diff options
Diffstat (limited to 'drivers/i2c')
35 files changed, 604 insertions, 105 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9367c4cfe936..4d44a2db29dd 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -183,6 +183,7 @@ config I2C_PIIX4 ATI IXP200 ATI IXP300 ATI IXP400 + ATI SB600 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 @@ -341,6 +342,13 @@ config I2C_PARPORT_LIGHT This support is also available as a module. If so, the module will be called i2c-parport-light. +config I2C_PASEMI + tristate "PA Semi SMBus interface" +# depends on PPC_PASEMI && I2C && PCI + depends on I2C && PCI + help + Supports the PA Semi PWRficient on-chip SMBus interfaces. + config I2C_PROSAVAGE tristate "S3/VIA (Pro)Savage" depends on I2C && PCI @@ -499,11 +507,11 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA 82C596/82C686/82xx" + tristate "VIA VT82C596/82C686/82xx and CX700" depends on I2C && PCI help If you say yes to this option, support will be included for the VIA - 82C596/82C686/82xx I2C interfaces. Specifically, the following + VT82C596 and later SMBus interface. Specifically, the following chipsets are supported: VT82C596A/B VT82C686A/B @@ -512,6 +520,7 @@ config I2C_VIAPRO VT8235 VT8237R/A VT8251 + CX700 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 37196c1d0794..03505aa44bbf 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o +obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index e75d339a3481..6fd8ad7faa06 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -57,7 +57,6 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/i2c.h> @@ -475,6 +474,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI1535, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 8e1e3f8e40a4..6b68074e518a 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -314,35 +314,11 @@ static u32 ali1563_func(struct i2c_adapter * a) } -static void ali1563_enable(struct pci_dev * dev) -{ - u16 ctrl; - - pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - ctrl |= 0x7; - pci_write_config_word(dev,ALI1563_SMBBA,ctrl); -} - static int __devinit ali1563_setup(struct pci_dev * dev) { u16 ctrl; pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - printk("ali1563: SMBus control = %04x\n",ctrl); - - /* Check if device is even enabled first */ - if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_warn(&dev->dev,"I/O space not enabled, trying manually\n"); - ali1563_enable(dev); - } - if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_warn(&dev->dev,"I/O space still not enabled, giving up\n"); - goto Err; - } - if (!(ctrl & ALI1563_SMB_HOSTEN)) { - dev_warn(&dev->dev,"Host Controller not enabled\n"); - goto Err; - } /* SMB I/O Base in high 12 bits and must be aligned with the * size of the I/O space. */ @@ -351,11 +327,31 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } + + /* Check if device is enabled */ + if (!(ctrl & ALI1563_SMB_HOSTEN)) { + dev_warn(&dev->dev, "Host Controller not enabled\n"); + goto Err; + } + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_warn(&dev->dev, "I/O space not enabled, trying manually\n"); + pci_write_config_word(dev, ALI1563_SMBBA, + ctrl | ALI1563_SMB_IOEN); + pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_err(&dev->dev, "I/O space still not enabled, " + "giving up\n"); + goto Err; + } + } + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, ali1563_pci_driver.name)) { - dev_warn(&dev->dev,"Could not allocate I/O space"); + dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", + ali1563_smba); goto Err; } + dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba); return 0; Err: @@ -374,6 +370,7 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI1563, .class = I2C_CLASS_HWMON, .algo = &ali1563_algorithm, }; @@ -384,13 +381,18 @@ static int __devinit ali1563_probe(struct pci_dev * dev, int error; if ((error = ali1563_setup(dev))) - return error; + goto exit; ali1563_adapter.dev.parent = &dev->dev; sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x", ali1563_smba); if ((error = i2c_add_adapter(&ali1563_adapter))) - ali1563_shutdown(dev); - printk("%s: Returning %d\n",__FUNCTION__,error); + goto exit_shutdown; + return 0; + +exit_shutdown: + ali1563_shutdown(dev); +exit: + dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error); return error; } diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 3f11b6e1a341..e4e0df106812 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -64,7 +64,6 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/i2c.h> @@ -470,6 +469,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI15X3, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 08e915730caf..e5e96c817566 