aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig53
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/spi-altera.c46
-rw-r--r--drivers/spi/spi-atmel.c36
-rw-r--r--drivers/spi/spi-bcm2835.c10
-rw-r--r--drivers/spi/spi-bcm63xx.c8
-rw-r--r--drivers/spi/spi-bfin-v3.c965
-rw-r--r--drivers/spi/spi-bitbang.c260
-rw-r--r--drivers/spi/spi-clps711x.c6
-rw-r--r--drivers/spi/spi-efm32.c516
-rw-r--r--drivers/spi/spi-ep93xx.c353
-rw-r--r--drivers/spi/spi-fsl-dspi.c557
-rw-r--r--drivers/spi/spi-imx.c76
-rw-r--r--drivers/spi/spi-mpc512x-psc.c48
-rw-r--r--drivers/spi/spi-mxs.c28
-rw-r--r--drivers/spi/spi-nuc900.c13
-rw-r--r--drivers/spi/spi-oc-tiny.c22
-rw-r--r--drivers/spi/spi-orion.c1
-rw-r--r--drivers/spi/spi-xilinx.c16
-rw-r--r--drivers/spi/spi.c24
20 files changed, 2405 insertions, 636 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 89cbbabaff44..8aad2c1dc33d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -70,14 +70,14 @@ config SPI_ATH79
config SPI_ATMEL
tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32)
+ depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
help
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
config SPI_BCM2835
tristate "BCM2835 SPI controller"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 || COMPILE_TEST
help
This selects a driver for the Broadcom BCM2835 SPI master.
@@ -88,10 +88,17 @@ config SPI_BCM2835
config SPI_BFIN5XX
tristate "SPI controller driver for ADI Blackfin5xx"
- depends on BLACKFIN
+ depends on BLACKFIN && !BF60x
help
This is the SPI controller master driver for Blackfin 5xx processor.
+config SPI_BFIN_V3
+ tristate "SPI controller v3 for Blackfin"
+ depends on BF60x
+ help
+ This is the SPI controller v3 master driver
+ found on Blackfin 60x processor.
+
config SPI_BFIN_SPORT
tristate "SPI bus via Blackfin SPORT"
depends on BLACKFIN
@@ -151,15 +158,22 @@ config SPI_COLDFIRE_QSPI
config SPI_DAVINCI
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
select SPI_BITBANG
select TI_EDMA
help
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
+config SPI_EFM32
+ tristate "EFM32 SPI controller"
+ depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
+ select SPI_BITBANG
+ help
+ Driver for the spi controller found on Energy Micro's EFM32 SoCs.
+
config SPI_EP93XX
tristate "Cirrus Logic EP93xx SPI controller"
- depends on ARCH_EP93XX
+ depends on ARCH_EP93XX || COMPILE_TEST
help
This enables using the Cirrus EP93xx SPI controller in master
mode.
@@ -191,7 +205,7 @@ config SPI_GPIO
config SPI_IMX
tristate "Freescale i.MX SPI controllers"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
select SPI_BITBANG
default m if IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -248,6 +262,13 @@ config SPI_FSL_SPI
This also enables using the Aeroflex Gaisler GRLIB SPI controller in
master mode.
+config SPI_FSL_DSPI
+ tristate "Freescale DSPI controller"
+ select SPI_BITBANG
+ help
+ This enables support for the Freescale DSPI controller in master
+ mode. VF610 platform uses the controller.
+
config SPI_FSL_ESPI
bool "Freescale eSPI controller"
depends on FSL_SOC
@@ -280,20 +301,20 @@ config SPI_OMAP_UWIRE
config SPI_OMAP24XX
tristate "McSPI driver for OMAP"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
SPI master controller for OMAP24XX and later Multichannel SPI
(McSPI) modules.
config SPI_OMAP_100K
tristate "OMAP SPI 100K"
- depends on ARCH_OMAP850 || ARCH_OMAP730
+ depends on ARCH_OMAP850 || ARCH_OMAP730 || COMPILE_TEST
help
OMAP SPI 100K master controller for omap7xx boards.
config SPI_ORION
tristate "Orion SPI master"
- depends on PLAT_ORION
+ depends on PLAT_ORION || COMPILE_TEST
help
This enables using the SPI master controller on the Orion chips.
@@ -341,7 +362,7 @@ config SPI_PXA2XX_PCI
config SPI_RSPI
tristate "Renesas RSPI controller"
- depends on SUPERH
+ depends on SUPERH && SH_DMAE_BASE
help
SPI driver for Renesas RSPI blocks.
@@ -385,7 +406,7 @@ config SPI_SH_MSIOF
config SPI_SH
tristate "SuperH SPI controller"
- depends on SUPERH
+ depends on SUPERH || COMPILE_TEST
help
SPI driver for SuperH SPI blocks.
@@ -398,7 +419,7 @@ config SPI_SH_SCI
config SPI_SH_HSPI
tristate "SuperH HSPI controller"
- depends on ARCH_SHMOBILE
+ depends on ARCH_SHMOBILE || COMPILE_TEST
help
SPI driver for SuperH HSPI blocks.
@@ -418,7 +439,7 @@ config SPI_MXS
config SPI_TEGRA114
tristate "NVIDIA Tegra114 SPI Controller"
- depends on ARCH_TEGRA && TEGRA20_APB_DMA
+ depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
help
SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
is different than the older SoCs SPI controller and also register interface
@@ -426,7 +447,7 @@ config SPI_TEGRA114
config SPI_TEGRA20_SFLASH
tristate "Nvidia Tegra20 Serial flash Controller"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || COMPILE_TEST
help
SPI driver for Nvidia Tegra20 Serial flash Controller interface.
The main usecase of this controller is to use spi flash as boot
@@ -434,7 +455,7 @@ config SPI_TEGRA20_SFLASH
config SPI_TEGRA20_SLINK
tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
- depends on ARCH_TEGRA && TEGRA20_APB_DMA
+ depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
help
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
@@ -457,7 +478,7 @@ config SPI_TOPCLIFF_PCH
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
- depends on GPIOLIB && CPU_TX49XX
+ depends on GPIOLIB && (CPU_TX49XX || COMPILE_TEST)
help
SPI driver for Toshiba TXx9 MIPS SoCs
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 33f9c09561e7..985d7bad7932 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
+obj-$(CONFIG_SPI_BFIN_V3) += spi-bfin-v3.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
@@ -27,9 +28,11 @@ obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o
spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o
+obj-$(CONFIG_SPI_EFM32) += spi-efm32.o
obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
obj-$(CONFIG_SPI_FSL_CPM) += spi-fsl-cpm.o
+obj-$(CONFIG_SPI_FSL_DSPI) += spi-fsl-dspi.o
obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o
obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 81b9adb6e766..156eb888655e 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -103,16 +103,6 @@ static void altera_spi_chipsel(struct spi_device *spi, int value)
}
}
-static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
-{
- return 0;
-}
-
-static int altera_spi_setup(struct spi_device *spi)
-{
- return 0;
-}
-
static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
{
if (hw->tx) {
@@ -134,7 +124,7 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
hw->tx = t->tx_buf;
hw->rx = t->rx_buf;
hw->count = 0;
- hw->bytes_per_word = t->bits_per_word / 8;
+ hw->bytes_per_word = DIV_ROUND_UP(t->bits_per_word, 8);
hw->len = t->len / hw->bytes_per_word;
if (hw->irq >= 0) {
@@ -150,12 +140,12 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK;
writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
} else {
- /* send the first byte */
- writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA);
-
- while (1) {
+ while (hw->count < hw->len) {
unsigned int rxd;
+ writel(hw_txbyte(hw, hw->count),
+ hw->base + ALTERA_SPI_TXDATA);
+
while (!(readl(hw->base + ALTERA_SPI_STATUS) &
ALTERA_SPI_STATUS_RRDY_MSK))
cpu_relax();
@@ -174,14 +164,7 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
}
hw->count++;
-
- if (hw->count < hw->len)
- writel(hw_txbyte(hw, hw->count),
- hw->base + ALTERA_SPI_TXDATA);
- else
- break;
}
-
}
return hw->count * hw->bytes_per_word;
@@ -231,7 +214,6 @@ static int altera_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = 16;
master->mode_bits = SPI_CS_HIGH;
- master->setup = altera_spi_setup;
hw = spi_master_get_devdata(master);
platform_set_drvdata(pdev, hw);
@@ -240,21 +222,16 @@ static int altera_spi_probe(struct platform_device *pdev)
hw->bitbang.master = spi_master_get(master);
if (!hw->bitbang.master)
return err;
- hw->bitbang.setup_transfer = altera_spi_setupxfer;
hw->bitbang.chipselect = altera_spi_chipsel;
hw->bitbang.txrx_bufs = altera_spi_txrx;
/* find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- goto exit_busy;
- if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
- pdev->name))
- goto exit_busy;
- hw->base = devm_ioremap_nocache(&pdev->dev, res->start,
- resource_size(res));
- if (!hw->base)
- goto exit_busy;
+ hw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(hw->base)) {
+ err = PTR_ERR(hw->base);
+ goto exit;
+ }
/* program defaults into the registers */
hw->imr = 0; /* disable spi interrupts */
writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
@@ -281,9 +258,6 @@ static int altera_spi_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq);
return 0;
-
-exit_busy:
- err = -EBUSY;
exit:
spi_master_put(master);
return err;
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index ea1ec009f44d..fd7cc566095a 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -360,12 +360,12 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
gpio_set_value(asd->npcs_pin, !active);
}
-static void atmel_spi_lock(struct atmel_spi *as)
+static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
{
spin_lock_irqsave(&as->lock, as->flags);
}
-static void atmel_spi_unlock(struct atmel_spi *as)
+static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
{
spin_unlock_irqrestore(&as->lock, as->flags);
}
@@ -629,9 +629,9 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
goto err_dma;
dev_dbg(master->dev.parent,
- " start dma xfer %p: len %u tx %p/%08x rx %p/%08x\n",
- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
- xfer->rx_buf, xfer->rx_dma);
+ " start dma xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
+ xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma,
+ xfer->rx_buf, (unsigned long long)xfer->rx_dma);
/* Enable relevant interrupts */
spi_writel(as, IER, SPI_BIT(OVRES));
@@ -732,9 +732,10 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
spi_writel(as, TCR, len);
dev_dbg(&msg->spi->dev,
- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
- xfer->rx_buf, xfer->rx_dma);
+ " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
+ xfer, xfer->len, xfer->tx_buf,
+ (unsigned long long)xfer->tx_dma, xfer->rx_buf,
+ (unsigned long long)xfer->rx_dma);
} else {
xfer = as->next_transfer;
remaining = as->next_remaining_bytes;
@@ -771,9 +772,10 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
spi_writel(as, TNCR, len);
dev_dbg(&msg->spi->dev,
- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
- xfer->rx_buf, xfer->rx_dma);
+ " next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
+ xfer, xfer->len, xfer->tx_buf,
+ (unsigned long long)xfer->tx_dma, xfer->rx_buf,
+ (unsigned long long)xfer->rx_dma);
ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES);
} else {
spi_writel(as, RNCR, 0);
@@ -1579,7 +1581,9 @@ static int atmel_spi_probe(struct platform_device *pdev)
goto out_unmap_regs;
/* Initialize the hardware */
- clk_enable(clk);
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out_unmap_regs;
spi_writel(as, CR, SPI_BIT(SWRST));
spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
if (as->caps.has_wdrbt) {
@@ -1609,7 +1613,7 @@ out_free_dma:
spi_writel(as, CR, SPI_BIT(SWRST));
spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
- clk_disable(clk);
+ clk_disable_unprepare(clk);
free_irq(irq, master);
out_unmap_regs:
iounmap(as->regs);
@@ -1661,7 +1665,7 @@ static int atmel_spi_remove(struct platform_device *pdev)
dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
as->buffer_dma);
- clk_disable(as->clk);
+ clk_disable_unprepare(as->clk);
clk_put(as->clk);
free_irq(as->irq, master);
iounmap(as->regs);
@@ -1678,7 +1682,7 @@ static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
struct spi_master *master = platform_get_drvdata(pdev);
struct atmel_spi *as = spi_master_get_devdata(master);
- clk_disable(as->clk);
+ clk_disable_unprepare(as->clk);
return 0;
}
@@ -1687,7 +1691,7 @@ static int atmel_spi_resume(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct atmel_spi *as = spi_master_get_devdata(master);
- clk_enable(as->clk);
+ return clk_prepare_enable(as->clk);
return 0;
}
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index a4185e492321..52c81481c5c7 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -314,7 +314,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
master->mode_bits = BCM2835_SPI_MODE_BITS;
- master->bits_per_word_mask = BIT(8 - 1);
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
master->bus_num = -1;
master->num_chipselect = 3;
master->transfer_one_message = bcm2835_spi_transfer_one;
@@ -325,12 +325,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
init_completion(&bs->done);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "could not get memory resource\n");
- err = -ENODEV;
- goto out_master_put;
- }
-
bs->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(bs->regs)) {
err = PTR_ERR(bs->regs);
@@ -383,7 +377,7 @@ out_master_put:
static int bcm2835_spi_remove(struct platform_device *pdev)
{
- struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct bcm2835_spi *bs = spi_master_get_devdata(master);
free_irq(bs->irq, master);
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 9fd7a39b8029..a21fef4a3bb1 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -360,13 +360,6 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
struct bcm63xx_spi *bs;
int ret;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
- dev_err(dev, "no iomem\n");
- ret = -ENXIO;
- goto out;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "no irq\n");
@@ -393,6 +386,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
bs->pdev = pdev;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bs->regs = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(bs->regs)) {
ret = PTR_ERR(bs->regs);
diff --git a/drivers/spi/spi-bfin-v3.c b/drivers/spi/spi-bfin-v3.c
new file mode 100644
index 000000000000..e4394ebf08f3
--- /dev/null
+++ b/drivers/spi/spi-bfin-v3.c
@@ -0,0 +1,965 @@
+/*
+ * Analog Devices SPI3 controller driver
+ *
+ * Copyright (c) 2013 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+#include <asm/bfin_spi3.h>
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+enum bfin_spi_state {
+ START_STATE,
+ RUNNING_STATE,
+ DONE_STATE,
+ ERROR_STATE
+};
+
+struct bfin_spi_master;
+
+struct bfin_spi_transfer_ops {
+ void (*write) (struct bfin_spi_master *);
+ void (*read) (struct bfin_spi_master *);
+ void (*duplex) (struct bfin_spi_master *);
+};
+
+/* runtime info for spi master */
+struct bfin_spi_master {
+ /* SPI framework hookup */
+ struct spi_master *master;
+
+ /* Regs base of SPI controller */
+ struct bfin_spi_regs __iomem *regs;
+
+ /* Pin request list */
+ u16 *pin_req;
+
+ /* Message Transfer pump */
+ struct tasklet_struct pump_transfers;
+
+ /* Current message transfer state info */
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct bfin_spi_device *cur_chip;
+ unsigned transfer_len;
+
+ /* transfer buffer */
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+
+ /* dma info */
+ unsigned int tx_dma;
+ unsigned int rx_dma;
+ dma_addr_t tx_dma_addr;
+ dma_addr_t rx_dma_addr;
+ unsigned long dummy_buffer; /* used in unidirectional transfer */
+ unsigned long tx_dma_size;
+ unsigned long rx_dma_size;
+ int tx_num;
+ int rx_num;
+
+ /* store register value for suspend/resume */
+ u32 control;
+ u32 ssel;
+
+ unsigned long sclk;
+ enum bfin_spi_state state;
+
+ const struct bfin_spi_transfer_ops *ops;
+};
+
+struct bfin_spi_device {
+ u32 control;
+ u32 clock;
+ u32 ssel;
+
+ u8 cs;
+ u16 cs_chg_udelay; /* Some devices require > 255usec delay */
+ u32 cs_gpio;
+ u32 tx_dummy_val; /* tx value for rx only transfer */
+ bool enable_dma;
+ const struct bfin_spi_transfer_ops *ops;
+};
+
+static void bfin_spi_enable(struct bfin_spi_master *drv_data)
+{
+ bfin_write_or(&drv_data->regs->control, SPI_CTL_EN);
+}
+
+static void bfin_spi_disable(struct bfin_spi_master *drv_data)
+{
+ bfin_write_and(&drv_data->regs->control, ~SPI_CTL_EN);
+}
+
+/* Caculate the SPI_CLOCK register value based on input HZ */
+static u32 hz_to_spi_clock(u32 sclk, u32 speed_hz)
+{
+ u32 spi_clock = sclk / speed_hz;
+
+ if (spi_clock)
+ spi_clock--;
+ return spi_clock;
+}
+
+static int bfin_spi_flush(struct bfin_spi_master *drv_data)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ /* wait for stop and clear stat */
+ while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit)
+ cpu_relax();
+
+ bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
+
+ return limit;
+}
+
+/* Chip select operation functions for cs_change flag */
+static void bfin_spi_cs_active(struct bfin_spi_master *drv_data, struct bfin_spi_device *chip)
+{
+ if (likely(chip->cs < MAX_CTRL_CS))
+ bfin_write_and(&drv_data->regs->ssel, ~chip->ssel);
+ else
+ gpio_set_value(chip->cs_gpio, 0);
+}
+
+static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data,
+ struct bfin_spi_device *chip)
+{
+ if (likely(chip->cs < MAX_CTRL_CS))
+ bfin_write_or(&drv_data->regs->ssel, chip->ssel);
+ else
+ gpio_set_value(chip->cs_gpio, 1);
+
+ /* Move delay here for consistency */
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+}
+
+/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
+static inline void bfin_spi_cs_enable(struct bfin_spi_master *drv_data,
+ struct bfin_spi_device *chip)
+{
+ if (chip->cs < MAX_CTRL_CS)
+ bfin_write_or(&drv_data->regs->ssel, chip->ssel >> 8);
+}
+
+static inline void bfin_spi_cs_disable(struct bfin_spi_master *drv_data,
+ struct bfin_spi_device *chip)
+{
+ if (chip->cs < MAX_CTRL_CS)
+ bfin_write_and(&drv_data->regs->ssel, ~(chip->ssel >> 8));
+}
+
+/* stop controller and re-config current chip*/
+static void bfin_spi_restore_state(struct bfin_spi_master *drv_data)
+{
+ struct bfin_spi_device *chip = drv_data->cur_chip;
+
+ /* Clear status and disable clock */
+ bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
+ bfin_write(&drv_data->regs->rx_control, 0x0);
+ bfin_write(&drv_data->regs->tx_control, 0x0);
+ bfin_spi_disable(drv_data);
+
+ SSYNC();
+
+ /* Load the registers */
+ bfin_write(&drv_data->regs->control, chip->control);
+ bfin_write(&drv_data->regs->clock, chip->clock);
+
+ bfin_spi_enable(drv_data);
+ drv_data->tx_num = drv_data->rx_num = 0;
+ /* we always choose tx transfer initiate */
+ bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN);
+ bfin_write(&drv_data->regs->tx_control,
+ SPI_TXCTL_TEN | SPI_TXCTL_TTI);
+ bfin_spi_cs_active(drv_data, chip);
+}
+
+/* discard invalid rx data and empty rfifo */
+static inline void dummy_read(struct bfin_spi_master *drv_data)
+{
+ while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_RFE))
+ bfin_read(&drv_data->regs->rfifo);
+}
+
+static void bfin_spi_u8_write(struct bfin_spi_master *drv_data)
+{
+ dummy_read(drv_data);
+ while (drv_data->tx < drv_data->tx_end) {
+ bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++)));
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ bfin_read(&drv_data->regs->rfifo);
+ }
+}
+
+static void bfin_spi_u8_read(struct bfin_spi_master *drv_data)
+{
+ u32 tx_val = drv_data->cur_chip->tx_dummy_val;
+
+ dummy_read(drv_data);
+ while (drv_data->rx < drv_data->rx_end) {
+ bfin_write(&drv_data->regs->tfifo, tx_val);
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo);
+ }
+}
+
+static void bfin_spi_u8_duplex(struct bfin_spi_master *drv_data)
+{
+ dummy_read(drv_data);
+ while (drv_data->rx < drv_data->rx_end) {
+ bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++)));
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo);
+ }
+}
+
+static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = {
+ .write = bfin_spi_u8_write,
+ .read = bfin_spi_u8_read,
+ .duplex = bfin_spi_u8_duplex,
+};
+
+static void bfin_spi_u16_write(struct bfin_spi_master *drv_data)
+{
+ dummy_read(drv_data);
+ while (drv_data->tx < drv_data->tx_end) {
+ bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx));
+ drv_data->tx += 2;
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ bfin_read(&drv_data->regs->rfifo);
+ }
+}
+
+static void bfin_spi_u16_read(struct bfin_spi_master *drv_data)
+{
+ u32 tx_val = drv_data->cur_chip->tx_dummy_val;
+
+ dummy_read(drv_data);
+ while (drv_data->rx < drv_data->rx_end) {
+ bfin_write(&drv_data->regs->tfifo, tx_val);
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ drv_data->rx += 2;
+ }
+}
+
+static void bfin_spi_u16_duplex(struct bfin_spi_master *drv_data)
+{
+ dummy_read(drv_data);
+ while (drv_data->rx < drv_data->rx_end) {
+ bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx));
+ drv_data->tx += 2;
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ drv_data->rx += 2;
+ }
+}
+
+static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = {
+ .write = bfin_spi_u16_write,
+ .read = bfin_spi_u16_read,
+ .duplex = bfin_spi_u16_duplex,
+};
+
+static void bfin_spi_u32_write(struct bfin_spi_master *drv_data)
+{
+ dummy_read(drv_data);
+ while (drv_data->tx < drv_data->tx_end) {
+ bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx));
+ drv_data->tx += 4;
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ bfin_read(&drv_data->regs->rfifo);
+ }
+}
+
+static void bfin_spi_u32_read(struct bfin_spi_master *drv_data)
+{
+ u32 tx_val = drv_data->cur_chip->tx_dummy_val;
+
+ dummy_read(drv_data);
+ while (drv_data->rx < drv_data->rx_end) {
+ bfin_write(&drv_data->regs->tfifo, tx_val);
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ drv_data->rx += 4;
+ }
+}
+
+static void bfin_spi_u32_duplex(struct bfin_spi_master *drv_data)
+{
+ dummy_read(drv_data);
+ while (drv_data->rx < drv_data->rx_end) {
+ bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx));
+ drv_data->tx += 4;
+ while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ cpu_relax();
+ *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ drv_data->rx += 4;
+ }
+}
+
+static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u32 = {
+ .write = bfin_spi_u32_write,
+ .read = bfin_spi_u32_read,
+ .duplex = bfin_spi_u32_duplex,
+};
+
+
+/* test if there is more transfer to be done */
+static void bfin_spi_next_transfer(struct bfin_spi_master *drv)
+{
+ struct spi_message *msg = drv->cur_msg;
+ struct spi_transfer *t = drv->cur_transfer;
+
+ /* Move to next transfer */
+ if (t->transfer_list.next != &msg->transfers) {
+ drv->cur_transfer = list_entry(t->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ drv->state = RUNNING_STATE;
+ } else {
+ drv->state = DONE_STATE;
+ drv->cur_transfer = NULL;
+ }
+}
+
+static void bfin_spi_giveback(struct bfin_spi_master *drv_data)
+{
+ struct bfin_spi_device *chip = drv_data->cur_chip;
+
+ bfin_spi_cs_deactive(drv_data, chip);
+ spi_finalize_current_message(drv_data->master);
+}
+
+static int bfin_spi_setup_transfer(struct bfin_spi_master *drv)
+{
+ struct spi_transfer *t = drv->cur_transfer;
+ u32 cr, cr_width;
+
+ if (t->tx_buf) {
+ drv->tx = (void *)t->tx_buf;
+ drv->tx_end = drv->tx + t->len;
+ } else {
+ drv->tx = NULL;
+ }
+
+ if (t->rx_buf) {
+ drv->rx = t->rx_buf;
+ drv->rx_end = drv->rx + t->len;
+ } else {
+ drv->rx = NULL;
+ }
+
+ drv->transfer_len = t->len;
+
+ /* bits per word setup */
+ switch (t->bits_per_word) {
+ case 8:
+ cr_width = SPI_CTL_SIZE08;
+ drv->ops = &bfin_bfin_spi_transfer_ops_u8;
+ break;
+ case 16:
+ cr_width = SPI_CTL_SIZE16;
+ drv->ops = &bfin_bfin_spi_transfer_ops_u16;
+ break;
+ case 32:
+ cr_width = SPI_CTL_SIZE32;
+ drv->ops = &bfin_bfin_spi_transfer_ops_u32;
+ break;
+ default:
+ return -EINVAL;
+ }
+ cr = bfin_read(&drv->regs->control) & ~SPI_CTL_SIZE;
+ cr |= cr_width;
+ bfin_write(&drv->regs->control, cr);
+
+ /* speed setup */
+ bfin_write(&drv->regs->clock,
+ hz_to_spi_clock(drv->sclk, t->speed_hz));
+ return 0;
+}
+
+static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data)
+{
+ struct spi_transfer *t = drv_data->cur_transfer;
+ struct spi_message *msg = drv_data->cur_msg;
+ struct bfin_spi_device *chip = drv_data->cur_chip;
+ u32 dma_config;
+ unsigned long word_count, word_size;
+ void *tx_buf, *rx_buf;
+
+ switch (t->bits_per_word) {
+ case 8:
+ dma_config = WDSIZE_8 | PSIZE_8;
+ word_count = drv_data->transfer_len;
+ word_size = 1;
+ break;
+ case 16:
+ dma_config = WDSIZE_16 | PSIZE_16;
+ word_count = drv_data->transfer_len / 2;
+ word_size = 2;
+ break;
+ default:
+ dma_config = WDSIZE_32 | PSIZE_32;
+ word_count = drv_data->transfer_len / 4;
+ word_size = 4;
+ break;
+ }
+
+ if (!drv_data->rx) {
+ tx_buf = drv_data->tx;
+ rx_buf = &drv_data->dummy_buffer;
+ drv_data->tx_dma_size = drv_data->transfer_len;
+ drv_data->rx_dma_size = sizeof(drv_data->dummy_buffer);
+ set_dma_x_modify(drv_data->tx_dma, word_size);
+ set_dma_x_modify(drv_data->rx_dma, 0);
+ } else if (!drv_data->tx) {
+ drv_data->dummy_buffer = chip->tx_dummy_val;
+ tx_buf = &drv_data->dummy_buffer;
+ rx_buf = drv_data->rx;
+ drv_data->tx_dma_size = sizeof(drv_data->dummy_buffer);
+ drv_data->rx_dma_size = drv_data->transfer_len;
+ set_dma_x_modify(drv_data->tx_dma, 0);
+ set_dma_x_modify(drv_data->rx_dma, word_size);
+ } else {
+ tx_buf = drv_data->tx;
+ rx_buf = drv_data->rx;
+ drv_data->tx_dma_size = drv_data->rx_dma_size
+ = drv_data->transfer_len;
+ set_dma_x_modify(drv_data->tx_dma, word_size);
+ set_dma_x_modify(drv_data->rx_dma, word_size);
+ }
+
+ drv_data->tx_dma_addr = dma_map_single(&msg->spi->dev,
+ (void *)tx_buf,
+ drv_data->tx_dma_size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&msg->spi->dev,
+ drv_data->tx_dma_addr))
+ return -ENOMEM;
+
+ drv_data->rx_dma_addr = dma_map_single(&msg->spi->dev,
+ (void *)rx_buf,
+ drv_data->rx_dma_size,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&msg->spi->dev,
+ drv_data->rx_dma_addr)) {
+ dma_unmap_single(&msg->spi->dev,
+ drv_data->tx_dma_addr,
+ drv_data->tx_dma_size,
+ DMA_TO_DEVICE);
+ return -ENOMEM;
+ }
+
+ dummy_read(drv_data);
+ set_dma_x_count(drv_data->tx_dma, word_count);
+ set_dma_x_count(drv_data->rx_dma, word_count);
+ set_dma_start_addr(drv_data->tx_dma, drv_data->tx_dma_addr);
+ set_dma_start_addr(drv_data->rx_dma, drv_data->rx_dma_addr);
