64: uaccess: remove vestigal UAO support arm64: uaccess: remove redundant PAN toggling arm64: uaccess: remove addr_limit_user_check() arm64: uaccess: remove set_fs() arm64: uaccess cleanup macro naming arm64: uaccess: split user/kernel routines arm64: uaccess: refactor __{get,put}_user arm64: uaccess: simplify __copy_user_flushcache() arm64: uaccess: rename privileged uaccess routines arm64: sdei: explicitly simulate PAN/UAO entry arm64: sdei: move uaccess logic to arch/arm64/ arm64: head.S: always initialize PSTATE arm64: head.S: cleanup SCTLR_ELx initialization arm64: head.S: rename el2_setup -> init_kernel_el arm64: add C wrappers for SET_PSTATE_*() arm64: ensure ERET from kthread is illegal
2020-12-09Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', ↵Catalin Marinas
'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core * for-next/kvm-build-fix: : Fix KVM build issues with 64K pages KVM: arm64: Fix build error in user_mem_abort() * for-next/va-refactor: : VA layout changes arm64: mm: don't assume struct page is always 64 bytes Documentation/arm64: fix RST layout of memory.rst arm64: mm: tidy up top of kernel VA space arm64: mm: make vmemmap region a projection of the linear region arm64: mm: extend linear region for 52-bit VA configurations * for-next/lto: : Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y arm64: alternatives: Remove READ_ONCE() usage during patch operation arm64: cpufeatures: Add capability for LDAPR instruction arm64: alternatives: Split up alternative.h arm64: uaccess: move uao_* alternatives to asm-uaccess.h * for-next/mem-hotplug: : Memory hotplug improvements arm64/mm/hotplug: Ensure early memory sections are all online arm64/mm/hotplug: Enable MEM_OFFLINE event handling arm64/mm/hotplug: Register boot memory hot remove notifier earlier arm64: mm: account for hotplug memory when randomizing the linear region * for-next/cppc-ffh: : Add CPPC FFH support using arm64 AMU counters arm64: abort counter_read_on_cpu() when irqs_disabled() arm64: implement CPPC FFH support using AMUs arm64: split counter validation function arm64: wrap and generalise counter read functions * for-next/pad-image-header: : Pad Image header to 64KB and unmap it arm64: head: tidy up the Image header definition arm64/head: avoid symbol names pointing into first 64 KB of kernel image arm64: omit [_text, _stext) from permanent kernel mapping * for-next/zone-dma-default-32-bit: : Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4) of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS mm: Remove examples from enum zone_type comment arm64: mm: Set ZONE_DMA size based on early IORT scan arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges of: unittest: Add test for of_dma_get_max_cpu_address() of/address: Introduce of_dma_get_max_cpu_address() arm64: mm: Move zone_dma_bits initialization into zone_sizes_init() arm64: mm: Move reserve_crashkernel() into mem_init() arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required arm64: Ignore any DMA offsets in the max_zone_phys() calculation * for-next/signal-tag-bits: : Expose the FAR_EL1 tag bits in siginfo arm64: expose FAR_EL1 tag bits in siginfo signal: define the SA_EXPOSE_TAGBITS bit in sa_flags signal: define the SA_UNSUPPORTED bit in sa_flags arch: provide better documentation for the arch-specific SA_* flags signal: clear non-uapi flag bits when passing/returning sa_flags arch: move SA_* definitions to generic headers parisc: start using signal-defs.h parisc: Drop parisc special case for __sighandler_t * for-next/cmdline-extended: : Add support for CONFIG_CMDLINE_EXTENDED arm64: Extend the kernel command line from the bootloader arm64: kaslr: Refactor early init command line parsing
2020-12-09Merge tag 'zynqmp-dt-for-v5.11' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/dt arm64: dts: ZynqMP DT changes for v5.11 - Wiring IPI communication channel with firmware driver - Taking GIC to main bus to have only one - Small fix in zynqmp.dtsi reported by dt_binding_check * tag 'zynqmp-dt-for-v5.11' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Wire mailbox with zynqmp-power driver arm64: dts: zynqmp: Fix pcie ranges description arm64: zynqmp: Move gic node to axi bus Link: https://lore.kernel.org/r/f460f6ac-d235-a33b-3d0f-ca904a43e687@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09arm64: Kconfig: meson: drop pinctrlKevin Hilman
