11 files changed, 490 insertions, 547 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a3958c63d7d5..96ee26c555e0 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
-config KEYBOARD_CAP1106
-	tristate "Microchip CAP1106 touch sensor"
+config KEYBOARD_CAP11XX
+	tristate "Microchip CAP11XX based touch sensors"
 	depends on OF && I2C
 	select REGMAP_I2C
 	help
-	  Say Y here to enable the CAP1106 touch sensor driver.
+	  Say Y here to enable the CAP11XX touch sensor driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cap1106.
+	  module will be called cap11xx.
 
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 0a3345634d79..febafa527eb6 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
-obj-$(CONFIG_KEYBOARD_CAP1106)		+= cap1106.o
+obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index d3b8c58fcfdb..e04a3b4e55d6 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -45,6 +45,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Amiga keyboard driver");
 MODULE_LICENSE("GPL");
 
+#ifdef CONFIG_HW_CONSOLE
 static unsigned char amikbd_keycode[0x78] __initdata = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
@@ -144,6 +145,32 @@ static unsigned char amikbd_keycode[0x78] __initdata = {
 	[103]	 = KEY_RIGHTMETA
 };
 
+static void __init amikbd_init_console_keymaps(void)
+{
+	/* We can spare 512 bytes on stack for temp_map in init path. */
+	unsigned short temp_map[NR_KEYS];
+	int i, j;
+
+	for (i = 0; i < MAX_NR_KEYMAPS; i++) {
+		if (!key_maps[i])
+			continue;
+		memset(temp_map, 0, sizeof(temp_map));
+		for (j = 0; j < 0x78; j++) {
+			if (!amikbd_keycode[j])
+				continue;
+			temp_map[j] = key_maps[i][amikbd_keycode[j]];
+		}
+		for (j = 0; j < NR_KEYS; j++) {
+			if (!temp_map[j])
+				temp_map[j] = 0xf200;
+		}
+		memcpy(key_maps[i], temp_map, sizeof(temp_map));
+	}
+}
+#else /* !CONFIG_HW_CONSOLE */
+static inline void amikbd_init_console_keymaps(void) {}
+#endif /* !CONFIG_HW_CONSOLE */
+
 static const char *amikbd_messages[8] = {
 	[0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
 	[1] = KERN_WARNING "amikbd: keyboard lost sync\n",
@@ -186,7 +213,7 @@ static irqreturn_t amikbd_interrupt(int irq, void *data)
 static int __init amikbd_probe(struct platform_device *pdev)
 {
 	struct input_dev *dev;
-	int i, j, err;
+	int i, err;
 
 	dev = input_allocate_device();
 	if (!dev) {
@@ -207,22 +234,8 @@ static int __init amikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < 0x78; i++)
 		set_bit(i, dev->keybit);
 
-	for (i = 0; i < MAX_NR_KEYMAPS; i++) {
-		static u_short temp_map[NR_KEYS] __initdata;
-		if (!key_maps[i])
-			continue;
-		memset(temp_map, 0, sizeof(temp_map));
-		for (j = 0; j < 0x78; j++) {
-			if (!amikbd_keycode[j])
-				continue;
-			temp_map[j] = key_maps[i][amikbd_keycode[j]];
-		}
-		for (j = 0; j < NR_KEYS; j++) {
-			if (!temp_map[j])
-				temp_map[j] = 0xf200;
-		}
-		memcpy(key_maps[i], temp_map, sizeof(temp_map));
-	}
+	amikbd_init_console_keymaps();
+
 	ciaa.cra &= ~0x41;	 /* serial data in, turn off TA */
 	err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
 			  dev);
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 6f5d79569136..e27a25892db4 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -456,8 +456,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 
 	keycode = atkbd->keycode[code];
 
-	if (keycode != ATKBD_KEY_NULL)
-		input_event(dev, EV_MSC, MSC_SCAN, code);
+	if (!(atkbd->release && test_bit(code, atkbd->force_release_mask)))
+		if (keycode != ATKBD_KEY_NULL)
+			input_event(dev, EV_MSC, MSC_SCAN, code);
 
 	switch (keycode) {
 	case ATKBD_KEY_NULL:
@@ -511,6 +512,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 		input_sync(dev);
 
