aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-28arm: kgdb: fiq supportmerge/fiqDaniel Thompson
On SMP systems it is necessary to use FIQ to bring other CPUs to a halt when the system stops. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-28kgdb: Infrastructure to request NMI handlingDaniel Thompson
This addes code to the kgdb_nmi code to install an explicit NMI handler using the polling infrastructure. Whilst doing this we simplify even further the relationships between kgdb core, kgdboc and kgdb_nmi. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-28serial: imx: Implement poll_nmi_wrap/unwrapDaniel Thompson
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27tty: poll_nmi_wrap/unwrapDaniel Thompson
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27arm: smp: Replace IPI_CPU_BACKTRACE with IPI_NMIDaniel Thompson
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27arm: traps: Remove arch_filter_nmi_handlerDaniel Thompson
This got seriously panned during code review and is currently in my way. For now lets just nuke it... we'll squash this patch into the perf/NMI series shortly. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27irq: gic: Add nofiq optionDaniel Thompson
Provide a nofiq option to allow sub-systems for which the use of FIQ is options (like perf) to be switched between IRQ and FIQ mode. This is great for live demos and can also be used to test some of the error paths in the irq subsystem. Note: However useful this patch is it is a hack and will not be upstreamed. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27arm: perf: Use FIQ to handle PMU events.Daniel Thompson
Using FIQ (if it is available) gives perf a better insight into the system by allowing code run with interrupts disabled to be profiled. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27arm: perf: Make v7 support FIQ-safeDaniel Thompson
armv7pmu_disable_event() is called during irq handling. If irq handling switches over to fiq then the spin locks in this function risk deadlock. Both armv7_pmnc_disable_counter() and armv7_pmnc_disable_intens() are unconditional co-processor writes. I haven't yet come up with an schedule where other users of pmu_lock would break if interleaved with these calls so I have simply removed them. The other change required us to avoid calling irq_work_run() when run from a FIQ handler. The pended work will either be dispatched by the irq work IPI or by a timer handler. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27irq: gic: Add support for NMI routingDaniel Thompson
This patch provides an implementation of irq_set_nmi_routing by allowing SPIs to be switched between group 1 (IRQ) and group 0 (FIQ). It also repaces the interface used between the default FIQ handler and the GIC. These extensions are required in order to allow SPIs to be acknowledged and completed. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27irq: Allow interrupts to routed to NMI (or similar)Daniel Thompson
Some combinations of architectures and interrupt controllers make it possible for abitrary interrupt signals to be selectively made immune to masking by local_irq_disable(). For example, on ARM platforms, many interrupt controllers allow interrupts to be routed to FIQ rather than IRQ. These features could be exploited to implement debug and tracing features that can be implemented using NMI on x86 platforms (perf, hard lockup, kgdb). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27arm: irq: Add a __nmi_count statDaniel Thompson
Extends the irq statistics for ARM, making it possible to quickly observe how many times the default FIQ handler has executed. In /proc/interrupts we use the NMI terminology (rather than FIQ) because the statistic is only likely to be updated when we run the default FIQ handler (handle_fiq_as_nmi). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27ARM: Minimal support for the hard lockup dectectorDaniel Thompson
Currently there is no support for the hard lockup detector (a.k.a. the NMI watchdog) for ARM. This patch provides the absolute bare minimum needed to allow the watchdog to operate and does not tackle a few complications. In particular boot ordering issues prevent the watchdog from starting without assistance from userspace (the watchdog is initialized before the PMU). Likewise there is no logic to automatically disable the watchdog on systems with no support for FIQ (the watchdog is safe to run from IRQ but it becomes ineffective). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27ARM: Fix on-demand backtrace triggered by IRQDaniel Thompson
Currently if arch_trigger_all_cpu_backtrace() is called with interrupts disabled and on a platform the delivers IPI_CPU_BACKTRACE using regular IRQ requests the system will wedge for ten seconds waiting for the current CPU to react to a masked interrupt. This patch resolves this issue by calling directly into the backtrace dump code instead of generating an IPI. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <linux@arm.linux.org.uk>
2015-01-27ARM: Add support for on-demand backtrace of other CPUsDaniel Thompson
Duplicate the x86 code to trigger a backtrace using an NMI and hook it up to IPI on ARM. Where it is possible for the hardware to do so the IPI will be delivered at FIQ level. Also provided are a few small items of plumbing to hook up the new code. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org>