Don't automatically select pinctrl drivers, leave it up to defaults in drivers/pinctrl/meson, which default to built-in, but are also now optionally configurable as modules as of commit 9c65441ec823 ("pinctrl/meson: enable building as modules") Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201207230156.10198-1-khilman@baylibre.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'amlogic-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/soc arm64: Kconfig.platform: amlogic updates for v5.11 - ship only the necessary clock controllers * tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: meson: ship only the necessary clock controllers Link: https://lore.kernel.org/r/7hlfehjgv8.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge remote-tracking branch 'origin/kvm-arm64/psci-relay' into ↵Marc Zyngier
kvmarm-master/next Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-09efi: stub: get rid of efi_get_max_fdt_addr()Ard Biesheuvel
Now that ARM started following the example of arm64 and RISC-V, and no longer imposes any restrictions on the placement of the FDT in memory at boot, we no longer need per-arch implementations of efi_get_max_fdt_addr() to factor out the differences. So get rid of it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org
2020-12-09efi: capsule: clean scatter-gather entries from the D-cacheArd Biesheuvel
Scatter-gather lists passed to UpdateCapsule() should be cleaned from the D-cache to ensure that they are visible to the CPU after a warm reboot before the MMU is enabled. On ARM and arm64 systems, this implies a D-cache clean by virtual address to the point of coherency. However, due to the fact that the firmware itself is not able to map physical addresses back to virtual addresses when running under the OS, this must be done by the caller. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-12-09Merge tag 'sunxi-fixes-for-5.10-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.11, round 2 - audio support for several more boards - PHY timing fixes * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add i2c3/rtc nodes and vrtc alias to GT-King/GT-King-Pro arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements ARM: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements arm64: dts: meson: minor fixups for Khadas VIM/VIM2 dts arm64: dts: meson: add audio playback to wetek-play2 arm64: dts: meson: add audio playback to wetek-hub arm64: dts: meson: add audio playback to odroid-c2 arm64: dts: meson: add audio playback to nanopi-k2 arm64: dts: meson: add audio playback to khadas-vim2 arm64: dts: meson: add audio playback to khadas-vim arm64: dts: meson: add audio playback to a95x arm64: dts: meson-axg: add GE2D node Link: https://lore.kernel.org/r/7ho8j4gkxo.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'v5.11-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Veyron backlight fix, another fix for dtbs-check and some additions to the rk3288-based VMARC boards. * tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SDIO0 node for VMARC SOM ARM: dts: rockchip: Add rtc node for VMARC SOM ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108 ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyron Link: https://lore.kernel.org/r/4582475.GXAFRqVoOG@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'v5.11-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Newly added boards are the PX30 SOM system from Engicam and Kobol Helios64. The Scarlet tablet finally gets support for its cameras, now that the the rk3399-isp moved out of staging. The Odroid-Go-Advance got its joystick support now that the adc-joystick driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc and orange-pi. * tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits) arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4 arm64: dts: rockchip: fix I2S conflict on rk3399-rock-pi-4 arm64: dts: rockchip: fix supplies on rk3399-rock-pi-4 arm64: dts: rockchip: Fix UART pull-ups on rk3328 arm64: dts: rockchip: add isp and sensors for Scarlet arm64: dts: rockchip: add isp0 node for rk3399 arm64: dts: rockchip: Properly define the type C connector on rk3399-orangepi arm64: dts: rockchip: Add BT support on px30-engicam arm64: dts: rockchip: Add WiFi support on px30-engicam arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF arm64: dts: rockchip: Enable LVDS panel on px30-engicam-edimm2.2 arm64: dts: rockchip: Enable USB Host, OTG on px30-enagicam