 		if (value && test_bit(code, atkbd->force_release_mask)) {
+			input_event(dev, EV_MSC, MSC_SCAN, code);
 			input_report_key(dev, keycode, 0);
 			input_sync(dev);
 		}
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
deleted file mode 100644
index d70b65a14ced..000000000000
--- a/drivers/input/keyboard/cap1106.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor
- *
- * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106
- *
- * (c) 2014 Daniel Mack <linux@zonque.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/of_irq.h>
-#include <linux/regmap.h>
-#include <linux/i2c.h>
-#include <linux/gpio/consumer.h>
-
-#define CAP1106_REG_MAIN_CONTROL	0x00
-#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
-#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
-#define CAP1106_REG_MAIN_CONTROL_DLSEEP		BIT(4)
-#define CAP1106_REG_GENERAL_STATUS	0x02
-#define CAP1106_REG_SENSOR_INPUT	0x03
-#define CAP1106_REG_NOISE_FLAG_STATUS	0x0a
-#define CAP1106_REG_SENOR_DELTA(X)	(0x10 + (X))
-#define CAP1106_REG_SENSITIVITY_CONTROL	0x1f
-#define CAP1106_REG_CONFIG		0x20
-#define CAP1106_REG_SENSOR_ENABLE	0x21
-#define CAP1106_REG_SENSOR_CONFIG	0x22
-#define CAP1106_REG_SENSOR_CONFIG2	0x23
-#define CAP1106_REG_SAMPLING_CONFIG	0x24
-#define CAP1106_REG_CALIBRATION		0x26
-#define CAP1106_REG_INT_ENABLE		0x27
-#define CAP1106_REG_REPEAT_RATE		0x28
-#define CAP1106_REG_MT_CONFIG		0x2a
-#define CAP1106_REG_MT_PATTERN_CONFIG	0x2b
-#define CAP1106_REG_MT_PATTERN		0x2d
-#define CAP1106_REG_RECALIB_CONFIG	0x2f
-#define CAP1106_REG_SENSOR_THRESH(X)	(0x30 + (X))
-#define CAP1106_REG_SENSOR_NOISE_THRESH	0x38
-#define CAP1106_REG_STANDBY_CHANNEL	0x40
-#define CAP1106_REG_STANDBY_CONFIG	0x41
-#define CAP1106_REG_STANDBY_SENSITIVITY	0x42
-#define CAP1106_REG_STANDBY_THRESH	0x43
-#define CAP1106_REG_CONFIG2		0x44
-#define CAP1106_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
-#define CAP1106_REG_SENSOR_CALIB	(0xb1 + (X))
-#define CAP1106_REG_SENSOR_CALIB_LSB1	0xb9
-#define CAP1106_REG_SENSOR_CALIB_LSB2	0xba
-#define CAP1106_REG_PRODUCT_ID		0xfd
-#define CAP1106_REG_MANUFACTURER_ID	0xfe
-#define CAP1106_REG_REVISION		0xff
-
-#define CAP1106_NUM_CHN 6
-#define CAP1106_PRODUCT_ID	0x55
-#define CAP1106_MANUFACTURER_ID	0x5d
-
-struct cap1106_priv {
-	struct regmap *regmap;
-	struct input_dev *idev;
-
-	/* config */
-	unsigned short keycodes[CAP1106_NUM_CHN];
-};
-
-static const struct reg_default cap1106_reg_defaults[] = {
-	{ CAP1106_REG_MAIN_CONTROL,		0x00 },
-	{ CAP1106_REG_GENERAL_STATUS,		0x00 },
-	{ CAP1106_REG_SENSOR_INPUT,		0x00 },
-	{ CAP1106_REG_NOISE_FLAG_STATUS,	0x00 },
-	{ CAP1106_REG_SENSITIVITY_CONTROL,	0x2f },
-	{ CAP1106_REG_CONFIG,			0x20 },
-	{ CAP1106_REG_SENSOR_ENABLE,		0x3f },
-	{ CAP1106_REG_SENSOR_CONFIG,		0xa4 },
-	{ CAP1106_REG_SENSOR_CONFIG2,		0x07 },
-	{ CAP1106_REG_SAMPLING_CONFIG,		0x39 },
-	{ CAP1106_REG_CALIBRATION,		0x00 },
-	{ CAP1106_REG_INT_ENABLE,		0x3f },
-	{ CAP1106_REG_REPEAT_RATE,		0x3f },
-	{ CAP1106_REG_MT_CONFIG,		0x80 },
-	{ CAP1106_REG_MT_PATTERN_CONFIG,	0x00 },
-	{ CAP1106_REG_MT_PATTERN,		0x3f },
-	{ CAP1106_REG_RECALIB_CONFIG,		0x8a },
-	{ CAP1106_REG_SENSOR_THRESH(0),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(1),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(2),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(3),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(4),		0x40 },
-	{ CAP1106_REG_SENSOR_THRESH(5),		0x40 },
-	{ CAP1106_REG_SENSOR_NOISE_THRESH,	0x01 },
-	{ CAP1106_REG_STANDBY_CHANNEL,		0x00 },
-	{ CAP1106_REG_STANDBY_CONFIG,		0x39 },
-	{ CAP1106_REG_STANDBY_SENSITIVITY,	0x02 },
-	{ CAP1106_REG_STANDBY_THRESH,		0x40 },
-	{ CAP1106_REG_CONFIG2,			0x40 },
-	{ CAP1106_REG_SENSOR_CALIB_LSB1,	0x00 },
-	{ CAP1106_REG_SENSOR_CALIB_LSB2,	0x00 },
-};
-
-static bool cap1106_volatile_reg(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case CAP1106_REG_MAIN_CONTROL:
-	case CAP1106_REG_SENSOR_INPUT:
-	case CAP1106_REG_SENOR_DELTA(0):
-	case CAP1106_REG_SENOR_DELTA(1):
-	case CAP1106_REG_SENOR_DELTA(2):
-	case CAP1106_REG_SENOR_DELTA(3):
-	case CAP1106_REG_SENOR_DELTA(4):
-	case CAP1106_REG_SENOR_DELTA(5):
-	case CAP1106_REG_PRODUCT_ID:
-	case CAP1106_REG_MANUFACTURER_ID:
-	case CAP1106_REG_REVISION:
-		return true;
-	}
-
-	return false;
-}
-
-static const struct regmap_config cap1106_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = CAP1106_REG_REVISION,
-	.reg_defaults = cap1106_reg_defaults,
-
-	.num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults),
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = cap1106_volatile_reg,
-};
-
-static irqreturn_t cap1106_thread_func(int irq_num, void *data)
-{
-	struct cap1106_priv *priv = data;
-	unsigned int status;
-	int ret, i;
-
-	/*
-	 * Deassert interrupt. This needs to be done before reading the status
-	 * registers, which will not carry valid values otherwise.
-	 */
-	ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0);
-	if (ret < 0)
-		goto out;
-
-	ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status);
