aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/pm.c
AgeCommit message (Collapse)Author
2018-09-25ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_wszhong jiang
of_find_device_by_node takes a reference to the struct device when it finds a match via get_device. but it fails to put_device in at91_pm_config_ws, for_each_matching_node_and_match will get and put the node properly, there is no need to call the of_put_node. Therefore, just call put_device instead of of_node_put in at91_pm_config_ws. Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode") Suggested-by: Claudiu Beznea <Claudiu.Beznea@microchip.com> Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27ARM: at91: pm: remove pm_bu initialization in at91_pm_backup_init()Claudiu Beznea
There is no need to initialize pm_bu since it is used only if backup mode is selected. In case backup mode initialization fails (which means pm_bu is invalid) the ULP0 mode will be selected. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-23Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Olof Johansson: "Business as usual -- the bulk of our changes are to devicetree files with new hardware support, new SoCs and platforms, and new board types. New SoCs/platforms: - Raspberry Pi Compute Module (CM1) and IO board - i.MX6SSL from NXP - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and PLC interfaces - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5 controllers, communication and PRU subsystem and lots of other interfaces (PCIe, USB3, etc). New boards and systems: - Several Atmel at91-based boards from Laird - Marvell Armada388-based Helios4 board from SolidRun - Samsung Aires-based phones (s5pv210) - Allwinner A64-based Pinebook laptop In addition to the above, there's the usual amount of new devices described on existing platforms, fixes and tweaks and new minor variants of boards/platforms" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits) arm64: dts: sdm845: Add tsens nodes arm64: dts: msm8996: thermal: Initialise via DT and add second controller arm64: dts: sprd: Add one suspend timer arm64: dts: sprd: Add SC27XX ADC device arm64: dts: sprd: Add SC27XX eFuse device arm64: dts: sprd: Add SC27XX vibrator device arm64: dts: sprd: Add SC27XX breathing light controller device arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: rockchip: add led support for Firefly-RK3399 arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399 arm64: dts: rockchip: add power button support for Firefly-RK3399 ARM: dts: aspeed: Add coprocessor interrupt controller arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator ...
2018-07-17ARM: at91: pm: configure wakeup sources for ULP1 modeClaudiu Beznea
Since for ULP1 PM mode of SAMA5D2 the wakeup sources are limited and well known add a method to check if these wakeup sources are defined by user (either via DT or filesystem). In case there are no wakeup sources defined for ULP1 the PM suspend will fail, otherwise these will be configured in fast startup registers of PMC. Since wakeup sources of ULP1 need also to be configured in SHDWC registers the code was a bit changed to map the SHDWC also in case ULP1 is requested by user (this was done in the initialization phase). In case the ULP1 initialization fails the ULP0 mode is used (this mode was also used in case backup mode initialization failed). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-17ARM: at91: pm: Add ULP1 mode supportWenyou Yang
In the ULP1 mode, in order to achieve the lowest power consumption with the system in retention mode and be able to resume on the wake up events, all the clocks are shut off, inclusive the embedded 12MHz RC oscillator, and the number of wake up sources is limited as well. When the wake up event is asserted, the embedded 12MHz RC oscillator restarts automatically. The ULP1 (Ultra Low-power mode 1) is introduced by SAMA5D2. The previous size of pm_suspend.o was 2148 bytes. With the addition of ULP1 mode the new size of pm_suspend.o raised at 2456 bytes. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> [claudiu.beznea@microchip.com: aligned with 4.18-rc1] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-17ARM: at91: pm: Use ULP0 naming instead of slow clockClaudiu Beznea
Switch to use ULP0 naming instead of slow clock naming for power modes, to be as closed as possible to datasheet. This commit does the necessary renaming and macro addition to be as close as possible to the namings from [1]. [1] https://lore.kernel.org/lkml/1470650705-31418-3-git-send-email-wenyou.yang@atmel.com Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-06-20ARM: at91: fix USB clock detection handlingAlexandre Belloni
Add more compatibles to be able to correct the USB clock detection. at91sam9261 and at91sam9263 have the same PMC_SCSR layout as at91sam9260. at91sam9rl doesn't have any USB clock. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-09-18ARM: at91: Replace uses of virt_to_phys with __pa_symbolAlexandre Belloni
