aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/fbdev/fsl-diu-fb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/fsl-diu-fb.c')
-rw-r--r--drivers/video/fbdev/fsl-diu-fb.c1994
1 files changed, 1994 insertions, 0 deletions
diff --git a/drivers/video/fbdev/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
new file mode 100644
index 000000000000..e8758b9c3bcc
--- /dev/null
+++ b/drivers/video/fbdev/fsl-diu-fb.c
@@ -0,0 +1,1994 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Freescale DIU Frame Buffer device driver
+ *
+ * Authors: Hongjun Chen <hong-jun.chen@freescale.com>
+ * Paul Widmer <paul.widmer@freescale.com>
+ * Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ * York Sun <yorksun@freescale.com>
+ *
+ * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/spinlock.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <sysdev/fsl_soc.h>
+#include <linux/fsl-diu-fb.h>
+#include "edid.h"
+
+#define NUM_AOIS 5 /* 1 for plane 0, 2 for planes 1 & 2 each */
+
+/* HW cursor parameters */
+#define MAX_CURS 32
+
+/* INT_STATUS/INT_MASK field descriptions */
+#define INT_VSYNC 0x01 /* Vsync interrupt */
+#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */
+#define INT_UNDRUN 0x04 /* Under run exception interrupt */
+#define INT_PARERR 0x08 /* Display parameters error interrupt */
+#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */
+
+/*
+ * List of supported video modes
+ *
+ * The first entry is the default video mode. The remain entries are in
+ * order if increasing resolution and frequency. The 320x240-60 mode is
+ * the initial AOI for the second and third planes.
+ */
+static struct fb_videomode fsl_diu_mode_db[] = {
+ {
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 79440,
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 16,
+ .lower_margin = 5,
+ .hsync_len = 48,
+ .vsync_len = 1,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39722,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 72,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 32052,
+ .left_margin = 128,
+ .right_margin = 24,
+ .upper_margin = 28,
+ .lower_margin = 9,
+ .hsync_len = 40,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 75,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 31747,
+ .left_margin = 120,
+ .right_margin = 16,
+ .upper_margin = 16,
+ .lower_margin = 1,
+ .hsync_len = 64,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 90,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 25057,
+ .left_margin = 120,
+ .right_margin = 32,
+ .upper_margin = 14,
+ .lower_margin = 25,
+ .hsync_len = 40,
+ .vsync_len = 14,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 100,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 22272,
+ .left_margin = 48,
+ .right_margin = 32,
+ .upper_margin = 17,
+ .lower_margin = 22,
+ .hsync_len = 128,
+ .vsync_len = 12,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 33805,
+ .left_margin = 96,
+ .right_margin = 24,
+ .upper_margin = 10,
+ .lower_margin = 3,
+ .hsync_len = 72,
+ .vsync_len = 7,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 25000,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 23,
+ .lower_margin = 1,
+ .hsync_len = 128,
+ .vsync_len = 4,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 854,
+ .yres = 480,
+ .pixclock = 31518,
+ .left_margin = 104,
+ .right_margin = 16,
+ .upper_margin = 13,
+ .lower_margin = 1,
+ .hsync_len = 88,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 70,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 16886,
+ .left_margin = 3,
+ .right_margin = 3,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 40,
+ .vsync_len = 18,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 75,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15009,
+ .left_margin = 3,
+ .right_margin = 3,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 80,
+ .vsync_len = 32,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 480,
+ .pixclock = 18939,
+ .left_margin = 353,
+ .right_margin = 47,
+ .upper_margin = 39,
+ .lower_margin = 4,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 720,
+ .pixclock = 13426,
+ .left_margin = 192,
+ .right_margin = 64,
+ .upper_margin = 22,
+ .lower_margin = 1,
+ .hsync_len = 136,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9375,
+ .left_margin = 38,
+ .right_margin = 128,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .hsync_len = 216,
+ .vsync_len = 37,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 70,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9380,
+ .left_margin = 6,
+ .right_margin = 6,
+ .upper_margin = 4,
+ .lower_margin = 4,
+ .hsync_len = 60,
+ .vsync_len = 94,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 75,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9380,
+ .left_margin = 6,
+ .right_margin = 6,
+ .upper_margin = 4,
+ .lower_margin = 4,
+ .hsync_len = 60,
+ .vsync_len = 15,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+ {
+ .refresh = 60,
+ .xres = 1920,
+ .yres = 1080,
+ .pixclock = 5787,
+ .left_margin = 328,
+ .right_margin = 120,
+ .upper_margin = 34,
+ .lower_margin = 1,
+ .hsync_len = 208,
+ .vsync_len = 3,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+ },
+};
+
+static char *fb_mode;
+static unsigned long default_bpp = 32;
+static enum fsl_diu_monitor_port monitor_port;
+static char *monitor_string;
+
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+static u8 *coherence_data;
+static size_t coherence_data_size;
+static unsigned int d_cache_line_size;
+#endif
+
+static DEFINE_SPINLOCK(diu_lock);
+
+enum mfb_index {
+ PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */
+ PLANE1_AOI0, /* Plane 1, first AOI */
+ PLANE1_AOI1, /* Plane 1, second AOI */
+ PLANE2_AOI0, /* Plane 2, first AOI */
+ PLANE2_AOI1, /* Plane 2, second AOI */
+};
+
+struct mfb_info {
+ enum mfb_index index;
+ char *id;
+ int registered;
+ unsigned long pseudo_palette[16];
+ struct diu_ad *ad;
+ unsigned char g_alpha;
+ unsigned int count;
+ int x_aoi_d; /* aoi display x offset to physical screen */
+ int y_aoi_d; /* aoi display y offset to physical screen */
+ struct fsl_diu_data *parent;
+};
+
+/**
+ * struct fsl_diu_data - per-DIU data structure
+ * @dma_addr: DMA address of this structure
+ * @fsl_diu_info: fb_info objects, one per AOI
+ * @dev_attr: sysfs structure
+ * @irq: IRQ
+ * @monitor_port: the monitor port this DIU is connected to
+ * @diu_reg: pointer to the DIU hardware registers
+ * @reg_lock: spinlock for register access
+ * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI
+ * dummy_ad: DIU Area Descriptor for the dummy AOI
+ * @ad[]: Area Descriptors for each real AOI
+ * @gamma: gamma color table
+ * @cursor: hardware cursor data
+ *
+ * This data structure must be allocated with 32-byte alignment, so that the
+ * internal fields can be aligned properly.
