diff options
Diffstat (limited to 'drivers/regulator/anatop-regulator.c')
| -rw-r--r-- | drivers/regulator/anatop-regulator.c | 63 |
1 files changed, 27 insertions, 36 deletions
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index d9d8155ed8cb..754739d004e5 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -23,18 +23,10 @@ #define LDO_FET_FULL_ON 0x1f struct anatop_regulator { - u32 control_reg; - struct regmap *anatop; - int vol_bit_shift; - int vol_bit_width; u32 delay_reg; int delay_bit_shift; int delay_bit_width; - int min_bit_val; - int min_voltage; - int max_voltage; struct regulator_desc rdesc; - struct regulator_init_data *initdata; bool bypass; int sel; }; @@ -55,7 +47,7 @@ static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg, * to calculate how many steps LDO need to * ramp up, and how much delay needed. (us) */ - regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val); + regmap_read(reg->regmap, anatop_reg->delay_reg, &val); val = (val >> anatop_reg->delay_bit_shift) & ((1 << anatop_reg->delay_bit_width) - 1); ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES << @@ -170,6 +162,13 @@ static int anatop_regulator_probe(struct platform_device *pdev) struct anatop_regulator *sreg; struct regulator_init_data *initdata; struct regulator_config config = { }; + struct regmap *regmap; + u32 control_reg; + u32 vol_bit_shift; + u32 vol_bit_width; + u32 min_bit_val; + u32 min_voltage; + u32 max_voltage; int ret = 0; u32 val; @@ -192,48 +191,41 @@ static int anatop_regulator_probe(struct platform_device *pdev) return -ENOMEM; initdata->supply_regulator = "vin"; - sreg->initdata = initdata; anatop_np = of_get_parent(np); if (!anatop_np) return -ENODEV; - sreg->anatop = syscon_node_to_regmap(anatop_np); + regmap = syscon_node_to_regmap(anatop_np); of_node_put(anatop_np); - if (IS_ERR(sreg->anatop)) - return PTR_ERR(sreg->anatop); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); - ret = of_property_read_u32(np, "anatop-reg-offset", - &sreg->control_reg); + ret = of_property_read_u32(np, "anatop-reg-offset", &control_reg); if (ret) { dev_err(dev, "no anatop-reg-offset property set\n"); return ret; } - ret = of_property_read_u32(np, "anatop-vol-bit-width", - &sreg->vol_bit_width); + ret = of_property_read_u32(np, "anatop-vol-bit-width", &vol_bit_width); if (ret) { dev_err(dev, "no anatop-vol-bit-width property set\n"); return ret; } - ret = of_property_read_u32(np, "anatop-vol-bit-shift", - &sreg->vol_bit_shift); + ret = of_property_read_u32(np, "anatop-vol-bit-shift", &vol_bit_shift); if (ret) { dev_err(dev, "no anatop-vol-bit-shift property set\n"); return ret; } - ret = of_property_read_u32(np, "anatop-min-bit-val", - &sreg->min_bit_val); + ret = of_property_read_u32(np, "anatop-min-bit-val", &min_bit_val); if (ret) { dev_err(dev, "no anatop-min-bit-val property set\n"); return ret; } - ret = of_property_read_u32(np, "anatop-min-voltage", - &sreg->min_voltage); + ret = of_property_read_u32(np, "anatop-min-voltage", &min_voltage); if (ret) { dev_err(dev, "no anatop-min-voltage property set\n"); return ret; } - ret = of_property_read_u32(np, "anatop-max-voltage", - &sreg->max_voltage); + ret = of_property_read_u32(np, "anatop-max-voltage", &max_voltage); if (ret) { dev_err(dev, "no anatop-max-voltage property set\n"); return ret; @@ -247,24 +239,23 @@ static int anatop_regulator_probe(struct platform_device *pdev) of_property_read_u32(np, "anatop-delay-bit-shift", &sreg->delay_bit_shift); - rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1 - + sreg->min_bit_val; - rdesc->min_uV = sreg->min_voltage; + rdesc->n_voltages = (max_voltage - min_voltage) / 25000 + 1 + + min_bit_val; + rdesc->min_uV = min_voltage; rdesc->uV_step = 25000; - rdesc->linear_min_sel = sreg->min_bit_val; - rdesc->vsel_reg = sreg->control_reg; - rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) << - sreg->vol_bit_shift; + rdesc->linear_min_sel = min_bit_val; + rdesc->vsel_reg = control_reg; + rdesc->vsel_mask = ((1 << vol_bit_width) - 1) << vol_bit_shift; rdesc->min_dropout_uV = 125000; config.dev = &pdev->dev; config.init_data = initdata; config.driver_data = sreg; config.of_node = pdev->dev.of_node; - config.regmap = sreg->anatop; + config.regmap = regmap; /* Only core regulators have the ramp up delay configuration. */ - if (sreg->control_reg && sreg->delay_bit_width) { + if (control_reg && sreg->delay_bit_width) { rdesc->ops = &anatop_core_rops; ret = regmap_read(config.regmap, rdesc->vsel_reg, &val); @@ -273,7 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) return ret; } - sreg->sel = (val & rdesc->vsel_mask) >> sreg->vol_bit_shift; + sreg->sel = (val & rdesc->vsel_mask) >> vol_bit_shift; if (sreg->sel == LDO_FET_FULL_ON) { sreg->sel = 0; sreg->bypass = true; @@ -306,7 +297,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) anatop_rops.disable = regulator_disable_regmap; anatop_rops.is_enabled = regulator_is_enabled_regmap; - rdesc->enable_reg = sreg->control_reg; + rdesc->enable_reg = control_reg; rdesc->enable_mask = BIT(enable_bit); } } |