arm64: dts: rockchip: rename sdhci nodename to mmc on rk3399 arm64: dts: rockchip: Enable analog audio on rk3328-roc-cc arm64: dts: rockchip: Enable HDMI audio on rk3328-roc-cc arm64: dts: rockchip: Set dr_mode to "host" for OTG on rk3328-roc-cc arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 arm64: dts: rockchip: Add Engicam C.TOUCH 2.0 dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 ... Link: https://lore.kernel.org/r/4278011.LvFx2qVVIh@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'imx-dt64-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree changes for 5.11: - New board support: LX2162A QDS, Kontron i.MX8M Mini SoMs and baseboards. - A number of patches from Adam Ford to add various audio devices for i.MX8MM/MN and update imx8mm-beacon-som board on QSPI NOR and RTC. - Correct WDOG_B pin configuration for i.MX8MM/MN/MP. - A series from Ioana Ciornei complete the MAC/PCS/PHY representation on DPAA2 devices. - Add PMU device for i.MX8MP/MN. - Add IR and CAN support for i.MX8MP/MN/MM EVK board. - Adjust GIC CPU mask to match number of CPUs for i.MX8MP/MN/MM. - A series of patch from Michael Walle to update LS1028A support with addition of CAN and OPTEE, also ENETC PTP and FlexSPI clock input correction. - Add SPDIF sound card support on imx8mq-evk board. - Misc random updates and device additions. * tag 'imx-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) arm64: dts: imx8mm-beacon-som: Assign PMIC clock arm64: dts: imx8mm-beacon-som: Configure RTC aliases arm64: dts: imx8mn: Add node for SPDIF arm64: dts: imx8mn: Add support for micfil arm64: dts: imx8mn: Add SAI nodes arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter arm64: dts: ls1028a: make the eMMC and SD card controllers use fixed indices arm64: dts: freescale: update calibration table for TMU module arm64: dts: freescale: sl28: combine SPI MTD partitions arm64: dts: ls1028a: add optee node arm64: dts: ls1028a: fix FlexSPI clock input arm64: dts: ls1028a: fix ENETC PTP clock input arm64: dts: imx: Fix imx8mm-kontron-n801x-s.dtb target arm64: dts: imx8mn-evk: add IR support arm64: dts: imx8mm-evk: add IR support arm64: dts: imx8mq-evk: add linux,autosuspend-period property for IR arm64: dts: imx8mp-evk: add CAN support arm64: dts: imx8mq-evk: Add spdif sound card support arm64: dts: imx8mq: Configure clock rate for audio plls arm64: dts: layerscape: Add PCIe EP node for ls1088a ... Link: https://lore.kernel.org/r/20201202142717.9262-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.11 - AXG SoCs: add/enable PCIe & USB OTG support - AXG SoCs: add MIPI DSI support - Khadas VIM: add RTC - several cleanups & fixups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1: fix typo in opp table arm64: dts: meson: add KHAMSIN IR remote node to SML5442TW arm64: dts: meson: update the Khadas VIM3/3L LED bindings arm64: dts: meson: fix spi-max-frequency on Khadas VIM2 arm64: dts: meson: add rtc aliases to meson-khadas-vim3.dtsi arm64: dts: meson: Add capacity-dmips-mhz attributes to GXM arm64: dts: meson-axg-s400: enable PCIe M.2 Key E slots arm64: dts: meson-axg: add PCIe nodes arm64: dts: meson-axg: add MIPI DSI PHY nodes arm64: dts: meson-axg: add PWRC node arm64: dts: meson: enable rtc node on Khadas VIM1/VIM2 boards dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks arm64: dts: meson: add watchdog to g12-common dtsi arm64: dts: meson: remove empty lines from aml-s905x-cc v2 dts Link: https://lore.kernel.org/r/7heek9jgox.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'samsung-dt64-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.11 1. Several cleanups, including aligning node names with dtschema. 2. Add WiFi/PCIe to TM2 boards (Exynos5433). 3. Correct restart and shutdown of Exynos7 boards, as part of Paweł Chmiel Exynos7420 mainlining effort. * tag 'samsung-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Drop incorrect use of io-channel-ranges property arm64: dts: exynos: use hyphens in Exynos5433 node names arm64: dts: exynos: Correct psci compatible used on Exynos7 arm64: dts: exynos: Include common syscon restart/poweroff for Exynos7 arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2 arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2 arm64: dts: exynos: Harmonize DWC USB3 DT nodes name Link: https://lore.kernel.org/r/20201201204404.22675-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'qcom-dts-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DT