+ dma_config |= DMAFLOW_STOP | RESTART | DI_EN;
+ set_dma_config(drv_data->tx_dma, dma_config);
+ set_dma_config(drv_data->rx_dma, dma_config | WNR);
+ enable_dma(drv_data->tx_dma);
+ enable_dma(drv_data->rx_dma);
+ SSYNC();
+
+ bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN | SPI_RXCTL_RDR_NE);
+ SSYNC();
+ bfin_write(&drv_data->regs->tx_control,
+ SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF);
+
+ return 0;
+}
+
+static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+
+ if (!drv_data->rx) {
+ /* write only half duplex */
+ drv_data->ops->write(drv_data);
+ if (drv_data->tx != drv_data->tx_end)
+ return -EIO;
+ } else if (!drv_data->tx) {
+ /* read only half duplex */
+ drv_data->ops->read(drv_data);
+ if (drv_data->rx != drv_data->rx_end)
+ return -EIO;
+ } else {
+ /* full duplex mode */
+ drv_data->ops->duplex(drv_data);
+ if (drv_data->tx != drv_data->tx_end)
+ return -EIO;
+ }
+
+ if (!bfin_spi_flush(drv_data))
+ return -EIO;
+ msg->actual_length += drv_data->transfer_len;
+ tasklet_schedule(&drv_data->pump_transfers);
+ return 0;
+}
+
+static void bfin_spi_pump_transfers(unsigned long data)
+{
+ struct bfin_spi_master *drv_data = (struct bfin_spi_master *)data;
+ struct spi_message *msg = NULL;
+ struct spi_transfer *t = NULL;
+ struct bfin_spi_device *chip = NULL;
+ int ret;
+
+ /* Get current state information */
+ msg = drv_data->cur_msg;
+ t = drv_data->cur_transfer;
+ chip = drv_data->cur_chip;
+
+ /* Handle for abort */
+ if (drv_data->state == ERROR_STATE) {
+ msg->status = -EIO;
+ bfin_spi_giveback(drv_data);
+ return;
+ }
+
+ if (drv_data->state == RUNNING_STATE) {
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+ if (t->cs_change)
+ bfin_spi_cs_deactive(drv_data, chip);
+ bfin_spi_next_transfer(drv_data);
+ t = drv_data->cur_transfer;
+ }
+ /* Handle end of message */
+ if (drv_data->state == DONE_STATE) {
+ msg->status = 0;
+ bfin_spi_giveback(drv_data);
+ return;
+ }
+
+ if ((t->len == 0) || (t->tx_buf == NULL && t->rx_buf == NULL)) {
+ /* Schedule next transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+ return;
+ }
+
+ ret = bfin_spi_setup_transfer(drv_data);
+ if (ret) {
+ msg->status = ret;
+ bfin_spi_giveback(drv_data);
+ }
+
+ bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
+ bfin_spi_cs_active(drv_data, chip);
+ drv_data->state = RUNNING_STATE;
+
+ if (chip->enable_dma)
+ ret = bfin_spi_dma_xfer(drv_data);
+ else
+ ret = bfin_spi_pio_xfer(drv_data);
+ if (ret) {
+ msg->status = ret;
+ bfin_spi_giveback(drv_data);
+ }
+}
+
+static int bfin_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+
+ drv_data->cur_msg = m;
+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+ bfin_spi_restore_state(drv_data);
+
+ drv_data->state = START_STATE;
+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+ struct spi_transfer, transfer_list);
+
+ tasklet_schedule(&drv_data->pump_transfers);
+ return 0;
+}
+
+#define MAX_SPI_SSEL 7
+
+static const u16 ssel[][MAX_SPI_SSEL] = {
+ {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+ P_SPI0_SSEL4, P_SPI0_SSEL5,
+ P_SPI0_SSEL6, P_SPI0_SSEL7},
+
+ {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
+ P_SPI1_SSEL4, P_SPI1_SSEL5,
+ P_SPI1_SSEL6, P_SPI1_SSEL7},
+
+ {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
+ P_SPI2_SSEL4, P_SPI2_SSEL5,
+ P_SPI2_SSEL6, P_SPI2_SSEL7},
+};
+
+static int bfin_spi_setup(struct spi_device *spi)
+{
+ struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master);
+ struct bfin_spi_device *chip = spi_get_ctldata(spi);
+ u32 bfin_ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE;
+ int ret = -EINVAL;
+
+ if (!chip) {
+ struct bfin_spi3_chip *chip_info = spi->controller_data;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip) {
+ dev_err(&spi->dev, "can not allocate chip data\n");
+ return -ENOMEM;
+ }
+ if (chip_info) {
+ if (chip_info->control & ~bfin_ctl_reg) {
+ dev_err(&spi->dev,
+ "do not set bits that the SPI framework manages\n");
+ goto error;
+ }
+ chip->control = chip_info->control;
+ chip->cs_chg_udelay = chip_info->cs_chg_udelay;
+ chip->tx_dummy_val = chip_info->tx_dummy_val;
+ chip->enable_dma = chip_info->enable_dma;
+ }
+ chip->cs = spi->chip_select;
+ if (chip->cs < MAX_CTRL_CS) {
+ chip->ssel = (1 << chip->cs) << 8;
+ ret = peripheral_request(ssel[spi->master->bus_num]
+ [chip->cs-1], dev_name(&spi->dev));
+ if (ret) {
+ dev_err(&spi->dev, "peripheral_request() error\n");
+ goto error;
+ }
+ } else {
+ chip->cs_gpio = chip->cs - MAX_CTRL_CS;
+ ret = gpio_request_one(chip->cs_gpio, GPIOF_OUT_INIT_HIGH,
+ dev_name(&spi->dev));
+ if (ret) {
+ dev_err(&spi->dev, "gpio_request_one() error\n");
+ goto error;
+ }
+ }
+ spi_set_ctldata(spi, chip);
+ }
+
+ /* force a default base state */
+ chip->control &= bfin_ctl_reg;
+
+ if (spi->mode & SPI_CPOL)
+ chip->control |= SPI_CTL_CPOL;
+ if (spi->mode & SPI_CPHA)
+ chip->control |= SPI_CTL_CPHA;
+ if (spi->mode & SPI_LSB_FIRST)
+ chip->control |= SPI_CTL_LSBF;
+ chip->control |= SPI_CTL_MSTR;
+ /* we choose software to controll cs */
+ chip->control &= ~SPI_CTL_ASSEL;
+
+ chip->clock = hz_to_spi_clock(drv_data->sclk, spi->max_speed_hz);
+
+ bfin_spi_cs_enable(drv_data, chip);
+ bfin_spi_cs_deactive(drv_data, chip);
+
+ return 0;
+error:
+ if (chip) {
+ kfree(chip);
+ spi_set_ctldata(spi, NULL);
+ }
+
+ return ret;
+}
+
+static void bfin_spi_cleanup(struct spi_device *spi)
+{
+ struct bfin_spi_device *chip = spi_get_ctldata(spi);
+ struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master);
+
+ if (!chip)
+ return;
+
+ if (chip->cs < MAX_CTRL_CS) {
+ peripheral_free(ssel[spi->master->bus_num]
+ [chip->cs-1]);
+ bfin_spi_cs_disable(drv_data, chip);
+ } else {
+ gpio_free(chip->cs_gpio);
+ }
+
+ kfree(chip);
+ spi_set_ctldata(spi, NULL);
+}
+
+static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id)
+{
+ struct bfin_spi_master *drv_data = dev_id;
+ u32 dma_stat = get_dma_curr_irqstat(drv_data->tx_dma);
+
+ clear_dma_irqstat(drv_data->tx_dma);
+ if (dma_stat & DMA_DONE) {
+ drv_data->tx_num++;
+ } else {
+ dev_err(&drv_data->master->dev,
+ "spi tx dma error: %d\n", dma_stat);
+ if (drv_data->tx)
+ drv_data->state = ERROR_STATE;
+ }
+ bfin_write_and(&drv_data->regs->tx_control, ~SPI_TXCTL_TDR_NF);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
+{
+ struct bfin_spi_master *drv_data = dev_id;
+ struct spi_message *msg = drv_data->cur_msg;
+ u32 dma_stat = get_dma_curr_irqstat(drv_data->rx_dma);
+
+ clear_dma_irqstat(drv_data->rx_dma);
+ if (dma_stat & DMA_DONE) {
+ drv_data->rx_num++;
+ /* we may fail on tx dma */
+ if (drv_data->state != ERROR_STATE)
+ msg->actual_length += drv_data->transfer_len;
+ } else {
+ drv_data->state = ERROR_STATE;
+ dev_err(&drv_data->master->dev,
+ "spi rx dma error: %d\n", dma_stat);
+ }
+ bfin_write(&drv_data->regs->tx_control, 0);
+ bfin_write(&drv_data->regs->rx_control, 0);
+ if (drv_data->rx_num != drv_data->tx_num)
+ dev_dbg(&drv_data->master->dev,
+ "dma interrupt missing: tx=%d,rx=%d\n",
+ drv_data->tx_num, drv_data->rx_num);
+ tasklet_schedule(&drv_data->pump_transfers);
+ return IRQ_HANDLED;
+}
+
+static int bfin_spi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bfin_spi3_master *info = dev->platform_data;
+ struct spi_master *master;
+ struct bfin_spi_master *drv_data;
+ struct resource *mem, *res;
+ unsigned int tx_dma, rx_dma;
+ unsigned long sclk;
+ int ret;
+
+ if (!info) {
+ dev_err(dev, "platform data missing!\n");
+ return -ENODEV;
+ }
+
+ sclk = get_sclk1();
+ if (!sclk) {
+ dev_err(dev, "can not get sclk1\n");
+ return -ENXIO;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!res) {
+ dev_err(dev, "can not get tx dma resource\n");
+ return -ENXIO;
+ }
+ tx_dma = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!res) {
+ dev_err(dev, "can not get rx dma resource\n");
+ return -ENXIO;
+ }
+ rx_dma = res->start;
+
+ /* allocate master with space for drv_data */
+ master = spi_alloc_master(dev, sizeof(*drv_data));
+ if (!master) {
+ dev_err(dev, "can not alloc spi_master\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, master);
+
+ /* the mode bits supported by this driver */
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = info->num_chipselect;
+ master->cleanup = bfin_spi_cleanup;
+ master->setup = bfin_spi_setup;
+ master->transfer_one_message = bfin_spi_transfer_one_message;
+ master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1);
+
+ drv_data = spi_master_get_devdata(master);
+ drv_data->master = master;
+ drv_data->tx_dma = tx_dma;
+ drv_data->rx_dma = rx_dma;
+ drv_data->pin_req = info->pin_req;
+ drv_data->sclk = sclk;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ drv_data->regs = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(drv_data->regs)) {
+ ret = PTR_ERR(drv_data->regs);
+ goto err_put_master;
+ }
+
+ /* request tx and rx dma */
+ ret = request_dma(tx_dma, "SPI_TX_DMA");
+ if (ret) {
+ dev_err(dev, "can not request SPI TX DMA channel\n");
+ goto err_put_master;
+ }
+ set_dma_callback(tx_dma, bfin_spi_tx_dma_isr, drv_data);
+
+ ret = request_dma(rx_dma, "SPI_RX_DMA");
+ if (ret) {
+ dev_err(dev, "can not request SPI RX DMA channel\n");
+ goto err_free_tx_dma;
+ }
+ set_dma_callback(drv_data->rx_dma, bfin_spi_rx_dma_isr, drv_data);
+
+ /* request CLK, MOSI and MISO */
+ ret = peripheral_request_list(drv_data->pin_req, "bfin-spi3");
+ if (ret < 0) {
+ dev_err(dev, "can not request spi pins\n");
+ goto err_free_rx_dma;
+ }
+
+ bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA);
+ bfin_write(&drv_data->regs->ssel, 0x0000FE00);
+ bfin_write(&drv_data->regs->delay, 0x0);
+
+ tasklet_init(&drv_data->pump_transfers,
+ bfin_spi_pump_transfers, (unsigned long)drv_data);
+ /* register with the SPI framework */
+ ret = spi_register_master(master);
+ if (ret) {
+ dev_err(dev, "can not register spi master\n");
+ goto err_free_peripheral;
+ }
+
+ return ret;
+
+err_free_peripheral:
+ peripheral_free_list(drv_data->pin_req);
+err_free_rx_dma:
+ free_dma(rx_dma);
+err_free_tx_dma:
+ free_dma(tx_dma);
+err_put_master:
+ spi_master_put(master);
+
+ return ret;
+}
+
+static int bfin_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+
+ bfin_spi_disable(drv_data);
+
+ peripheral_free_list(drv_data->pin_req);
+ free_dma(drv_data->rx_dma);
+ free_dma(drv_data->tx_dma);
+
+ spi_unregister_master(drv_data->master);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_spi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+
+ spi_master_suspend(master);
+
+ drv_data->control = bfin_read(&drv_data->regs->control);
+ drv_data->ssel = bfin_read(&drv_data->regs->ssel);
+
+ bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA);
+ bfin_write(&drv_data->regs->ssel, 0x0000FE00);
+ dma_disable_irq(drv_data->rx_dma);
+ dma_disable_irq(drv_data->tx_dma);
+
+ return 0;
+}
+
+static int bfin_spi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+ int ret = 0;
+
+ /* bootrom may modify spi and dma status when resume in spi boot mode */
+ disable_dma(drv_data->rx_dma);
+
+ dma_enable_irq(drv_data->rx_dma);
+ dma_enable_irq(drv_data->tx_dma);
+ bfin_write(&drv_data->regs->control, drv_data->control);
+ bfin_write(&drv_data->regs->ssel, drv_data->ssel);
+
+ ret = spi_master_resume(master);
+ if (ret) {
+ free_dma(drv_data->rx_dma);
+ free_dma(drv_data->tx_dma);
+ }
+
+ return ret;
+}
+#endif
+static const struct dev_pm_ops bfin_spi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(bfin_spi_suspend, bfin_spi_resume)
+};
+
+MODULE_ALIAS("platform:bfin-spi3");
+static struct platform_driver bfin_spi_driver = {
+ .driver = {
+ .name = "bfin-spi3",
+ .owner = THIS_MODULE,
+ .pm = &bfin_spi_pm_ops,
+ },
+ .remove = bfin_spi_remove,
+};
+
+module_platform_driver_probe(bfin_spi_driver, bfin_spi_probe);
+
+MODULE_DESCRIPTION("Analog Devices SPI3 controller driver");
+MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index a63d7da3bfe2..e3946e44e076 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -255,150 +255,140 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
* Drivers can provide word-at-a-time i/o primitives, or provide
* transfer-at-a-time ones to leverage dma or fifo hardware.
*/
-static void bitbang_work(struct work_struct *work)
+
+static int spi_bitbang_prepare_hardware(struct spi_master *spi)
{
- struct spi_bitbang *bitbang =
- container_of(work, struct spi_bitbang, work);
+ struct spi_bitbang *bitbang;
unsigned long flags;
- struct spi_message *m, *_m;
+
+ bitbang = spi_master_get_devdata(spi);
spin_lock_irqsave(&bitbang->lock, flags);
bitbang->busy = 1;
- list_for_each_entry_safe(m, _m, &bitbang->queue, queue) {
- struct spi_device *spi;
- unsigned nsecs;
- struct spi_transfer *t = NULL;
- unsigned tmp;
- unsigned cs_change;
- int status;
- int do_setup = -1;
-
- list_del(&m->queue);
- spin_unlock_irqrestore(&bitbang->lock, flags);
-
- /* FIXME this is made-up ... the correct value is known to
- * word-at-a-time bitbang code, and presumably chipselect()
- * should enforce these requirements too?