-	if (ret < 0)
-		goto out;
-
-	for (i = 0; i < CAP1106_NUM_CHN; i++)
-		input_report_key(priv->idev, priv->keycodes[i],
-				 status & (1 << i));
-
-	input_sync(priv->idev);
-
-out:
-	return IRQ_HANDLED;
-}
-
-static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep)
-{
-	return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
-				  CAP1106_REG_MAIN_CONTROL_DLSEEP,
-				  sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0);
-}
-
-static int cap1106_input_open(struct input_dev *idev)
-{
-	struct cap1106_priv *priv = input_get_drvdata(idev);
-
-	return cap1106_set_sleep(priv, false);
-}
-
-static void cap1106_input_close(struct input_dev *idev)
-{
-	struct cap1106_priv *priv = input_get_drvdata(idev);
-
-	cap1106_set_sleep(priv, true);
-}
-
-static int cap1106_i2c_probe(struct i2c_client *i2c_client,
-			     const struct i2c_device_id *id)
-{
-	struct device *dev = &i2c_client->dev;
-	struct cap1106_priv *priv;
-	struct device_node *node;
-	int i, error, irq, gain = 0;
-	unsigned int val, rev;
-	u32 gain32, keycodes[CAP1106_NUM_CHN];
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config);
-	if (IS_ERR(priv->regmap))
-		return PTR_ERR(priv->regmap);
-
-	error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val);
-	if (error)
-		return error;
-
-	if (val != CAP1106_PRODUCT_ID) {
-		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
-			val, CAP1106_PRODUCT_ID);
-		return -ENODEV;
-	}
-
-	error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val);
-	if (error)
-		return error;
-
-	if (val != CAP1106_MANUFACTURER_ID) {
-		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
-			val, CAP1106_MANUFACTURER_ID);
-		return -ENODEV;
-	}
-
-	error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev);
-	if (error < 0)
-		return error;
-
-	dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev);
-	i2c_set_clientdata(i2c_client, priv);
-	node = dev->of_node;
-
-	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
-		if (is_power_of_2(gain32) && gain32 <= 8)
-			gain = ilog2(gain32);
-		else
-			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
-	}
-
-	BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
-
-	/* Provide some useful defaults */
-	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-		keycodes[i] = KEY_A + i;
-
-	of_property_read_u32_array(node, "linux,keycodes",
-				   keycodes, ARRAY_SIZE(keycodes));
-
-	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
-		priv->keycodes[i] = keycodes[i];
-
-	error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
-				   CAP1106_REG_MAIN_CONTROL_GAIN_MASK,
-				   gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT);
-	if (error)
-		return error;
-
-	/* Disable autorepeat. The Linux input system has its own handling. */
-	error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0);
-	if (error)
-		return error;
-
-	priv->idev = devm_input_allocate_device(dev);
-	if (!priv->idev)
-		return -ENOMEM;
-
-	priv->idev->name = "CAP1106 capacitive touch sensor";
-	priv->idev->id.bustype = BUS_I2C;
-	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
-
-	if (of_property_read_bool(node, "autorepeat"))
-		__set_bit(EV_REP, priv->idev->evbit);
-
-	for (i = 0; i < CAP1106_NUM_CHN; i++)
-		__set_bit(priv->keycodes[i], priv->idev->keybit);
-
-	__clear_bit(KEY_RESERVED, priv->idev->keybit);
-
-	priv->idev->keycode = priv->keycodes;
-	priv->idev->keycodesize = sizeof(priv->keycodes[0]);
-	priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
-
-	priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
-	priv->idev->id.product = CAP1106_PRODUCT_ID;
-	priv->idev->id.version = rev;
-
-	priv->idev->open = cap1106_input_open;
-	priv->idev->close = cap1106_input_close;
-
-	input_set_drvdata(priv->idev, priv);
-
-	/*
-	 * Put the device in deep sleep mode for now.
-	 * ->open() will bring it back once the it is actually needed.
-	 */
-	cap1106_set_sleep(priv, true);
-
-	error = input_register_device(priv->idev);
-	if (error)
-		return error;
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq) {
-		dev_err(dev, "Unable to parse or map IRQ\n");
-		return -ENXIO;
-	}
-
-	error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func,
-					  IRQF_ONESHOT, dev_name(dev), priv);
-	if (error)
-		return error;
-
-	return 0;
-}
-
-static const struct of_device_id cap1106_dt_ids[] = {
-	{ .compatible = "microchip,cap1106", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, cap1106_dt_ids);
-
-static const struct i2c_device_id cap1106_i2c_ids[] = {
-	{ "cap1106", 0 },
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids);
-
-static struct i2c_driver cap1106_i2c_driver = {
-	.driver = {
-		.name	= "cap1106",
-		.owner	= THIS_MODULE,
-		.of_match_table = cap1106_dt_ids,
-	},
-	.id_table	= cap1106_i2c_ids,
-	.probe		= cap1106_i2c_probe,
-};
-
-module_i2c_driver(cap1106_i2c_driver);
-
-MODULE_ALIAS("platform:cap1106");
-MODULE_DESCRIPTION("Microchip CAP1106 driver");
-MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
new file mode 100644
