aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-01ARM: STi: Add STiH416 ethernet support.features/b2020-eth1Srinivas Kandagatla
This patch adds support to STiH416 SOC, which has two ethernet snps,dwmac controllers version 3.710. With this patch B2000 and B2020 boards can boot with ethernet in MII and RGMII modes. Tested on both B2020 and B2000. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-04-01ARM: STi: STiH415: Add ethernet support.Srinivas Kandagatla
This patch adds support to STiH415 SOC, which has two ethernet snps,dwmac controllers version 3.610. With this patch B2000 and B2020 boards can boot with ethernet in MII and RGMII modes. Tested on both B2020 and B2000. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-04-01ARM: STi: Add reset controller support to mach-sti KconfigStephen Gallimore
This patch selects reset controller support for ARCH_STI and selects the reset controllers for STiH415 and STiH416 SoCs. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-04-01drivers: reset: stih416: add softreset controllerSrinivas Kandagatla
This patch adds softreset controller for STiH416 SOC, soft reset controller is based on system configuration registers which are mapped via regmap. This reset controller does not have any feedback or acknowledgement. With this patch a new device "st,stih416-softreset" is registered with system configuration registers based reset controller that controls the softreset state of the hardware such as Ethernet, IRB. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-04-01drivers: reset: stih415: add softreset controllerSrinivas Kandagatla
This patch adds softreset controller for STiH415 SOC, soft reset controller is based on system configuration registers which are mapped via regmap. This reset controller does not have any feedback or acknowledgement. With this patch a new device "st,stih415-softreset" is registered with system configuration registers based reset controller that controls the softreset state of the hardware such as Ethernet, IRB. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-04-01drivers: reset: Reset controller driver for STiH416Stephen Gallimore
This patch adds a reset controller platform driver for the STiH416 SoC. This initial version provides a compatible driver for the "st,stih416-powerdown" device, which registers a system configuration register based reset controller that controls the powerdown state of hardware such as the on-chip USB host controllers. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com>
2014-04-01drivers: reset: Reset controller driver for STiH415Stephen Gallimore
This patch adds a reset controller platform driver for the STiH415 SoC. This initial version provides a compatible driver for the "st,stih415-powerdown" device, which registers a system configuration register based reset controller that controls the powerdown state of hardware such as the on-chip USB host controllers. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com>
2014-04-01drivers: reset: STi SoC system configuration reset controller supportStephen Gallimore
This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device. System configuration registers are accessed through the regmap framework and the mfd/syscon driver. The implementation optionally supports waiting for the reset action to be acknowledged in a separate status register and supports both active high and active low reset lines. These properties are common across all the reset channels in a specific reset controller instance, hence all channels in a paritcular controller are expected to behave in the same way. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com>
2014-03-31Merge branch 'for-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "A lot of activities on libata side this time. - A lot of changes around ahci. Various embedded platforms are implementing ahci controllers. Some were built atop ahci_platform, others were doing their own things. Hans made some structural changes to libahci and librarized ahci_platform so that ahci platform drivers can share more common code. A couple platform drivers are added on top of that and several are added to replace older drivers which were doing their own things (older ones are scheduled to be removed). - Dan finishes the patchset to make libata PM operations asynchronous. Combined with one patch being routed through scsi, this should speed resume measurably. - Various fixes and cleanups from Bartlomiej and others" * 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits) ata: fix Marvell SATA driver dependencies ata: fix ARASAN CompactFlash PATA driver dependencies ata: remove superfluous casts ata: sata_highbank: remove superfluous cast ata: fix Calxeda Highbank SATA driver dependencies ata: fix R-Car SATA driver dependencies ARM: davinci: da850: update SATA AHCI support ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller ata: move library code from ahci_platform.c to libahci_platform.c ata: ahci_platform: fix ahci_platform_data->suspend method handling libata: remove unused ata_sas_port_async_resume() stub libata.h: add stub for ata_sas_port_resume libata: async resume libata, libsas: kill pm_result and related cleanup ata: Fix compiler warning with APM X-Gene host controller driver arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries ata: Add APM X-Gene SoC AHCI SATA host controller driver Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries ata: ahci_sunxi: fix code formatting ...