- */
- nsecs = 100;
+ spin_unlock_irqrestore(&bitbang->lock, flags);
- spi = m->spi;
- tmp = 0;
- cs_change = 1;
- status = 0;
+ return 0;
+}
- list_for_each_entry (t, &m->transfers, transfer_list) {
-
- /* override speed or wordsize? */
- if (t->speed_hz || t->bits_per_word)
- do_setup = 1;
-
- /* init (-1) or override (1) transfer params */
- if (do_setup != 0) {
- status = bitbang->setup_transfer(spi, t);
- if (status < 0)
- break;
- if (do_setup == -1)
- do_setup = 0;
- }
-
- /* set up default clock polarity, and activate chip;
- * this implicitly updates clock and spi modes as
- * previously recorded for this device via setup().
- * (and also deselects any other chip that might be
- * selected ...)
- */
- if (cs_change) {
- bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
- ndelay(nsecs);
- }
- cs_change = t->cs_change;
- if (!t->tx_buf && !t->rx_buf && t->len) {
- status = -EINVAL;
- break;
- }
+static int spi_bitbang_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct spi_bitbang *bitbang;
+ unsigned nsecs;
+ struct spi_transfer *t = NULL;
+ unsigned cs_change;
+ int status;
+ int do_setup = -1;
+ struct spi_device *spi = m->spi;
+
+ bitbang = spi_master_get_devdata(master);
+
+ /* FIXME this is made-up ... the correct value is known to
+ * word-at-a-time bitbang code, and presumably chipselect()
+ * should enforce these requirements too?
+ */
+ nsecs = 100;
- /* transfer data. the lower level code handles any
- * new dma mappings it needs. our caller always gave
- * us dma-safe buffers.
- */
- if (t->len) {
- /* REVISIT dma API still needs a designated
- * DMA_ADDR_INVALID; ~0 might be better.
- */
- if (!m->is_dma_mapped)
- t->rx_dma = t->tx_dma = 0;
- status = bitbang->txrx_bufs(spi, t);
- }
- if (status > 0)
- m->actual_length += status;
- if (status != t->len) {
- /* always report some kind of error */
- if (status >= 0)
- status = -EREMOTEIO;
+ cs_change = 1;
+ status = 0;
+
+ list_for_each_entry (t, &m->transfers, transfer_list) {
+
+ /* override speed or wordsize? */
+ if (t->speed_hz || t->bits_per_word)
+ do_setup = 1;
+
+ /* init (-1) or override (1) transfer params */
+ if (do_setup != 0) {
+ status = bitbang->setup_transfer(spi, t);
+ if (status < 0)
break;
- }
- status = 0;
-
- /* protocol tweaks before next transfer */
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) {
- /* sometimes a short mid-message deselect of the chip
- * may be needed to terminate a mode or command
- */
- ndelay(nsecs);
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
+ if (do_setup == -1)
+ do_setup = 0;
}
- m->status = status;
- m->complete(m->context);
+ /* set up default clock polarity, and activate chip;
+ * this implicitly updates clock and spi modes as
+ * previously recorded for this device via setup().
+ * (and also deselects any other chip that might be
+ * selected ...)
+ */
+ if (cs_change) {
+ bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
+ ndelay(nsecs);
+ }
+ cs_change = t->cs_change;
+ if (!t->tx_buf && !t->rx_buf && t->len) {
+ status = -EINVAL;
+ break;
+ }
- /* normally deactivate chipselect ... unless no error and
- * cs_change has hinted that the next message will probably
- * be for this chip too.
+ /* transfer data. the lower level code handles any
+ * new dma mappings it needs. our caller always gave
+ * us dma-safe buffers.
*/
- if (!(status == 0 && cs_change)) {
+ if (t->len) {
+ /* REVISIT dma API still needs a designated
+ * DMA_ADDR_INVALID; ~0 might be better.
+ */
+ if (!m->is_dma_mapped)
+ t->rx_dma = t->tx_dma = 0;
+ status = bitbang->txrx_bufs(spi, t);
+ }
+ if (status > 0)
+ m->actual_length += status;
+ if (status != t->len) {
+ /* always report some kind of error */
+ if (status >= 0)
+ status = -EREMOTEIO;
+ break;
+ }
+ status = 0;
+
+ /* protocol tweaks before next transfer */
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) {
+ /* sometimes a short mid-message deselect of the chip
+ * may be needed to terminate a mode or command
+ */
ndelay(nsecs);
bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
ndelay(nsecs);
}
+ }
+
+ m->status = status;
- spin_lock_irqsave(&bitbang->lock, flags);
+ /* normally deactivate chipselect ... unless no error and
+ * cs_change has hinted that the next message will probably
+ * be for this chip too.
+ */
+ if (!(status == 0 && cs_change)) {
+ ndelay(nsecs);
+ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
}
- bitbang->busy = 0;
- spin_unlock_irqrestore(&bitbang->lock, flags);
+
+ spi_finalize_current_message(master);
+
+ return status;
}
-/**
- * spi_bitbang_transfer - default submit to transfer queue
- */
-int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
+static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
{
- struct spi_bitbang *bitbang;
+ struct spi_bitbang *bitbang;
unsigned long flags;
- int status = 0;
- m->actual_length = 0;
- m->status = -EINPROGRESS;
-
- bitbang = spi_master_get_devdata(spi->master);
+ bitbang = spi_master_get_devdata(spi);
spin_lock_irqsave(&bitbang->lock, flags);
- if (!spi->max_speed_hz)
- status = -ENETDOWN;
- else {
- list_add_tail(&m->queue, &bitbang->queue);
- queue_work(bitbang->workqueue, &bitbang->work);
- }
+ bitbang->busy = 0;
spin_unlock_irqrestore(&bitbang->lock, flags);
- return status;
+ return 0;
}
-EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
/*----------------------------------------------------------------------*/
@@ -428,20 +418,22 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
int spi_bitbang_start(struct spi_bitbang *bitbang)
{
struct spi_master *master = bitbang->master;
- int status;
if (!master || !bitbang->chipselect)
return -EINVAL;
- INIT_WORK(&bitbang->work, bitbang_work);
spin_lock_init(&bitbang->lock);
- INIT_LIST_HEAD(&bitbang->queue);
if (!master->mode_bits)
master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
- if (!master->transfer)
- master->transfer = spi_bitbang_transfer;
+ if (master->transfer || master->transfer_one_message)
+ return -EINVAL;
+
+ master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
+ master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
+ master->transfer_one_message = spi_bitbang_transfer_one;
+
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
@@ -452,34 +444,12 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
master->setup = spi_bitbang_setup;
master->cleanup = spi_bitbang_cleanup;
}
- } else if (!master->setup)
- return -EINVAL;
- if (master->transfer == spi_bitbang_transfer &&
- !bitbang->setup_transfer)
- return -EINVAL;
-
- /* this task is the only thing to touch the SPI bits */
- bitbang->busy = 0;
- bitbang->workqueue = create_singlethread_workqueue(
- dev_name(master->dev.parent));
- if (bitbang->workqueue == NULL) {
- status = -EBUSY;
- goto err1;
}
/* driver may get busy before register() returns, especially
* if someone registered boardinfo for devices
*/
- status = spi_register_master(master);
- if (status < 0)
- goto err2;
-
- return status;
-
-err2:
- destroy_workqueue(bitbang->workqueue);
-err1:
- return status;
+ return spi_register_master(master);
}
EXPORT_SYMBOL_GPL(spi_bitbang_start);
@@ -490,10 +460,6 @@ int spi_bitbang_stop(struct spi_bitbang *bitbang)
{
spi_unregister_master(bitbang->master);
- WARN_ON(!list_empty(&bitbang->queue));
-
- destroy_workqueue(bitbang->workqueue);
-
return 0;
}
EXPORT_SYMBOL_GPL(spi_bitbang_stop);
diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index 17965fe225cc..5655acf55bfe 100644
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -239,11 +239,8 @@ static int spi_clps711x_probe(struct platform_device *pdev)
}
dev_err(&pdev->dev, "Failed to register master\n");
- devm_free_irq(&pdev->dev, IRQ_SSEOTI, hw);
clk_out:
- devm_clk_put(&pdev->dev, hw->spi_clk);
-
err_out:
while (--i >= 0)
if (gpio_is_valid(hw->chipselect[i]))
@@ -261,13 +258,10 @@ static int spi_clps711x_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
- devm_free_irq(&pdev->dev, IRQ_SSEOTI, hw);
-
for (i = 0; i < master->num_chipselect; i++)
if (gpio_is_valid(hw->chipselect[i]))
gpio_free(hw->chipselect[i]);
- devm_clk_put(&pdev->dev, hw->spi_clk);
spi_unregister_master(master);
kfree(master);
diff --git a/drivers/spi/spi-efm32.c b/drivers/spi/spi-efm32.c
new file mode 100644
index 000000000000..7d84418a01d8
--- /dev/null
+++ b/drivers/spi/spi-efm32.c
@@ -0,0 +1,516 @@
+/*
+ * Copyright (C) 2012-2013 Uwe Kleine-Koenig for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_data/efm32-spi.h>
+
+#define DRIVER_NAME "efm32-spi"
+
+#define MASK_VAL(mask, val) ((val << __ffs(mask)) & mask)
+
+#define REG_CTRL 0x00
+#define REG_CTRL_SYNC 0x0001
+#define REG_CTRL_CLKPOL 0x0100
+#define REG_CTRL_CLKPHA 0x0200
+#define REG_CTRL_MSBF 0x0400
+#define REG_CTRL_TXBIL 0x1000
+
+#define REG_FRAME 0x04
+#define REG_FRAME_DATABITS__MASK 0x000f
+#define REG_FRAME_DATABITS(n) ((n) - 3)
+
+#define REG_CMD 0x0c
+#define REG_CMD_RXEN 0x0001
+#define REG_CMD_RXDIS 0x0002
+#define REG_CMD_TXEN 0x0004
+#define REG_CMD_TXDIS 0x0008
+#define REG_CMD_MASTEREN 0x0010
+
+#define REG_STATUS 0x10
+#define REG_STATUS_TXENS 0x0002
+#define REG_STATUS_TXC 0x0020
+#define REG_STATUS_TXBL 0x0040
+#define REG_STATUS_RXDATAV 0x0080
+
+#define REG_CLKDIV 0x14
+
+#define REG_RXDATAX 0x18
+#define REG_RXDATAX_RXDATA__MASK 0x01ff
+#define REG_RXDATAX_PERR 0x4000
+#define REG_RXDATAX_FERR 0x8000
+
+#define REG_TXDATA 0x34
+
+#define REG_IF 0x40
+#define REG_IF_TXBL 0x0002
+#define REG_IF_RXDATAV 0x0004
+
+#define REG_IFS 0x44
+#define REG_IFC 0x48
+#define REG_IEN 0x4c
+
+#define REG_ROUTE 0x54
+#define REG_ROUTE_RXPEN 0x0001
+#define REG_ROUTE_TXPEN 0x0002
+#define REG_ROUTE_CLKPEN 0x0008
+#define REG_ROUTE_LOCATION__MASK 0x0700
+#define REG_ROUTE_LOCATION(n) MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
+
+struct efm32_spi_ddata {
+ struct spi_bitbang bitbang;
+
+ spinlock_t lock;
+
+ struct clk *clk;
+ void __iomem *base;
+ unsigned int rxirq, txirq;
+ struct efm32_spi_pdata pdata;
+
+ /* irq data */
+ struct completion done;
+ const u8 *tx_buf;
+ u8 *rx_buf;
+ unsigned tx_len, rx_len;
+
+ /* chip selects */
+ unsigned csgpio[];
+};
+
+#define ddata_to_dev(ddata) (&(ddata->bitbang.master->dev))
+#define efm32_spi_vdbg(ddata, format, arg...) \
+ dev_vdbg(ddata_to_dev(ddata), format, ##arg)
+
+static void efm32_spi_write32(struct efm32_spi_ddata *ddata,
+ u32 value, unsigned offset)
+{
+ writel_relaxed(value, ddata->base + offset);
+}
+
+static u32 efm32_spi_read32(struct efm32_spi_ddata *ddata, unsigned offset)
+{
+ return readl_relaxed(ddata->base + offset);
+}
+
+static void efm32_spi_chipselect(struct spi_device *spi, int is_on)
+{
+ struct efm32_spi_ddata *ddata = spi_master_get_devdata(spi->master);
+ int value = !(spi->mode & SPI_CS_HIGH) == !(is_on == BITBANG_CS_ACTIVE);
+
+ gpio_set_value(ddata->csgpio[spi->chip_select], value);
+}
+
+static int efm32_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct efm32_spi_ddata *ddata = spi_master_get_devdata(spi->master);
+
+ unsigned bpw = t->bits_per_word ?: spi->bits_per_word;
+ unsigned speed = t->speed_hz ?: spi->max_speed_hz;
+ unsigned long clkfreq = clk_get_rate(ddata->clk);
+ u32 clkdiv;
+
+ efm32_spi_write32(ddata, REG_CTRL_SYNC | REG_CTRL_MSBF |
+ (spi->mode & SPI_CPHA ? REG_CTRL_CLKPHA : 0) |
+ (spi->mode & SPI_CPOL ? REG_CTRL_CLKPOL : 0), REG_CTRL);
+
+ efm32_spi_write32(ddata,
+ REG_FRAME_DATABITS(bpw), REG_FRAME);
+
+ if (2 * speed >= clkfreq)
+ clkdiv = 0;
+ else
+ clkdiv = 64 * (DIV_ROUND_UP(2 * clkfreq, speed) - 4);
+
+ if (clkdiv > (1U << 21))
+ return -EINVAL;
+
+ efm32_spi_write32(ddata, clkdiv, REG_CLKDIV);
+ efm32_spi_write32(ddata, REG_CMD_MASTEREN, REG_CMD);
+ efm32_spi_write32(ddata, REG_CMD_RXEN | REG_CMD_TXEN, REG_CMD);
+
+ return 0;
+}
+
+static void efm32_spi_tx_u8(struct efm32_spi_ddata *ddata)
+{
+ u8 val = 0;
+
+ if (ddata->tx_buf) {
+ val = *ddata->tx_buf;
+ ddata->tx_buf++;
+ }
+
+ ddata->tx_len--;
+ efm32_spi_write32(ddata, val, REG_TXDATA);
+ efm32_spi_vdbg(ddata, "%s: tx 0x%x\n", __func__, val);
+}
+
+static void efm32_spi_rx_u8(struct efm32_spi_ddata *ddata)
+{
+ u32 rxdata = efm32_spi_read32(ddata, REG_RXDATAX);
+ efm32_spi_vdbg(ddata, "%s: rx 0x%x\n", __func__, rxdata);
+
+ if (ddata->rx_buf) {
+ *ddata->rx_buf = rxdata;
+ ddata->rx_buf++;
+ }
+
+ ddata->rx_len--;
+}
+
+static void efm32_spi_filltx(struct efm32_spi_ddata *ddata)
+{
+ while (ddata->tx_len &&
+ ddata->tx_len + 2 > ddata->rx_len &&
+ efm32_spi_read32(ddata, REG_STATUS) & REG_STATUS_TXBL) {
+ efm32_spi_tx_u8(ddata);
+ }