index 000000000000..4f59f0bab28f
--- /dev/null
+++ b/drivers/input/keyboard/cap11xx.c
@@ -0,0 +1,376 @@
+/*
+ * Input driver for Microchip CAP11xx based capacitive touch sensors
+ *
+ * (c) 2014 Daniel Mack <linux@zonque.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+
+#define CAP11XX_REG_MAIN_CONTROL	0x00
+#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
+#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
+#define CAP11XX_REG_MAIN_CONTROL_DLSEEP		BIT(4)
+#define CAP11XX_REG_GENERAL_STATUS	0x02
+#define CAP11XX_REG_SENSOR_INPUT	0x03
+#define CAP11XX_REG_NOISE_FLAG_STATUS	0x0a
+#define CAP11XX_REG_SENOR_DELTA(X)	(0x10 + (X))
+#define CAP11XX_REG_SENSITIVITY_CONTROL	0x1f
+#define CAP11XX_REG_CONFIG		0x20
+#define CAP11XX_REG_SENSOR_ENABLE	0x21
+#define CAP11XX_REG_SENSOR_CONFIG	0x22
+#define CAP11XX_REG_SENSOR_CONFIG2	0x23
+#define CAP11XX_REG_SAMPLING_CONFIG	0x24
+#define CAP11XX_REG_CALIBRATION		0x26
+#define CAP11XX_REG_INT_ENABLE		0x27
+#define CAP11XX_REG_REPEAT_RATE		0x28
+#define CAP11XX_REG_MT_CONFIG		0x2a
+#define CAP11XX_REG_MT_PATTERN_CONFIG	0x2b
+#define CAP11XX_REG_MT_PATTERN		0x2d
+#define CAP11XX_REG_RECALIB_CONFIG	0x2f
+#define CAP11XX_REG_SENSOR_THRESH(X)	(0x30 + (X))
+#define CAP11XX_REG_SENSOR_NOISE_THRESH	0x38
+#define CAP11XX_REG_STANDBY_CHANNEL	0x40
+#define CAP11XX_REG_STANDBY_CONFIG	0x41
+#define CAP11XX_REG_STANDBY_SENSITIVITY	0x42
+#define CAP11XX_REG_STANDBY_THRESH	0x43
+#define CAP11XX_REG_CONFIG2		0x44
+#define CAP11XX_REG_CONFIG2_ALT_POL	BIT(6)
+#define CAP11XX_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
+#define CAP11XX_REG_SENSOR_CALIB	(0xb1 + (X))
+#define CAP11XX_REG_SENSOR_CALIB_LSB1	0xb9
+#define CAP11XX_REG_SENSOR_CALIB_LSB2	0xba
+#define CAP11XX_REG_PRODUCT_ID		0xfd
+#define CAP11XX_REG_MANUFACTURER_ID	0xfe
+#define CAP11XX_REG_REVISION		0xff
+
+#define CAP11XX_MANUFACTURER_ID	0x5d
+
+struct cap11xx_priv {
+	struct regmap *regmap;
+	struct input_dev *idev;
+
+	/* config */
+	u32 keycodes[];
+};
+
+struct cap11xx_hw_model {
+	u8 product_id;
+	unsigned int num_channels;
+};
+
+enum {
+	CAP1106,
+	CAP1126,
+	CAP1188,
+};
+
+static const struct cap11xx_hw_model cap11xx_devices[] = {
+	[CAP1106] = { .product_id = 0x55, .num_channels = 6 },
+	[CAP1126] = { .product_id = 0x53, .num_channels = 6 },
+	[CAP1188] = { .product_id = 0x50, .num_channels = 8 },
+};
+
+static const struct reg_default cap11xx_reg_defaults[] = {
+	{ CAP11XX_REG_MAIN_CONTROL,		0x00 },
+	{ CAP11XX_REG_GENERAL_STATUS,		0x00 },
+	{ CAP11XX_REG_SENSOR_INPUT,		0x00 },
+	{ CAP11XX_REG_NOISE_FLAG_STATUS,	0x00 },
+	{ CAP11XX_REG_SENSITIVITY_CONTROL,	0x2f },
+	{ CAP11XX_REG_CONFIG,			0x20 },
+	{ CAP11XX_REG_SENSOR_ENABLE,		0x3f },
+	{ CAP11XX_REG_SENSOR_CONFIG,		0xa4 },
+	{ CAP11XX_REG_SENSOR_CONFIG2,		0x07 },
+	{ CAP11XX_REG_SAMPLING_CONFIG,		0x39 },
+	{ CAP11XX_REG_CALIBRATION,		0x00 },
+	{ CAP11XX_REG_INT_ENABLE,		0x3f },
+	{ CAP11XX_REG_REPEAT_RATE,		0x3f },
+	{ CAP11XX_REG_MT_CONFIG,		0x80 },
+	{ CAP11XX_REG_MT_PATTERN_CONFIG,	0x00 },
+	{ CAP11XX_REG_MT_PATTERN,		0x3f },
+	{ CAP11XX_REG_RECALIB_CONFIG,		0x8a },
+	{ CAP11XX_REG_SENSOR_THRESH(0),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(1),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(2),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(3),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(4),		0x40 },
+	{ CAP11XX_REG_SENSOR_THRESH(5),		0x40 },
+	{ CAP11XX_REG_SENSOR_NOISE_THRESH,	0x01 },
+	{ CAP11XX_REG_STANDBY_CHANNEL,		0x00 },
+	{ CAP11XX_REG_STANDBY_CONFIG,		0x39 },
+	{ CAP11XX_REG_STANDBY_SENSITIVITY,	0x02 },
+	{ CAP11XX_REG_STANDBY_THRESH,		0x40 },
+	{ CAP11XX_REG_CONFIG2,			0x40 },
+	{ CAP11XX_REG_SENSOR_CALIB_LSB1,	0x00 },
+	{ CAP11XX_REG_SENSOR_CALIB_LSB2,	0x00 },
+};
+
+static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CAP11XX_REG_MAIN_CONTROL:
+	case CAP11XX_REG_SENSOR_INPUT:
+	case CAP11XX_REG_SENOR_DELTA(0):
+	case CAP11XX_REG_SENOR_DELTA(1):
+	case CAP11XX_REG_SENOR_DELTA(2):
+	case CAP11XX_REG_SENOR_DELTA(3):
+	case CAP11XX_REG_SENOR_DELTA(4):
+	case CAP11XX_REG_SENOR_DELTA(5):
+	case CAP11XX_REG_PRODUCT_ID:
+	case CAP11XX_REG_MANUFACTURER_ID:
+	case CAP11XX_REG_REVISION:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config cap11xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CAP11XX_REG_REVISION,
+	.reg_defaults = cap11xx_reg_defaults,
+
+	.num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = cap11xx_volatile_reg,
+};
+
+static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
+{
+	struct cap11xx_priv *priv = data;
+	unsigned int status;
+	int ret, i;
+
+	/*
+	 * Deassert interrupt. This needs to be done before reading the status
+	 * registers, which will not carry valid values otherwise.
+	 */
+	ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < priv->idev->keycodemax; i++)
+		input_report_key(priv->idev, priv->keycodes[i],
+				 status & (1 << i));
+
+	input_sync(priv->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep)
+{
+	return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+				  CAP11XX_REG_MAIN_CONTROL_DLSEEP,