2015-01-27x86/nmi: Use common printk functionsDaniel Thompson
Much of the code sitting in arch/x86/kernel/apic/hw_nmi.c to support safe all-cpu backtracing from NMI has been copied to printk.c to make it accessible to other architectures. Port the x86 NMI backtrace to the generic code. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org
2015-01-27printk: Simple implementation for NMI backtracingDaniel Thompson
Currently there is a quite a pile of code sitting in arch/x86/kernel/apic/hw_nmi.c to support safe all-cpu backtracing from NMI. The code is inaccessible to backtrace implementations for other architectures, which is a shame because they would probably like to be safe too. Copy this code into printk. We'll port the x86 NMI backtrace to it in a later patch. Incidentally, technically I think it might be safe to call prepare_nmi_printk() from NMI, providing care were taken to honour the return code. complete_nmi_printk() cannot be called from NMI but could be scheduled using irq_work_queue(). However honouring the return code means sometimes it is impossible to get the message out so I'd say using this code in such a way should probably attract sympathy and/or derision rather than admiration. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org>
2015-01-27sched_clock: Avoid deadlock during read from NMIDaniel Thompson
Currently it is possible for an NMI (or FIQ on ARM) to come in and read sched_clock() whilst update_sched_clock() has locked the seqcount for writing. This results in the NMI handler locking up when it calls raw_read_seqcount_begin(). This patch fixes that problem by providing banked clock data in a similar manner to Thomas Gleixner's 4396e058c52e("timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC"). Changing the mode of operation of the seqcount away from the traditional LSB-means-interrupted-write to a banked approach also revealed a good deal of "fake" write locking within sched_clock_register(). This is likely to be a latent issue because sched_clock_register() is typically called before we enable interrupts. Nevertheless the issue has been eliminated by increasing the scope of the read locking performed by sched_clock(). Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: John Stultz <john.stultz@linaro.org>
2015-01-27irqchip: gic: Introduce plumbing for IPI FIQDaniel Thompson
Currently it is not possible to exploit FIQ for systems with a GIC, even if the systems are otherwise capable of it. This patch makes it possible for IPIs to be delivered using FIQ. To do so it modifies the register state so that normal interrupts are placed in group 1 and specific IPIs are placed into group 0. It also configures the controller to raise group 0 interrupts using the FIQ signal. It provides a means for architecture code to define which IPIs shall use FIQ and to acknowledge any IPIs that are raised. All GIC hardware except GICv1-without-TrustZone support provides a means to group exceptions into group 0 and group 1 but the hardware functionality is unavailable to the kernel when a secure monitor is present because access to the grouping registers are prohibited outside "secure world". However when grouping is not available (or in the case of early GICv1 implementations is very hard to configure) the code to change groups does not deploy and all IPIs will be raised via IRQ. It has been tested and shown working on two systems capable of supporting grouping (Freescale i.MX6 and STiH416). It has also been tested for boot regressions on two systems that do not support grouping (vexpress-a9 and Qualcomm Snapdragon 600). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Jon Medhurst <tixy@linaro.org>
2015-01-27irqchip: gic: Make gic_raise_softirq FIQ-safeDaniel Thompson
It is currently possible for FIQ handlers to re-enter gic_raise_softirq() and lock up. gic_raise_softirq() lock(x); -~-> FIQ handle_fiq() gic_raise_softirq() lock(x); <-- Lockup arch/arm/ uses IPIs to implement arch_irq_work_raise(), thus this issue renders it difficult for FIQ handlers to safely defer work to less restrictive calling contexts. This patch fixes the problem by converting the cpu_map_migration_lock into a rwlock making it safe to re-enter the function. Note that having made it safe to re-enter gic_raise_softirq() we no longer need to mask interrupts during gic_raise_softirq() because the b.L migration is always performed from task context. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Marc Zyngier <marc.zyngier@arm.com>
2015-01-27irqchip: gic: Optimize locking in gic_raise_softirqDaniel Thompson
Currently gic_raise_softirq() is locked using upon irq_controller_lock. This lock is primarily used to make register read-modify-write sequences atomic but gic_raise_softirq() uses it instead to ensure that the big.LITTLE migration logic can figure out when it is safe to migrate interrupts between physical cores. This is sub-optimal in closely related ways: 1. No locking at all is required on systems where the b.L switcher is not configured. 2. Finer grain locking can be used on systems where the b.L switcher is present. This patch resolves both of the above by introducing a separate finer grain lock and providing conditionally compiled inlines to lock/unlock it. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Marc Zyngier <marc.zyngier@arm.com>
2015-01-27misc: Add a lockup driver to get the CPUs wedgedDaniel Thompson