+}
+
+static int efm32_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct efm32_spi_ddata *ddata = spi_master_get_devdata(spi->master);
+ int ret = -EBUSY;
+
+ spin_lock_irq(&ddata->lock);
+
+ if (ddata->tx_buf || ddata->rx_buf)
+ goto out_unlock;
+
+ ddata->tx_buf = t->tx_buf;
+ ddata->rx_buf = t->rx_buf;
+ ddata->tx_len = ddata->rx_len =
+ t->len * DIV_ROUND_UP(t->bits_per_word, 8);
+
+ efm32_spi_filltx(ddata);
+
+ init_completion(&ddata->done);
+
+ efm32_spi_write32(ddata, REG_IF_TXBL | REG_IF_RXDATAV, REG_IEN);
+
+ spin_unlock_irq(&ddata->lock);
+
+ wait_for_completion(&ddata->done);
+
+ spin_lock_irq(&ddata->lock);
+
+ ret = t->len - max(ddata->tx_len, ddata->rx_len);
+
+ efm32_spi_write32(ddata, 0, REG_IEN);
+ ddata->tx_buf = ddata->rx_buf = NULL;
+
+out_unlock:
+ spin_unlock_irq(&ddata->lock);
+
+ return ret;
+}
+
+static irqreturn_t efm32_spi_rxirq(int irq, void *data)
+{
+ struct efm32_spi_ddata *ddata = data;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock(&ddata->lock);
+
+ while (ddata->rx_len > 0 &&
+ efm32_spi_read32(ddata, REG_STATUS) &
+ REG_STATUS_RXDATAV) {
+ efm32_spi_rx_u8(ddata);
+
+ ret = IRQ_HANDLED;
+ }
+
+ if (!ddata->rx_len) {
+ u32 ien = efm32_spi_read32(ddata, REG_IEN);
+
+ ien &= ~REG_IF_RXDATAV;
+
+ efm32_spi_write32(ddata, ien, REG_IEN);
+
+ complete(&ddata->done);
+ }
+
+ spin_unlock(&ddata->lock);
+
+ return ret;
+}
+
+static irqreturn_t efm32_spi_txirq(int irq, void *data)
+{
+ struct efm32_spi_ddata *ddata = data;
+
+ efm32_spi_vdbg(ddata,
+ "%s: txlen = %u, rxlen = %u, if=0x%08x, stat=0x%08x\n",
+ __func__, ddata->tx_len, ddata->rx_len,
+ efm32_spi_read32(ddata, REG_IF),
+ efm32_spi_read32(ddata, REG_STATUS));
+
+ spin_lock(&ddata->lock);
+
+ efm32_spi_filltx(ddata);
+
+ efm32_spi_vdbg(ddata, "%s: txlen = %u, rxlen = %u\n",
+ __func__, ddata->tx_len, ddata->rx_len);
+
+ if (!ddata->tx_len) {
+ u32 ien = efm32_spi_read32(ddata, REG_IEN);
+
+ ien &= ~REG_IF_TXBL;
+
+ efm32_spi_write32(ddata, ien, REG_IEN);
+ efm32_spi_vdbg(ddata, "disable TXBL\n");
+ }
+
+ spin_unlock(&ddata->lock);
+
+ return IRQ_HANDLED;
+}
+
+static const struct efm32_spi_pdata efm32_spi_pdata_default = {
+ .location = 1,
+};
+
+static u32 efm32_spi_get_configured_location(struct efm32_spi_ddata *ddata)
+{
+ u32 reg = efm32_spi_read32(ddata, REG_ROUTE);
+
+ return (reg & REG_ROUTE_LOCATION__MASK) >> __ffs(REG_ROUTE_LOCATION__MASK);
+}
+
+static int efm32_spi_probe_dt(struct platform_device *pdev,
+ struct spi_master *master, struct efm32_spi_ddata *ddata)
+{
+ struct device_node *np = pdev->dev.of_node;
+ u32 location;
+ int ret;
+
+ if (!np)
+ return 1;
+
+ ret = of_property_read_u32(np, "location", &location);
+ if (!ret) {
+ dev_dbg(&pdev->dev, "using location %u\n", location);
+ } else {
+ /* default to location configured in hardware */
+ location = efm32_spi_get_configured_location(ddata);
+
+ dev_info(&pdev->dev, "fall back to location %u\n", location);
+ }
+
+ ddata->pdata.location = location;
+
+ /* spi core takes care about the bus number using an alias */
+ master->bus_num = -1;
+
+ return 0;
+}
+
+static int efm32_spi_probe(struct platform_device *pdev)
+{
+ struct efm32_spi_ddata *ddata;
+ struct resource *res;
+ int ret;
+ struct spi_master *master;
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int num_cs, i;
+
+ num_cs = of_gpio_named_count(np, "cs-gpios");
+
+ master = spi_alloc_master(&pdev->dev,
+ sizeof(*ddata) + num_cs * sizeof(unsigned));
+ if (!master) {
+ dev_dbg(&pdev->dev,
+ "failed to allocate spi master controller\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, master);
+
+ master->dev.of_node = pdev->dev.of_node;
+
+ master->num_chipselect = num_cs;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
+
+ ddata = spi_master_get_devdata(master);
+
+ ddata->bitbang.master = spi_master_get(master);
+ ddata->bitbang.chipselect = efm32_spi_chipselect;
+ ddata->bitbang.setup_transfer = efm32_spi_setup_transfer;
+ ddata->bitbang.txrx_bufs = efm32_spi_txrx_bufs;
+
+ spin_lock_init(&ddata->lock);
+
+ ddata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ddata->clk)) {
+ ret = PTR_ERR(ddata->clk);
+ dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < num_cs; ++i) {
+ ret = of_get_named_gpio(np, "cs-gpios", i);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get csgpio#%u (%d)\n",
+ i, ret);
+ goto err;
+ }
+ ddata->csgpio[i] = ret;
+ dev_dbg(&pdev->dev, "csgpio#%u = %u\n", i, ddata->csgpio[i]);
+ ret = devm_gpio_request_one(&pdev->dev, ddata->csgpio[i],
+ GPIOF_OUT_INIT_LOW, DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "failed to configure csgpio#%u (%d)\n",
+ i, ret);
+ goto err;
+ }
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "failed to determine base address\n");
+ goto err;
+ }
+
+ if (resource_size(res) < 60) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "memory resource too small\n");
+ goto err;
+ }
+
+ ddata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ddata->base)) {
+ ret = PTR_ERR(ddata->base);
+ goto err;
+ }
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ dev_err(&pdev->dev, "failed to get rx irq (%d)\n", ret);
+ goto err;
+ }
+
+ ddata->rxirq = ret;
+
+ ret = platform_get_irq(pdev, 1);
+ if (ret <= 0)
+ ret = ddata->rxirq + 1;
+
+ ddata->txirq = ret;
+
+ ret = clk_prepare_enable(ddata->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
+ goto err;
+ }
+
+ ret = efm32_spi_probe_dt(pdev, master, ddata);
+ if (ret > 0) {
+ /* not created by device tree */
+ const struct efm32_spi_pdata *pdata =
+ dev_get_platdata(&pdev->dev);
+
+ if (pdata)
+ ddata->pdata = *pdata;
+ else
+ ddata->pdata.location =
+ efm32_spi_get_configured_location(ddata);
+
+ master->bus_num = pdev->id;
+
+ } else if (ret < 0) {
+ goto err_disable_clk;
+ }
+
+ efm32_spi_write32(ddata, 0, REG_IEN);
+ efm32_spi_write32(ddata, REG_ROUTE_TXPEN | REG_ROUTE_RXPEN |
+ REG_ROUTE_CLKPEN |
+ REG_ROUTE_LOCATION(ddata->pdata.location), REG_ROUTE);
+
+ ret = request_irq(ddata->rxirq, efm32_spi_rxirq,
+ 0, DRIVER_NAME " rx", ddata);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register rxirq (%d)\n", ret);
+ goto err_disable_clk;
+ }
+
+ ret = request_irq(ddata->txirq, efm32_spi_txirq,
+ 0, DRIVER_NAME " tx", ddata);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register txirq (%d)\n", ret);
+ goto err_free_rx_irq;
+ }
+
+ ret = spi_bitbang_start(&ddata->bitbang);
+ if (ret) {
+ dev_err(&pdev->dev, "spi_bitbang_start failed (%d)\n", ret);
+
+ free_irq(ddata->txirq, ddata);
+err_free_rx_irq:
+ free_irq(ddata->rxirq, ddata);
+err_disable_clk:
+ clk_disable_unprepare(ddata->clk);
+err:
+ spi_master_put(master);
+ kfree(master);
+ }
+
+ return ret;
+}
+
+static int efm32_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct efm32_spi_ddata *ddata = spi_master_get_devdata(master);
+
+ efm32_spi_write32(ddata, 0, REG_IEN);
+
+ free_irq(ddata->txirq, ddata);
+ free_irq(ddata->rxirq, ddata);
+ clk_disable_unprepare(ddata->clk);
+ spi_master_put(master);
+ kfree(master);
+
+ return 0;
+}
+
+static const struct of_device_id efm32_spi_dt_ids[] = {
+ {
+ .compatible = "efm32,spi",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, efm32_spi_dt_ids);
+
+static struct platform_driver efm32_spi_driver = {
+ .probe = efm32_spi_probe,
+ .remove = efm32_spi_remove,
+
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = efm32_spi_dt_ids,
+ },
+};
+module_platform_driver(efm32_spi_driver);
+
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("EFM32 SPI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index cad30b8a1d71..31611f7d7be9 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
#include <linux/spi/spi.h>
@@ -70,19 +69,13 @@
/**
* struct ep93xx_spi - EP93xx SPI controller structure
- * @lock: spinlock that protects concurrent accesses to fields @running,
- * @current_msg and @msg_queue
* @pdev: pointer to platform device
* @clk: clock for the controller
* @regs_base: pointer to ioremap()'d registers
* @sspdr_phys: physical address of the SSPDR register
* @min_rate: minimum clock rate (in Hz) supported by the controller
* @max_rate: maximum clock rate (in Hz) supported by the controller
- * @running: is the queue running
- * @wq: workqueue used by the driver
- * @msg_work: work that is queued for the driver
* @wait: wait here until given transfer is completed
- * @msg_queue: queue for the messages
* @current_msg: message that is currently processed (or %NULL if none)
* @tx: current byte in transfer to transmit
* @rx: current byte in transfer to receive
@@ -96,30 +89,15 @@
* @tx_sgt: sg table for TX transfers
* @zeropage: dummy page used as RX buffer when only TX buffer is passed in by
* the client
- *
- * This structure holds EP93xx SPI controller specific information. When
- * @running is %true, driver accepts transfer requests from protocol drivers.
- * @current_msg is used to hold pointer to the message that is currently
- * processed. If @current_msg is %NULL, it means that no processing is going
- * on.
- *
- * Most of the fields are only written once and they can be accessed without
- * taking the @lock. Fields that are accessed concurrently are: @current_msg,
- * @running, and @msg_queue.
*/
struct ep93xx_spi {
- spinlock_t lock;
const struct platform_device *pdev;
struct clk *clk;
void __iomem *regs_base;
unsigned long sspdr_phys;
unsigned long min_rate;
unsigned long max_rate;
- bool running;
- struct workqueue_struct *wq;
- struct work_struct msg_work;
struct completion wait;
- struct list_head msg_queue;
struct spi_message *current_msg;
size_t tx;
size_t rx;
@@ -136,50 +114,36 @@ struct ep93xx_spi {
/**
* struct ep93xx_spi_chip - SPI device hardware settings
* @spi: back pointer to the SPI device
- * @rate: max rate in hz this chip supports
- * @div_cpsr: cpsr (pre-scaler) divider
- * @div_scr: scr divider
- * @dss: bits per word (4 - 16 bits)
* @ops: private chip operations
- *
- * This structure is used to store hardware register specific settings for each
- * SPI device. Settings are written to hardware by function
- * ep93xx_spi_chip_setup().
*/
struct ep93xx_spi_chip {
const struct spi_device *spi;
- unsigned long rate;
- u8 div_cpsr;
- u8 div_scr;
- u8 dss;
struct ep93xx_spi_chip_ops *ops;
};
/* converts bits per word to CR0.DSS value */
#define bits_per_word_to_dss(bpw) ((bpw) - 1)
-static inline void
-ep93xx_spi_write_u8(const struct ep93xx_spi *espi, u16 reg, u8 value)
+static void ep93xx_spi_write_u8(const struct ep93xx_spi *espi,
+ u16 reg, u8 value)
{
- __raw_writeb(value, espi->regs_base + reg);
+ writeb(value, espi->regs_base + reg);
}
-static inline u8
-ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg)
+static u8 ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg)
{
- return __raw_readb(spi->regs_base + reg);
+ return readb(spi->regs_base + reg);
}
-static inline void
-ep93xx_spi_write_u16(const struct ep93xx_spi *espi, u16 reg, u16 value)
+static void ep93xx_spi_write_u16(const struct ep93xx_spi *espi,
+ u16 reg, u16 value)
{
- __raw_writew(value, espi->regs_base + reg);
+ writew(value, espi->regs_base + reg);
}
-static inline u16
-ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg)
+static u16 ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg)
{
- return __raw_readw(spi->regs_base + reg);
+ return readw(spi->regs_base + reg);
}
static int ep93xx_spi_enable(const struct ep93xx_spi *espi)
@@ -230,17 +194,13 @@ static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi)
/**
* ep93xx_spi_calc_divisors() - calculates SPI clock divisors
* @espi: ep93xx SPI controller struct
- * @chip: divisors are calculated for this chip
* @rate: desired SPI output clock rate
- *
- * Function calculates cpsr (clock pre-scaler) and scr divisors based on
- * given @rate and places them to @chip->div_cpsr and @chip->div_scr. If,
- * for some reason, divisors cannot be calculated nothing is stored and
- * %-EINVAL is returned.
+ * @div_cpsr: pointer to return the cpsr (pre-scaler) divider
+ * @div_scr: pointer to return the scr divider
*/
static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
- struct ep93xx_spi_chip *chip,
- unsigned long rate)
+ unsigned long rate,
+ u8 *div_cpsr, u8 *div_scr)
{
unsigned long spi_clk_rate = clk_get_rate(espi->clk);
int cpsr, scr;
@@ -248,7 +208,7 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
/*
* Make sure that max value is between values supported by the
* controller. Note that minimum value is already checked in
- * ep93xx_spi_transfer().
+ * ep93xx_spi_transfer_one_message().