+ */
+struct fsl_diu_data {
+ dma_addr_t dma_addr;
+ struct fb_info fsl_diu_info[NUM_AOIS];
+ struct mfb_info mfb[NUM_AOIS];
+ struct device_attribute dev_attr;
+ unsigned int irq;
+ enum fsl_diu_monitor_port monitor_port;
+ struct diu __iomem *diu_reg;
+ spinlock_t reg_lock;
+ u8 dummy_aoi[4 * 4 * 4];
+ struct diu_ad dummy_ad __aligned(8);
+ struct diu_ad ad[NUM_AOIS] __aligned(8);
+ u8 gamma[256 * 3] __aligned(32);
+ /* It's easier to parse the cursor data as little-endian */
+ __le16 cursor[MAX_CURS * MAX_CURS] __aligned(32);
+ /* Blank cursor data -- used to hide the cursor */
+ __le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32);
+ uint8_t edid_data[EDID_LENGTH];
+ bool has_edid;
+} __aligned(32);
+
+/* Determine the DMA address of a member of the fsl_diu_data structure */
+#define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f))
+
+static struct mfb_info mfb_template[] = {
+ {
+ .index = PLANE0,
+ .id = "Panel0",
+ .registered = 0,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
+ },
+ {
+ .index = PLANE1_AOI0,
+ .id = "Panel1 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
+ },
+ {
+ .index = PLANE1_AOI1,
+ .id = "Panel1 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 480,
+ },
+ {
+ .index = PLANE2_AOI0,
+ .id = "Panel2 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 0,
+ },
+ {
+ .index = PLANE2_AOI1,
+ .id = "Panel2 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 480,
+ },
+};
+
+#ifdef DEBUG
+static void __attribute__ ((unused)) fsl_diu_dump(struct diu __iomem *hw)
+{
+ mb();
+ pr_debug("DIU: desc=%08x,%08x,%08x, gamma=%08x pallete=%08x "
+ "cursor=%08x curs_pos=%08x diu_mode=%08x bgnd=%08x "
+ "disp_size=%08x hsyn_para=%08x vsyn_para=%08x syn_pol=%08x "
+ "thresholds=%08x int_mask=%08x plut=%08x\n",
+ hw->desc[0], hw->desc[1], hw->desc[2], hw->gamma,
+ hw->pallete, hw->cursor, hw->curs_pos, hw->diu_mode,
+ hw->bgnd, hw->disp_size, hw->hsyn_para, hw->vsyn_para,
+ hw->syn_pol, hw->thresholds, hw->int_mask, hw->plut);
+ rmb();
+}
+#endif
+
+/**
+ * fsl_diu_name_to_port - convert a port name to a monitor port enum
+ *
+ * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
+ * the enum fsl_diu_monitor_port that corresponds to that string.
+ *
+ * For compatibility with older versions, a number ("0", "1", or "2") is also
+ * supported.
+ *
+ * If the string is unknown, DVI is assumed.
+ *
+ * If the particular port is not supported by the platform, another port
+ * (platform-specific) is chosen instead.
+ */
+static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
+{
+ enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
+ unsigned long val;
+
+ if (s) {
+ if (!kstrtoul(s, 10, &val) && (val <= 2))
+ port = (enum fsl_diu_monitor_port) val;
+ else if (strncmp(s, "lvds", 4) == 0)
+ port = FSL_DIU_PORT_LVDS;
+ else if (strncmp(s, "dlvds", 5) == 0)
+ port = FSL_DIU_PORT_DLVDS;
+ }
+
+ return diu_ops.valid_monitor_port(port);
+}
+
+/*
+ * Workaround for failed writing desc register of planes.
+ * Needed with MPC5121 DIU rev 2.0 silicon.
+ */
+void wr_reg_wa(u32 *reg, u32 val)
+{
+ do {
+ out_be32(reg, val);
+ } while (in_be32(reg) != val);
+}
+
+static void fsl_diu_enable_panel(struct fb_info *info)
+{
+ struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu __iomem *hw = data->diu_reg;
+
+ switch (mfbi->index) {
+ case PLANE0:
+ wr_reg_wa(&hw->desc[0], ad->paddr);
+ break;
+ case PLANE1_AOI0:
+ cmfbi = &data->mfb[2];
+ if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
+ if (cmfbi->count > 0) /* AOI1 open */
+ ad->next_ad =
+ cpu_to_le32(cmfbi->ad->paddr);
+ else
+ ad->next_ad = 0;
+ wr_reg_wa(&hw->desc[1], ad->paddr);
+ }
+ break;
+ case PLANE2_AOI0:
+ cmfbi = &data->mfb[4];
+ if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
+ if (cmfbi->count > 0) /* AOI1 open */
+ ad->next_ad =
+ cpu_to_le32(cmfbi->ad->paddr);
+ else
+ ad->next_ad = 0;
+ wr_reg_wa(&hw->desc[2], ad->paddr);
+ }
+ break;
+ case PLANE1_AOI1:
+ pmfbi = &data->mfb[1];
+ ad->next_ad = 0;
+ if (hw->desc[1] == data->dummy_ad.paddr)
+ wr_reg_wa(&hw->desc[1], ad->paddr);
+ else /* AOI0 open */
+ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+ break;
+ case PLANE2_AOI1:
+ pmfbi = &data->mfb[3];
+ ad->next_ad = 0;
+ if (hw->desc[2] == data->dummy_ad.paddr)
+ wr_reg_wa(&hw->desc[2], ad->paddr);
+ else /* AOI0 was open */
+ pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+ break;
+ }
+}
+
+static void fsl_diu_disable_panel(struct fb_info *info)
+{
+ struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu __iomem *hw = data->diu_reg;
+
+ switch (mfbi->index) {
+ case PLANE0:
+ wr_reg_wa(&hw->desc[0], 0);
+ break;
+ case PLANE1_AOI0:
+ cmfbi = &data->mfb[2];
+ if (cmfbi->count > 0) /* AOI1 is open */
+ wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
+ /* move AOI1 to the first */
+ else /* AOI1 was closed */
+ wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr);
+ /* close AOI 0 */
+ break;
+ case PLANE2_AOI0:
+ cmfbi = &data->mfb[4];
+ if (cmfbi->count > 0) /* AOI1 is open */
+ wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
+ /* move AOI1 to the first */
+ else /* AOI1 was closed */
+ wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr);
+ /* close AOI 0 */
+ break;
+ case PLANE1_AOI1:
+ pmfbi = &data->mfb[1];
+ if (hw->desc[1] != ad->paddr) {
+ /* AOI1 is not the first in the chain */
+ if (pmfbi->count > 0)
+ /* AOI0 is open, must be the first */
+ pmfbi->ad->next_ad = 0;
+ } else /* AOI1 is the first in the chain */
+ wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr);
+ /* close AOI 1 */
+ break;
+ case PLANE2_AOI1:
+ pmfbi = &data->mfb[3];
+ if (hw->desc[2] != ad->paddr) {