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -184,12 +184,14 @@ static int __init amd756_s4882_init(void) s4882_algo[0].smbus_xfer = amd756_access_virt0; s4882_adapter[0] = amd756_smbus; s4882_adapter[0].algo = s4882_algo; + s4882_adapter[0].dev.parent = amd756_smbus.dev.parent; for (i = 1; i < 5; i++) { s4882_algo[i] = *(amd756_smbus.algo); s4882_adapter[i] = amd756_smbus; sprintf(s4882_adapter[i].name, "SMBus 8111 adapter (CPU%d)", i-1); s4882_adapter[i].algo = s4882_algo+i; + s4882_adapter[i].dev.parent = amd756_smbus.dev.parent; } s4882_algo[1].smbus_xfer = amd756_access_virt1; s4882_algo[2].smbus_xfer = amd756_access_virt2; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 2d21afdc5b1c..fa6155a54cc3 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -42,7 +42,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/init.h> @@ -301,6 +300,7 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_AMD756, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0fbc7186c91a..5bba3fb50d71 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -12,7 +12,6 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/i2c.h> @@ -76,7 +75,8 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) udelay(1); if (!timeout) { - dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); + dev_warn(&smbus->dev->dev, + "Timeout while waiting for IBF to clear\n"); return -1; } @@ -91,14 +91,16 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) udelay(1); if (!timeout) { - dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); + dev_warn(&smbus->dev->dev, + "Timeout while waiting for OBF to set\n"); return -1; } return 0; } -static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) +static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, + unsigned char *data) { if (amd_ec_wait_write(smbus)) return -1; @@ -115,7 +117,8 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, return 0; } -static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) +static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, + unsigned char data) { if (amd_ec_wait_write(smbus)) return -1; @@ -175,18 +178,19 @@ static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, #define AMD_SMB_PRTCL_PEC 0x80 -static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) +static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, u8 command, int size, + union i2c_smbus_data * data) { struct amd_smbus *smbus = adap->algo_data; unsigned char protocol, len, pec, temp[2]; int i; - protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE; + protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ + : AMD_SMB_PRTCL_WRITE; pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0; switch (size) { - case I2C_SMBUS_QUICK: protocol |= AMD_SMB_PRTCL_QUICK; read_write = I2C_SMBUS_WRITE; @@ -208,8 +212,10 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_WORD_DATA: amd_ec_write(smbus, AMD_SMB_CMD, command); if (read_write == I2C_SMBUS_WRITE) { - amd_ec_write(smbus, AMD_SMB_DATA, data->word); - amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); + amd_ec_write(smbus, AMD_SMB_DATA, + data->word & 0xff); + amd_ec_write(smbus, AMD_SMB_DATA + 1, + data->word >> 8); } protocol |= AMD_SMB_PRTCL_WORD_DATA | pec; break; @@ -217,27 +223,31 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_BLOCK_DATA: amd_ec_write(smbus, AMD_SMB_CMD, command); if (read_write == I2C_SMBUS_WRITE) { - len = min_t(u8, data->block[0], 32); + len = min_t(u8, data->block[0], + I2C_SMBUS_BLOCK_MAX); amd_ec_write(smbus, AMD_SMB_BCNT, len); for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); } protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec; break; case I2C_SMBUS_I2C_BLOCK_DATA: - len = min_t(u8, data->block[0], 32); + len = min_t(u8, data->block[0], + I2C_SMBUS_BLOCK_MAX); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); if (read_write == I2C_SMBUS_WRITE) for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA; break; case I2C_SMBUS_PROC_CALL: amd_ec_write(smbus, AMD_SMB_CMD, command); - amd_ec_write(smbus, AMD_SMB_DATA, data->word); + amd_ec_write(smbus, AMD_SMB_DATA, data->word & 0xff); amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); protocol = AMD_SMB_PRTCL_PROC_CALL | pec; read_write = I2C_SMBUS_READ; @@ -248,7 +258,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; @@ -280,7 +291,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl return 0; switch (size) { - case I2C_SMBUS_BYTE: case I2C_SMBUS_BYTE_DATA: amd_ec_read(smbus, AMD_SMB_DATA, &data->byte); @@ -296,10 +306,11 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: amd_ec_read(smbus, AMD_SMB_BCNT, &len); - len = min_t(u8, len, 32); + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX); case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < len; i++) - amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1); + amd_ec_read(smbus, AMD_SMB_DATA + i, + data->block + i + 1); data->block[0] = len; break; } @@ -310,7 +321,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl static u32 amd8111_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC; @@ -329,12 +341,13 @@ static struct pci_device_id amd8111_ids[] = { MODULE_DEVICE_TABLE (pci, amd8111_ids); -static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int __devinit amd8111_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct amd_smbus *smbus; - int error = -ENODEV; + int error; - if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) return -ENODEV; smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); @@ -345,12 +358,15 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) { + error = -EBUSY; goto out_kfree; + } smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, I2C_NAME_SIZE, "SMBus2 AMD8111 adapter at %04x", smbus->base); + smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; @@ -358,11 +374,11 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ /* set up the driverfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; + pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); error = i2c_add_adapter(&smbus->adapter); if (error) goto out_release_region; - pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); pci_set_drvdata(dev, smbus); return 0; @@ -370,10 +386,9 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ release_region(smbus->base, smbus->size); out_kfree: kfree(smbus); - return -1; + return error; } - static void __devexit amd8111_remove(struct pci_dev *dev) { struct amd_smbus *smbus = pci_get_drvdata(dev); @@ -395,7 +410,6 @@ static int __init i2c_amd8111_init(void) return pci_register_driver(&amd8111_driver); } - static void __exit i2c_amd8111_exit(void) { pci_unregister_driver(&amd8111_driver); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ae625b854470..21f2671f7220 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -48,7 +48,6 @@ #include <linux/kernel.h> #include <linux/stddef.h> #include <linux/delay.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/i2c.h> @@ -123,7 +122,7 @@ static int i801_transaction(void) dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); return -1; } else { - dev_dbg(&I801_dev->dev, "Successfull!\n"); + dev_dbg(&I801_dev->dev, "Successful!\n"); } } @@ -442,6 +441,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_I801, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 10c98bc88aa6..42e8d94c276f 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -171,6 +171,7 @@ static struct i2c_algo_bit_data i810_i2c_bit_data = { static struct i2c_adapter i810_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_I810, .name = "I810/I815 I2C Adapter", .algo_data = &i810_i2c_bit_data, }; @@ -186,6 +187,7 @@ static struct i2c_algo_bit_data i810_ddc_bit_data = { static struct i2c_adapter i810_ddc_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_I810, .name = "I810/I815 DDC Adapter", .algo_data = &i810_ddc_bit_data, }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 1898e9987021..8b14d14e60ca 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -727,6 +727,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ /* Register it with i2c layer */ adap = &dev->adap; + adap->dev.parent = &ocp->dev; strcpy(adap->name, "IBM IIC"); i2c_set_adapdata(adap, dev); adap->id = I2C_HW_OCP; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index d108ab4974cc..20ee4f7c53a0 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -36,7 +36,6 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/errno.h> -#include <linux/sched.h> #include <linux/platform_device.h> #include <linux/i2c.h> diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 8ed59a2dff53..5f33bc9c1e02 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -39,6 +39,7 @@ #include <linux/i2c.h> #include <linux/i2c-isa.h> #include <linux/platform_device.h> +#include <linux/completion.h> static u32 isa_func(struct i2c_adapter *adapter); diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 490173611d6b..a3283b907eb8 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -520,6 +520,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) rc = -ENXIO; goto exit_unmap_regs; } + drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index ad37c10e7fec..1514ec5b77f8 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -44,7 +44,6 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/i2c.h> @@ -57,7 +56,6 @@ MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver"); struct nforce2_smbus { - struct pci_dev *dev; struct i2c_adapter adapter; int base; int size; @@ -230,7 +228,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; smbus->size = 64; } - smbus->dev = dev; if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", @@ -238,6 +235,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, return -1; } smbus->adapter.owner = THIS_MODULE; + smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index f28a76d1c0af..e417c2c3ca22 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/sched.