*/
rate = clamp(rate, espi->min_rate, espi->max_rate);
@@ -263,8 +223,8 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
for (cpsr = 2; cpsr <= 254; cpsr += 2) {
for (scr = 0; scr <= 255; scr++) {
if ((spi_clk_rate / (cpsr * (scr + 1))) <= rate) {
- chip->div_scr = (u8)scr;
- chip->div_cpsr = (u8)cpsr;
+ *div_scr = (u8)scr;
+ *div_cpsr = (u8)cpsr;
return 0;
}
}
@@ -319,73 +279,11 @@ static int ep93xx_spi_setup(struct spi_device *spi)
spi_set_ctldata(spi, chip);
}
- if (spi->max_speed_hz != chip->rate) {
- int err;
-
- err = ep93xx_spi_calc_divisors(espi, chip, spi->max_speed_hz);
- if (err != 0) {
- spi_set_ctldata(spi, NULL);
- kfree(chip);
- return err;
- }
- chip->rate = spi->max_speed_hz;
- }
-
- chip->dss = bits_per_word_to_dss(spi->bits_per_word);
-
ep93xx_spi_cs_control(spi, false);
return 0;
}
/**
- * ep93xx_spi_transfer() - queue message to be transferred
- * @spi: target SPI device
- * @msg: message to be transferred
- *
- * This function is called by SPI device drivers when they are going to transfer
- * a new message. It simply puts the message in the queue and schedules
- * workqueue to perform the actual transfer later on.
- *
- * Returns %0 on success and negative error in case of failure.
- */
-static int ep93xx_spi_transfer(struct spi_device *spi, struct spi_message *msg)
-{
- struct ep93xx_spi *espi = spi_master_get_devdata(spi->master);
- struct spi_transfer *t;
- unsigned long flags;
-
- if (!msg || !msg->complete)
- return -EINVAL;
-
- /* first validate each transfer */
- list_for_each_entry(t, &msg->transfers, transfer_list) {
- if (t->speed_hz && t->speed_hz < espi->min_rate)
- return -EINVAL;
- }
-
- /*
- * Now that we own the message, let's initialize it so that it is
- * suitable for us. We use @msg->status to signal whether there was
- * error in transfer and @msg->state is used to hold pointer to the
- * current transfer (or %NULL if no active current transfer).
- */
- msg->state = NULL;
- msg->status = 0;
- msg->actual_length = 0;
-
- spin_lock_irqsave(&espi->lock, flags);
- if (!espi->running) {
- spin_unlock_irqrestore(&espi->lock, flags);
- return -ESHUTDOWN;
- }
- list_add_tail(&msg->queue, &espi->msg_queue);
- queue_work(espi->wq, &espi->msg_work);
- spin_unlock_irqrestore(&espi->lock, flags);
-
- return 0;
-}
-
-/**
* ep93xx_spi_cleanup() - cleans up master controller specific state
* @spi: SPI device to cleanup
*
@@ -409,39 +307,40 @@ static void ep93xx_spi_cleanup(struct spi_device *spi)
* ep93xx_spi_chip_setup() - configures hardware according to given @chip
* @espi: ep93xx SPI controller struct
* @chip: chip specific settings
- *
- * This function sets up the actual hardware registers with settings given in
- * @chip. Note that no validation is done so make sure that callers validate
- * settings before calling this.
+ * @speed_hz: transfer speed
+ * @bits_per_word: transfer bits_per_word
*/
-static void ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
- const struct ep93xx_spi_chip *chip)
+static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
+ const struct ep93xx_spi_chip *chip,
+ u32 speed_hz, u8 bits_per_word)
{
+ u8 dss = bits_per_word_to_dss(bits_per_word);
+ u8 div_cpsr = 0;
+ u8 div_scr = 0;
u16 cr0;
+ int err;
- cr0 = chip->div_scr << SSPCR0_SCR_SHIFT;
+ err = ep93xx_spi_calc_divisors(espi, speed_hz, &div_cpsr, &div_scr);
+ if (err)
+ return err;
+
+ cr0 = div_scr << SSPCR0_SCR_SHIFT;
cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT;
- cr0 |= chip->dss;
+ cr0 |= dss;
dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
- chip->spi->mode, chip->div_cpsr, chip->div_scr, chip->dss);
+ chip->spi->mode, div_cpsr, div_scr, dss);
dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0);
- ep93xx_spi_write_u8(espi, SSPCPSR, chip->div_cpsr);
+ ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
ep93xx_spi_write_u16(espi, SSPCR0, cr0);
-}
-
-static inline int bits_per_word(const struct ep93xx_spi *espi)
-{
- struct spi_message *msg = espi->current_msg;
- struct spi_transfer *t = msg->state;
- return t->bits_per_word;
+ return 0;
}
static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)
{
- if (bits_per_word(espi) > 8) {
+ if (t->bits_per_word > 8) {
u16 tx_val = 0;
if (t->tx_buf)
@@ -460,7 +359,7 @@ static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)
static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
{
- if (bits_per_word(espi) > 8) {
+ if (t->bits_per_word > 8) {
u16 rx_val;
rx_val = ep93xx_spi_read_u16(espi, SSPDR);
@@ -546,7 +445,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
size_t len = t->len;
int i, ret, nents;
- if (bits_per_word(espi) > 8)
+ if (t->bits_per_word > 8)
buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
else
buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -610,7 +509,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
}
if (WARN_ON(len)) {
- dev_warn(&espi->pdev->dev, "len = %d expected 0!", len);
+ dev_warn(&espi->pdev->dev, "len = %zu expected 0!", len);
return ERR_PTR(-EINVAL);
}
@@ -708,37 +607,16 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
struct spi_transfer *t)
{
struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi);
+ int err;
msg->state = t;
- /*
- * Handle any transfer specific settings if needed. We use
- * temporary chip settings here and restore original later when
- * the transfer is finished.
- */
- if (t->speed_hz || t->bits_per_word) {
- struct ep93xx_spi_chip tmp_chip = *chip;
-
- if (t->speed_hz) {
- int err;
-
- err = ep93xx_spi_calc_divisors(espi, &tmp_chip,
- t->speed_hz);
- if (err) {
- dev_err(&espi->pdev->dev,
- "failed to adjust speed\n");
- msg->status = err;
- return;
- }
- }
-
- if (t->bits_per_word)
- tmp_chip.dss = bits_per_word_to_dss(t->bits_per_word);
-
- /*
- * Set up temporary new hw settings for this transfer.
- */
- ep93xx_spi_chip_setup(espi, &tmp_chip);
+ err = ep93xx_spi_chip_setup(espi, chip, t->speed_hz, t->bits_per_word);
+ if (err) {
+ dev_err(&espi->pdev->dev,
+ "failed to setup chip for transfer\n");
+ msg->status = err;
+ return;
}
espi->rx = 0;
@@ -783,9 +661,6 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
ep93xx_spi_cs_control(msg->spi, true);
}
}
-
- if (t->speed_hz || t->bits_per_word)
- ep93xx_spi_chip_setup(espi, chip);
}
/*
@@ -838,10 +713,8 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
espi->fifo_level = 0;
/*
- * Update SPI controller registers according to spi device and assert
- * the chipselect.
+ * Assert the chipselect.
*/
- ep93xx_spi_chip_setup(espi, spi_get_ctldata(msg->spi));
ep93xx_spi_cs_control(msg->spi, true);
list_for_each_entry(t, &msg->transfers, transfer_list) {
@@ -858,50 +731,29 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
ep93xx_spi_disable(espi);
}
-#define work_to_espi(work) (container_of((work), struct ep93xx_spi, msg_work))
-
-/**
- * ep93xx_spi_work() - EP93xx SPI workqueue worker function
- * @work: work struct
- *
- * Workqueue worker function. This function is called when there are new
- * SPI messages to be processed. Message is taken out from the queue and then
- * passed to ep93xx_spi_process_message().
- *
- * After message is transferred, protocol driver is notified by calling
- * @msg->complete(). In case of error, @msg->status is set to negative error
- * number, otherwise it contains zero (and @msg->actual_length is updated).
- */
-static void ep93xx_spi_work(struct work_struct *work)
+static int ep93xx_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
{
- struct ep93xx_spi *espi = work_to_espi(work);
- struct spi_message *msg;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_transfer *t;
- spin_lock_irq(&espi->lock);
- if (!espi->running || espi->current_msg ||
- list_empty(&espi->msg_queue)) {
- spin_unlock_irq(&espi->lock);
- return;
+ /* first validate each transfer */
+ list_for_each_entry(t, &msg->transfers, transfer_list) {
+ if (t->speed_hz < espi->min_rate)
+ return -EINVAL;
}
- msg = list_first_entry(&espi->msg_queue, struct spi_message, queue);
- list_del_init(&msg->queue);
- espi->current_msg = msg;
- spin_unlock_irq(&espi->lock);
- ep93xx_spi_process_message(espi, msg);
+ msg->state = NULL;
+ msg->status = 0;
+ msg->actual_length = 0;
- /*
- * Update the current message and re-schedule ourselves if there are
- * more messages in the queue.
- */
- spin_lock_irq(&espi->lock);
+ espi->current_msg = msg;
+ ep93xx_spi_process_message(espi, msg);
espi->current_msg = NULL;
- if (espi->running && !list_empty(&espi->msg_queue))
- queue_work(espi->wq, &espi->msg_work);
- spin_unlock_irq(&espi->lock);
- /* notify the protocol driver that we are done with this message */
- msg->complete(msg->context);
+ spi_finalize_current_message(master);
+
+ return 0;
}
static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
@@ -1024,14 +876,24 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
info = pdev->dev.platform_data;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq resources\n");
+ return -EBUSY;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "unable to get iomem resource\n");
+ return -ENODEV;
+ }
+
master = spi_alloc_master(&pdev->dev, sizeof(*espi));
- if (!master) {
- dev_err(&pdev->dev, "failed to allocate spi master\n");
+ if (!master)
return -ENOMEM;
- }
master->setup = ep93xx_spi_setup;
- master->transfer = ep93xx_spi_transfer;
+ master->transfer_one_message = ep93xx_spi_transfer_one_message;
master->cleanup = ep93xx_spi_cleanup;
master->bus_num = pdev->id;
master->num_chipselect = info->num_chipselect;
@@ -1042,14 +904,13 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
espi = spi_master_get_devdata(master);
- espi->clk = clk_get(&pdev->dev, NULL);
+ espi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(espi->clk)) {
dev_err(&pdev->dev, "unable to get spi clock\n");
error = PTR_ERR(espi->clk);
goto fail_release_master;
}
- spin_lock_init(&espi->lock);
init_completion(&espi->wait);
/*
@@ -1060,55 +921,31 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
espi->min_rate = clk_get_rate(espi->clk) / (254 * 256);
espi->pdev = pdev;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- error = -EBUSY;
- dev_err(&pdev->dev, "failed to get irq resources\n");
- goto fail_put_clock;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "unable to get iomem resource\n");
- error = -ENODEV;
- goto fail_put_clock;
- }
-
espi->sspdr_phys = res->start + SSPDR;
espi->regs_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(espi->regs_base)) {
error = PTR_ERR(espi->regs_base);
- goto fail_put_clock;
+ goto fail_release_master;
}
error = devm_request_irq(&pdev->dev, irq, ep93xx_spi_interrupt,
0, "ep93xx-spi", espi);
if (error) {
dev_err(&pdev->dev, "failed to request irq\n");
- goto fail_put_clock;
+ goto fail_release_master;
}
if (info->use_dma && ep93xx_spi_setup_dma(espi))
dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n");
- espi->wq = create_singlethread_workqueue("ep93xx_spid");
- if (!espi->wq) {
- dev_err(&pdev->dev, "unable to create workqueue\n");
- error = -ENOMEM;
- goto fail_free_dma;
- }
- INIT_WORK(&espi->msg_work, ep93xx_spi_work);
- INIT_LIST_HEAD(&espi->msg_queue);
- espi->running = true;
-
/* make sure that the hardware is disabled */
ep93xx_spi_write_u8(espi, SSPCR1, 0);
error = spi_register_master(master);
if (error) {
dev_err(&pdev->dev, "failed to register SPI master\n");
- goto fail_free_queue;
+ goto fail_free_dma;
}
dev_info(&pdev->dev, "EP93xx SPI Controller at 0x%08lx irq %d\n",
@@ -1116,12 +953,8 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
return 0;
-fail_free_queue:
- destroy_workqueue(espi->wq);
fail_free_dma:
ep93xx_spi_release_dma(espi);
-fail_put_clock:
- clk_put(espi->clk);
fail_release_master:
spi_master_put(master);
@@ -1133,31 +966,7 @@ static int ep93xx_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct ep93xx_spi *espi = spi_master_get_devdata(master);
- spin_lock_irq(&espi->lock);
- espi->running = false;
- spin_unlock_irq(&espi->lock);
-
- destroy_workqueue(espi->wq);
-
- /*
- * Complete remaining messages with %-ESHUTDOWN status.