+				  sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0);
+}
+
+static int cap11xx_input_open(struct input_dev *idev)
+{
+	struct cap11xx_priv *priv = input_get_drvdata(idev);
+
+	return cap11xx_set_sleep(priv, false);
+}
+
+static void cap11xx_input_close(struct input_dev *idev)
+{
+	struct cap11xx_priv *priv = input_get_drvdata(idev);
+
+	cap11xx_set_sleep(priv, true);
+}
+
+static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c_client->dev;
+	struct cap11xx_priv *priv;
+	struct device_node *node;
+	const struct cap11xx_hw_model *cap;
+	int i, error, irq, gain = 0;
+	unsigned int val, rev;
+	u32 gain32;
+
+	if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
+		dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
+		return -EINVAL;
+	}
+
+	cap = &cap11xx_devices[id->driver_data];
+	if (!cap || !cap->num_channels) {
+		dev_err(dev, "Invalid device configuration\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev,
+			    sizeof(*priv) +
+				cap->num_channels * sizeof(priv->keycodes[0]),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val);
+	if (error)
+		return error;
+
+	if (val != cap->product_id) {
+		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
+			val, cap->product_id);
+		return -ENXIO;
+	}
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP11XX_MANUFACTURER_ID) {
+		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP11XX_MANUFACTURER_ID);
+		return -ENXIO;
+	}
+
+	error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
+	i2c_set_clientdata(i2c_client, priv);
+	node = dev->of_node;
+
+	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
+		if (is_power_of_2(gain32) && gain32 <= 8)
+			gain = ilog2(gain32);
+		else
+			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
+	}
+
+	if (of_property_read_bool(node, "microchip,irq-active-high")) {
+		error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
+					   CAP11XX_REG_CONFIG2_ALT_POL, 0);
+		if (error)
+			return error;
+	}
+
+	/* Provide some useful defaults */
+	for (i = 0; i < cap->num_channels; i++)
+		priv->keycodes[i] = KEY_A + i;
+
+	of_property_read_u32_array(node, "linux,keycodes",
+				   priv->keycodes, cap->num_channels);
+
+	error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
+				   CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
+				   gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
+	if (error)
+		return error;
+
+	/* Disable autorepeat. The Linux input system has its own handling. */
+	error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+	if (error)
+		return error;
+
+	priv->idev = devm_input_allocate_device(dev);
+	if (!priv->idev)
+		return -ENOMEM;
+
+	priv->idev->name = "CAP11XX capacitive touch sensor";
+	priv->idev->id.bustype = BUS_I2C;
+	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (of_property_read_bool(node, "autorepeat"))
+		__set_bit(EV_REP, priv->idev->evbit);
+
+	for (i = 0; i < cap->num_channels; i++)
+		__set_bit(priv->keycodes[i], priv->idev->keybit);
+
+	__clear_bit(KEY_RESERVED, priv->idev->keybit);
+
+	priv->idev->keycode = priv->keycodes;
+	priv->idev->keycodesize = sizeof(priv->keycodes[0]);
+	priv->idev->keycodemax = cap->num_channels;
+
+	priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
+	priv->idev->id.product = cap->product_id;
+	priv->idev->id.version = rev;
+
+	priv->idev->open = cap11xx_input_open;
+	priv->idev->close = cap11xx_input_close;
+
+	input_set_drvdata(priv->idev, priv);
+
+	/*
+	 * Put the device in deep sleep mode for now.
+	 * ->open() will bring it back once the it is actually needed.
+	 */
+	cap11xx_set_sleep(priv, true);
+
+	error = input_register_device(priv->idev);
+	if (error)
+		return error;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		dev_err(dev, "Unable to parse or map IRQ\n");
+		return -ENXIO;
+	}
+
+	error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
+					  IRQF_ONESHOT, dev_name(dev), priv);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id cap11xx_dt_ids[] = {
+	{ .compatible = "microchip,cap1106", },
+	{ .compatible = "microchip,cap1126", },
+	{ .compatible = "microchip,cap1188", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
+
+static const struct i2c_device_id cap11xx_i2c_ids[] = {
+	{ "cap1106", CAP1106 },
+	{ "cap1126", CAP1126 },
+	{ "cap1188", CAP1188 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
+
+static struct i2c_driver cap11xx_i2c_driver = {
+	.driver = {
+		.name	= "cap11xx",
+		.owner	= THIS_MODULE,
+		.of_match_table = cap11xx_dt_ids,
+	},
+	.id_table	= cap11xx_i2c_ids,
+	.probe		= cap11xx_i2c_probe,
+};
+
+module_i2c_driver(cap11xx_i2c_driver);
+
+MODULE_ALIAS("platform:cap11xx");
+MODULE_DESCRIPTION("Microchip CAP11XX driver");
+MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 8f3a24e15402..d4dd78a7d56b 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 
 struct gpio_button_data {
@@ -617,27 +618,31 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
-		int gpio;
+		int gpio = -1;
 		enum of_gpio_flags flags;
 