2014-03-31Merge branch 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "PREPARE_[DELAYED_]WORK() were used to change the work function of work items without fully reinitializing it; however, this makes workqueue consider the work item as a different one from before and allows the work item to start executing before the previous instance is finished which can lead to extremely subtle issues which are painful to debug. The interface has never been popular. This pull request contains patches to remove existing usages and kill the interface. As one of the changes was routed during the last devel cycle and another depended on a pending change in nvme, for-3.15 contains a couple merge commits. In addition, interfaces which were deprecated quite a while ago - __cancel_delayed_work() and WQ_NON_REENTRANT - are removed too" * 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: remove deprecated WQ_NON_REENTRANT workqueue: Spelling s/instensive/intensive/ workqueue: remove PREPARE_[DELAYED_]WORK() staging/fwserial: don't use PREPARE_WORK afs: don't use PREPARE_WORK nvme: don't use PREPARE_WORK usb: don't use PREPARE_DELAYED_WORK floppy: don't use PREPARE_[DELAYED_]WORK ps3-vuart: don't use PREPARE_WORK wireless/rt2x00: don't use PREPARE_WORK in rt2800usb.c workqueue: Remove deprecated __cancel_delayed_work()
2014-03-31Merge branch 'for-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu changes from Tejun Heo: "The percpu allocation is now popular enough for the extremely naive range allocator to cause scalability issues. The existing allocator linearly scanned the allocation map on both alloc and free without making use of hint or anything. Al reimplemented the range allocator so that it can use binary search instead of linear scan during free and alloc path uses simple hinting to avoid scanning in common cases. Combined, the new allocator resolves the scalability issue percpu allocator was showing during container benchmark workload" * 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: renew the max_contig if we merge the head and previous block percpu: allocation size should be even percpu: speed alloc_pcpu_area() up percpu: store offsets instead of lengths in ->map[] perpcu: fold pcpu_split_block() into the only caller
2014-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull ARM64 updates from Catalin Marinas: - KGDB support for arm64 - PCI I/O space extended to 16M (in preparation of PCIe support patches) - Dropping ZONE_DMA32 in favour of ZONE_DMA (we only need one for the time being), together with swiotlb late initialisation to correctly setup the bounce buffer - DMA API cache maintenance support (not all ARMv8 platforms have hardware cache coherency) - Crypto extensions advertising via ELF_HWCAP2 for compat user space - Perf support for dwarf unwinding in compat mode - asm/tlb.h converted to the generic mmu_gather code - asm-generic rwsem implementation - Code clean-up * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits) arm64: Remove pgprot_dmacoherent() arm64: Support DMA_ATTR_WRITE_COMBINE arm64: Implement custom mmap functions for dma mapping arm64: Fix __range_ok macro arm64: Fix duplicated Kconfig entries arm64: mm: Route pmd thp functions through pte equivalents arm64: rwsem: use asm-generic rwsem implementation asm-generic: rwsem: de-PPCify rwsem.h arm64: enable generic CPU feature modalias matching for this architecture arm64: smp: make local symbol static arm64: debug: make local symbols static ARM64: perf: support dwarf unwinding in compat mode ARM64: perf: add support for frame pointer unwinding in compat mode ARM64: perf: add support for perf registers API arm64: Add boot time configuration of Intermediate Physical Address size arm64: Do not synchronise I and D caches for special ptes arm64: Make DMA coherent and strongly ordered mappings not executable arm64: barriers: add dmb barrier arm64: topology: Implement basic CPU topology support arm64: advertise ARMv8 extensions to 32-bit compat ELF binaries ...
2014-03-31Merge tag 'please-pull-misc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "Miscellaneous ia64 fixes for 3.15 merge window" * tag 'please-pull-misc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Keep format strings from leaking into printk Fix warning in make defconfig [IA64] sba_iommu: fix section mismatch To: linux-kernel@vger.kernel.org
2014-03-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Update defconfigs for v3.14-rc1 [SCSI] atari_scsi: Fix sleep_on race m68k: head.S - Remove bogus L prefix in comment m68k: Remove dead code m68k: Remove CONSOLE_PENGUIN macro, adopt CONFIG_LOGO
2014-03-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "There are two memory management related changes, the CMMA support for KVM to avoid swap-in of freed pages and the split page table lock for the PMD level. These two come with common code changes in mm/. A fix for the long standing theoretical TLB flush problem, this one comes with a common code change in kernel/sched/. Another set of changes is Heikos uaccess work, included is the initial set of patches with more to come. And fixes and cleanups as usual" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (36 commits) s390/con3270: optionally disable auto update s390/mm: remove unecessary parameter from pgste_ipte_notify s390/mm: remove unnecessary parameter from gmap_do_ipte_notify s390/mm: fixing comment so that parameter name match s390/smp: limit number of cpus in possible cpu mask hypfs: Add clarification for "weight_min" attribute s390: update defconfigs s390/ptrace: add support for PTRACE_SINGLEBLOCK s390/perf: make print_debug_cf() static s390/topology: Remove call to update_cpu_masks() s390/compat: remove compat exec domain s390: select CONFIG_TTY for use of tty in unconditional keyboard driver s390/appldata_os: fix cpu array size calculation s390/checksum: remove memset() within csum_partial_copy_from_user() s390/uaccess: remove copy_from_user_real() s390/sclp_early: Return correct HSA block count also for zero s390: add some drivers/subsystems to the MAINTAINERS file s390: improve debug feature usage s390/airq: add support for irq ranges s390/mm: enable split page table lock for PMD level ...