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27kdb: Const qualifier for kdb_getstr's prompt argumentDaniel Thompson
All current callers of kdb_getstr() can pass constant pointers via the prompt argument. This patch adds a const qualification to make explicit the fact that this is safe. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27kdb: Provide forward search at more promptDaniel Thompson
Currently kdb allows the output of comamnds to be filtered using the | grep feature. This is useful but does not permit the output emitted shortly after a string match to be examined without wading through the entire unfiltered output of the command. Such a feature is particularly useful to navigate function traces because these traces often have a useful trigger string *before* the point of interest. This patch reuses the existing filtering logic to introduce a simple forward search to kdb that can be triggered from the more prompt. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27kdb: Fix a prompt management bug when using | grepDaniel Thompson
Currently when the "| grep" feature is used to filter the output of a command then the prompt is not displayed for the subsequent command. Likewise any characters typed by the user are also not echoed to the display. This rather disconcerting problem eventually corrects itself when the user presses Enter and the kdb_grepping_flag is cleared as kdb_parse() tries to make sense of whatever they typed. This patch resolves the problem by moving the clearing of this flag from the middle of command processing to the beginning. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-27kdb: Remove stack dump when entering kgdb due to NMIDaniel Thompson
Issuing a stack dump feels ergonomically wrong when entering due to NMI. Entering due to NMI is normally a reaction to a user request, either the NMI button on a server or a "magic knock" on a UART. Therefore the backtrace behaviour on entry due to NMI should be like SysRq-g (no stack dump) rather than like oops. Note also that the stack dump does not offer any information that cannot be trivial retrieved using the 'bt' command. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com>
2015-01-27kdb: Avoid printing KERN_ levels to consolesDaniel Thompson
Currently when kdb traps printk messages then the raw log level prefix (consisting of '\001' followed by a numeral) does not get stripped off before the message is issued to the various I/O handlers supported by kdb. This causes annoying visual noise as well as causing problems grepping for ^. It is also a change of behaviour compared to normal usage of printk() usage. For example <SysRq>-h ends up with different output to that of kdb's "sr h". This patch addresses the problem by stripping log levels from messages before they are issued to the I/O handlers. printk() which can also act as an i/o handler in some cases is special cased; if the caller provided a log level then the prefix will be preserved when sent to printk(). The addition of non-printable characters to the output of kdb commands is a regression, albeit and extremely elderly one, introduced by commit 04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"). Note also that this patch does *not* restore the original behaviour from v3.5. Instead it makes printk() from within a kdb command display the message without any prefix (i.e. like printk() normally does). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: stable@vger.kernel.org
2015-01-27fixup: ATAG MEM fixup loader for Qualcomm devicesBjorn Andersson
The fixup.bin will when prepended to zImage fixup the atag mem such that the kernel will be happy. Without this a panic will occur upon freeing bootmem. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-01-27serial: Emulate break using control charactersDaniel Thompson
Currently the magic SysRq functions are accessed by sending a break. Unfortunately some networked serial proxies makes is difficult to send a break meaning SysRq functions cannot be reached. We avoid this problem by allowing the (fairly unlikely) sequence of ^B^R^K characters to emulate a real break. This approach is very nearly as robust as normal sysrq/break handling because all trigger recognition happens during interrupt handling however to emulate a break we must enter the ISR four times (instead of twice) and manage an extra byte of state. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2015-01-25Linux 3.19-rc6Linus Torvalds
2015-01-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Hopefully the last round of fixes for 3.19 - regression fix for the LDT changes - regression fix for XEN interrupt handling caused by the APIC changes - regression fixes for the PAT changes - last minute fixes for new the MPX support - regression fix for 32bit UP - fix for a long standing relocation issue on 64bit tagged for stable - functional fix for the Hyper-V clocksource tagged for stable - downgrade of a pr_err which tends to confuse users Looks a bit on the large side, but almost half of it are valuable comments" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" x86, tls, ldt: Stop checking lm in LDT_empty x86, mpx: Strictly enforce empty prctl() args x86, mpx: Fix potential performance issue on unmaps x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels x86, hyperv: Mark the Hyper-V clocksource as being continuous x86: Don't rely on VMWare emulating PAT MSR correctly x86, irq: Properly tag virtualization entry in /proc/interrupts x86, boot: Skip relocs when load address unchanged x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable() x86/xen: Treat SCI interrupt as normal GSI interrupt