-		if (!of_find_property(pp, "gpios", NULL)) {
-			pdata->nbuttons--;
-			dev_warn(dev, "Found button without gpios\n");
-			continue;
-		}
+		button = &pdata->buttons[i++];
 
-		gpio = of_get_gpio_flags(pp, 0, &flags);
-		if (gpio < 0) {
-			error = gpio;
-			if (error != -EPROBE_DEFER)
-				dev_err(dev,
-					"Failed to get gpio flags, error: %d\n",
-					error);
-			return ERR_PTR(error);
+		if (!of_find_property(pp, "gpios", NULL)) {
+			button->irq = irq_of_parse_and_map(pp, 0);
+			if (button->irq == 0) {
+				i--;
+				pdata->nbuttons--;
+				dev_warn(dev, "Found button without gpios or irqs\n");
+				continue;
+			}
+		} else {
+			gpio = of_get_gpio_flags(pp, 0, &flags);
+			if (gpio < 0) {
+				error = gpio;
+				if (error != -EPROBE_DEFER)
+					dev_err(dev,
+						"Failed to get gpio flags, error: %d\n",
+						error);
+				return ERR_PTR(error);
+			}
 		}
 
-		button = &pdata->buttons[i++];
-
 		button->gpio = gpio;
 		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index cb32e2b506b7..21bea52d4365 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -616,6 +616,8 @@ static ssize_t lm8323_set_disable(struct device *dev,
 	unsigned int i;
 