2014-03-31Merge branch 'compat' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 compat wrapper rework from Heiko Carstens: "S390 compat system call wrapper simplification work. The intention of this work is to get rid of all hand written assembly compat system call wrappers on s390, which perform proper sign or zero extension, or pointer conversion of compat system call parameters. Instead all of this should be done with C code eg by using Al's COMPAT_SYSCALL_DEFINEx() macro. Therefore all common code and s390 specific compat system calls have been converted to the COMPAT_SYSCALL_DEFINEx() macro. In order to generate correct code all compat system calls may only have eg compat_ulong_t parameters, but no unsigned long parameters. Those patches which change parameter types from unsigned long to compat_ulong_t parameters are separate in this series, but shouldn't cause any harm. The only compat system calls which intentionally have 64 bit parameters (preadv64 and pwritev64) in support of the x86/32 ABI haven't been changed, but are now only available if an architecture defines __ARCH_WANT_COMPAT_SYS_PREADV64/PWRITEV64. System calls which do not have a compat variant but still need proper zero extension on s390, like eg "long sys_brk(unsigned long brk)" will get a proper wrapper function with the new s390 specific COMPAT_SYSCALL_WRAPx() macro: COMPAT_SYSCALL_WRAP1(brk, unsigned long, brk); which generates the following code (simplified): asmlinkage long sys_brk(unsigned long brk); asmlinkage long compat_sys_brk(long brk) { return sys_brk((u32)brk); } Given that the C file which contains all the COMPAT_SYSCALL_WRAP lines includes both linux/syscall.h and linux/compat.h, it will generate build errors, if the declaration of sys_brk() doesn't match, or if there exists a non-matching compat_sys_brk() declaration. In addition this will intentionally result in a link error if somewhere else a compat_sys_brk() function exists, which probably should have been used instead. Two more BUILD_BUG_ONs make sure the size and type of each compat syscall parameter can be handled correctly with the s390 specific macros. I converted the compat system calls step by step to verify the generated code is correct and matches the previous code. In fact it did not always match, however that was always a bug in the hand written asm code. In result we get less code, less bugs, and much more sanity checking" * 'compat' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits) s390/compat: add copyright statement compat: include linux/unistd.h within linux/compat.h s390/compat: get rid of compat wrapper assembly code s390/compat: build error for large compat syscall args mm/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types kexec/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types net/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types ipc/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types fs/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types ipc/compat: convert to COMPAT_SYSCALL_DEFINE fs/compat: convert to COMPAT_SYSCALL_DEFINE security/compat: convert to COMPAT_SYSCALL_DEFINE mm/compat: convert to COMPAT_SYSCALL_DEFINE net/compat: convert to COMPAT_SYSCALL_DEFINE kernel/compat: convert to COMPAT_SYSCALL_DEFINE fs/compat: optional preadv64/pwrite64 compat system calls ipc/compat_sys_msgrcv: change msgtyp type from long to compat_long_t s390/compat: partial parameter conversion within syscall wrappers s390/compat: automatic zero, sign and pointer conversion of syscalls s390/compat: add sync_file_range and fallocate compat syscalls ...