- */
- spin_lock_irq(&espi->lock);
- while (!list_empty(&espi->msg_queue)) {
- struct spi_message *msg;
-
- msg = list_first_entry(&espi->msg_queue,
- struct spi_message, queue);
- list_del_init(&msg->queue);
- msg->status = -ESHUTDOWN;
- spin_unlock_irq(&espi->lock);
- msg->complete(msg->context);
- spin_lock_irq(&espi->lock);
- }
- spin_unlock_irq(&espi->lock);
-
ep93xx_spi_release_dma(espi);
- clk_put(espi->clk);
spi_unregister_master(master);
return 0;
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
new file mode 100644
index 000000000000..6cd07d13ecab
--- /dev/null
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -0,0 +1,557 @@
+/*
+ * drivers/spi/spi-fsl-dspi.c
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Freescale DSPI driver
+ * This file contains a driver for the Freescale DSPI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#define DRIVER_NAME "fsl-dspi"
+
+#define TRAN_STATE_RX_VOID 0x01
+#define TRAN_STATE_TX_VOID 0x02
+#define TRAN_STATE_WORD_ODD_NUM 0x04
+
+#define DSPI_FIFO_SIZE 4
+
+#define SPI_MCR 0x00
+#define SPI_MCR_MASTER (1 << 31)
+#define SPI_MCR_PCSIS (0x3F << 16)
+#define SPI_MCR_CLR_TXF (1 << 11)
+#define SPI_MCR_CLR_RXF (1 << 10)
+
+#define SPI_TCR 0x08
+
+#define SPI_CTAR(x) (0x0c + (x * 4))
+#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
+#define SPI_CTAR_CPOL(x) ((x) << 26)
+#define SPI_CTAR_CPHA(x) ((x) << 25)
+#define SPI_CTAR_LSBFE(x) ((x) << 24)
+#define SPI_CTAR_PCSSCR(x) (((x) & 0x00000003) << 22)
+#define SPI_CTAR_PASC(x) (((x) & 0x00000003) << 20)
+#define SPI_CTAR_PDT(x) (((x) & 0x00000003) << 18)
+#define SPI_CTAR_PBR(x) (((x) & 0x00000003) << 16)
+#define SPI_CTAR_CSSCK(x) (((x) & 0x0000000f) << 12)
+#define SPI_CTAR_ASC(x) (((x) & 0x0000000f) << 8)
+#define SPI_CTAR_DT(x) (((x) & 0x0000000f) << 4)
+#define SPI_CTAR_BR(x) ((x) & 0x0000000f)
+
+#define SPI_CTAR0_SLAVE 0x0c
+
+#define SPI_SR 0x2c
+#define SPI_SR_EOQF 0x10000000
+
+#define SPI_RSER 0x30
+#define SPI_RSER_EOQFE 0x10000000
+
+#define SPI_PUSHR 0x34
+#define SPI_PUSHR_CONT (1 << 31)
+#define SPI_PUSHR_CTAS(x) (((x) & 0x00000007) << 28)
+#define SPI_PUSHR_EOQ (1 << 27)
+#define SPI_PUSHR_CTCNT (1 << 26)
+#define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16)
+#define SPI_PUSHR_TXDATA(x) ((x) & 0x0000ffff)
+
+#define SPI_PUSHR_SLAVE 0x34
+
+#define SPI_POPR 0x38
+#define SPI_POPR_RXDATA(x) ((x) & 0x0000ffff)
+
+#define SPI_TXFR0 0x3c
+#define SPI_TXFR1 0x40
+#define SPI_TXFR2 0x44
+#define SPI_TXFR3 0x48
+#define SPI_RXFR0 0x7c
+#define SPI_RXFR1 0x80
+#define SPI_RXFR2 0x84
+#define SPI_RXFR3 0x88
+
+#define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1)
+#define SPI_FRAME_BITS_MASK SPI_CTAR_FMSZ(0xf)
+#define SPI_FRAME_BITS_16 SPI_CTAR_FMSZ(0xf)
+#define SPI_FRAME_BITS_8 SPI_CTAR_FMSZ(0x7)
+
+#define SPI_CS_INIT 0x01
+#define SPI_CS_ASSERT 0x02
+#define SPI_CS_DROP 0x04
+
+struct chip_data {
+ u32 mcr_val;
+ u32 ctar_val;
+ u16 void_write_data;
+};
+
+struct fsl_dspi {
+ struct spi_bitbang bitbang;
+ struct platform_device *pdev;
+
+ void *base;
+ int irq;
+ struct clk *clk;
+
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ size_t len;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ char dataflags;
+ u8 cs;
+ u16 void_write_data;
+
+ wait_queue_head_t waitq;
+ u32 waitflags;
+};
+
+static inline int is_double_byte_mode(struct fsl_dspi *dspi)
+{
+ return ((readl(dspi->base + SPI_CTAR(dspi->cs)) & SPI_FRAME_BITS_MASK)
+ == SPI_FRAME_BITS(8)) ? 0 : 1;
+}
+
+static void set_bit_mode(struct fsl_dspi *dspi, unsigned char bits)
+{
+ u32 temp;
+
+ temp = readl(dspi->base + SPI_CTAR(dspi->cs));
+ temp &= ~SPI_FRAME_BITS_MASK;
+ temp |= SPI_FRAME_BITS(bits);
+ writel(temp, dspi->base + SPI_CTAR(dspi->cs));
+}
+
+static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
+ unsigned long clkrate)
+{
+ /* Valid baud rate pre-scaler values */
+ int pbr_tbl[4] = {2, 3, 5, 7};
+ int brs[16] = { 2, 4, 6, 8,
+ 16, 32, 64, 128,
+ 256, 512, 1024, 2048,
+ 4096, 8192, 16384, 32768 };
+ int temp, i = 0, j = 0;
+
+ temp = clkrate / 2 / speed_hz;
+
+ for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++)
+ for (j = 0; j < ARRAY_SIZE(brs); j++) {
+ if (pbr_tbl[i] * brs[j] >= temp) {
+ *pbr = i;
+ *br = j;
+ return;
+ }
+ }
+
+ pr_warn("Can not find valid buad rate,speed_hz is %d,clkrate is %ld\
+ ,we use the max prescaler value.\n", speed_hz, clkrate);
+ *pbr = ARRAY_SIZE(pbr_tbl) - 1;
+ *br = ARRAY_SIZE(brs) - 1;
+}
+
+static int dspi_transfer_write(struct fsl_dspi *dspi)
+{
+ int tx_count = 0;
+ int tx_word;
+ u16 d16;
+ u8 d8;
+ u32 dspi_pushr = 0;
+ int first = 1;
+
+ tx_word = is_double_byte_mode(dspi);
+
+ /* If we are in word mode, but only have a single byte to transfer
+ * then switch to byte mode temporarily. Will switch back at the
+ * end of the transfer.
+ */
+ if (tx_word && (dspi->len == 1)) {
+ dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
+ set_bit_mode(dspi, 8);
+ tx_word = 0;
+ }
+
+ while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
+ if (tx_word) {
+ if (dspi->len == 1)
+ break;
+
+ if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
+ d16 = *(u16 *)dspi->tx;
+ dspi->tx += 2;
+ } else {
+ d16 = dspi->void_write_data;
+ }
+
+ dspi_pushr = SPI_PUSHR_TXDATA(d16) |
+ SPI_PUSHR_PCS(dspi->cs) |
+ SPI_PUSHR_CTAS(dspi->cs) |
+ SPI_PUSHR_CONT;
+
+ dspi->len -= 2;
+ } else {
+ if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
+
+ d8 = *(u8 *)dspi->tx;
+ dspi->tx++;
+ } else {
+ d8 = (u8)dspi->void_write_data;
+ }
+
+ dspi_pushr = SPI_PUSHR_TXDATA(d8) |
+ SPI_PUSHR_PCS(dspi->cs) |
+ SPI_PUSHR_CTAS(dspi->cs) |
+ SPI_PUSHR_CONT;
+
+ dspi->len--;
+ }
+
+ if (dspi->len == 0 || tx_count == DSPI_FIFO_SIZE - 1) {
+ /* last transfer in the transfer */
+ dspi_pushr |= SPI_PUSHR_EOQ;
+ } else if (tx_word && (dspi->len == 1))
+ dspi_pushr |= SPI_PUSHR_EOQ;
+
+ if (first) {
+ first = 0;
+ dspi_pushr |= SPI_PUSHR_CTCNT; /* clear counter */
+ }
+
+ writel(dspi_pushr, dspi->base + SPI_PUSHR);
+ tx_count++;
+ }
+
+ return tx_count * (tx_word + 1);
+}
+
+static int dspi_transfer_read(struct fsl_dspi *dspi)
+{
+ int rx_count = 0;
+ int rx_word = is_double_byte_mode(dspi);
+ u16 d;
+ while ((dspi->rx < dspi->rx_end)
+ && (rx_count < DSPI_FIFO_SIZE)) {
+ if (rx_word) {
+ if ((dspi->rx_end - dspi->rx) == 1)
+ break;
+
+ d = SPI_POPR_RXDATA(readl(dspi->base + SPI_POPR));
+
+ if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
+ *(u16 *)dspi->rx = d;
+ dspi->rx += 2;
+
+ } else {
+ d = SPI_POPR_RXDATA(readl(dspi->base + SPI_POPR));
+ if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
+ *(u8 *)dspi->rx = d;
+ dspi->rx++;
+ }
+ rx_count++;
+ }
+
+ return rx_count;
+}
+
+static int dspi_txrx_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+ dspi->cur_transfer = t;
+ dspi->cur_chip = spi_get_ctldata(spi);
+ dspi->cs = spi->chip_select;
+ dspi->void_write_data = dspi->cur_chip->void_write_data;
+
+ dspi->dataflags = 0;
+ dspi->tx = (void *)t->tx_buf;
+ dspi->tx_end = dspi->tx + t->len;
+ dspi->rx = t->rx_buf;
+ dspi->rx_end = dspi->rx + t->len;
+ dspi->len = t->len;
+
+ if (!dspi->rx)
+ dspi->dataflags |= TRAN_STATE_RX_VOID;
+
+ if (!dspi->tx)
+ dspi->dataflags |= TRAN_STATE_TX_VOID;
+
+ writel(dspi->cur_chip->mcr_val, dspi->base + SPI_MCR);
+ writel(dspi->cur_chip->ctar_val, dspi->base + SPI_CTAR(dspi->cs));
+ writel(SPI_RSER_EOQFE, dspi->base + SPI_RSER);
+
+ if (t->speed_hz)
+ writel(dspi->cur_chip->ctar_val,
+ dspi->base + SPI_CTAR(dspi->cs));
+
+ dspi_transfer_write(dspi);
+
+ if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
+ dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
+ dspi->waitflags = 0;
+
+ return t->len - dspi->len;
+}
+
+static void dspi_chipselect(struct spi_device *spi, int value)
+{
+ struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+ u32 pushr = readl(dspi->base + SPI_PUSHR);
+
+ switch (value) {
+ case BITBANG_CS_ACTIVE:
+ pushr |= SPI_PUSHR_CONT;
+ case BITBANG_CS_INACTIVE:
+ pushr &= ~SPI_PUSHR_CONT;
+ }
+
+ writel(pushr, dspi->base + SPI_PUSHR);
+}
+
+static int dspi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct chip_data *chip;
+ struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+ unsigned char br = 0, pbr = 0, fmsz = 0;
+
+ /* Only alloc on first setup */
+ chip = spi_get_ctldata(spi);
+ if (chip == NULL) {
+ chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+ }
+
+ chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS |
+ SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF;
+ if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
+ fmsz = spi->bits_per_word - 1;
+ } else {
+ pr_err("Invalid wordsize\n");
+ kfree(chip);
+ return -ENODEV;
+ }
+
+ chip->void_write_data = 0;
+
+ hz_to_spi_baud(&pbr, &br,
+ spi->max_speed_hz, clk_get_rate(dspi->clk));
+
+ chip->ctar_val = SPI_CTAR_FMSZ(fmsz)
+ | SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0)
+ | SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0)
+ | SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0)
+ | SPI_CTAR_PBR(pbr)
+ | SPI_CTAR_BR(br);
+
+ spi_set_ctldata(spi, chip);
+
+ return 0;
+}
+
+static int dspi_setup(struct spi_device *spi)
+{
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ return dspi_setup_transfer(spi, NULL);
+}
+
+static irqreturn_t dspi_interrupt(int irq, void *dev_id)
+{
+ struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
+
+ writel(SPI_SR_EOQF, dspi->base + SPI_SR);
+
+ dspi_transfer_read(dspi);
+
+ if (!dspi->len) {
+ if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM)
+ set_bit_mode(dspi, 16);
+ dspi->waitflags = 1;
+ wake_up_interruptible(&dspi->waitq);
+ } else {
+ dspi_transfer_write(dspi);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct of_device_id fsl_dspi_dt_ids[] = {
+ { .compatible = "fsl,vf610-dspi", .data = NULL, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int dspi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct fsl_dspi *dspi = spi_master_get_devdata(master);
+
+ spi_master_suspend(master);
+ clk_disable_unprepare(dspi->clk);
+
+ return 0;
+}
+
+static int dspi_resume(struct device *dev)
+{
+
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct fsl_dspi *dspi = spi_master_get_devdata(master);
+
+ clk_prepare_enable(dspi->clk);
+ spi_master_resume(master);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops dspi_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(dspi_suspend, dspi_resume)
+};
+
+static int dspi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spi_master *master;
+ struct fsl_dspi *dspi;
+ struct resource *res;
+ int ret = 0, cs_num, bus_num;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
+ if (!master)
+ return -ENOMEM;
+
+ dspi = spi_master_get_devdata(master);
+ dspi->pdev = pdev;
+ dspi->bitbang.master = spi_master_get(master);
+ dspi->bitbang.chipselect = dspi_chipselect;
+ dspi->bitbang.setup_transfer = dspi_setup_transfer;
+ dspi->bitbang.txrx_bufs = dspi_txrx_transfer;
+ dspi->bitbang.master->setup = dspi_setup;
+ dspi->bitbang.master->dev.of_node = pdev->dev.of_node;
+
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) |
+ SPI_BPW_MASK(16);
+
+ ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
+ goto out_master_put;
+ }
+ master->num_chipselect = cs_num;
+
+ ret = of_property_read_u32(np, "bus-num", &bus_num);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "can't get bus-num\n");
+ goto out_master_put;
+ }
+ master->bus_num = bus_num;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't get platform resource\n");
+ ret = -EINVAL;
+ goto out_master_put;
+ }
+
+ dspi->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!dspi->base) {
+ ret = -EINVAL;
+ goto out_master_put;
+ }
+
+ dspi->irq = platform_get_irq(pdev, 0);
+ if (dspi->irq < 0) {
+ dev_err(&pdev->dev, "can't get platform irq\n");
+ ret = dspi->irq;
+ goto out_master_put;
+ }
+
+ ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
+ pdev->name, dspi);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
+ goto out_master_put;
+ }
+
+ dspi->clk = devm_clk_get(&pdev->dev, "dspi");
+ if (IS_ERR(dspi->clk)) {
+ ret = PTR_ERR(dspi->clk);
+ dev_err(&pdev->dev, "unable to get clock\n");
+ goto out_master_put;
+ }
+ clk_prepare_enable(dspi->clk);
+
+ init_waitqueue_head(&dspi->waitq);
+ platform_set_drvdata(pdev, dspi);
+
+ ret = spi_bitbang_start(&dspi->bitbang);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Problem registering DSPI master\n");
+ goto out_clk_put;
+ }
+
+ pr_info(KERN_INFO "Freescale DSPI master initialized\n");
+ return ret;
+
+out_clk_put:
+ clk_disable_unprepare(dspi->clk);
+out_master_put:
+ spi_master_put(master);
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int dspi_remove(struct platform_device *pdev)
+{
+ struct fsl_dspi *dspi = platform_get_drvdata(pdev);
+
+ /* Disconnect from the SPI framework */
+ spi_bitbang_stop(&dspi->bitbang);
+ spi_master_put(dspi->bitbang.master);
+
+ return 0;
+}
+
+static struct platform_driver fsl_dspi_driver = {
+ .driver.name = DRIVER_NAME,
+ .driver.of_match_table = fsl_dspi_dt_ids,
+ .driver.owner = THIS_MODULE,
+ .driver.pm = &dspi_pm,
+ .probe = dspi_probe,
+ .remove = dspi_remove,
+};
+module_platform_driver(fsl_dspi_driver);
+
+MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 7db4f43ee4d8..15323d8bd9cf 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -619,6 +619,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
static void spi_imx_chipselect(struct spi_device *spi, int is_active)
{
@@ -796,10 +797,11 @@ static int spi_imx_probe(struct platform_device *pdev)
if (!gpio_is_valid(cs_gpio))
continue;
- ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
+ ret = devm_gpio_request(&pdev->dev, spi_imx->chipselect[i],
+ DRIVER_NAME);
if (ret) {
dev_err(&pdev->dev, "can't get cs gpios\n");