 	ret = kstrtouint(buf, 10, &i);
+	if (ret)
+		return ret;
 
 	mutex_lock(&lm->lock);
 	lm->kp_enabled = !i;
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
index 8c079371c2e7..265d641c40e2 100644
--- a/drivers/input/keyboard/lpc32xx-keys.c
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -66,7 +66,6 @@
 struct lpc32xx_kscan_drv {
 	struct input_dev *input;
 	struct clk *clk;
-	struct resource *iores;
 	void __iomem *kscan_base;
 	unsigned int irq;
 
@@ -188,32 +187,27 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
-	if (!kscandat) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	kscandat = devm_kzalloc(&pdev->dev, sizeof(*kscandat),
+				GFP_KERNEL);
+	if (!kscandat)
 		return -ENOMEM;
-	}
 
 	error = lpc32xx_parse_dt(&pdev->dev, kscandat);
 	if (error) {
 		dev_err(&pdev->dev, "failed to parse device tree\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	keymap_size = sizeof(kscandat->keymap[0]) *
 				(kscandat->matrix_sz << kscandat->row_shift);
-	kscandat->keymap = kzalloc(keymap_size, GFP_KERNEL);
-	if (!kscandat->keymap) {
-		dev_err(&pdev->dev, "could not allocate memory for keymap\n");
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	kscandat->keymap = devm_kzalloc(&pdev->dev, keymap_size, GFP_KERNEL);
+	if (!kscandat->keymap)
+		return -ENOMEM;
 
-	kscandat->input = input = input_allocate_device();
+	kscandat->input = input = devm_input_allocate_device(&pdev->dev);
 	if (!input) {
 		dev_err(&pdev->dev, "failed to allocate input device\n");
-		error = -ENOMEM;
-		goto err_free_keymap;
+		return -ENOMEM;
 	}
 
 	/* Setup key input */
@@ -234,39 +228,26 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 					   kscandat->keymap, kscandat->input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keymap\n");
-		goto err_free_input;
+		return error;
 	}
 
 	input_set_drvdata(kscandat->input, kscandat);
 
-	kscandat->iores = request_mem_region(res->start, resource_size(res),
-					     pdev->name);
-	if (!kscandat->iores) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		error = -EBUSY;
-		goto err_free_input;
-	}
-
-	kscandat->kscan_base = ioremap(kscandat->iores->start,
-				       resource_size(kscandat->iores));
-	if (!kscandat->kscan_base) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -EBUSY;
-		goto err_release_memregion;
-	}
+	kscandat->kscan_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kscandat->kscan_base))
+		return PTR_ERR(kscandat->kscan_base);
 
 	/* Get the key scanner clock */
-	kscandat->clk = clk_get(&pdev->dev, NULL);
+	kscandat->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(kscandat->clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
-		error = PTR_ERR(kscandat->clk);
-		goto err_unmap;
+		return PTR_ERR(kscandat->clk);
 	}
 
 	/* Configure the key scanner */
 	error = clk_prepare_enable(kscandat->clk);
 	if (error)
-		goto err_clk_put;
+		return error;
 
 	writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
 	writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
@@ -277,52 +258,20 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
 	clk_disable_unprepare(kscandat->clk);
 
-	error = request_irq(irq, lpc32xx_kscan_irq, 0, pdev->name, kscandat);
+	error = devm_request_irq(&pdev->dev, irq, lpc32xx_kscan_irq, 0,
+				 pdev->name, kscandat);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_clk_put;
+		return error;
 	}
 
 	error = input_register_device(kscandat->input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err_free_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, kscandat);
-	return 0;
-
-err_free_irq:
-	free_irq(irq, kscandat);
-err_clk_put:
-	clk_put(kscandat->clk);
-err_unmap:
-	iounmap(kscandat->kscan_base);
-err_release_memregion:
-	release_mem_region(kscandat->iores->start,
-			   resource_size(kscandat->iores));
-err_free_input:
-	input_free_device(kscandat->input);
-err_free_keymap:
-	kfree(kscandat->keymap);
-err_free_mem:
-	kfree(kscandat);
-
-	return error;
-}
-
-static int lpc32xx_kscan_remove(struct platform_device *pdev)
-{
-	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
-
-	free_irq(platform_get_irq(pdev, 0), kscandat);
-	clk_put(kscandat->clk);
-	iounmap(kscandat->kscan_base);
-	release_mem_region(kscandat->iores->start,
-			   resource_size(kscandat->iores));
-	input_unregister_device(kscandat->input);
-	kfree(kscandat->keymap);
-	kfree(kscandat);
 