2014-03-31Merge branch 'x86-asmlinkage-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 LTO changes from Peter Anvin: "More infrastructure work in preparation for link-time optimization (LTO). Most of these changes is to make sure symbols accessed from assembly code are properly marked as visible so the linker doesn't remove them. My understanding is that the changes to support LTO are still not upstream in binutils, but are on the way there. This patchset should conclude the x86-specific changes, and remaining patches to actually enable LTO will be fed through the Kbuild tree (other than keeping up with changes to the x86 code base, of course), although not necessarily in this merge window" * 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) Kbuild, lto: Handle basic LTO in modpost Kbuild, lto: Disable LTO for asm-offsets.c Kbuild, lto: Add a gcc-ld script to let run gcc as ld Kbuild, lto: add ld-version and ld-ifversion macros Kbuild, lto: Drop .number postfixes in modpost Kbuild, lto, workaround: Don't warn for initcall_reference in modpost lto: Disable LTO for sys_ni lto: Handle LTO common symbols in module loader lto, workaround: Add workaround for initcall reordering lto: Make asmlinkage __visible x86, lto: Disable LTO for the x86 VDSO initconst, x86: Fix initconst mistake in ts5500 code initconst: Fix initconst mistake in dcdbas asmlinkage: Make trace_hardirqs_on/off_caller visible asmlinkage, x86: Fix 32bit memcpy for LTO asmlinkage Make __stack_chk_failed and memcmp visible asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage asmlinkage: Make main_extable_sort_needed visible asmlinkage, mutex: Mark __visible asmlinkage: Make trace_hardirq visible ...
2014-03-31Merge branch 'x86-kaslr-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kaslr update from Ingo Molnar: "This adds kernel module load address randomization" * 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kaslr: fix module lock ordering problem x86, kaslr: randomize module base load address
2014-03-31Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 hyperv change from Ingo Molnar: "Skip the timer_irq_works() check on hyperv systems" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, hyperv: Bypass the timer_irq_works() check
2014-03-31Merge branch 'x86-hash-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 hashing changes from Ingo Molnar: "Small fixes and cleanups to the librarized arch_fast_hash() methods, used by the net/openvswitch code" * 'x86-hash-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, hash: Simplify switch, add __init annotation x86, hash: Swap arguments passed to crc32_u32() x86, hash: Fix build failure with older binutils
2014-03-31Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI changes from Ingo Molnar: "The main changes: - Add debug code to the dump EFI pagetable - Borislav Petkov - Make 1:1 runtime mapping robust when booting on machines with lots of memory - Borislav Petkov - Move the EFI facilities bits out of 'x86_efi_facility' and into efi.flags which is the standard architecture independent place to keep EFI state, by Matt Fleming. - Add 'EFI mixed mode' support: this allows 64-bit kernels to be booted from 32-bit firmware. This needs a bootloader that supports the 'EFI handover protocol'. By Matt Fleming" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86, efi: Abstract x86 efi_early calls x86/efi: Restore 'attr' argument to query_variable_info() x86/efi: Rip out phys_efi_get_time() x86/efi: Preserve segment registers in mixed mode x86/boot: Fix non-EFI build x86, tools: Fix up compiler warnings x86/efi: Re-disable interrupts after calling firmware services x86/boot: Don't overwrite cr4 when enabling PAE x86/efi: Wire up CONFIG_EFI_MIXED x86/efi: Add mixed runtime services support x86/efi: Firmware agnostic handover entry points x86/efi: Split the boot stub into 32/64 code paths x86/efi: Add early thunk code to go from 64-bit to 32-bit x86/efi: Build our own EFI services pointer table efi: Add separate 32-bit/64-bit definitions x86/efi: Delete dead code when checking for non-native x86/mm/pageattr: Always dump the right page table in an oops x86, tools: Consolidate #ifdef code x86/boot: Cleanup header.S by removing some #ifdefs efi: Use NULL instead of 0 for pointer ...