+ /* AOI1 is not the first in the chain */
+ if (pmfbi->count > 0)
+ /* AOI0 is open, must be the first */
+ pmfbi->ad->next_ad = 0;
+ } else /* AOI1 is the first in the chain */
+ wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr);
+ /* close AOI 1 */
+ break;
+ }
+}
+
+static void enable_lcdc(struct fb_info *info)
+{
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu __iomem *hw = data->diu_reg;
+
+ out_be32(&hw->diu_mode, MFB_MODE1);
+}
+
+static void disable_lcdc(struct fb_info *info)
+{
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu __iomem *hw = data->diu_reg;
+
+ out_be32(&hw->diu_mode, 0);
+}
+
+static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ int available_height, upper_aoi_bottom;
+ enum mfb_index index = mfbi->index;
+ int lower_aoi_is_open, upper_aoi_is_open;
+ __u32 base_plane_width, base_plane_height, upper_aoi_height;
+
+ base_plane_width = data->fsl_diu_info[0].var.xres;
+ base_plane_height = data->fsl_diu_info[0].var.yres;
+
+ if (mfbi->x_aoi_d < 0)
+ mfbi->x_aoi_d = 0;
+ if (mfbi->y_aoi_d < 0)
+ mfbi->y_aoi_d = 0;
+ switch (index) {
+ case PLANE0:
+ if (mfbi->x_aoi_d != 0)
+ mfbi->x_aoi_d = 0;
+ if (mfbi->y_aoi_d != 0)
+ mfbi->y_aoi_d = 0;
+ break;
+ case PLANE1_AOI0:
+ case PLANE2_AOI0:
+ lower_aoi_mfbi = data->fsl_diu_info[index+1].par;
+ lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
+ if (var->xres > base_plane_width)
+ var->xres = base_plane_width;
+ if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
+ mfbi->x_aoi_d = base_plane_width - var->xres;
+
+ if (lower_aoi_is_open)
+ available_height = lower_aoi_mfbi->y_aoi_d;
+ else
+ available_height = base_plane_height;
+ if (var->yres > available_height)
+ var->yres = available_height;
+ if ((mfbi->y_aoi_d + var->yres) > available_height)
+ mfbi->y_aoi_d = available_height - var->yres;
+ break;
+ case PLANE1_AOI1:
+ case PLANE2_AOI1:
+ upper_aoi_mfbi = data->fsl_diu_info[index-1].par;
+ upper_aoi_height = data->fsl_diu_info[index-1].var.yres;
+ upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
+ upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
+ if (var->xres > base_plane_width)
+ var->xres = base_plane_width;
+ if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
+ mfbi->x_aoi_d = base_plane_width - var->xres;
+ if (mfbi->y_aoi_d < 0)
+ mfbi->y_aoi_d = 0;
+ if (upper_aoi_is_open) {
+ if (mfbi->y_aoi_d < upper_aoi_bottom)
+ mfbi->y_aoi_d = upper_aoi_bottom;
+ available_height = base_plane_height
+ - upper_aoi_bottom;
+ } else
+ available_height = base_plane_height;
+ if (var->yres > available_height)
+ var->yres = available_height;
+ if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
+ mfbi->y_aoi_d = base_plane_height - var->yres;
+ break;
+ }
+}
+/*
+ * Checks to see if the hardware supports the state requested by var passed
+ * in. This function does not alter the hardware state! If the var passed in
+ * is slightly off by what the hardware can support then we alter the var
+ * PASSED in to what we can do. If the hardware doesn't support mode change
+ * a -EINVAL will be returned by the upper layers.
+ */
+static int fsl_diu_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if (var->xoffset < 0)
+ var->xoffset = 0;
+
+ if (var->yoffset < 0)
+ var->yoffset = 0;
+
+ if (var->xoffset + info->var.xres > info->var.xres_virtual)
+ var->xoffset = info->var.xres_virtual - info->var.xres;
+
+ if (var->yoffset + info->var.yres > info->var.yres_virtual)
+ var->yoffset = info->var.yres_virtual - info->var.yres;
+
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16))
+ var->bits_per_pixel = default_bpp;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 0;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 16;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+
+ break;
+ }
+
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
+
+ /* Copy nonstd field to/from sync for fbset usage */
+ var->sync |= var->nonstd;
+ var->nonstd |= var->sync;
+
+ adjust_aoi_size_position(var, info);
+ return 0;
+}
+
+static void set_fix(struct fb_info *info)
+{
+ struct fb_fix_screeninfo *fix = &info->fix;
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+
+ strncpy(fix->id, mfbi->id, sizeof(fix->id));
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+}
+
+static void update_lcdc(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu __iomem *hw;
+ int i, j;
+ u8 *gamma_table_base;
+
+ u32 temp;
+
+ hw = data->diu_reg;
+
+ if (diu_ops.set_monitor_port)
+ diu_ops.set_monitor_port(data->monitor_port);
+ gamma_table_base = data->gamma;
+
+ /* Prep for DIU init - gamma table, cursor table */
+
+ for (i = 0; i <= 2; i++)
+ for (j = 0; j <= 255; j++)
+ *gamma_table_base++ = j;
+
+ if (diu_ops.set_gamma_table)
+ diu_ops.set_gamma_table(data->monitor_port, data->gamma);
+
+ disable_lcdc(info);
+
+ /* Program DIU registers */
+
+ out_be32(&hw->gamma, DMA_ADDR(data, gamma));
+
+ out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */
+ out_be32(&hw->disp_size, (var->yres << 16) | var->xres);
+
+ /* Horizontal and vertical configuration register */
+ temp = var->left_margin << 22 | /* BP_H */
+ var->hsync_len << 11 | /* PW_H */
+ var->right_margin; /* FP_H */
+
+ out_be32(&hw->hsyn_para, temp);
+
+ temp = var->upper_margin << 22 | /* BP_V */
+ var->vsync_len << 11 | /* PW_V */
+ var->lower_margin; /* FP_V */
+
+ out_be32(&hw->vsyn_para, temp);
+
+ diu_ops.set_pixel_clock(var->pixclock);
+
+#ifndef CONFIG_PPC_MPC512x
+ /*
+ * The PLUT register is defined differently on the MPC5121 than it
+ * is on other SOCs. Unfortunately, there's no documentation that
+ * explains how it's supposed to be programmed, so for now, we leave
+ * it at the default value on the MPC5121.
