diff options
Diffstat (limited to 'drivers/ata/pata_cs5520.c')
| -rw-r--r-- | drivers/ata/pata_cs5520.c | 41 |
1 files changed, 26 insertions, 15 deletions
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 9f165a8e032d..1ce8fcfd7826 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -99,9 +99,9 @@ static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev) { /* Set the DMA enable/disable flag */ - u8 reg = inb(ap->ioaddr.bmdma_addr + 0x02); + u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02); reg |= 1<<(adev->devno + 5); - outb(reg, ap->ioaddr.bmdma_addr + 0x02); + iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02); } /** @@ -193,19 +193,20 @@ static struct ata_port_operations cs5520_port_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, }; static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { u8 pcicfg; + void *iomap[5]; static struct ata_probe_ent probe[2]; int ports = 0; @@ -236,6 +237,16 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic return -ENODEV; } + /* Map IO ports */ + iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8); + iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1); + iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8); + iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1); + iomap[4] = pcim_iomap(dev, 2, 0); + + if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) + return -ENOMEM; + /* We have to do our own plumbing as the PCI setup for this chipset is non-standard so we can't punt to the libata code */ @@ -249,10 +260,10 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic probe[0].irq_flags = 0; probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; probe[0].n_ports = 1; - probe[0].port[0].cmd_addr = 0x1F0; - probe[0].port[0].ctl_addr = 0x3F6; - probe[0].port[0].altstatus_addr = 0x3F6; - probe[0].port[0].bmdma_addr = pci_resource_start(dev, 2); + probe[0].port[0].cmd_addr = iomap[0]; + probe[0].port[0].ctl_addr = iomap[1]; + probe[0].port[0].altstatus_addr = iomap[1]; + probe[0].port[0].bmdma_addr = iomap[4]; /* The secondary lurks at different addresses but is otherwise the same beastie */ @@ -260,10 +271,10 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic probe[1] = probe[0]; INIT_LIST_HEAD(&probe[1].node); probe[1].irq = 15; - probe[1].port[0].cmd_addr = 0x170; - probe[1].port[0].ctl_addr = 0x376; - probe[1].port[0].altstatus_addr = 0x376; - probe[1].port[0].bmdma_addr = pci_resource_start(dev, 2) + 8; + probe[1].port[0].cmd_addr = iomap[2]; + probe[1].port[0].ctl_addr = iomap[3]; + probe[1].port[0].altstatus_addr = iomap[3]; + probe[1].port[0].bmdma_addr = iomap[4] + 8; /* Let libata fill in the port details */ ata_std_ports(&probe[0].port[0]); @@ -294,7 +305,7 @@ static void __devexit cs5520_remove_one(struct pci_dev *pdev) struct device *dev = pci_dev_to_dev(pdev); struct ata_host *host = dev_get_drvdata(dev); - ata_host_remove(host); + ata_host_detach(host); dev_set_drvdata(dev, NULL); } @@ -305,7 +316,7 @@ static void __devexit cs5520_remove_one(struct pci_dev *pdev) * Do any reconfiguration work needed by a resume from RAM. We need * to restore DMA mode support on BIOSen which disabled it */ - + static int cs5520_reinit_one(struct pci_dev *pdev) { u8 pcicfg; |