2014-03-31Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 debug cleanup from Ingo Molnar: "A single trivial cleanup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: i386: Remove unneeded test of 'task' in dump_trace() (again)
2014-03-31Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu handling changes from Ingo Molnar: "Bigger changes: - Intel CPU hardware-enablement: new vector instructions support (AVX-512), by Fenghua Yu. - Support the clflushopt instruction and use it in appropriate places. clflushopt is similar to clflush but with more relaxed ordering, by Ross Zwisler. - MSR accessor cleanups, by Borislav Petkov. - 'forcepae' boot flag for those who have way too much time to spend on way too old Pentium-M systems and want to live way too dangerously, by Chris Bainbridge" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu: Add forcepae parameter for booting PAE kernels on PAE-disabled Pentium M Rename TAINT_UNSAFE_SMP to TAINT_CPU_OUT_OF_SPEC x86, intel: Make MSR_IA32_MISC_ENABLE bit constants systematic x86, Intel: Convert to the new bit access MSR accessors x86, AMD: Convert to the new bit access MSR accessors x86: Add another set of MSR accessor functions x86: Use clflushopt in drm_clflush_virt_range x86: Use clflushopt in drm_clflush_page x86: Use clflushopt in clflush_cache_range x86: Add support for the clflushopt instruction x86, AVX-512: Enable AVX-512 States Context Switch x86, AVX-512: AVX-512 Feature Detection
2014-03-31Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Various smaller cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, pageattr: Correct WBINVD spelling in comment x86, crash: Unify ifdef x86, boot: Correct max ramdisk size name
2014-03-31Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build change from Ingo Molnar: "Explicitly disable x87 FPU instructions, to catch mistaken floating point use at build time, instead of crashing or misbehaving during run time" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Disable generation of traditional x87 instructions
2014-03-31Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic changes from Ingo Molnar: "An xAPIC CPU hotplug race fix, plus cleanups and minor fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Plug racy xAPIC access of CPU hotplug code x86/apic: Always define nox2apic and define it as initdata x86/apic: Remove unused function prototypes x86/apic: Switch wait_for_init_deassert() to a bool flag x86/apic: Only use default_wait_for_init_deassert()
2014-03-31Merge branch 'x86-acpi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 acpi numa fix from Ingo Molnar: "A single NUMA CPU hotplug fix" * 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, acpi: Fix bug in associating hot-added CPUs with corresponding NUMA node
2014-03-31Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Bigger changes: - sched/idle restructuring: they are WIP preparation for deeper integration between the scheduler and idle state selection, by Nicolas Pitre. - add NUMA scheduling pseudo-interleaving, by Rik van Riel. - optimize cgroup context switches, by Peter Zijlstra. - RT scheduling enhancements, by Thomas Gleixner. The rest is smaller changes, non-urgnt fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits) sched: Clean up the task_hot() function sched: Remove double calculation in fix_small_imbalance() sched: Fix broken setscheduler() sparc64, sched: Remove unused sparc64_multi_core sched: Remove unused mc_capable() and smt_capable() sched/numa: Move task_numa_free() to __put_task_struct() sched/fair: Fix endless loop in idle_balance() sched/core: Fix endless loop in pick_next_task() sched/fair: Push down check for high priority class task into idle_balance() sched/rt: Fix picking RT and DL tasks from empty queue trace: Replace hardcoding of 19 with MAX_NICE sched: Guarantee task priority in pick_next_task() sched/idle: Remove stale old file sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED cpuidle/arm64: Remove redundant cpuidle_idle_call() cpuidle/powernv: Remove redundant cpuidle_idle_call() sched, nohz: Exclude isolated cores from load balancing sched: Fix select_task_rq_fair() description comments workqueue: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE sys: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE ...
2014-03-31Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "Main changes: Kernel side changes: - Add SNB/IVB/HSW client uncore memory controller support (Stephane Eranian) - Fix various x86/P4 PMU driver bugs (Don Zickus) Tooling, user visible changes: - Add several futex 'perf bench' microbenchmarks (Davidlohr Bueso) - Speed up thread map generation (Don Zickus) - Introduce 'perf kvm --list-cmds' command line option for use by scripts (Ramkumar Ramachandra) - Print the evsel name in the annotate stdio output, prep to fix support outputting annotation for multiple events, not just for the first one (Arnaldo Carvalho de Melo) - Allow setting preferred callchain method in .perfconfig (Jiri Olsa) - Show in what binaries/modules 'perf probe's are set (Masami Hiramatsu) - Support distro-style debuginfo for uprobe in 'perf probe' (Masami Hiramatsu) Tooling, internal changes and fixes: - Use tid in mmap/mmap2 events to find maps (Don Zickus) - Record