+ *
+ * For other SOCs, program it for the highest priority, which will
+ * reduce the chance of underrun. Technically, we should scale the
+ * priority to match the screen resolution, but doing that properly
+ * requires delicate fine-tuning for each use-case.
+ */
+ out_be32(&hw->plut, 0x01F5F666);
+#endif
+
+ /* Enable the DIU */
+ enable_lcdc(info);
+}
+
+static int map_video_memory(struct fb_info *info)
+{
+ u32 smem_len = info->fix.line_length * info->var.yres_virtual;
+ void *p;
+
+ p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO);
+ if (!p) {
+ dev_err(info->dev, "unable to allocate fb memory\n");
+ return -ENOMEM;
+ }
+ mutex_lock(&info->mm_lock);
+ info->screen_base = p;
+ info->fix.smem_start = virt_to_phys(info->screen_base);
+ info->fix.smem_len = smem_len;
+ mutex_unlock(&info->mm_lock);
+ info->screen_size = info->fix.smem_len;
+
+ return 0;
+}
+
+static void unmap_video_memory(struct fb_info *info)
+{
+ void *p = info->screen_base;
+ size_t l = info->fix.smem_len;
+
+ mutex_lock(&info->mm_lock);
+ info->screen_base = NULL;
+ info->fix.smem_start = 0;
+ info->fix.smem_len = 0;
+ mutex_unlock(&info->mm_lock);
+
+ if (p)
+ free_pages_exact(p, l);
+}
+
+/*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+
+ /* AOI should not be greater than display size */
+ ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+ ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+ return 0;
+}
+
+/**
+ * fsl_diu_get_pixel_format: return the pixel format for a given color depth
+ *
+ * The pixel format is a 32-bit value that determine which bits in each
+ * pixel are to be used for each color. This is the default function used
+ * if the platform does not define its own version.
+ */
+static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel)
+{
+#define PF_BYTE_F 0x10000000
+#define PF_ALPHA_C_MASK 0x0E000000
+#define PF_ALPHA_C_SHIFT 25
+#define PF_BLUE_C_MASK 0x01800000
+#define PF_BLUE_C_SHIFT 23
+#define PF_GREEN_C_MASK 0x00600000
+#define PF_GREEN_C_SHIFT 21
+#define PF_RED_C_MASK 0x00180000
+#define PF_RED_C_SHIFT 19
+#define PF_PALETTE 0x00040000
+#define PF_PIXEL_S_MASK 0x00030000
+#define PF_PIXEL_S_SHIFT 16
+#define PF_COMP_3_MASK 0x0000F000
+#define PF_COMP_3_SHIFT 12
+#define PF_COMP_2_MASK 0x00000F00
+#define PF_COMP_2_SHIFT 8
+#define PF_COMP_1_MASK 0x000000F0
+#define PF_COMP_1_SHIFT 4
+#define PF_COMP_0_MASK 0x0000000F
+#define PF_COMP_0_SHIFT 0
+
+#define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \
+ cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \
+ (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \
+ (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \
+ (c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \
+ (c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT))
+
+ switch (bits_per_pixel) {
+ case 32:
+ /* 0x88883316 */
+ return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8);
+ case 24:
+ /* 0x88082219 */
+ return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0);
+ case 16:
+ /* 0x65053118 */
+ return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0);
+ default:
+ pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel);
+ return 0;
+ }
+}
+
+/*
+ * Copies a cursor image from user space to the proper place in driver
+ * memory so that the hardware can display the cursor image.
+ *
+ * Cursor data is represented as a sequence of 'width' bits packed into bytes.
+ * That is, the first 8 bits are in the first byte, the second 8 bits in the
+ * second byte, and so on. Therefore, the each row of the cursor is (width +
+ * 7) / 8 bytes of 'data'
+ *
+ * The DIU only supports cursors up to 32x32 (MAX_CURS). We reject cursors
+ * larger than this, so we already know that 'width' <= 32. Therefore, we can
+ * simplify our code by using a 32-bit big-endian integer ("line") to read in
+ * a single line of pixels, and only look at the top 'width' bits of that
+ * integer.
+ *
+ * This could result in an unaligned 32-bit read. For example, if the cursor
+ * is 24x24, then the first three bytes of 'image' contain the pixel data for
+ * the top line of the cursor. We do a 32-bit read of 'image', but we look
+ * only at the top 24 bits. Then we increment 'image' by 3 bytes. The next
+ * read is unaligned. The only problem is that we might read past the end of
+ * 'image' by 1-3 bytes, but that should not cause any problems.
+ */
+static void fsl_diu_load_cursor_image(struct fb_info *info,
+ const void *image, uint16_t bg, uint16_t fg,
+ unsigned int width, unsigned int height)
+{
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ __le16 *cursor = data->cursor;
+ __le16 _fg = cpu_to_le16(fg);
+ __le16 _bg = cpu_to_le16(bg);
+ unsigned int h, w;
+
+ for (h = 0; h < height; h++) {
+ uint32_t mask = 1 << 31;
+ uint32_t line = be32_to_cpup(image);
+
+ for (w = 0; w < width; w++) {
+ cursor[w] = (line & mask) ? _fg : _bg;
+ mask >>= 1;
+ }
+
+ cursor += MAX_CURS;
+ image += DIV_ROUND_UP(width, 8);
+ }
+}
+
+/*
+ * Set a hardware cursor. The image data for the cursor is passed via the
+ * fb_cursor object.
+ */
+static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu __iomem *hw = data->diu_reg;
+
+ if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS)
+ return -EINVAL;
+
+ /* The cursor size has changed */
+ if (cursor->set & FB_CUR_SETSIZE) {
+ /*
+ * The DIU cursor is a fixed size, so when we get this
+ * message, instead of resizing the cursor, we just clear
+ * all the image data, in expectation of new data. However,
+ * in tests this control does not appear to be normally
+ * called.
+ */
+ memset(data->cursor, 0, sizeof(data->cursor));
+ }
+
+ /* The cursor position has changed (cursor->image.dx|dy) */
+ if (cursor->set & FB_CUR_SETPOS) {
+ uint32_t xx, yy;
+
+ yy = (cursor->image.dy - info->var.yoffset) & 0x7ff;
+ xx = (cursor->image.dx - info->var.xoffset) & 0x7ff;
+
+ out_be32(&hw->curs_pos, yy << 16 | xx);
+ }
+
+ /*
+ * FB_CUR_SETIMAGE - the cursor image has changed
+ * FB_CUR_SETCMAP - the cursor colors has changed
+ * FB_CUR_SETSHAPE - the cursor bitmask has changed
+ */
+ if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) {
+ unsigned int image_size =
+ DIV_ROUND_UP(cursor->image.width, 8) * cursor->image.height;
+ unsigned int image_words =
+ DIV_ROUND_UP(image_size, sizeof(uint32_t));
+ unsigned int bg_idx = cursor->image.bg_color;
+ unsigned int fg_idx = cursor->image.fg_color;
+ uint8_t buffer[image_size];
+ uint32_t *image, *source, *mask;
+ uint16_t fg, bg;
+ unsigned int i;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return 0;
+
+ /*
+ * Determine the size of the cursor image data. Normally,
+ * it's 8x16.