- goto out_gpio_free;
+ goto out_master_put;
}
}
@@ -816,50 +818,44 @@ static int spi_imx_probe(struct platform_device *pdev)
(struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "can't get platform resource\n");
- ret = -ENOMEM;
- goto out_gpio_free;
- }
-
- if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "request_mem_region failed\n");
- ret = -EBUSY;
- goto out_gpio_free;
- }
-
- spi_imx->base = ioremap(res->start, resource_size(res));
- if (!spi_imx->base) {
- ret = -EINVAL;
- goto out_release_mem;
+ spi_imx->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spi_imx->base)) {
+ ret = PTR_ERR(spi_imx->base);
+ goto out_master_put;
}
spi_imx->irq = platform_get_irq(pdev, 0);
if (spi_imx->irq < 0) {
ret = -EINVAL;
- goto out_iounmap;
+ goto out_master_put;
}
- ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx);
+ ret = devm_request_irq(&pdev->dev, spi_imx->irq, spi_imx_isr, 0,
+ DRIVER_NAME, spi_imx);
if (ret) {
dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret);
- goto out_iounmap;
+ goto out_master_put;
}
spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(spi_imx->clk_ipg)) {
ret = PTR_ERR(spi_imx->clk_ipg);
- goto out_free_irq;
+ goto out_master_put;
}
spi_imx->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(spi_imx->clk_per)) {
ret = PTR_ERR(spi_imx->clk_per);
- goto out_free_irq;
+ goto out_master_put;
}
- clk_prepare_enable(spi_imx->clk_per);
- clk_prepare_enable(spi_imx->clk_ipg);
+ ret = clk_prepare_enable(spi_imx->clk_per);
+ if (ret)
+ goto out_master_put;
+
+ ret = clk_prepare_enable(spi_imx->clk_ipg);
+ if (ret)
+ goto out_put_per;
spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
@@ -879,47 +875,27 @@ static int spi_imx_probe(struct platform_device *pdev)
return ret;
out_clk_put:
- clk_disable_unprepare(spi_imx->clk_per);
clk_disable_unprepare(spi_imx->clk_ipg);
-out_free_irq:
- free_irq(spi_imx->irq, spi_imx);
-out_iounmap:
- iounmap(spi_imx->base);
-out_release_mem:
- release_mem_region(res->start, resource_size(res));
-out_gpio_free:
- while (--i >= 0) {
- if (gpio_is_valid(spi_imx->chipselect[i]))
- gpio_free(spi_imx->chipselect[i]);
- }
+out_put_per:
+ clk_disable_unprepare(spi_imx->clk_per);
+out_master_put:
spi_master_put(master);
- kfree(master);
+
return ret;
}
static int spi_imx_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
- int i;
spi_bitbang_stop(&spi_imx->bitbang);
writel(0, spi_imx->base + MXC_CSPICTRL);
- clk_disable_unprepare(spi_imx->clk_per);
clk_disable_unprepare(spi_imx->clk_ipg);
- free_irq(spi_imx->irq, spi_imx);
- iounmap(spi_imx->base);
-
- for (i = 0; i < master->num_chipselect; i++)
- if (gpio_is_valid(spi_imx->chipselect[i]))
- gpio_free(spi_imx->chipselect[i]);
-
+ clk_disable_unprepare(spi_imx->clk_per);
spi_master_put(master);
- release_mem_region(res->start, resource_size(res));
-
return 0;
}
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index 29fce6af5145..85581f307945 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -38,7 +38,8 @@ struct mpc512x_psc_spi {
struct mpc512x_psc_fifo __iomem *fifo;
unsigned int irq;
u8 bits_per_word;
- u32 mclk;
+ struct clk *clk_mclk;
+ u32 mclk_rate;
struct completion txisrdone;
};
@@ -72,6 +73,7 @@ static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
struct mpc52xx_psc __iomem *psc = mps->psc;
u32 sicr;
u32 ccr;
+ int speed;
u16 bclkdiv;
sicr = in_be32(&psc->sicr);
@@ -95,10 +97,10 @@ static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
ccr = in_be32(&psc->ccr);
ccr &= 0xFF000000;
- if (cs->speed_hz)
- bclkdiv = (mps->mclk / cs->speed_hz) - 1;
- else
- bclkdiv = (mps->mclk / 1000000) - 1; /* default 1MHz */
+ speed = cs->speed_hz;
+ if (!speed)
+ speed = 1000000; /* default 1MHz */
+ bclkdiv = (mps->mclk_rate / speed) - 1;
ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
out_be32(&psc->ccr, ccr);
@@ -386,19 +388,11 @@ static int mpc512x_psc_spi_port_config(struct spi_master *master,
{
struct mpc52xx_psc __iomem *psc = mps->psc;
struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
- struct clk *spiclk;
- int ret = 0;
- char name[32];
u32 sicr;
u32 ccr;
+ int speed;
u16 bclkdiv;
- sprintf(name, "psc%d_mclk", master->bus_num);
- spiclk = clk_get(&master->dev, name);
- clk_enable(spiclk);
- mps->mclk = clk_get_rate(spiclk);
- clk_put(spiclk);
-
/* Reset the PSC into a known state */
out_8(&psc->command, MPC52xx_PSC_RST_RX);
out_8(&psc->command, MPC52xx_PSC_RST_TX);
@@ -425,7 +419,8 @@ static int mpc512x_psc_spi_port_config(struct spi_master *master,
ccr = in_be32(&psc->ccr);
ccr &= 0xFF000000;
- bclkdiv = (mps->mclk / 1000000) - 1; /* default 1MHz */
+ speed = 1000000; /* default 1MHz */
+ bclkdiv = (mps->mclk_rate / speed) - 1;
ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
out_be32(&psc->ccr, ccr);
@@ -445,7 +440,7 @@ static int mpc512x_psc_spi_port_config(struct spi_master *master,
mps->bits_per_word = 8;
- return ret;
+ return 0;
}
static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
@@ -479,6 +474,9 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
struct spi_master *master;
int ret;
void *tempp;
+ int psc_num;
+ char clk_name[16];
+ struct clk *clk;
master = spi_alloc_master(dev, sizeof *mps);
if (master == NULL)
@@ -521,16 +519,29 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
goto free_master;
init_completion(&mps->txisrdone);
+ psc_num = master->bus_num;
+ snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
+ clk = devm_clk_get(dev, clk_name);
+ if (IS_ERR(clk))
+ goto free_irq;
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto free_irq;
+ mps->clk_mclk = clk;
+ mps->mclk_rate = clk_get_rate(clk);
+
ret = mpc512x_psc_spi_port_config(master, mps);
if (ret < 0)
- goto free_irq;
+ goto free_clock;
ret = spi_register_master(master);
if (ret < 0)
- goto free_irq;
+ goto free_clock;
return ret;
+free_clock:
+ clk_disable_unprepare(mps->clk_mclk);
free_irq:
free_irq(mps->irq, mps);
free_master:
@@ -547,6 +558,7 @@ static int mpc512x_psc_spi_do_remove(struct device *dev)
struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
spi_unregister_master(master);
+ clk_disable_unprepare(mps->clk_mclk);
free_irq(mps->irq, mps);
if (mps->psc)
iounmap(mps->psc);
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 424d38e59421..de7b1141b90f 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -67,13 +67,8 @@ static int mxs_spi_setup_transfer(struct spi_device *dev,
{
struct mxs_spi *spi = spi_master_get_devdata(dev->master);
struct mxs_ssp *ssp = &spi->ssp;
- uint8_t bits_per_word;
uint32_t hz = 0;
- bits_per_word = dev->bits_per_word;
- if (t && t->bits_per_word)
- bits_per_word = t->bits_per_word;
-
hz = dev->max_speed_hz;
if (t && t->speed_hz)
hz = min(hz, t->speed_hz);
@@ -513,7 +508,7 @@ static int mxs_spi_probe(struct platform_device *pdev)
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_err = platform_get_irq(pdev, 0);
- if (!iores || irq_err < 0)
+ if (irq_err < 0)
return -EINVAL;
base = devm_ioremap_resource(&pdev->dev, iores);
@@ -563,25 +558,31 @@ static int mxs_spi_probe(struct platform_device *pdev)
goto out_master_free;
}
- clk_prepare_enable(ssp->clk);
+ ret = clk_prepare_enable(ssp->clk);
+ if (ret)
+ goto out_dma_release;
+
clk_set_rate(ssp->clk, clk_freq);
ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
- stmp_reset_block(ssp->base);
+ ret = stmp_reset_block(ssp->base);
+ if (ret)
+ goto out_disable_clk;
platform_set_drvdata(pdev, master);
ret = spi_register_master(master);
if (ret) {
dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
- goto out_free_dma;
+ goto out_disable_clk;
}
return 0;
-out_free_dma:
- dma_release_channel(ssp->dmach);
+out_disable_clk:
clk_disable_unprepare(ssp->clk);
+out_dma_release:
+ dma_release_channel(ssp->dmach);
out_master_free:
spi_master_put(master);
return ret;
@@ -598,11 +599,8 @@ static int mxs_spi_remove(struct platform_device *pdev)
ssp = &spi->ssp;
spi_unregister_master(master);
-
- dma_release_channel(ssp->dmach);
-
clk_disable_unprepare(ssp->clk);
-
+ dma_release_channel(ssp->dmach);
spi_master_put(master);
return 0;
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index ee0136631c00..b21f8f20060a 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -174,17 +174,6 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw)
spin_unlock_irqrestore(&hw->lock, flags);
}
-static int nuc900_spi_setupxfer(struct spi_device *spi,
- struct spi_transfer *t)
-{
- return 0;
-}
-
-static int nuc900_spi_setup(struct spi_device *spi)
-{
- return 0;
-}
-
static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
@@ -377,10 +366,8 @@ static int nuc900_spi_probe(struct platform_device *pdev)
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
- hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
hw->bitbang.chipselect = nuc900_spi_chipsel;
hw->bitbang.txrx_bufs = nuc900_spi_txrx;
- hw->bitbang.master->setup = nuc900_spi_setup;
hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (hw->res == NULL) {
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index 58deb79d046b..d36ba907743d 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -315,15 +315,11 @@ static int tiny_spi_probe(struct platform_device *pdev)
/* find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- goto exit_busy;
- if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
- pdev->name))
- goto exit_busy;
- hw->base = devm_ioremap_nocache(&pdev->dev, res->start,
- resource_size(res));
- if (!hw->base)
- goto exit_busy;
+ hw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(hw->base)) {
+ err = PTR_ERR(hw->base);
+ goto exit;
+ }
/* irq is optional */
hw->irq = platform_get_irq(pdev, 0);
if (hw->irq >= 0) {
@@ -337,8 +333,10 @@ static int tiny_spi_probe(struct platform_device *pdev)
if (platp) {
hw->gpio_cs_count = platp->gpio_cs_count;
hw->gpio_cs = platp->gpio_cs;
- if (platp->gpio_cs_count && !platp->gpio_cs)
- goto exit_busy;
+ if (platp->gpio_cs_count && !platp->gpio_cs) {
+ err = -EBUSY;
+ goto exit;
+ }
hw->freq = platp->freq;
hw->baudwidth = platp->baudwidth;
} else {
@@ -365,8 +363,6 @@ static int tiny_spi_probe(struct platform_device *pdev)
exit_gpio:
while (i-- > 0)
gpio_free(hw->gpio_cs[i]);
-exit_busy:
- err = -EBUSY;
exit:
spi_master_put(master);
return err;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 5d90bebaa0fa..d1bae77f157c 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/clk.h>
+#include <linux/sizes.h>
#include <asm/unaligned.h>
#define DRIVER_NAME "orion_spi"
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 09a942852593..fb56fcfdf65e 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -233,21 +233,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
return 0;
}
-static int xilinx_spi_setup(struct spi_device *spi)
-{
- /* always return 0, we can not check the number of bits.
- * There are cases when SPI setup is called before any driver is
- * there, in that case the SPI core defaults to 8 bits, which we
- * do not support in some cases. But if we return an error, the
- * SPI device would not be registered and no driver can get hold of it
- * When the driver is there, it will call SPI setup again with the
- * correct number of bits per transfer.
- * If a driver setups with the wrong bit number, it will fail when
- * it tries to do a transfer
- */
- return 0;
-}
-
static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
{
u8 sr;
@@ -375,7 +360,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
xspi->bitbang.chipselect = xilinx_spi_chipselect;
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
- xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done);
if (!request_mem_region(mem->start, resource_size(mem),
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 978dda2c5239..7ed5c147c073 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -774,7 +774,7 @@ static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
msg->status = -EINPROGRESS;
list_add_tail(&msg->queue, &master->queue);
- if (master->running && !master->busy)
+ if (!master->busy)
queue_kthread_work(&master->kworker, &master->pump_messages);
spin_unlock_irqrestore(&master->queue_lock, flags);
@@ -1169,7 +1169,7 @@ int spi_register_master(struct spi_master *master)
else {
status = spi_master_initialize_queue(master);
if (status) {
- device_unregister(&master->dev);
+ device_del(&master->dev);
goto done;
}
}
@@ -1351,6 +1351,11 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
struct spi_master *master = spi->master;
struct spi_transfer *xfer;
+ if (list_empty(&message->transfers))
+ return -EINVAL;
+ if (!message->complete)
+ return -EINVAL;
+
/* Half-duplex links include original MicroWire, and ones with
* only one data pin like SPI_3WIRE (switches direction) or where
* either MOSI or MISO is missing. They can also be caused by
@@ -1375,10 +1380,16 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
* it is not set for this transfer.
*/
list_for_each_entry(xfer, &message->transfers, transfer_list) {
+ message->frame_length += xfer->len;
if (!xfer->bits_per_word)
xfer->bits_per_word = spi->bits_per_word;
- if (!xfer->speed_hz)
+ if (!xfer->speed_hz) {
xfer->speed_hz = spi->max_speed_hz;
+ if (master->max_speed_hz &&
+ xfer->speed_hz > master->max_speed_hz)
+ xfer->speed_hz = master->max_speed_hz;
+ }
+
if (master->bits_per_word_mask) {
/* Only 32 bits fit in the mask */
if (xfer->bits_per_word > 32)
@@ -1387,6 +1398,13 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
BIT(xfer->bits_per_word - 1)))
return -EINVAL;
}
+
+ if (xfer->speed_hz && master->min_speed_hz &&
+ xfer->speed_hz < master->min_speed_hz)
+ return -EINVAL;
+ if (xfer->speed_hz && master->max_speed_hz &&
+ xfer->speed_hz > master->max_speed_hz)
+ return -EINVAL;
}
message->spi = spi;
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-22 12:18:38 +0000