diff options
Diffstat (limited to 'drivers/net/dsa/bcm_sf2.c')
| -rw-r--r-- | drivers/net/dsa/bcm_sf2.c | 17 |
1 files changed, 11 insertions, 6 deletions
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 5ee8103b8e9c..ba5d546d06aa 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -114,7 +114,10 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) /* Force link status for IMP port */ reg = core_readl(priv, offset); reg |= (MII_SW_OR | LINK_STS); - reg &= ~GMII_SPEED_UP_2G; + if (priv->type == BCM4908_DEVICE_ID) + reg |= GMII_SPEED_UP_2G; + else + reg &= ~GMII_SPEED_UP_2G; core_writel(priv, reg, offset); /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ @@ -406,7 +409,7 @@ static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) /* The watchdog reset does not work on 7278, we need to hit the * "external" reset line through the reset controller. */ - if (priv->type == BCM7278_DEVICE_ID && !IS_ERR(priv->rcdev)) { + if (priv->type == BCM7278_DEVICE_ID) { ret = reset_control_assert(priv->rcdev); if (ret) return ret; @@ -585,8 +588,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port) * in bits 15:8 and the patch level in bits 7:0 which is exactly what * the REG_PHY_REVISION register layout is. */ - - return priv->hw_params.gphy_rev; + if (priv->int_phy_mask & BIT(port)) + return priv->hw_params.gphy_rev; + else + return 0; } static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port, @@ -1265,7 +1270,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev, "switch"); - if (PTR_ERR(priv->rcdev) == -EPROBE_DEFER) + if (IS_ERR(priv->rcdev)) return PTR_ERR(priv->rcdev); /* Auto-detection using standard registers will not work, so @@ -1426,7 +1431,7 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) bcm_sf2_mdio_unregister(priv); clk_disable_unprepare(priv->clk_mdiv); clk_disable_unprepare(priv->clk); - if (priv->type == BCM7278_DEVICE_ID && !IS_ERR(priv->rcdev)) + if (priv->type == BCM7278_DEVICE_ID) reset_control_assert(priv->rcdev); return 0; |