+ */
+ image_size = DIV_ROUND_UP(cursor->image.width, 8) *
+ cursor->image.height;
+
+ bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) |
+ ((info->cmap.green[bg_idx] & 0xf8) << 2) |
+ ((info->cmap.blue[bg_idx] & 0xf8) >> 3) |
+ 1 << 15;
+
+ fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) |
+ ((info->cmap.green[fg_idx] & 0xf8) << 2) |
+ ((info->cmap.blue[fg_idx] & 0xf8) >> 3) |
+ 1 << 15;
+
+ /* Use 32-bit operations on the data to improve performance */
+ image = (uint32_t *)buffer;
+ source = (uint32_t *)cursor->image.data;
+ mask = (uint32_t *)cursor->mask;
+
+ if (cursor->rop == ROP_XOR)
+ for (i = 0; i < image_words; i++)
+ image[i] = source[i] ^ mask[i];
+ else
+ for (i = 0; i < image_words; i++)
+ image[i] = source[i] & mask[i];
+
+ fsl_diu_load_cursor_image(info, image, bg, fg,
+ cursor->image.width, cursor->image.height);
+ }
+
+ /*
+ * Show or hide the cursor. The cursor data is always stored in the
+ * 'cursor' memory block, and the actual cursor position is always in
+ * the DIU's CURS_POS register. To hide the cursor, we redirect the
+ * CURSOR register to a blank cursor. The show the cursor, we
+ * redirect the CURSOR register to the real cursor data.
+ */
+ if (cursor->enable)
+ out_be32(&hw->cursor, DMA_ADDR(data, cursor));
+ else
+ out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor));
+
+ return 0;
+}
+
+/*
+ * Using the fb_var_screeninfo in fb_info we set the resolution of this
+ * particular framebuffer. This function alters the fb_fix_screeninfo stored
+ * in fb_info. It does not alter var in fb_info since we are using that
+ * data. This means we depend on the data in var inside fb_info to be
+ * supported by the hardware. fsl_diu_check_var is always called before
+ * fsl_diu_set_par to ensure this.
+ */
+static int fsl_diu_set_par(struct fb_info *info)
+{
+ unsigned long len;
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ struct diu_ad *ad = mfbi->ad;
+ struct diu __iomem *hw;
+
+ hw = data->diu_reg;
+
+ set_fix(info);
+
+ len = info->var.yres_virtual * info->fix.line_length;
+ /* Alloc & dealloc each time resolution/bpp change */
+ if (len != info->fix.smem_len) {
+ if (info->fix.smem_start)
+ unmap_video_memory(info);
+
+ /* Memory allocation for framebuffer */
+ if (map_video_memory(info)) {
+ dev_err(info->dev, "unable to allocate fb memory 1\n");
+ return -ENOMEM;
+ }
+ }
+
+ if (diu_ops.get_pixel_format)
+ ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port,
+ var->bits_per_pixel);
+ else
+ ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel);
+
+ ad->addr = cpu_to_le32(info->fix.smem_start);
+ ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+ var->xres_virtual) | mfbi->g_alpha;
+ /* AOI should not be greater than display size */
+ ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
+ ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+ ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+
+ /* Disable chroma keying function */
+ ad->ckmax_r = 0;
+ ad->ckmax_g = 0;
+ ad->ckmax_b = 0;
+
+ ad->ckmin_r = 255;
+ ad->ckmin_g = 255;
+ ad->ckmin_b = 255;
+
+ if (mfbi->index == PLANE0)
+ update_lcdc(info);
+ return 0;
+}
+
+static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
+{
+ return ((val << width) + 0x7FFF - val) >> 16;
+}
+
+/*
+ * Set a single color register. The values supplied have a 16 bit magnitude
+ * which needs to be scaled in this function for the hardware. Things to take
+ * into consideration are how many color registers, if any, are supported with
+ * the current color visual. With truecolor mode no color palettes are
+ * supported. Here a pseudo palette is created which we store the value in
+ * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
+ * color palette.
+ */
+static int fsl_diu_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
+{
+ int ret = 1;
+
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (info->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = info->pseudo_palette;
+ u32 v;
+
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ pal[regno] = v;
+ ret = 0;
+ }
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Pan (or wrap, depending on the `vmode' field) the display using the
+ * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
+ * don't fit, return -EINVAL.