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/platform_device.h> diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index 9ddd816d5d0f..ed69d846cb95 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -88,6 +88,13 @@ static struct adapter_parm adapter_parm[] = { .getscl = { 0x40, STAT, 0 }, .init = { 0xfc, DATA, 0 }, }, + /* type 7: One For All JP1 parallel port adapter */ + { + .setsda = { 0x01, DATA, 0 }, + .setscl = { 0x02, DATA, 0 }, + .getsda = { 0x80, STAT, 1 }, + .init = { 0x04, DATA, 1 }, + }, }; static int type = -1; @@ -101,4 +108,5 @@ MODULE_PARM_DESC(type, " 4 = ADM1032 evaluation board\n" " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" " 6 = Barco LPT->DVI (K5800236) adapter\n" + " 7 = One For All JP1 parallel port adapter\n" ); diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c new file mode 100644 index 000000000000..f54fb5d65cc4 --- /dev/null +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -0,0 +1,426 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * SMBus host driver for PA Semi PWRficient + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/io.h> + +static struct pci_driver pasemi_smb_driver; + +struct pasemi_smbus { + struct pci_dev *dev; + struct i2c_adapter adapter; + unsigned long base; + int size; +}; + +/* Register offsets */ +#define REG_MTXFIFO 0x00 +#define REG_MRXFIFO 0x04 +#define REG_SMSTA 0x14 +#define REG_CTL 0x1c + +/* Register defs */ +#define MTXFIFO_READ 0x00000400 +#define MTXFIFO_STOP 0x00000200 +#define MTXFIFO_START 0x00000100 +#define MTXFIFO_DATA_M 0x000000ff + +#define MRXFIFO_EMPTY 0x00000100 +#define MRXFIFO_DATA_M 0x000000ff + +#define SMSTA_XEN 0x08000000 + +#define CTL_MRR 0x00000400 +#define CTL_MTR 0x00000200 +#define CTL_CLK_M 0x000000ff + +#define CLK_100K_DIV 84 +#define CLK_400K_DIV 21 + +static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val) +{ + dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n", + smbus->base + reg, val); + outl(val, smbus->base + reg); +} + +static inline int reg_read(struct pasemi_smbus *smbus, int reg) +{ + int ret; + ret = inl(smbus->base + reg); + dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n", + smbus->base + reg, ret); + return ret; +} + +#define TXFIFO_WR(smbus, reg) reg_write((smbus), REG_MTXFIFO, (reg)) +#define RXFIFO_RD(smbus) reg_read((smbus), REG_MRXFIFO) + +static void pasemi_smb_clear(struct pasemi_smbus *smbus) +{ + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + reg_write(smbus, REG_SMSTA, status); +} + +static unsigned int pasemi_smb_waitready(struct pasemi_smbus *smbus) +{ + int timeout = 10; + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + + while (!(status & SMSTA_XEN) && timeout--) { + msleep(1); + status = reg_read(smbus, REG_SMSTA); + } + + if (timeout < 0) { + dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status); + reg_write(smbus, REG_SMSTA, status); + return -ETIME; + } + + /* Clear XEN */ + reg_write(smbus, REG_SMSTA, SMSTA_XEN); + + return 0; +} + +static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, + struct i2c_msg *msg, int stop) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int read, i, err; + u32 rd; + + read = msg->flags & I2C_M_RD ? 1 : 0; + + TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read); + + if (read) { + TXFIFO_WR(smbus, msg->len | MTXFIFO_READ | + (stop ? MTXFIFO_STOP : 0)); + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + for (i = 0; i < msg->len; i++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + msg->buf[i] = rd & MRXFIFO_DATA_M; + } + } else { + for (i = 0; i < msg->len - 1; i++) + TXFIFO_WR(smbus, msg->buf[i]); + + TXFIFO_WR(smbus, msg->buf[msg->len] | + (stop ? MTXFIFO_STOP : 0)); + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static int pasemi_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int ret, i; + + pasemi_smb_clear(smbus); + + ret = 0; + + for (i = 0; i < num && !ret; i++) + ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1))); + + return ret ? ret : num; +} + +static int pasemi_smb_xfer(struct i2c_adapter *adapter, + u16 