updates for 5.11 This adds support for SD card, WiFi, LED, touchscreeni, touchkey and fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge support. Finally IPQ6016 gains support for the QPIC NAND controller. * tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: ipq6018: Add the QPIC peripheral nodes ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add support for SD card ARM: dts: qcom: msm8974-klte: Add support for wifi ARM: dts: qcom: msm8974-klte: Add gpio expander chip ARM: dts: qcom: msm8974-klte: Add support for led ARM: dts: qcom: msm8974-klte: Add support for touchscreen ARM: dts: qcom: msm8974-klte: Add support for touchkey ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes Link: https://lore.kernel.org/r/20201130190148.345302-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'qcom-arm64-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'ti-k3-dt-for-v5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Devicetree changes for TI K3 platforms for v5.11 merge window: - Standardized usage of "disabled" only in board.dts files, #interrupt-cells warning fixups, node format error fixes - J721E: R5F support, MMC/SD UHS mode added - AM654: R5F support, dss marked coherent, drop unused dma-ring-reset-quirk property - J7200: ADC support, Mailbox, hwspinlock * tag 'ti-k3-dt-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (25 commits) arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes arm64: dts: ti: k3-j721e-main: Add output tap delay values arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells arm64: dts: ti: k3-j7200-common-proc-board: Correct the name of io expander on main_i2c1 arm64: dts: ti: k3-j7200-som-p0: main_i2c0 have an ioexpander on the SOM arm64: dts: ti: k3-j7200-som-p0: Add IPC sub-mailbox nodes arm64: dts: ti: k3-j7200-main: Add mailbox cluster nodes arm64: dts: ti: k3-j7200-main: Add hwspinlock node arm64: dts: ti: am65/j721e/j7200: Mark firmware used uart as "reserved" arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB arm64: dts: ti: am65/j721e: Fix up un-necessary status set to "okay" for crypto arm64: dts: ti: k3-j721e*: Cleanup disabled nodes at SoC dtsi level arm64: dts: ti: k3-am65*: Cleanup disabled nodes at SoC dtsi level arm64: dts: ti: k3-j7200-mcu-wakeup: Enable ADC support arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for R5Fs arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to R5Fs arm64: dts: ti: k3-j721e-main: Add MAIN domain R5F cluster nodes arm64: dts: ti: k3-j721e-mcu: Add MCU domain R5F cluster node arm64: dts: ti: k3-am654-base-board: Reserve memory for IPC between R5F cores ... Link: https://lore.kernel.org/r/20201130174258.ljsiokkyr7x7tsbd@covenant Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'mvebu-dt64-5.11-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.11 (part 1) - Add support for IEI Puzzle-M801 board (Armada 8040 based) - Add support ESPRESSObin-Ultra (Armada 3720 based) - Clean-up and improve espressobin device tree - Switch to per-port SATA interrupts on CP110 based SoC - Use compliant node name for USB3 on CP110 based SoC - Add heartbeat LED on mcbin singleshot - Disable SMMU by default for Armada 7040 and 8040 to continued supporting custom bot firmware - Turris mox: - add 3W power capability to SFP cage - update ethernet-phy handle name * tag 'mvebu-dt64-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage arm64: dts: marvell: keep SMMU disabled by default for Armada 7040 and 8040 arm64: dts: mcbin-singleshot: add heartbeat LED arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name arm64: dts: marvell: espressobin: Update link to V7 schematic arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts arm64: dts: marvell: add DT for ESPRESSObin-Ultra arm64: dts: marvell: espressobin: Add support for LED2 arm64: dts: marvell: Add a device tree for the IEI Puzzle-M801 board arm64: dts: marvell: espressobin: De-duplicate eMMC definitions arm64: dts: marvell: espressobin: Get rid of duplicate serial aliases arm64: dts: marvell: espressobin: Simplify v7 ethernet port labeling Link: https://lore.kernel.org/r/87eekaj0i4.