+ */
+static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ if ((info->var.xoffset == var->xoffset) &&
+ (info->var.yoffset == var->yoffset))
+ return 0; /* No change, do nothing */
+
+ if (var->xoffset < 0 || var->yoffset < 0
+ || var->xoffset + info->var.xres > info->var.xres_virtual
+ || var->yoffset + info->var.yres > info->var.yres_virtual)
+ return -EINVAL;
+
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+
+ fsl_diu_set_aoi(info);
+
+ return 0;
+}
+
+static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct mfb_info *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+ struct mfb_chroma_key ck;
+ unsigned char global_alpha;
+ struct aoi_display_offset aoi_d;
+ __u32 pix_fmt;
+ void __user *buf = (void __user *)arg;
+
+ if (!arg)
+ return -EINVAL;
+
+ dev_dbg(info->dev, "ioctl %08x (dir=%s%s type=%u nr=%u size=%u)\n", cmd,
+ _IOC_DIR(cmd) & _IOC_READ ? "R" : "",
+ _IOC_DIR(cmd) & _IOC_WRITE ? "W" : "",
+ _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd));
+
+ switch (cmd) {
+ case MFB_SET_PIXFMT_OLD:
+ dev_warn(info->dev,
+ "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n",
+ MFB_SET_PIXFMT_OLD);
+ case MFB_SET_PIXFMT:
+ if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
+ return -EFAULT;
+ ad->pix_fmt = pix_fmt;
+ break;
+ case MFB_GET_PIXFMT_OLD:
+ dev_warn(info->dev,
+ "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n",
+ MFB_GET_PIXFMT_OLD);
+ case MFB_GET_PIXFMT:
+ pix_fmt = ad->pix_fmt;
+ if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
+ return -EFAULT;
+ break;
+ case MFB_SET_AOID:
+ if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
+ return -EFAULT;
+ mfbi->x_aoi_d = aoi_d.x_aoi_d;
+ mfbi->y_aoi_d = aoi_d.y_aoi_d;
+ fsl_diu_check_var(&info->var, info);
+ fsl_diu_set_aoi(info);
+ break;
+ case MFB_GET_AOID:
+ aoi_d.x_aoi_d = mfbi->x_aoi_d;
+ aoi_d.y_aoi_d = mfbi->y_aoi_d;
+ if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
+ return -EFAULT;
+ break;
+ case MFB_GET_ALPHA:
+ global_alpha = mfbi->g_alpha;
+ if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
+ return -EFAULT;
+ break;
+ case MFB_SET_ALPHA:
+ /* set panel information */
+ if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
+ return -EFAULT;
+ ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
+ (global_alpha & 0xff);
+ mfbi->g_alpha = global_alpha;
+ break;
+ case MFB_SET_CHROMA_KEY:
+ /* set panel winformation */
+ if (copy_from_user(&ck, buf, sizeof(ck)))
+ return -EFAULT;
+
+ if (ck.enable &&
+ (ck.red_max < ck.red_min ||
+ ck.green_max < ck.green_min ||
+ ck.blue_max < ck.blue_min))
+ return -EINVAL;
+
+ if (!ck.enable) {
+ ad->ckmax_r = 0;
+ ad->ckmax_g = 0;
+ ad->ckmax_b = 0;
+ ad->ckmin_r = 255;
+ ad->ckmin_g = 255;
+ ad->ckmin_b = 255;
+ } else {
+ ad->ckmax_r = ck.red_max;
+ ad->ckmax_g = ck.green_max;
+ ad->ckmax_b = ck.blue_max;
+ ad->ckmin_r = ck.red_min;
+ ad->ckmin_g = ck.green_min;
+ ad->ckmin_b = ck.blue_min;
+ }
+ break;
+#ifdef CONFIG_PPC_MPC512x
+ case MFB_SET_GAMMA: {
+ struct fsl_diu_data *data = mfbi->parent;
+
+ if (copy_from_user(data->gamma, buf, sizeof(data->gamma)))
+ return -EFAULT;
+ setbits32(&data->diu_reg->gamma, 0); /* Force table reload */
+ break;
+ }
+ case MFB_GET_GAMMA: {
+ struct fsl_diu_data *data = mfbi->parent;
+
+ if (copy_to_user(buf, data->gamma, sizeof(data->gamma)))
+ return -EFAULT;
+ break;
+ }
+#endif
+ default:
+ dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd);
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data)
+{
+ u32 int_mask = INT_UNDRUN; /* enable underrun detection */
+
+ if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
+ int_mask |= INT_VSYNC; /* enable vertical sync */
+
+ clrbits32(&data->diu_reg->int_mask, int_mask);
+}
+
+/* turn on fb if count == 1
+ */
+static int fsl_diu_open(struct fb_info *info, int user)
+{
+ struct mfb_info *mfbi = info->par;
+ int res = 0;
+
+ /* free boot splash memory on first /dev/fb0 open */
+ if ((mfbi->index == PLANE0) && diu_ops.release_bootmem)
+ diu_ops.release_bootmem();
+
+ spin_lock(&diu_lock);
+ mfbi->count++;
+ if (mfbi->count == 1) {
+ fsl_diu_check_var(&info->var, info);
+ res = fsl_diu_set_par(info);
+ if (res < 0)
+ mfbi->count--;
+ else {
+ fsl_diu_enable_interrupts(mfbi->parent);
+ fsl_diu_enable_panel(info);
+ }
+ }
+
+ spin_unlock(&diu_lock);
+ return res;
+}
+
+/* turn off fb if count == 0
+ */
+static int fsl_diu_release(struct fb_info *info, int user)
+{
+ struct mfb_info *mfbi = info->par;
+ int res = 0;
+
+ spin_lock(&diu_lock);
+ mfbi->count--;
+ if (mfbi->count == 0) {
+ struct fsl_diu_data *data = mfbi->parent;
+ bool disable = true;
+ int i;
+
+ /* Disable interrupts only if all AOIs are closed */
+ for (i = 0; i < NUM_AOIS; i++) {
+ struct mfb_info *mi = data->fsl_diu_info[i].par;
+
+ if (mi->count)
+ disable = false;
+ }
+ if (disable)
+ out_be32(&data->diu_reg->int_mask, 0xffffffff);
+ fsl_diu_disable_panel(info);
+ }
+
+ spin_unlock(&diu_lock);
+ return res;
+}
+
+static struct fb_ops fsl_diu_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = fsl_diu_check_var,
+ .fb_set_par = fsl_diu_set_par,
+ .fb_setcolreg = fsl_diu_setcolreg,
+ .fb_pan_display = fsl_diu_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_ioctl = fsl_diu_ioctl,
+ .fb_open = fsl_diu_open,
+ .fb_release = fsl_diu_release,
+ .fb_cursor = fsl_diu_cursor,
+};
+
+static int install_fb(struct fb_info *info)
+{
+ int rc;
+ struct mfb_info *mfbi = info->par;
+ struct fsl_diu_data *data = mfbi->parent;
+ const char *aoi_mode, *init_aoi_mode = "320x240";
+ struct fb_videomode *db = fsl_diu_mode_db;
+ unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
+ int has_default_mode = 1;
+
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->fbops = &fsl_diu_ops;
+ info->flags = FBINFO_DEFAULT | FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK |
+ FBINFO_READS_FAST;
+ info->pseudo_palette = mfbi->pseudo_palette;
+
+ rc = fb_alloc_cmap(&info->cmap, 16, 0);
+ if (rc)
+ return rc;
+
+ if (mfbi->index == PLANE0) {
+ if (data->has_edid) {
+ /* Now build modedb from EDID */
+ fb_edid_to_monspecs(data->edid_data, &info->monspecs);
+ fb_videomode_to_modelist(info->monspecs.modedb,
+ info->monspecs.modedb_len,
+ &info->modelist);
+ db = info->monspecs.modedb;
+ dbsize = info->monspecs.modedb_len;
+ }
+ aoi_mode = fb_mode;
+ } else {
+ aoi_mode = init_aoi_mode;
+ }
+ rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL,
+ default_bpp);
+ if (!rc) {
+ /*
+ * For plane 0 we continue and look into
+ * driver's internal modedb.