 	return 0;
 }
@@ -378,7 +327,6 @@ MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
 
 static struct platform_driver lpc32xx_kscan_driver = {
 	.probe		= lpc32xx_kscan_probe,
-	.remove		= lpc32xx_kscan_remove,
 	.driver		= {
 		.name	= DRV_NAME,
 		.pm	= &lpc32xx_kscan_pm_ops,
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 009c82256e89..3aa2ec45bcab 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -214,13 +214,14 @@ static int mpr_touchkey_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!mpr121 || !input_dev) {
-		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	mpr121 = devm_kzalloc(&client->dev, sizeof(*mpr121),
+			      GFP_KERNEL);
+	if (!mpr121)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	mpr121->client = client;
 	mpr121->input_dev = input_dev;
@@ -243,44 +244,26 @@ static int mpr_touchkey_probe(struct i2c_client *client,
 	error = mpr121_phys_init(pdata, mpr121, client);
 	if (error) {
 		dev_err(&client->dev, "Failed to init register\n");
-		goto err_free_mem;
+		return error;
 	}
 
-	error = request_threaded_irq(client->irq, NULL,
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
 				     mpr_touchkey_interrupt,
 				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				     client->dev.driver->name, mpr121);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	error = input_register_device(input_dev);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	i2c_set_clientdata(client, mpr121);
 	device_init_wakeup(&client->dev, pdata->wakeup);
 
 	return 0;
-
-err_free_irq:
-	free_irq(client->irq, mpr121);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(mpr121);
-	return error;
-}
-
-static int mpr_touchkey_remove(struct i2c_client *client)
-{
-	struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
-
-	free_irq(client->irq, mpr121);
-	input_unregister_device(mpr121->input_dev);
-	kfree(mpr121);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -327,7 +310,6 @@ static struct i2c_driver mpr_touchkey_driver = {
 	},
 	.id_table	= mpr121_id,
 	.probe		= mpr_touchkey_probe,
-	.remove		= mpr_touchkey_remove,
 };
 
 module_i2c_driver(mpr_touchkey_driver);
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6ab3e7c96329..a90d6bdc499e 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -741,37 +741,27 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-	keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!keypad || !input_dev) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		error = -ENOMEM;
-		goto failed_free;
-	}
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	keypad->pdata = pdata;
 	keypad->input_dev = input_dev;
 	keypad->irq = irq;
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		error = -EBUSY;
-		goto failed_free;
-	}
-
-	keypad->mmio_base = ioremap(res->start, resource_size(res));
-	if (keypad->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -ENXIO;
-		goto failed_free_mem;
-	}
+	keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
 
-	keypad->clk = clk_get(&pdev->dev, NULL);
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
-		error = PTR_ERR(keypad->clk);
-		goto failed_free_io;
+		return PTR_ERR(keypad->clk);
 	}
 
 	input_dev->name = pdev->name;
@@ -802,7 +792,7 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 	}
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keycode\n");
-		goto failed_put_clk;
+		return error;
 	}
 
 	keypad->row_shift = get_count_order(pdata->matrix_key_cols);
@@ -812,61 +802,26 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 		input_dev->evbit[0] |= BIT_MASK(EV_REL);
 	}
 
-	error = request_irq(irq, pxa27x_keypad_irq_handler, 0,
-			    pdev->name, keypad);
+	error = devm_request_irq(&pdev->dev, irq, pxa27x_keypad_irq_handler,
+				 0, pdev->name, keypad);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto failed_put_clk;
+		return error;
 	}
 
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto failed_free_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, keypad);
 	device_init_wakeup(&pdev->dev, 1);
 
 	return 0;
-
-failed_free_irq:
-	free_irq(irq, keypad);
-failed_put_clk:
-	clk_put(keypad->clk);
-failed_free_io:
-	iounmap(keypad->mmio_base);
-failed_free_mem:
-	release_mem_region(res->start, resource_size(res));
-failed_free:
-	input_free_device(input_dev);
-	kfree(keypad);
-	return error;
 }
 
-static int pxa27x_keypad_remove(struct platform_device *pdev)
-{
-	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(keypad->irq, keypad);
-	clk_put(keypad->clk);
-
-	input_unregister_device(keypad->input_dev);
-	iounmap(keypad->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(keypad);
-
-	return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:pxa27x-keypad");
-
 #ifdef CONFIG_OF
 static const struct of_device_id pxa27x_keypad_dt_match[] = {
 	{ .compatible = "marvell,pxa27x-keypad" },
@@ -877,7 +832,6 @@ MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
 
 static struct platform_driver pxa27x_keypad_driver = {
 	.probe		= pxa27x_keypad_probe,
-	.remove		= pxa27x_keypad_remove,
 	.driver		= {
 		.name	= "pxa27x-keypad",
 		.of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
@@ -888,3 +842,5 @@ module_platform_driver(pxa27x_keypad_driver);
 
 MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
 MODULE_LICENSE("GPL");
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-keypad");