The PM code wrongly uses virt_to_phys() instead of __pa_symbol() and was not updated by commit 64fc2a947a98 ("ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol") because it was not yet in tree. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-08-23ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platformsArnd Bergmann
My previous patch fixed a link error for all at91 platforms when CONFIG_ARM_CPU_SUSPEND was not set, however this caused another problem on a configuration that enabled CONFIG_ARCH_AT91 but none of the individual SoCs, and that also enabled CPU_ARM720 as the only CPU: warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE) arch/arm/kernel/sleep.o: In function `cpu_resume': (.text+0xf0): undefined reference to `cpu_arm720_suspend_size' arch/arm/kernel/suspend.o: In function `__cpu_suspend_save': suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend' This improves the hack some more by only selecting ARM_CPU_SUSPEND for the part that requires it, and changing pm.c to drop the contents of unused init functions so we no longer refer to cpu_resume on at91 platforms that don't need it. Fixes: cc7a938f5f30 ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND") Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-18Merge tag 'at91-ab-4.13-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc SoC for 4.13: - New suspend/resume mode for sama5d2 - Initial support for armv7m based SoCs * tag 'at91-ab-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: remove atmel_nand_data ARM: at91: fix at91_suspend_entering_slow_clock link error ARM: at91: debug: add samv7x support ARM: at91: add armv7m SoC detection ARM: at91: handle CONFIG_PM for armv7m configurations ARM: at91: Add armv7m support ARM: at91: Document armv7m compatibles ARM: at91: Documentation: add armv7m families ARM: at91: pm: fallback to slowclock when backup mode fails ARM: at91: pm: allow selecting standby and suspend modes ARM: at91: pm: Add sama5d2 backup mode Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-19ARM: remove duplicate 'const' annotations'Arnd Bergmann
gcc-7 warns about some declarations that are more 'const' than necessary: arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const ramc_ids[] __initconst = { arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const timer_of_match[] __initconst = { arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { The ones in arch/arm were apparently all introduced accidentally by one commit that correctly marked a lot of variables as __initconst. Fixes: 19c233b79d1a ("ARM: appropriate __init annotation for const data") Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-15ARM: at91: pm: fallback to slowclock when backup mode failsAlexandre Belloni
If the backup sram allocation fails, ensure we can suspend by falling back to the usual slow clock mode. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-05-15ARM: at91: pm: allow selecting standby and suspend modesAlexandre Belloni
While we can only select between "standby" and "mem" states for power management, the atmel platforms can actually support more modes. For both standby and mem, allow selecting which mode will be used using the atmel.pm_modes kernel parameter. By default, keep the current modes. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-05-15ARM: at91: pm: Add sama5d2 backup modeAlexandre Belloni
The sama5d2 has a mode were it is possible to cut power to the SoC while keeping the RAM in self refresh. Resuming from that mode needs support in the firmware/bootloader. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-03-31ARM: at91: pm: Remove at91_pm_set_standbyAlexandre Belloni
Merge at91_pm_set_standby() in at91_dt_ramc as this is the only callsite. That moves it to the init section. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Merge all at91sam9*_pm_initAlexandre Belloni
The PM initialization is now identical for all at91sam9. Merge the functions. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Tie the USB clock mask to the pmcAlexandre Belloni
The USB clocks mask (uhp_udp_mask) depends on the pmc. Tie it to the pmc id instead of the SoC. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Tie the memory controller type to the ramc idAlexandre Belloni
Instead of relying on the SoC type to select the memory controller type, use the device tree ids as they are parsed anyway. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.Alexandre Belloni
As already explained for pm_suspend.S, the DDRSDR controller fails to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Simplify at91rm9200_standbyAlexandre Belloni
Since 2008, AT91_MC_SDRAMC_LPR is set to 0 at kernel initialization. There is no use saving, changing and restoring it. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Use struct at91_pm_data in pm_suspend.SAlexandre Belloni