+ */
+ if ((mfbi->index == PLANE0) && data->has_edid)
+ has_default_mode = 0;
+ else
+ return -EINVAL;
+ }
+
+ if (!has_default_mode) {
+ rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
+ ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp);
+ if (rc)
+ has_default_mode = 1;
+ }
+
+ /* Still not found, use preferred mode from database if any */
+ if (!has_default_mode && info->monspecs.modedb) {
+ struct fb_monspecs *specs = &info->monspecs;
+ struct fb_videomode *modedb = &specs->modedb[0];
+
+ /*
+ * Get preferred timing. If not found,
+ * first mode in database will be used.
+ */
+ if (specs->misc & FB_MISC_1ST_DETAIL) {
+ int i;
+
+ for (i = 0; i < specs->modedb_len; i++) {
+ if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+ modedb = &specs->modedb[i];
+ break;
+ }
+ }
+ }
+
+ info->var.bits_per_pixel = default_bpp;
+ fb_videomode_to_var(&info->var, modedb);
+ }
+
+ if (fsl_diu_check_var(&info->var, info)) {
+ dev_err(info->dev, "fsl_diu_check_var failed\n");
+ unmap_video_memory(info);
+ fb_dealloc_cmap(&info->cmap);
+ return -EINVAL;
+ }
+
+ if (register_framebuffer(info) < 0) {
+ dev_err(info->dev, "register_framebuffer failed\n");
+ unmap_video_memory(info);
+ fb_dealloc_cmap(&info->cmap);
+ return -EINVAL;
+ }
+
+ mfbi->registered = 1;
+ dev_info(info->dev, "%s registered successfully\n", mfbi->id);
+
+ return 0;
+}
+
+static void uninstall_fb(struct fb_info *info)
+{
+ struct mfb_info *mfbi = info->par;
+
+ if (!mfbi->registered)
+ return;
+
+ unregister_framebuffer(info);
+ unmap_video_memory(info);
+ if (&info->cmap)
+ fb_dealloc_cmap(&info->cmap);
+
+ mfbi->registered = 0;
+}
+
+static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
+{
+ struct diu __iomem *hw = dev_id;
+ uint32_t status = in_be32(&hw->int_status);
+
+ if (status) {
+ /* This is the workaround for underrun */
+ if (status & INT_UNDRUN) {
+ out_be32(&hw->diu_mode, 0);
+ udelay(1);
+ out_be32(&hw->diu_mode, 1);
+ }
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ else if (status & INT_VSYNC) {
+ unsigned int i;
+
+ for (i = 0; i < coherence_data_size;
+ i += d_cache_line_size)
+ __asm__ __volatile__ (
+ "dcbz 0, %[input]"
+ ::[input]"r"(&coherence_data[i]));
+ }
+#endif
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state)
+{
+ struct fsl_diu_data *data;
+
+ data = dev_get_drvdata(&ofdev->dev);
+ disable_lcdc(data->fsl_diu_info);
+
+ return 0;
+}
+
+static int fsl_diu_resume(struct platform_device *ofdev)
+{
+ struct fsl_diu_data *data;
+
+ data = dev_get_drvdata(&ofdev->dev);
+ enable_lcdc(data->fsl_diu_info);
+
+ return 0;
+}
+
+#else
+#define fsl_diu_suspend NULL
+#define fsl_diu_resume NULL
+#endif /* CONFIG_PM */
+
+static ssize_t store_monitor(struct device *device,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ enum fsl_diu_monitor_port old_monitor_port;
+ struct fsl_diu_data *data =
+ container_of(attr, struct fsl_diu_data, dev_attr);
+
+ old_monitor_port = data->monitor_port;
+ data->monitor_port = fsl_diu_name_to_port(buf);
+
+ if (old_monitor_port != data->monitor_port) {
+ /* All AOIs need adjust pixel format
+ * fsl_diu_set_par only change the pixsel format here
+ * unlikely to fail. */
+ unsigned int i;
+
+ for (i=0; i < NUM_AOIS; i++)
+ fsl_diu_set_par(&data->fsl_diu_info[i]);
+ }
+ return count;
+}
+
+static ssize_t show_monitor(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct fsl_diu_data *data =
+ container_of(attr, struct fsl_diu_data, dev_attr);
+
+ switch (data->monitor_port) {
+ case FSL_DIU_PORT_DVI:
+ return sprintf(buf, "DVI\n");
+ case FSL_DIU_PORT_LVDS:
+ return sprintf(buf, "Single-link LVDS\n");
+ case FSL_DIU_PORT_DLVDS:
+ return sprintf(buf, "Dual-link LVDS\n");
+ }
+
+ return 0;
+}
+
+static int fsl_diu_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mfb_info *mfbi;
+ struct fsl_diu_data *data;
+ dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */
+ const void *prop;
+ unsigned int i;
+ int ret;
+
+ data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data),
+ &dma_addr, GFP_DMA | __GFP_ZERO);
+ if (!data)
+ return -ENOMEM;
+ data->dma_addr = dma_addr;
+
+ /*
+ * dma_alloc_coherent() uses a page allocator, so the address is
+ * always page-aligned. We need the memory to be 32-byte aligned,
+ * so that's good. However, if one day the allocator changes, we
+ * need to catch that. It's not worth the effort to handle unaligned
+ * alloctions now because it's highly unlikely to ever be a problem.
+ */
+ if ((unsigned long)data & 31) {
+ dev_err(&pdev->dev, "misaligned allocation");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ spin_lock_init(&data->reg_lock);
+
+ for (i = 0; i < NUM_AOIS; i++) {
+ struct fb_info *info = &data->fsl_diu_info[i];
+
+ info->device = &pdev->dev;
+ info->par = &data->mfb[i];
+
+ /*
+ * We store the physical address of the AD in the reserved
+ * 'paddr' field of the AD itself.
+ */
+ data->ad[i].paddr = DMA_ADDR(data, ad[i]);
+
+ info->fix.smem_start = 0;
+
+ /* Initialize the AOI data structure */
+ mfbi = info->par;
+ memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
+ mfbi->parent = data;
+ mfbi->ad = &data->ad[i];
+ }
+
+ /* Get the EDID data from the device tree, if present */
+ prop = of_get_property(np, "edid", &ret);
+ if (prop && ret == EDID_LENGTH) {
+ memcpy(data->edid_data, prop, EDID_LENGTH);
+ data->has_edid = true;
+ }
+
+ data->diu_reg = of_iomap(np, 0);
+ if (!data->diu_reg) {
+ dev_err(&pdev->dev, "cannot map DIU registers\n");
+ ret = -EFAULT;
+ goto error;
+ }
+
+ /* Get the IRQ of the DIU */
+ data->irq = irq_of_parse_and_map(np, 0);
+
+ if (!data->irq) {
+ dev_err(&pdev->dev, "could not get DIU IRQ\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ data->monitor_port = monitor_port;
+
+ /* Initialize the dummy Area Descriptor */
+ data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi));
+ data->dummy_ad.pix_fmt = 0x88882317;
+ data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
+ data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) | 2);
+ data->dummy_ad.offset_xyi = 0;
+ data->dummy_ad.offset_xyd = 0;
+ data->dummy_ad.next_ad = 0;
+ data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad);
+
+ /*
+ * Let DIU continue to display splash screen if it was pre-initialized
+ * by the bootloader; otherwise, clear the display.