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'v5.10-next-dts64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - add new power domain controller node mt8183: - add new power domain controller - add display, iommu and dsi nodes mt8192: - add basic support, pinctrl, uart, spi, i2c and timer mt8516: - add auxadc, efuse and usb nodes mt8167: - add basic support for the SoC - add support for the pumkin board mt6779: - add initial support, interrupt controller, clocks, uart mt7622: - PWM node for all available PWM channels * tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) dts64: mt7622: disable spi1 and uart2 because pins are used by pwm dts64: mt7622: enable all pwm for bananapi r64 arm64: dts: mt8183: Add display nodes for MT8183 arm64: dts: mt8183: Add iommu and larb nodes arm64: dts: mt8183: Add dsi node arm64: dts: mt8183: Add pwm and backlight node arm64: dts: mediatek: Add mt8183 power domains controller arm64: dts: mediatek: Add smi_common node for MT8183 arm64: dts: mediatek: Add mt8173 power domain controller dt-bindings: power: Add MT8192 power domains dt-bindings: power: Add MT8183 power domains dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile arm64: dts: mediatek: add MT8167 pumpkin board dts arm64: dts: mediatek: add dtsi for MT8167 dt-bindings: arm64: dts: mediatek: Add mt8167-pumpkin board arm64: dts: mediatek: mt8516: add efuse node arm64: dts: mediatek: align GPIO hog names with dtschema arm64: dts: mediatek: mt8516: add usb1 node arm64: dts: mediatek: mt8516: rename usb phy ... Link: https://lore.kernel.org/r/72fe1c4f-f27c-c455-dfd9-66bde90bb295@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'arm-soc/for-5.11/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.11, please pull the following: - Rafal adds initial support for the Broadcom 4908 which are SoCs used in home routers and are based on the DSL architecture and using Broadcom Brahma-B53 CPUs. * tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: add config for Broadcom BCM4908 SoCs arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files dt-bindings: arm: bcm: document BCM4908 bindings Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'sunxi-dt-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Some nice pinephone additions - I2S support for the A64, H3, H5 and H6 - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1 * tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names ARM: dts: sun8i: h3: Add initial NanoPi R1 support arm64: dts: allwinner: pinephone: Use generic sensor node names ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC dt-bindings: arm: sunxi: add Elimo bindings ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM arm64: dts: allwinner: pinephone: Add Bluetooth support arm64: dts: allwinner: pinephone: Add WiFi support arm64: dts: allwinner: pinephone: Add light/proximity sensor arm64: dts: allwinner: pinephone: Add LED flash arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 arm64: dts: allwinner: pinephone: Remove AC power supply arm: dts: sunxi: h3/h5: Add I2S2 node arm64: dts: allwinner: a64: Add I2S2 node arm64: dts: allwinner: h6: Add I2S1 node arm64: dts: allwinner: h6: PineH64 model B: Add wifi ARM: dts: sun8i-v3s: Add I2C1 PB pins description ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi dt-bindings: vendors: add Elimo Engineering vendor prefix ARM: dts: sun8i: add FriendlyArm ZeroPi support ... Link: https://lore.kernel.org/r/551fdf4f-8a0b-4a22-ba49-b4f61520a9ab.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08KVM: arm64: Fix nVHE boot on VHE systemsMarc Zyngier
Conflict resolution gone astray results in the kernel not booting on VHE-capable HW when VHE support is disabled. Thankfully spotted by David. Reported-by: David Brazdil <dbrazdil@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-08arm64: dts: meson: add i2c3/rtc nodes and vrtc alias to GT-King/GT-King-ProChristian Hewitt
The GT-King and GT-King-Pro boxes have an RTC chip and power cell, so enable it. GTKING:~ # dmesg | grep rtc [ 5.237245] meson-vrtc ff8000a8.rtc: registered as rtc1 [ 5.261869] rtc-hym8563 0-0051: registered as rtc0 [ 5.265016] rtc-hym8563 0-0051: setting system clock to 2020-11-30T09:16:54 UTC (1606727814) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201201062135.18241-1-christianshewitt@gmail.com
2020-12-08arm64: defconfig: drop unused BACKLIGHT_GENERIC optionAndrey Zhizhikin