The number of register we can safely pass to at91_pm_suspend_in_sram is limited. Instead, pass the address to the at91_pm_data structure. The offsets are automatically generated to avoid hardcoding them. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Move global variables into at91_pm_dataAlexandre Belloni
Instead of having separate global variables to hold IP addresses, move them to struct at91_pm_data. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Move at91_ramc_read/write to pm.cAlexandre Belloni
Those macros are only used in pm.c, move them there so we can remove the test on __ASSEMBLY__. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31ARM: at91: pm: Cleanup headersAlexandre Belloni
Remove unnecessary header inclusions and reorder the remaining ones. Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-14ARM: at91: pm: cpu_idle: switch DDR to power-down modeNicolas Ferre
On some DDR controllers, compatible with the sama5d3 one, the sequence to enter/exit/re-enter the self-refresh mode adds more constrains than what is currently written in the at91_idle driver. An actual access to the DDR chip is needed between exit and re-enter of this mode which is somehow difficult to implement. This sequence can completely hang the SoC. It is particularly experienced on parts which embed a L2 cache if the code run between IDLE calls fits in it... Moreover, as the intention is to enter and exit pretty rapidly from IDLE, the power-down mode is a good candidate. So now we use power-down instead of self-refresh. As we can simplify the code for sama5d3 compatible DDR controllers, we instantiate a new sama5d3_ddr_standby() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.1+ Fixes: 017b5522d5e3 ("ARM: at91: Add new binding for sama5d3-ddramc") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11ARM: at91: pm: remove useless extern definitionAlexandre Belloni
at91_ramc_base is local to pm.c, remove its definition in pm.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-21ARM: at91: fix warnings in pm.cBen Dooks
Fix a pair of missing statics on un-exported functions and include <linux/platform_data/atmel.h> to provide the declaration of at91_suspend_entering_slow_clock() to fix the following sparse warnings: arch/arm/mach-at91/pm.c:127:5: warning: symbol 'at91_suspend_entering_slow_clock' was not declared. Should it be static? arch/arm/mach-at91/pm.c:358:6: warning: symbol 'at91rm9200_idle' was not declared. Should it be static? arch/arm/mach-at91/pm.c:367:6: warning: symbol 'at91sam9_idle' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17ARM: at91: pm: move idle functions to pm.cAlexandre Belloni
Avoid using code from clk/at91 for PM. This also has the bonus effect of setting arm_pm_idle for sama5 platforms. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-02-17ARM: at91: pm: find and remap the pmcAlexandre Belloni
To avoid relying on at91_pmc_read(), find the pmc node and remap it locally. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-02-17ARM: at91: pm: simply call at91_pm_initAlexandre Belloni
at91_pm_init() doesn't return a value, as is the case for its callers, simply call it instead of returning its non-existent return value. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-12-04ARM: at91: fix pinctrl driver selectionLudovic Desroches
Move the selection of the pinctrl driver to SoC family level since we have two pinctrl drivers. It is useless to select one which is not compatible with the SoC. [abelloni: fixed pm.c when only sama2d2 is selected] Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-04genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()Vladimir Zapolskiy
This change modifies gen_pool_get() and devm_gen_pool_create() client interfaces adding one more argument "name" of a gen_pool object. Due to implementation gen_pool_get() is capable to retrieve only one gen_pool associated with a device even if multiple gen_pools are created, fortunately right at the moment it is sufficient for the clients, hence provide NULL as a valid argument on both producer devm_gen_pool_create() and consumer gen_pool_get() sides. Because only one created gen_pool per device is addressable, explicitly add a restriction to devm_gen_pool_create() to create only one gen_pool per device, this implies two possible error codes returned by the function, account it on client side (only misc/sram). This completes client side changes related to genalloc updates. [akpm@linux-foundation.org: gen_pool_get() cleanup] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-28ARM: appropriate __init annotation for const dataNicolas Pitre
Init data marked const should be annotated with __initconst for correctness and not __initdata. In some cases the array gathering references to that data has to be marked const as well. This fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-06-30genalloc: rename dev_get_gen_pool() to gen_pool_get()Vladimir Zapolskiy
