diff options
Diffstat (limited to 'drivers/scsi/ufs/ufs-qcom.c')
| -rw-r--r-- | drivers/scsi/ufs/ufs-qcom.c | 114 |
1 files changed, 70 insertions, 44 deletions
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 3aeadb14aae1..de9d3f56b58c 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -16,6 +16,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> +#include <linux/reset-controller.h> #include "ufshcd.h" #include "ufshcd-pltfrm.h" @@ -49,6 +50,11 @@ static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, u32 clk_cycles); +static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) +{ + return container_of(rcd, struct ufs_qcom_host, rcdev); +} + static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len, const char *prefix, void *priv) { @@ -255,11 +261,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) if (is_rate_B) phy_set_mode(phy, PHY_MODE_UFS_HS_B); - /* Assert PHY reset and apply PHY calibration values */ - ufs_qcom_assert_reset(hba); - /* provide 1ms delay to let the reset pulse propagate */ - usleep_range(1000, 1100); - /* phy initialization - calibrate the phy */ ret = phy_init(phy); if (ret) { @@ -268,15 +269,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) goto out; } - /* De-assert PHY reset and start serdes */ - ufs_qcom_deassert_reset(hba); - - /* - * after reset deassertion, phy will need all ref clocks, - * voltage, current to settle down before starting serdes. - */ - usleep_range(1000, 1100); - /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); if (ret) { @@ -290,7 +282,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) return 0; out_disable_phy: - ufs_qcom_assert_reset(hba); phy_exit(phy); out: return ret; @@ -554,21 +545,10 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) ufs_qcom_disable_lane_clks(host); phy_power_off(phy); - /* Assert PHY soft reset */ - ufs_qcom_assert_reset(hba); - goto out; - } - - /* - * If UniPro link is not active, PHY ref_clk, main PHY analog power - * rail and low noise analog power rail for PLL can be switched off. - */ - if (!ufs_qcom_is_link_active(hba)) { + } else if (!ufs_qcom_is_link_active(hba)) { ufs_qcom_disable_lane_clks(host); - phy_power_off(phy); } -out: return ret; } @@ -578,21 +558,26 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) struct phy *phy = host->generic_phy; int err; - err = phy_power_on(phy); - if (err) { - dev_err(hba->dev, "%s: failed enabling regs, err = %d\n", - __func__, err); - goto out; - } + if (ufs_qcom_is_link_off(hba)) { + err = phy_power_on(phy); + if (err) { + dev_err(hba->dev, "%s: failed PHY power on: %d\n", + __func__, err); + return err; + } - err = ufs_qcom_enable_lane_clks(host); - if (err) - goto out; + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; - hba->is_sys_suspended = false; + } else if (!ufs_qcom_is_link_active(hba)) { + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; + } -out: - return err; + hba->is_sys_suspended = false; + return 0; } struct ufs_qcom_dev_params { @@ -1118,8 +1103,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, return 0; if (on && (status == POST_CHANGE)) { - phy_power_on(host->generic_phy); - /* enable the device ref clock for HS mode*/ if (ufshcd_is_hs_mode(&hba->pwr_info)) ufs_qcom_dev_ref_clk_ctrl(host, true); @@ -1131,9 +1114,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, if (!ufs_qcom_is_link_active(hba)) { /* disable device ref_clk */ ufs_qcom_dev_ref_clk_ctrl(host, false); - - /* powering off PHY during aggressive clk gating */ - phy_power_off(host->generic_phy); } vote = host->bus_vote.min_bw_vote; @@ -1147,6 +1127,41 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, return err; } +static int +ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); + + /* Currently this code only knows about a single reset. */ + WARN_ON(id); + ufs_qcom_assert_reset(host->hba); + /* provide 1ms delay to let the reset pulse propagate. */ + usleep_range(1000, 1100); + return 0; +} + +static int +ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); + + /* Currently this code only knows about a single reset. */ + WARN_ON(id); + ufs_qcom_deassert_reset(host->hba); + + /* + * after reset deassertion, phy will need all ref clocks, + * voltage, current to settle down before starting serdes. + */ + usleep_range(1000, 1100); + return 0; +} + +static const struct reset_control_ops ufs_qcom_reset_ops = { + .assert = ufs_qcom_reset_assert, + .deassert = ufs_qcom_reset_deassert, +}; + #define ANDROID_BOOT_DEV_MAX 30 static char android_boot_dev[ANDROID_BOOT_DEV_MAX]; @@ -1191,6 +1206,17 @@ static int ufs_qcom_init(struct ufs_hba *hba) host->hba = hba; ufshcd_set_variant(hba, host); + /* Fire up the reset controller. Failure here is non-fatal. */ + host->rcdev.of_node = dev->of_node; + host->rcdev.ops = &ufs_qcom_reset_ops; + host->rcdev.owner = dev->driver->owner; + host->rcdev.nr_resets = 1; + err = devm_reset_controller_register(dev, &host->rcdev); + if (err) { + dev_warn(dev, "Failed to register reset controller\n"); + err = 0; + } + /* * voting/devoting device ref_clk source is time consuming hence * skip devoting it during aggressive clock gating. This clock |