Commit 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") removed geenric_bl driver from the tree, together with corresponding config option. Remove BACKLIGHT_GENERIC config item from arm64 configuration. Fixes: 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20201201222922.3183-3-andrey.zhizhikin@leica-geosystems.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'v5.11-rockchip-defconfig64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig Some additional modules needed by Rockchip-based boards. * tag 'v5.11-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: Enable RTC_DRV_HYM8563 arm64: defconfig: Enable USB_SERIAL_CP210X arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY arm64: defconfig: Enable ROCKCHIP_LVDS Link: https://lore.kernel.org/r/2750818.e9J7NaK4W3@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'imx-defconfig-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.11: - A couple of patches that enable various i.MX audio drivers for i.MX8M. - Enable more drivers that are useful on Librem 5 hardware. * tag 'imx-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable more Librem 5 hardware arm64: defconfig: Enable ASRC and EASRC arm64: defconfig: Enable additional sound drivers on i.MX8M Mini Link: https://lore.kernel.org/r/20201202142717.9262-6-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'qcom-arm64-defconfig-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm defconfig updates for 5.11 This enables the Qualcomm PON and OSM L3 drivers. It then ensures that the QCOM_SCM and Command DB drivers are built-in, now that they have been made user selectable and tristate. * tag 'qcom-arm64-defconfig-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable Qualcomm PON driver arm64: defconfig: Enable QCOM_SCM as builtin arm64: defconfig: Enable Qualcomm OSM L3 driver arm64: defconfig: Enable Qualcomm Command DB driver Link: https://lore.kernel.org/r/20201130190124.345127-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'ti-k3-config-for-v5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/defconfig ARM64 defconfig changes for TI K3 platforms for v5.11 merge window: - GPIO and I2C for J721E SD card support to be functional * tag 'ti-k3-config-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Link: https://lore.kernel.org/r/20201130174850.ni4sdyz3qp67j3sz@upstart Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'arm-soc/for-5.11/defconfig-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/defconfig This pull request contains ARM64 defconfig changes for 5.11, please pull the following: - Florian enables the ARM SCMI protocol, and the common clock, HWMON and CPU frequency scaling drivers since those are used by ARCH_BRCMSTB platforms * tag 'arm-soc/for-5.11/defconfig-arm64' of https://github.com/Broadcom/stblinux: arm64: defconfig: Enable ARM SCMI protocol and drivers Link: https://lore.kernel.org/r/20201128163410.1691529-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'sunxi-config64-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig One patch to enable the Allwinner I2S controller on arm64's defconfig * tag 'sunxi-config64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: Enable Allwinner i2s driver Link: https://lore.kernel.org/r/5ddf5486-a20c-467a-bc67-d5e8fbc38856.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07arm64: dts: meson: g12b: w400: fix PHY deassert timing requirementsStefan Agner
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY egisters. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
2020-12-07arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirementsStefan Agner
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/12506964ca5d5f936579a280ad0a7e7f9a0a2d4c.1607363522.git.stefan@agner.ch
2020-12-07arm64: dts: meson: fix PHY deassert timing requirementsStefan Agner
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue seen on ODROID-C2 where the Ethernet link doesn't come up when using ip link set down/up: [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36) [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
2020-12-07arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirementsStefan Agner
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue where the Ethernet link doesn't come up when using ip link set down/up: [ 29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down [ 34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31) [ 34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma [ 34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/df3f5c4fc6e43c55429fd3662a636036a21eed49.1607363522.git.stefan@agner.ch
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-23 20:22:20 +0000