the reason for filtering an address_location (Namhyung Kim) - Apply all filters to an addr_location (Namhyung Kim) - Merge al->filtered with hist_entry->filtered in report/hists (Namhyung Kim) - Fix memory leak when synthesizing thread records (Namhyung Kim) - Use ui__has_annotation() in 'report' (Namhyung Kim) - hists browser refactorings to reuse code accross UIs (Namhyung Kim) - Add support for the new DWARF unwinder library in elfutils (Jiri Olsa) - Fix build race in the generation of bison files (Jiri Olsa) - Further streamline the feature detection display, trimming it a bit to show just the libraries detected, using VF=1 gets a more verbose output, showing the less interesting feature checks as well (Jiri Olsa). - Check compatible symtab type before loading dso (Namhyung Kim) - Check return value of filename__read_debuglink() (Stephane Eranian) - Move some hashing and fs related code from tools/perf/util/ to tools/lib/ so that it can be used by more tools/ living utilities (Borislav Petkov) - Prepare DWARF unwinding code for using an elfutils alternative unwinding library (Jiri Olsa) - Fix DWARF unwind max_stack processing (Jiri Olsa) - Add dwarf unwind 'perf test' entry (Jiri Olsa) - 'perf probe' improvements including memory leak fixes, sharing the intlist class with other tools, uprobes/kprobes code sharing and use of ref_reloc_sym (Masami Hiramatsu) - Shorten sample symbol resolving by adding cpumode to struct addr_location (Arnaldo Carvalho de Melo) - Fix synthesizing mmaps for threads (Don Zickus) - Fix invalid output on event group stdio report (Namhyung Kim) - Fixup header alignment in 'perf sched latency' output (Ramkumar Ramachandra) - Fix off-by-one error in 'perf timechart record' argv handling (Ramkumar Ramachandra) Tooling, cleanups: - Remove unused thread__find_map function (Jiri Olsa) - Remove unused simple_strtoul() function (Ramkumar Ramachandra) Tooling, documentation updates: - Update function names in debug messages (Ramkumar Ramachandra) - Update some code references in design.txt (Ramkumar Ramachandra) - Clarify load-latency information in the 'perf mem' docs (Andi Kleen) - Clarify x86 register naming in 'perf probe' docs (Andi Kleen)" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (96 commits) perf tools: Remove unused simple_strtoul() function perf tools: Update some code references in design.txt perf evsel: Update function names in debug messages perf tools: Remove thread__find_map function perf annotate: Print the evsel name in the stdio output perf report: Use ui__has_annotation() perf tools: Fix memory leak when synthesizing thread records perf tools: Use tid in mmap/mmap2 events to find maps perf report: Merge al->filtered with hist_entry->filtered perf symbols: Apply all filters to an addr_location perf symbols: Record the reason for filtering an address_location perf sched: Fixup header alignment in 'latency' output perf timechart: Fix off-by-one error in 'record' argv handling perf machine: Factor machine__find_thread to take tid argument perf tools: Speed up thread map generation perf kvm: introduce --list-cmds for use by scripts perf ui hists: Pass evsel to hpp->header/width functions explicitly perf symbols: Introduce thread__find_cpumode_addr_location perf session: Change header.misc dump from decimal to hex perf ui/tui: Reuse generic __hpp__fmt() code ...
2014-03-31Merge branch 'core-types-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull hweight type fix from Ingo Molnar: "This lone commit makes sure that __const_hweight8() is unsigned, which addresses a build warning if code is built with -Wsign-compare. I hope the type cast in this cleanup is fine - another option would be to eliminate the double unary negation and use a construct with more obvious integer type characteristics, along the lines of: ((w) & (1ULL << 1) ? 1U : 0U) or so" * 'core-types-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bitops: Fix signedness of compile-time hweight implementations
2014-03-31Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "Main changes: - Torture-test changes, including refactoring of rcutorture and introduction of a vestigial locktorture. - Real-time latency fixes. - Documentation updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) rcu: Provide grace-period piggybacking API rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c notifier: Substitute rcu_access_pointer() for rcu_dereference_raw() Documentation/memory-barriers.txt: Clarify release/acquire ordering rcutorture: Save kvm.sh output to log rcutorture: Add a lock_busted to test the test rcutorture: Place kvm-test-1-run.sh output into res directory rcutorture: Rename TREE_RCU-Kconfig.txt locktorture: Add kvm-recheck.sh plug-in for locktorture rcutorture: Gracefully handle NULL cleanup hooks locktorture: Add vestigial locktorture configuration rcutorture: Introduce "rcu" directory level underneath configs rcutorture: Rename kvm-test-1-rcu.sh rcutorture: Remove RCU dependencies from ver_functions.sh API rcutorture: Create CFcommon file for common Kconfig parameters rcutorture: Create config files for scripted test-the-test testing rcutorture: Add an rcu_busted to test the test locktorture: Add a lock-torture kernel module rcutorture: Abstract kvm-recheck.sh ...