+ */
+ if (in_be32(&data->diu_reg->diu_mode) == MFB_MODE0)
+ out_be32(&data->diu_reg->desc[0], 0);
+
+ out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr);
+ out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr);
+
+ /*
+ * Older versions of U-Boot leave interrupts enabled, so disable
+ * all of them and clear the status register.
+ */
+ out_be32(&data->diu_reg->int_mask, 0xffffffff);
+ in_be32(&data->diu_reg->int_status);
+
+ ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb",
+ data->diu_reg);
+ if (ret) {
+ dev_err(&pdev->dev, "could not claim irq\n");
+ goto error;
+ }
+
+ for (i = 0; i < NUM_AOIS; i++) {
+ ret = install_fb(&data->fsl_diu_info[i]);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register fb %d\n", i);
+ free_irq(data->irq, data->diu_reg);
+ goto error;
+ }
+ }
+
+ sysfs_attr_init(&data->dev_attr.attr);
+ data->dev_attr.attr.name = "monitor";
+ data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
+ data->dev_attr.show = show_monitor;
+ data->dev_attr.store = store_monitor;
+ ret = device_create_file(&pdev->dev, &data->dev_attr);
+ if (ret) {
+ dev_err(&pdev->dev, "could not create sysfs file %s\n",
+ data->dev_attr.attr.name);
+ }
+
+ dev_set_drvdata(&pdev->dev, data);
+ return 0;
+
+error:
+ for (i = 0; i < NUM_AOIS; i++)
+ uninstall_fb(&data->fsl_diu_info[i]);
+
+ iounmap(data->diu_reg);
+
+ return ret;
+}
+
+static int fsl_diu_remove(struct platform_device *pdev)
+{
+ struct fsl_diu_data *data;
+ int i;
+
+ data = dev_get_drvdata(&pdev->dev);
+ disable_lcdc(&data->fsl_diu_info[0]);
+
+ free_irq(data->irq, data->diu_reg);
+
+ for (i = 0; i < NUM_AOIS; i++)
+ uninstall_fb(&data->fsl_diu_info[i]);
+
+ iounmap(data->diu_reg);
+
+ return 0;
+}
+
+#ifndef MODULE
+static int __init fsl_diu_setup(char *options)
+{
+ char *opt;
+ unsigned long val;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ if (!strncmp(opt, "monitor=", 8)) {
+ monitor_port = fsl_diu_name_to_port(opt + 8);
+ } else if (!strncmp(opt, "bpp=", 4)) {
+ if (!kstrtoul(opt + 4, 10, &val))
+ default_bpp = val;
+ } else
+ fb_mode = opt;
+ }
+
+ return 0;
+}
+#endif
+
+static struct of_device_id fsl_diu_match[] = {
+#ifdef CONFIG_PPC_MPC512x
+ {
+ .compatible = "fsl,mpc5121-diu",
+ },
+#endif
+ {
+ .compatible = "fsl,diu",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_diu_match);
+
+static struct platform_driver fsl_diu_driver = {
+ .driver = {
+ .name = "fsl-diu-fb",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_diu_match,
+ },
+ .probe = fsl_diu_probe,
+ .remove = fsl_diu_remove,
+ .suspend = fsl_diu_suspend,
+ .resume = fsl_diu_resume,
+};
+
+static int __init fsl_diu_init(void)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ struct device_node *np;
+ const u32 *prop;
+#endif
+ int ret;
+#ifndef MODULE
+ char *option;
+
+ /*
+ * For kernel boot options (in 'video=xxxfb:<options>' format)
+ */
+ if (fb_get_options("fslfb", &option))
+ return -ENODEV;
+ fsl_diu_setup(option);
+#else
+ monitor_port = fsl_diu_name_to_port(monitor_string);
+#endif
+ pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ np = of_find_node_by_type(NULL, "cpu");
+ if (!np) {
+ pr_err("fsl-diu-fb: can't find 'cpu' device node\n");
+ return -ENODEV;
+ }
+
+ prop = of_get_property(np, "d-cache-size", NULL);
+ if (prop == NULL) {
+ pr_err("fsl-diu-fb: missing 'd-cache-size' property' "
+ "in 'cpu' node\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ /*
+ * Freescale PLRU requires 13/8 times the cache size to do a proper
+ * displacement flush
+ */
+ coherence_data_size = be32_to_cpup(prop) * 13;
+ coherence_data_size /= 8;
+
+ pr_debug("fsl-diu-fb: coherence data size is %zu bytes\n",
+ coherence_data_size);
+
+ prop = of_get_property(np, "d-cache-line-size", NULL);
+ if (prop == NULL) {
+ pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' "
+ "in 'cpu' node\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+ d_cache_line_size = be32_to_cpup(prop);
+
+ pr_debug("fsl-diu-fb: cache lines size is %u bytes\n",
+ d_cache_line_size);
+
+ of_node_put(np);
+ coherence_data = vmalloc(coherence_data_size);
+ if (!coherence_data) {
+ pr_err("fsl-diu-fb: could not allocate coherence data "
+ "(size=%zu)\n", coherence_data_size);
+ return -ENOMEM;
+ }
+
+#endif
+
+ ret = platform_driver_register(&fsl_diu_driver);
+ if (ret) {
+ pr_err("fsl-diu-fb: failed to register platform driver\n");
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ vfree(coherence_data);
+#endif
+ }
+ return ret;
+}
+
+static void __exit fsl_diu_exit(void)
+{
+ platform_driver_unregister(&fsl_diu_driver);
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ vfree(coherence_data);
+#endif
+}
+
+module_init(fsl_diu_init);
+module_exit(fsl_diu_exit);
+
+MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
+MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
+MODULE_LICENSE("GPL");
+
+module_param_named(mode, fb_mode, charp, 0);
+MODULE_PARM_DESC(mode,
+ "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+module_param_named(bpp, default_bpp, ulong, 0);
+MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'");
+module_param_named(monitor, monitor_string, charp, 0);
+MODULE_PARM_DESC(monitor, "Specify the monitor port "
+ "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-26 13:23:23 +0000