1 files changed, 0 insertions, 249 deletions
diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c
deleted file mode 100644
index dd64dcf89c74..000000000000
--- a/drivers/cpufreq/qcom-cpufreq-kryo.c
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-/*
- * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
- * the CPU frequency subset and voltage value of each OPP varies
- * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
- * defines the voltage and frequency value based on the msm-id in SMEM
- * and speedbin blown in the efuse combination.
- * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
- * to provide the OPP framework with required information.
- * This is used to determine the voltage and frequency value for each OPP of
- * operating-points-v2 table when it is parsed by the OPP framework.
- */
-
-#include <linux/cpu.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/soc/qcom/smem.h>
-
-#define MSM_ID_SMEM	137
-
-enum _msm_id {
-	MSM8996V3 = 0xF6ul,
-	APQ8096V3 = 0x123ul,
-	MSM8996SG = 0x131ul,
-	APQ8096SG = 0x138ul,
-};
-
-enum _msm8996_version {
-	MSM8996_V3,
-	MSM8996_SG,
-	NUM_OF_MSM8996_VERSIONS,
-};
-
-static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
-
-static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
-{
-	size_t len;
-	u32 *msm_id;
-	enum _msm8996_version version;
-
-	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-	if (IS_ERR(msm_id))
-		return NUM_OF_MSM8996_VERSIONS;
-
-	/* The first 4 bytes are format, next to them is the actual msm-id */
-	msm_id++;
-
-	switch ((enum _msm_id)*msm_id) {
-	case MSM8996V3:
-	case APQ8096V3:
-		version = MSM8996_V3;
-		break;
-	case MSM8996SG:
-	case APQ8096SG:
-		version = MSM8996_SG;
-		break;
-	default:
-		version = NUM_OF_MSM8996_VERSIONS;
-	}
-
-	return version;
-}
-
-static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables;
-	enum _msm8996_version msm8996_version;
-	struct nvmem_cell *speedbin_nvmem;
-	struct device_node *np;
-	struct device *cpu_dev;
-	unsigned cpu;
-	u8 *speedbin;
-	u32 versions;
-	size_t len;
-	int ret;
-
-	cpu_dev = get_cpu_device(0);
-	if (!cpu_dev)
-		return -ENODEV;
-
-	msm8996_version = qcom_cpufreq_kryo_get_msm_id();
-	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-		dev_err(cpu_dev, "Not Snapdragon 820/821!");
-		return -ENODEV;
-	}
-
-	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
-	if (!np)
-		return -ENOENT;
-
-	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
-	if (!ret) {
-		of_node_put(np);
-		return -ENOENT;
-	}
-
-	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-	of_node_put(np);
-	if (IS_ERR(speedbin_nvmem)) {
-		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
-			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
-				PTR_ERR(speedbin_nvmem));
-		return PTR_ERR(speedbin_nvmem);
-	}
-
-	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
-	nvmem_cell_put(speedbin_nvmem);
-	if (IS_ERR(speedbin))
-		return PTR_ERR(speedbin);
-
-	switch (msm8996_version) {
-	case MSM8996_V3:
-		versions = 1 << (unsigned int)(*speedbin);
-		break;
-	case MSM8996_SG:
-		versions = 1 << ((unsigned int)(*speedbin) + 4);
-		break;
-	default:
-		BUG();
-		break;
-	}
-	kfree(speedbin);
-
-	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
-	if (!opp_tables)
-		return -ENOMEM;
-
-	for_each_possible_cpu(cpu) {
-		cpu_dev = get_cpu_device(cpu);
-		if (NULL == cpu_dev) {
-			ret = -ENODEV;
-			goto free_opp;
-		}
-
-		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
-							      &versions, 1);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
-			dev_err(cpu_dev, "Failed to set supported hardware\n");
-			goto free_opp;
-		}
-	}
-
-	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
-							  NULL, 0);
-	if (!IS_ERR(cpufreq_dt_pdev)) {
-		platform_set_drvdata(pdev, opp_tables);
-		return 0;
-	}
-
-	ret = PTR_ERR(cpufreq_dt_pdev);
-	dev_err(cpu_dev, "Failed to register platform device\n");
-
-free_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-	}
-	kfree(opp_tables);
-
-	return ret;
-}
-
-static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables = platform_get_drvdata(pdev);
-	unsigned int cpu;
-
-	platform_device_unregister(cpufreq_dt_pdev);
-
-	for_each_possible_cpu(cpu)
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-
-	kfree(opp_tables);
-
-	return 0;
-}
-
-static struct platform_driver qcom_cpufreq_kryo_driver = {
-	.probe = qcom_cpufreq_kryo_probe,
-	.remove = qcom_cpufreq_kryo_remove,
-	.driver = {
-		.name = "qcom-cpufreq-kryo",
-	},
-};
-
-static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
-	{ .compatible = "qcom,apq8096", },
-	{ .compatible = "qcom,msm8996", },
-	{}
-};
-
-/*
- * Since the driver depends on smem and nvmem drivers, which may
- * return EPROBE_DEFER, all the real activity is done in the probe,
- * which may be defered as well. The init here is only registering
- * the driver and the platform device.
- */
-static int __init qcom_cpufreq_kryo_init(void)
-{
-	struct device_node *np = of_find_node_by_path("/");
-	const struct of_device_id *match;
-	int ret;
-
-	if (!np)
-		return -ENODEV;
-
-	match = of_match_node(qcom_cpufreq_kryo_match_list, np);
-	of_node_put(np);
-	if (!match)
-		return -ENODEV;
-
-	ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
-	if (unlikely(ret < 0))
-		return ret;
-
-	kryo_cpufreq_pdev = platform_device_register_simple(
-		"qcom-cpufreq-kryo", -1, NULL, 0);
-	ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
-	if (0 == ret)
-		return 0;
-
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-	return ret;
-}
-module_init(qcom_cpufreq_kryo_init);
-
-static void __exit qcom_cpufreq_kryo_exit(void)
-{
-	platform_device_unregister(kryo_cpufreq_pdev);
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-}
-module_exit(qcom_cpufreq_kryo_exit);
-
-MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
-MODULE_LICENSE("GPL v2");