To be consistent with other genalloc interface namings, rename dev_get_gen_pool() to gen_pool_get(). The original omitted "dev_" prefix is removed, since it points to argument type of the function, and so it does not bring any useful information. [akpm@linux-foundation.org: update arch/arm/mach-socfpga/pm.c] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-20ARM: at91/pm: use the atmel-mc syscon definesAlexandre Belloni
Use the defines from atmel-mc.h instead of at91rm9200_sdramc.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-14Merge tag 'at91-cleanup4_bis' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/multiplatform Pull "Fourth batch of cleanup for 4.1" from Nicolas Ferre: - 1 issues revealed by the kbuild test robot fixed - move of some functions and macros into relevant files to be able to streamline the at91 specific header afterwards * tag 'at91-cleanup4_bis' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/pm: move AT91_MEMCTRL_* to pm.h ARM: at91/pm: move the standby functions to pm.c ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected
2015-04-05ARM: at91/pm: move the standby functions to pm.cAlexandre Belloni
The standby functions are now only used in pm.c, move them there. Also, they are not inlined as a pointer to those functions is passed to the cpuidle driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19ARM: at91: remove hardware.hAlexandre Belloni
hardware.h is now mostyl unused, move the remaining declarations to pm.c and remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19ARM: at91: remove useless mach/cpu.hAlexandre Belloni
mach/cpu.h is not used anymore, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: flush data cache and clean, invalidate and disable the L2 cacheWenyou Yang
Flush data cache, and clean, invalidate and disable the L2 cache before going to suspend. Restore the L2 cache configuration and re-enable the L2 cache after waking up. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: remove unused void (*at91_pm_standby)(void)Wenyou Yang
Because the standby mode use the same sram function as the suspend to memory mode, void (*at91_pm_standby)(void) doesn't need, remove it. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: rename function name: at91_slow_clock() --> ↵Wenyou Yang
at91_pm_suspend_sram_fn() As the file name is renamed, rename the function name at91_slow_clock() --> at91_pm_suspend_sram_fn(), rename the function handler's name at the same time. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: little update of the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: standby mode uses same sram function as suspend to memory modeWenyou Yang
To simply the PM code, the suspend to standby mode uses same sram function as the suspend to memory mode, running in the internal SRAM, instead of the respective code for each mode. For the suspend to standby mode, the master clock doesn't switch to the slow clock, and PLLA and the main oscillator doesn't turn off as well. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: move the copying the sram function to the sram initialization ↵Wenyou Yang
phase To decrease the suspend time, move copying the sram function to the sram initialization phase, instead of every time go to suspend. In the meanwhile, substitute fncpy() for memcpy(). If there is no sram allocated for PM, the PM is not supported. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: remove CONFIG_AT91_SLOW_CLOCK config optionWenyou Yang
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config is unnecessary for the suspend to memory mode. For this mode the master clock should always switch to the slow clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12ARM: at91: pm: change at91_pm_set_standby() to staticWenyou Yang
Since at91_pm_set_standby() will not be used out of the pm.c file, change its attribute from extern to static, remove its declaration as well. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91: pm: fix SRAM allocationAlexandre Belloni
On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-19ARM: make of_device_ids constUwe Kleine-König
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs in arch/arm as const, too. While at it also add some __initconst annotations. Acked-by: Jason Cooper <jason@lakedameon.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-02ARM: at91/trivial: unify functions and machine namesNicolas Ferre
Remove the string "(Device Tree)" after the machine name because all AT91 machines use the DT nowadays. Also change some function names to unify following the convention: - at91sam9xxx aren't named sam9, 9xxx but with the full name - sama5 are the ones that don't have the at91 prefix anymore. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-02ARM: at91: remove at91_dt_initialize and machine init_early()Alexandre Belloni
Move the ramc initialization to pm.c as it is the only user left. This allows us to get rid of at91_dt_initialize() that was the only one called by the init_early() function pointer of struct machine_desc. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: adapt patch to newer series] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-17 16:08:34 +0000