2015-01-25Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "From the irqchip departement you get: - regression fix for omap-intc - regression fix for atmel-aic-common - functional correctness fix for hip04 - type mismatch fix for gic-v3-its - proper error pointer check for mtd-sysirq Mostly one and two liners except for the omap regression fix which is slightly larger than desired" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type irqchip: omap-intc: Fix legacy DMA regression irqchip: gic-v3-its: Fix use of max with decimal constant irqchip: hip04: Initialize hip04_cpu_map to 0xffff irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
2015-01-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes: - regression fix for exynos_mct clocksource - trivial build fix for kona clocksource - functional one liner fix for the sh_tmu clocksource - two validation fixes to prevent (root only) data corruption in the kernel via settimeofday and adjtimex. Tagged for stable" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: adjtimex: Validate the ADJ_FREQUENCY values time: settimeofday: Validate the values of tv from user clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast clocksource: kona: fix __iomem annotation clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
2015-01-25Merge tag 'armsoc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A week's worth of fixes for various ARM platforms. Diff wise, the largest fix is for OMAP to deal with how GIC now registers interrupts (irq_domain_add_legacy() -> irq_domain_add_linear() changes). Besides this, a few more renesas platforms needed the GIC instatiation done for legacy boards. There's also a fix that disables coherency of mvebu due to issues, and a few other smaller fixes" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add baud rate to Juno stdout-path ARM: dts: imx25: Fix PWM "per" clocks bus: mvebu-mbus: fix support of MBus window 13 Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes ARM: mvebu: completely disable hardware I/O coherency ARM: OMAP: Work around hardcoded interrupts ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
2015-01-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes - deadlock in CIFS and build breakage in cris serial driver (resurfaced f_dentry in there)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Convert file->f_dentry->d_inode to file_inode() fix deadlock in cifs_ioctl_clone()
2015-01-25Merge tag 'dm-3.19-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Two stable fixes for dm-cache and one 3.19 DM core fix: - fix potential for dm-cache metadata corruption via stale metadata buffers being used when switching an inactive cache table to active; this could occur due to each table having it's own bufio client rather than sharing the client between tables. - fix dm-cache target to properly account for discard IO while suspending otherwise IO quiescing could complete prematurely. - fix DM core's handling of multiple internal suspends by maintaining an 'internal_suspend_count' and only resuming the device when this count drops to zero" * tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix handling of multiple internal suspends dm cache: fix problematic dual use of a single migration count variable dm cache: share cache-metadata object across inactive and active DM tables
2015-01-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull two block layer fixes from Jens Axboe: "Two small patches that should make it into 3.19: - a fixup from me for NVMe, making the cq_vector a signed variable. Otherwise our -1 comparison fails, and commit 2b25d981790b doesn't do what it was supposed to. - a fixup for the hotplug handling for blk-mq from Ming Lei, using the proper kobject referencing to ensure we release resources at the right time" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: fix hctx/ctx kobject use-after-free NVMe: cq_vector should be signed
2015-01-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi pULL SCSI fixes from James Bottomley: "This consists of four real fixes and three MAINTAINER updates. Three of the fixes are obvious (the DIX and atomic allocation are bug on and warn on fixes and the other is just trivial) and the ipr one is a bit more involved but is required because without it, the card double completes aborted commands and causes a kernel oops" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ibmvscsi driver maintainer change MAINTAINERS: ibmvfc driver maintainer change MAINTAINERS: Remove self as isci maintainer scsi_debug: test always evaluates to false, || should be used instead scsi: Avoid crashing if device uses DIX but adapter does not support it scsi_debug: use atomic allocation in resp_rsup_opcodes ipr: wait for aborted command responses
2015-01-24Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This will fix reboot issues with the imx2_wdt driver and it also drops some forgotten owner assignments from platform_drivers" * git://www.linux-watchdog.org/linux-watchdog: watchdog: drop owner assignment from platform_drivers watchdog: imx2_wdt: Disable power down counter on boot watchdog: imx2_wdt: Improve power management support.