2014-03-31Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The biggest change is the MCS spinlock generalization changes from Tim Chen, Peter Zijlstra, Jason Low et al. There's also lockdep fixes/enhancements from Oleg Nesterov, in particular a false negative fix related to lockdep_set_novalidate_class() usage" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) locking/mutex: Fix debug checks locking/mutexes: Add extra reschedule point locking/mutexes: Introduce cancelable MCS lock for adaptive spinning locking/mutexes: Unlock the mutex without the wait_lock locking/mutexes: Modify the way optimistic spinners are queued locking/mutexes: Return false if task need_resched() in mutex_can_spin_on_owner() locking: Move mcs_spinlock.h into kernel/locking/ m68k: Skip futex_atomic_cmpxchg_inatomic() test futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test Revert "sched/wait: Suppress Sparse 'variable shadowing' warning" lockdep: Change lockdep_set_novalidate_class() to use _and_name lockdep: Change mark_held_locks() to check hlock->check instead of lockdep_no_validate lockdep: Don't create the wrong dependency on hlock->check == 0 lockdep: Make held_lock->check and "int check" argument bool locking/mcs: Allow architecture specific asm files to be used for contended case locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order sched/wait: Suppress Sparse 'variable shadowing' warning hung_task/Documentation: Fix hung_task_warnings description locking/mcs: Allow architectures to hook in to contended paths locking/mcs: Micro-optimize the MCS code, add extra comments ...
2014-03-31m68k: Update defconfigs for v3.14-rc1Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-03-30Linux 3.14Linus Torvalds
2014-03-30Merge branch 'for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Switch mnt_hash to hlist, turning the races between __lookup_mnt() and hash modifications into false negatives from __lookup_mnt() (instead of hangs)" On the false negatives from __lookup_mnt(): "The *only* thing we care about is not getting stuck in __lookup_mnt(). If it misses an entry because something in front of it just got moved around, etc, we are fine. We'll notice that mount_lock mismatch and that'll be it" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch mnt_hash to hlist don't bother with propagate_mnt() unless the target is shared keep shadowed vfsmounts together resizable namespace.c hashes
2014-03-30MAINTAINERS: resume as Documentation maintainerRandy Dunlap
I am the new kernel tree Documentation maintainer (except for parts that are handled by other people, of course). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Some more updates for the input subsystem. You will get a fix for race in mousedev that has been causing quite a few oopses lately and a small fixup for force feedback support in evdev" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mousedev - fix race when creating mixed device Input: don't modify the id of ioctl-provided ff effect on upload failure
2014-03-30AUDIT: Allow login in non-init namespacesEric Paris
It its possible to configure your PAM stack to refuse login if audit messages (about the login) were unable to be sent. This is common in many distros and thus normal configuration of many containers. The PAM modules determine if audit is enabled/disabled in the kernel based on the return value from sending an audit message on the netlink socket. If userspace gets back ECONNREFUSED it believes audit is disabled in the kernel. If it gets any other error else it refuses to let the login proceed. Just about ever since the introduction of namespaces the kernel audit subsystem has returned EPERM if the task sending a message was not in the init user or pid namespace. So many forms of containers have never worked if audit was enabled in the kernel. BUT if the container was not in net_init then the kernel network code would send ECONNREFUSED (instead of the audit code sending EPERM). Thus by pure accident/dumb luck/bug if an admin configured the PAM stack to reject all logins that didn't talk to audit, but then ran the login untility in the non-init_net namespace, it would work!! Clearly this was a bug, but it is a bug some people expected. With the introduction of network namespace support in 3.14-rc1 the two bugs stopped cancelling each other out. Now, containers in the non-init_net namespace refused to let users log in (just like PAM was configfured!) Obviously some people were not happy that what used to let users log in, now didn't! This fix is kinda hacky. We return ECONNREFUSED for all non-init relevant namespaces. That means that not only will the old broken non-init_net setups continue to work, now the broken non-init_pid or non-init_user setups will 'work'. They don't really work, since audit isn't logging things. But it's what most users want. In 3.15 we should have patches to support not only the non-init_net (3.14) namespace but also the non-init_pid and non-init_user namespace. So all will be right in the world. This just opens the doors wide open on 3.14 and hopefully makes users happy, if not the audit system... Reported-by: Andre Tomt <andre@tomt.net> Reported-by: Adam Richter <adam_richter2004@yahoo.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30ext4: atomically set inode->i_flags in ext4_set_inode_flags()Theodore Ts'o
Use cmpxchg() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time. Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30switch mnt_hash to hlistAl Viro
fixes RCU bug - walking through hlist is safe in face of element moves, since it's self-terminating. Cyclic lists are not - if we end up jumping to another hash chain, we'll loop infinitely without ever hitting the original list head. [fix for dumb braino folded] Spotted by: Max Kellermann <mk@cm4all.com> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30don't bother with propagate_mnt() unless the target is sharedAl Viro
If the dest_mnt is not shared, propagate_mnt() does nothing - there's no mounts to propagate to and thus no copies to create. Might as well don't bother calling it in that case. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30keep shadowed vfsmounts togetherAl Viro
preparation to switching mnt_hash to hlist Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30resizable namespace.c hashesAl Viro
* switch allocation to alloc_large_system_hash() * make sizes overridable by boot parameters (mhash_entries=, mphash_entries=) * switch mountpoint_hashtable from list_head to hlist_head Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-29Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A late breaking fix from John. (The bug fixed has a hard lockup potential, but that was not observed, warnings were)" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Revert to calling clock_was_set_delayed() while in irq context
2014-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This drops a bad assert that a few users have been hitting but we've only recently been able to track down" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: drop an unsafe assertion
2014-03-29Input: mousedev - fix race when creating mixed deviceDmitry Torokhov
We should not be using static variable mousedev_mix in methods that can be called before that singleton gets assigned. While at it let's add open and close methods to mousedev structure so that we do not need to test if we are dealing with multiplexor or normal device and simply call appropriate method directly. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551 Reported-by: GiulioDP <depasquale.giulio@gmail.com> Tested-by: GiulioDP <depasquale.giulio@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-29Input: don't modify the id of ioctl-provided ff effect on upload failureElias Vanderstuyft
If a new (id == -1) ff effect was uploaded from userspace, ff-core.c::input_ff_upload() will have assigned a positive number to the new effect id. Currently, evdev.c::evdev_do_ioctl() will save this new id to userspace, regardless of whether the upload succeeded or not. On upload failure, this can be confusing because the dev->ff->effects[] array will not contain an element at the index of that new effect id. This patch fixes this by leaving the id unchanged after upload fails. Note: Unfortunately applications should still expect changed effect id for quite some time. This has been discussed on: http://www.mail-archive.com/linux-input@vger.kernel.org/msg08513.html ("ff-core effect id handling in case of a failed effect upload") Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-29rbd: drop an unsafe assertionAlex Elder
Olivier Bonvalet reported having repeated crashes due to a failed assertion he was hitting in rbd_img_obj_callback(): Assertion failure in rbd_img_obj_callback() at line 2165: rbd_assert(which >= img_request->next_completion); With a lot of help from Olivier with reproducing the problem we were able to determine the object and image requests had already been completed (and often freed) at the point the assertion failed. There was a great deal of discussion on the ceph-devel mailing list about this. The problem only arose when there were two (or more) object requests in an image request, and the problem was always seen when the second request was being completed. The problem is due to a race in the window between setting the "done" flag on an object request and checking the image request's next completion value. When the first object request completes, it checks to see if its successor request is marked "done", and if so, that request is also completed. In the process, the image request's next_completion value is updated to reflect that both the first and second requests are completed. By the time the second request is able to check the next_completion value, it has been set to a value *greater* than its own "which" value, which caused an assertion to fail. Fix this problem by skipping over any completion processing unless the completing object request is the next one expected. Test only for inequality (not >=), and eliminate the bad assertion. Tested-by: Olivier Bonvalet <ob@daevel.fr> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-03-29workqueue: remove deprecated WQ_NON_REENTRANTZhangZhen
Tejun Heo has made WQ_NON_REENTRANT useless in the dbf2576e37 ("workqueue: make all workqueues non-reentrant"). So remove its usages and definition. This patch doesn't introduce any behavior changes. tj: minor description updates. Signed-off-by: ZhangZhen <zhenzhang.zhang@huawei.com> Sigend-off-by: Tejun Heo <tj@kernel.org> Acked-by: James Chapman <jchapman@katalix.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-03-29percpu: renew the max_contig if we merge the head and previous blockJianyu Zhan
During pcpu_alloc_area(), we might merge the current head with the previous block. Since we have calculated the max_contig using the size of previous block before we skip it, and now we update the size of previous block, so we should renew the max_contig. Signed-off-by: Jianyu Zhan <nasa4836@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>