addr, unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + unsigned int rd; + int read_flag, err; + int len = 0, i; + + /* All our ops take 8-bit shifted addresses */ + addr <<= 1; + read_flag = read_write == I2C_SMBUS_READ; + + pasemi_smb_clear(smbus); + + switch (size) { + case I2C_SMBUS_QUICK: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START | + MTXFIFO_STOP); + break; + case I2C_SMBUS_BYTE: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START); + if (read_write) + TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ); + else + TXFIFO_WR(smbus, MTXFIFO_STOP | command); + break; + case I2C_SMBUS_BYTE_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte); + } + break; + case I2C_SMBUS_WORD_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8)); + } + break; + case I2C_SMBUS_BLOCK_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | + MTXFIFO_STOP); + } else { + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, len); + for (i = 1; i < len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP); + } + break; + case I2C_SMBUS_PROC_CALL: + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ); + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1); + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, len); + for (i = 1; i <= len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ); + TXFIFO_WR(smbus, MTXFIFO_READ | 1); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX - len); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | MTXFIFO_STOP); + break; + + default: + dev_warn(&adapter->dev, "Unsupported transaction %d\n", size); + return -EINVAL; + } + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + if (read_write == I2C_SMBUS_WRITE) + return 0; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->byte = rd & MRXFIFO_DATA_M; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word = rd & MRXFIFO_DATA_M; + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word |= (rd & MRXFIFO_DATA_M) << 8; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + data->block[0] = len; + for (i = 1; i <= len; i ++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->block[i] = rd & MRXFIFO_DATA_M; + } + break; + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static u32 pasemi_smb_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C; +} + +static const struct i2c_algorithm smbus_algorithm = { + .master_xfer = pasemi_i2c_xfer, + .smbus_xfer = pasemi_smb_xfer, + .functionality = pasemi_smb_func, +}; + +static int __devinit pasemi_smb_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct pasemi_smbus *smbus; + int error; + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) + return -ENODEV; + + smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL); + if (!smbus) + return -ENOMEM; + + smbus->dev = dev; + smbus->base = pci_resource_start(dev, 0); + smbus->size = pci_resource_len(dev, 0); + + if (!request_region(smbus->base, smbus->size, + pasemi_smb_driver.name)) { + error = -EBUSY; + goto out_kfree; + } + + smbus->adapter.owner = THIS_MODULE; + snprintf(smbus->adapter.name, I2C_NAME_SIZE, + "PA Semi SMBus adapter at 0x%lx", smbus->base); + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; + smbus->adapter.algo_data = smbus; + + /* set up the driverfs linkage to our parent device */ + smbus->adapter.dev.parent = &dev->dev; + + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + + error = i2c_add_adapter(&smbus->adapter); + if (error) + goto out_release_region; + + pci_set_drvdata(dev, smbus); + + return 0; + + out_release_region: + release_region(smbus->base, smbus->size); + out_kfree: + kfree(smbus); + return error; +} + +static void __devexit pasemi_smb_remove(struct pci_dev *dev) +{ + struct pasemi_smbus *smbus = pci_get_drvdata(dev); + + i2c_del_adapter(&smbus->adapter); + release_region(smbus->base, smbus->size); + kfree(smbus); +} + +static struct pci_device_id pasemi_smb_ids[] = { + { PCI_DEVICE(0x1959, 0xa003) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, pasemi_smb_ids); + +static struct pci_driver pasemi_smb_driver = { + .name = "i2c-pasemi", + .id_table = pasemi_smb_ids, + .probe = pasemi_smb_probe, + .remove = __devexit_p(pasemi_smb_remove), +}; + +static int __init pasemi_smb_init(void) +{ + return pci_register_driver(&pasemi_smb_driver); +} + +static void __exit pasemi_smb_exit(void) +{ + pci_unregister_driver(&pasemi_smb_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>"); +MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); + +module_init(pasemi_smb_init); +module_exit(pasemi_smb_exit); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 30c7a1b38cbd..d888293c1a9c 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -23,6 +23,7 @@ Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000 + ATI IXP200, IXP300, IXP400, SB600 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -34,7 +35,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/init.h> @@ -383,6 +383,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_PIIX4, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; @@ -396,6 +397,8 @@ static struct pci_device_id piix4_ids[] = { .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS), .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS), + .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 648d55533d87..1425d2245c82 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -25,7 +25,6 @@ #include <linux/types.h> #include <linux/i2c.h> #include <linux/init.h> -#include <linux/completion.h> #include <linux/device.h> #include <linux/platform_device.h> #include <asm/prom.h> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 4ca6de209b8b..556f244aae76 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/time.h> #include <linux/interrupt.h> -#include <linux/sched.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/err.h> diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 844b4ff90893..b7fb65c30112 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -145,6 +145,7 @@ static struct i2c_algo_bit_data sav_i2c_bit_data = { static struct i2c_adapter savage4_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_SAVAGE, .name = "I2C Savage4 adapter", .algo_data = &sav_i2c_bit_data, }; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 38bbfd840b6b..d333babe4ad3 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -365,6 +365,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS5595, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index dec0bafb52ab..172bacf932a6 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -457,6 +457,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS630, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7fd07fbac336..73dae449fb23 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -37,7 +37,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/init.h> @@ -249,6 +248,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS96X, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 15d7e00e47e6..bbcc62151f7c 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -86,6 +86,7 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VIA, .class = I2C_CLASS_HWMON, .name = "VIA i2c", .algo_data = &bit_data, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index efc6bbf0cc0a..03c5fc868548 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2005 - 2007 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,6 +36,7 @@ VT8237R 0x3227 yes VT8237A 0x3337 yes VT8251 0x3287 yes + CX700 0x8324 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -306,6 +307,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_VIA2, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; @@ -383,6 +385,7 @@ found: dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CX700: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -442,6 +445,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), + .driver_data = SMBBA3 }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b0377b81744b..88a3447e11e1 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -165,6 +165,7 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = { static struct i2c_adapter voodoo3_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VOO, .class = I2C_CLASS_TV_ANALOG, .name = "I2C Voodoo3/Banshee adapter", .algo_data = &voo_i2c_bit_data, @@ -181,6 +182,7 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = { static struct i2c_adapter voodoo3_ddc_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VOO, .class = I2C_CLASS_DDC, .name = "DDC Voodoo3/Banshee adapter", .algo_data = &voo_ddc_bit_data, diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 714bae780953..0b082c5a0195 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -428,7 +428,7 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface) } static __init struct scx200_acb_iface *scx200_create_iface(const char *text, - int index) + struct device *dev, int index) { struct scx200_acb_iface *iface; struct i2c_adapter *adapter; @@ -446,6 +446,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON; + adapter->dev.parent = dev; mutex_init(&iface->mutex); @@ -486,7 +487,7 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev, struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, 0); + iface = scx200_create_iface(text, &pdev->dev, 0); if (iface == NULL) return -ENOMEM; @@ -524,7 +525,7 @@ static int __init scx200_create_isa(const char *text, unsigned long base, struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, index); + iface = scx200_create_iface(text, NULL, index); if (iface == NULL) return -ENOMEM; diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index 6cd96e43aa72..c3022a023449 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", }; diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index cec3a0c3894d..bfce13c8f1ff 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -30,7 +30,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/sched.h> #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/mutex.h> diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index ccdf3e90862b..9fafadb92510 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -27,7 +27,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <linux/usb.h> #include <linux/usb/otg.h> diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 4ee56def61f2..214fbb1423c5 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -308,7 +308,7 @@ static int dbg_tps_open(struct inode *inode, struct file *file) return single_open(file, dbg_show, inode->i_private); } -static struct file_operations debug_fops = { +static const struct file_operations debug_fops = { .open = dbg_tps_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b05378a3d673..21fe1406c8b4 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -32,6 +32,7 @@ #include <linux/seq_file.h> #include <linux/platform_device.h> #include <linux/mutex.h> +#include <linux/completion.h> #include <asm/uaccess.h> @@ -40,49 +41,72 @@ static LIST_HEAD(drivers); static DEFINE_MUTEX(core_lists); static DEFINE_IDR(i2c_adapter_idr); + +/* ------------------------------------------------------------------------- */ + /* match always succeeds, as we want the probe() to tell if we really accept this match */ static int i2c_device_match(struct device *dev, struct device_driver *drv) { return 1; } -static int i2c_bus_suspend(struct device * dev, pm_message_t state) +static int i2c_device_probe(struct device *dev) { - int rc = 0; + return -ENODEV; +} - if (dev->driver && dev->driver->suspend) - rc = dev->driver->suspend(dev, state); - return rc; +static int i2c_device_remove(struct device *dev) +{ + return 0; } -static int i2c_bus_resume(struct device * dev) +static void i2c_device_shutdown(struct device *dev) { - int rc = 0; - - if (dev->driver && dev->driver->resume) - rc = dev->driver->resume(dev); - return rc; + struct i2c_driver *driver; + + if (!dev->driver) + return; + driver = to_i2c_driver(dev->driver); + if (driver->shutdown) + driver->shutdown(to_i2c_client(dev)); } -static int i2c_device_probe(struct device *dev) +static int i2c_device_suspend(struct device * dev, pm_message_t mesg) { - return -ENODEV; + struct i2c_driver *driver; + + if (!dev->driver) + return 0; + driver = to_i2c_driver(dev->driver); + if (!driver->suspend) + return 0; + return driver->suspend(to_i2c_client(dev), mesg); } -static int i2c_device_remove(struct device *dev) +static int i2c_device_resume(struct device * dev) { - return 0; + struct i2c_driver *driver; + + if (!dev->driver) + return 0; + driver = to_i2c_driver(dev->driver); + if (!driver->resume) + return 0; + return driver->resume(to_i2c_client(dev)); } struct bus_type i2c_bus_type = { - .name = "i2c", - .match = i2c_device_match, - .probe = i2c_device_probe, - .remove = i2c_device_remove, - .suspend = i2c_bus_suspend, - .resume = i2c_bus_resume, + .name = "i2c", + .match = i2c_device_match, + .probe = i2c_device_probe, + .remove = i2c_device_remove, + .shutdown = i2c_device_shutdown, + .suspend = i2c_device_suspend, + .resume = i2c_device_resume, }; +/* ------------------------------------------------------------------------- */ + void i2c_adapter_dev_release(struct device *dev) { struct i2c_adapter *adap = dev_to_i2c_adapter(dev); @@ -193,9 +217,8 @@ int i2c_add_adapter(struct i2c_adapter *adap) */ if (adap->dev.parent == NULL) { adap->dev.parent = &platform_bus; - printk(KERN_WARNING "**WARNING** I2C adapter driver [%s] " - "forgot to specify physical device; fix it!\n", - adap->name); + pr_debug("I2C adapter driver [%s] forgot to specify " + "physical device\n", adap->name); } sprintf(adap->dev.bus_id, "i2c-%d", adap->nr); adap->dev.driver = &i2c_adapter_driver; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index ac5bd2a7ca99..cb4fa9bef8cd 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -392,7 +392,7 @@ static int i2cdev_release(struct inode *inode, struct file *file) return 0; } -static struct file_operations i2cdev_fops = { +static const struct file_operations i2cdev_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .read = i2cdev_read, |