2015-01-24Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon update from Jean Delvare: "This contains a single thing: a new driver for the temperature sensor embedded in the Intel 5500/5520/X58 chipsets. Sorry for the late request, it's been so long since I last sent a pull request and I've been so busy with other tasks meanwhile that I simply forgot about these patches. But given that this is a new driver, it can't introduce any regression so I thought it could still be OK. This has been in linux-next for months now" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro hwmon: (i5500_temp) Convert to module_pci_driver hwmon: (i5500_temp) Don't bind to disabled sensors hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
2015-01-24Merge tag 'media/v3.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix some race conditions caused by a regression on videobuf2 - fix a interrupt release bug on cx23885 - fix support for Mygica T230 and HVR4400 - fix compilation breakage when USB is not selected on tlg2300 - fix capabilities report on ompa3isp, soc-camera, rcar_vin and pvrusb2 * tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Correctly set QUERYCAP capabilities [media] cx23885: fix free interrupt bug [media] pvrusb2: fix missing device_caps in querycap [media] vb2: fix vb2_thread_stop race conditions [media] rcar_vin: Update device_caps and capabilities in querycap [media] soc-camera: fix device capabilities in multiple camera host drivers [media] Fix Mygica T230 support [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry [media] tlg2300: Fix media dependencies
2015-01-24dm: fix handling of multiple internal suspendsMikulas Patocka
Commit ffcc393641 ("dm: enhance internal suspend and resume interface") attempted to handle multiple internal suspends on the same device, but it did that incorrectly. When these functions are called in this order on the same device the device is no longer suspended, but it should be: dm_internal_suspend_noflush dm_internal_suspend_noflush dm_internal_resume Fix this bug by maintaining an 'internal_suspend_count' and resuming the device when this count drops to zero. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-01-24hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macroAxel Lin
Use ATTRIBUTE_GROUPS macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-01-24hwmon: (i5500_temp) Convert to module_pci_driverAxel Lin
Use module_pci_driver to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-01-24hwmon: (i5500_temp) Don't bind to disabled sensorsJean Delvare
On many motherboards, for an unknown reason, the thermal sensor seems to be disabled and will return a constant temperature value of 36.5 degrees Celsius. Don't bind to the device in that case, so that we don't report this bogus value to userspace. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groupsJean Delvare
Use devm_hwmon_device_register_with_groups() to simplify the code a bit. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsetsJean Delvare
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor. This new driver supports it. Note that on many boards the sensor seems to be disabled and reports the minimum value (36.5 degrees Celsius) all the time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have a few fixes in my for-linus branch. Qu Wenruo's batch fix a regression between some our merge window pull and the inode_cache feature. The rest are smaller bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock. btrfs: Fix the bug that fs_info->pending_changes is never cleared. btrfs: fix state->private cast on 32 bit machines Btrfs: fix race deleting block group from space_info->ro_bgs list Btrfs: fix incorrect freeing in scrub_stripe btrfs: sync ioctl, handle errors after transaction start
2015-01-24Merge tag 'platform-drivers-x86-v3.19-2' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull platform driver fix from Darren Hart: "Revert keyboard backlight sysfs support and documentation. The support for the dell-laptop keyboard backlight was flawed and the fix: https://lkml.org/lkml/2015/1/14/539 was more invasive that I felt comfortable sending at RC5. This series reverts the support for the dell-laptop keyboard backlight as well as the documentation for the newly created sysfs attributes. We'll get this implemented correctly for 3.20" * tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface"
2015-01-24Merge tag 'pci-v3.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for: - a resource management problem that causes a Radeon "Fatal error during GPU init" on machines where the BIOS programmed an invalid Root Port window. This was a regression in v3.16. - an Atheros AR93xx device that doesn't handle PCI bus resets correctly. This was a regression in v3.14. - an out-of-date email address" * tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Richard Zhu's email address sparc/PCI: Clip bridge windows to fit in upstream windows powerpc/PCI: Clip bridge windows to fit in upstream windows parisc/PCI: Clip bridge windows to fit in upstream windows mn10300/PCI: Clip bridge windows to fit in upstream windows microblaze/PCI: Clip bridge windows to fit in upstream windows ia64/PCI: Clip bridge windows to fit in upstream windows frv/PCI: Clip bridge windows to fit in upstream windows alpha/PCI: Clip bridge windows to fit in upstream windows x86/PCI: Clip bridge windows to fit in upstream windows PCI: Add pci_claim_bridge_resource() to clip window if necessary PCI: Add pci_bus_clip_resource() to clip to fit upstream window PCI: Pass bridge device, not bus, when updating bridge windows PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset