diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dc.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dc.h | 137 |
1 files changed, 131 insertions, 6 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 1a7fd6aa77eb..44e4b0465587 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -39,9 +39,10 @@ #include "inc/hw/dmcu.h" #include "dml/display_mode_lib.h" -#define DC_VER "3.2.17" +#define DC_VER "3.2.27" #define MAX_SURFACES 3 +#define MAX_PLANES 6 #define MAX_STREAMS 6 #define MAX_SINKS_PER_LINK 4 @@ -53,6 +54,41 @@ struct dc_versions { struct dmcu_version dmcu_version; }; +enum dc_plane_type { + DC_PLANE_TYPE_INVALID, + DC_PLANE_TYPE_DCE_RGB, + DC_PLANE_TYPE_DCE_UNDERLAY, + DC_PLANE_TYPE_DCN_UNIVERSAL, +}; + +struct dc_plane_cap { + enum dc_plane_type type; + uint32_t blends_with_above : 1; + uint32_t blends_with_below : 1; + uint32_t per_pixel_alpha : 1; + struct { + uint32_t argb8888 : 1; + uint32_t nv12 : 1; + uint32_t fp16 : 1; + } pixel_format_support; + // max upscaling factor x1000 + // upscaling factors are always >= 1 + // for example, 1080p -> 8K is 4.0, or 4000 raw value + struct { + uint32_t argb8888; + uint32_t nv12; + uint32_t fp16; + } max_upscale_factor; + // max downscale factor x1000 + // downscale factors are always <= 1 + // for example, 8K -> 1080p is 0.25, or 250 raw value + struct { + uint32_t argb8888; + uint32_t nv12; + uint32_t fp16; + } max_downscale_factor; +}; + struct dc_caps { uint32_t max_streams; uint32_t max_links; @@ -73,6 +109,7 @@ struct dc_caps { bool force_dp_tps4_for_cp2520; bool disable_dp_clk_share; bool psp_setup_panel_mode; + struct dc_plane_cap planes[MAX_PLANES]; }; struct dc_dcc_surface_param { @@ -164,6 +201,10 @@ struct dc_config { bool gpu_vm_support; bool disable_disp_pll_sharing; bool fbc_support; + bool optimize_edp_link_rate; + bool disable_fractional_pwm; + bool allow_seamless_boot_optimization; + bool power_down_display_on_boot; }; enum visual_confirm { @@ -203,7 +244,59 @@ struct dc_clocks { int fclk_khz; int phyclk_khz; int dramclk_khz; -}; + bool p_state_change_support; +}; + +struct dc_bw_validation_profile { + bool enable; + + unsigned long long total_ticks; + unsigned long long voltage_level_ticks; + unsigned long long watermark_ticks; + unsigned long long rq_dlg_ticks; + + unsigned long long total_count; + unsigned long long skip_fast_count; + unsigned long long skip_pass_count; + unsigned long long skip_fail_count; +}; + +#define BW_VAL_TRACE_SETUP() \ + unsigned long long end_tick = 0; \ + unsigned long long voltage_level_tick = 0; \ + unsigned long long watermark_tick = 0; \ + unsigned long long start_tick = dc->debug.bw_val_profile.enable ? \ + dm_get_timestamp(dc->ctx) : 0 + +#define BW_VAL_TRACE_COUNT() \ + if (dc->debug.bw_val_profile.enable) \ + dc->debug.bw_val_profile.total_count++ + +#define BW_VAL_TRACE_SKIP(status) \ + if (dc->debug.bw_val_profile.enable) { \ + if (!voltage_level_tick) \ + voltage_level_tick = dm_get_timestamp(dc->ctx); \ + dc->debug.bw_val_profile.skip_ ## status ## _count++; \ + } + +#define BW_VAL_TRACE_END_VOLTAGE_LEVEL() \ + if (dc->debug.bw_val_profile.enable) \ + voltage_level_tick = dm_get_timestamp(dc->ctx) + +#define BW_VAL_TRACE_END_WATERMARKS() \ + if (dc->debug.bw_val_profile.enable) \ + watermark_tick = dm_get_timestamp(dc->ctx) + +#define BW_VAL_TRACE_FINISH() \ + if (dc->debug.bw_val_profile.enable) { \ + end_tick = dm_get_timestamp(dc->ctx); \ + dc->debug.bw_val_profile.total_ticks += end_tick - start_tick; \ + dc->debug.bw_val_profile.voltage_level_ticks += voltage_level_tick - start_tick; \ + if (watermark_tick) { \ + dc->debug.bw_val_profile.watermark_ticks += watermark_tick - voltage_level_tick; \ + dc->debug.bw_val_profile.rq_dlg_ticks += end_tick - watermark_tick; \ + } \ + } struct dc_debug_options { enum visual_confirm visual_confirm; @@ -257,6 +350,8 @@ struct dc_debug_options { bool skip_detection_link_training; unsigned int force_odm_combine; //bit vector based on otg inst unsigned int force_fclk_khz; + bool disable_tri_buf; + struct dc_bw_validation_profile bw_val_profile; }; struct dc_debug_data { @@ -265,6 +360,14 @@ struct dc_debug_data { uint32_t auxErrorCount; }; +struct dc_bounding_box_overrides { + int sr_exit_time_ns; + int sr_enter_plus_exit_time_ns; + int urgent_latency_ns; + int percent_of_ideal_drambw; + int dram_clock_change_latency_ns; +}; + struct dc_state; struct resource_pool; struct dce_hwseq; @@ -274,6 +377,7 @@ struct dc { struct dc_cap_funcs cap_funcs; struct dc_config config; struct dc_debug_options debug; + struct dc_bounding_box_overrides bb_overrides; struct dc_context *ctx; uint8_t link_count; @@ -298,8 +402,12 @@ struct dc { struct hw_sequencer_funcs hwss; struct dce_hwseq *hwseq; + /* Require to optimize clocks and bandwidth for added/removed planes */ bool optimized_required; + /* Require to maintain clocks and bandwidth for UEFI enabled HW */ + bool optimize_seamless_boot; + /* FBC compressor */ struct compressor *fbc_compressor; @@ -327,6 +435,7 @@ struct dc_init_data { struct hw_asic_id asic_id; void *driver; /* ctx */ struct cgs_device *cgs_device; + struct dc_bounding_box_overrides bb_overrides; int num_virtual_links; /* @@ -503,6 +612,9 @@ struct dc_plane_state { struct dc_plane_status status; struct dc_context *ctx; + /* HACK: Workaround for forcing full reprogramming under some conditions */ + bool force_full_update; + /* private to dc_surface.c */ enum dc_irq_source irq_source; struct kref refcount; @@ -594,7 +706,7 @@ struct dc_validation_set { uint8_t plane_count; }; -bool dc_validate_seamless_boot_timing(struct dc *dc, +bool dc_validate_seamless_boot_timing(const struct dc *dc, const struct dc_sink *sink, struct dc_crtc_timing *crtc_timing); @@ -602,9 +714,14 @@ enum dc_status dc_validate_plane(struct dc *dc, const struct dc_plane_state *pla void get_clock_requirements_for_state(struct dc_state *state, struct AsicStateEx *info); +/* + * fast_validate: we return after determining if we can support the new state, + * but before we populate the programming info + */ enum dc_status dc_validate_global_state( struct dc *dc, - struct dc_state *new_ctx); + struct dc_state *new_ctx, + bool fast_validate); void dc_resource_state_construct( @@ -633,7 +750,8 @@ void dc_resource_state_destruct(struct dc_state *context); bool dc_commit_state(struct dc *dc, struct dc_state *context); -struct dc_state *dc_create_state(void); +struct dc_state *dc_create_state(struct dc *dc); +struct dc_state *dc_copy_state(struct dc_state *src_ctx); void dc_retain_state(struct dc_state *context); void dc_release_state(struct dc_state *context); @@ -645,9 +763,16 @@ struct dpcd_caps { union dpcd_rev dpcd_rev; union max_lane_count max_ln_count; union max_down_spread max_down_spread; + union dprx_feature dprx_feature; + + /* valid only for eDP v1.4 or higher*/ + uint8_t edp_supported_link_rates_count; + enum dc_link_rate edp_supported_link_rates[8]; /* dongle type (DP converter, CV smart dongle) */ enum display_dongle_type dongle_type; + /* branch device or sink device */ + bool is_branch_dev; /* Dongle's downstream count. */ union sink_count sink_count; /* If dongle_type == DISPLAY_DONGLE_DP_HDMI_CONVERTER, @@ -663,11 +788,11 @@ struct dpcd_caps { int8_t branch_dev_name[6]; int8_t branch_hw_revision; int8_t branch_fw_revision[2]; - uint8_t link_rate_set; bool allow_invalid_MSA_timing_param; bool panel_mode_edp; bool dpcd_display_control_capable; + bool ext_receiver_cap_field_present; }; #include "dc_link.h" |