aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/common/sa1111.c59
-rw-r--r--arch/arm/include/asm/cputype.h1
-rw-r--r--arch/arm/include/asm/hardware/sa1111.h4
-rw-r--r--arch/arm/include/asm/proc-fns.h61
-rw-r--r--arch/arm/kernel/bugs.c4
-rw-r--r--arch/arm/kernel/head-common.S6
-rw-r--r--arch/arm/kernel/setup.c40
-rw-r--r--arch/arm/kernel/smp.c31
-rw-r--r--arch/arm/mach-pxa/Kconfig1
-rw-r--r--arch/arm/mach-pxa/include/mach/mainstone.h4
-rw-r--r--arch/arm/mach-pxa/lubbock.c16
-rw-r--r--arch/arm/mach-pxa/mainstone.c53
-rw-r--r--arch/arm/mach-sa1100/Kconfig2
-rw-r--r--arch/arm/mach-sa1100/assabet.c143
-rw-r--r--arch/arm/mach-sa1100/cerf.c11
-rw-r--r--arch/arm/mach-sa1100/generic.c10
-rw-r--r--arch/arm/mach-sa1100/h3100.c1
-rw-r--r--arch/arm/mach-sa1100/jornada720.c12
-rw-r--r--arch/arm/mach-sa1100/neponset.c19
-rw-r--r--arch/arm/mm/proc-macros.S10
-rw-r--r--arch/arm/mm/proc-v7-bugs.c17
-rw-r--r--arch/arm/mm/proc-v7.S2
-rw-r--r--arch/arm/vfp/vfpmodule.c2
23 files changed, 291 insertions, 218 deletions
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index a2c878769eaf..45412d21aa6b 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1282,65 +1282,6 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
}
EXPORT_SYMBOL(sa1111_get_audio_rate);
-void sa1111_set_io_dir(struct sa1111_dev *sadev,
- unsigned int bits, unsigned int dir,
- unsigned int sleep_dir)
-{
- struct sa1111 *sachip = sa1111_chip_driver(sadev);
- unsigned long flags;
- unsigned int val;
- void __iomem *gpio = sachip->base + SA1111_GPIO;
-
-#define MODIFY_BITS(port, mask, dir) \
- if (mask) { \
- val = readl_relaxed(port); \
- val &= ~(mask); \
- val |= (dir) & (mask); \
- writel_relaxed(val, port); \
- }
-
- spin_lock_irqsave(&sachip->lock, flags);
- MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir);
- MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8);
- MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16);
-
- MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir);
- MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8);
- MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
- spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_set_io_dir);
-
-void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
-{
- struct sa1111 *sachip = sa1111_chip_driver(sadev);
- unsigned long flags;
- unsigned int val;
- void __iomem *gpio = sachip->base + SA1111_GPIO;
-
- spin_lock_irqsave(&sachip->lock, flags);
- MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v);
- MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8);
- MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
- spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_set_io);
-
-void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
-{
- struct sa1111 *sachip = sa1111_chip_driver(sadev);
- unsigned long flags;
- unsigned int val;
- void __iomem *gpio = sachip->base + SA1111_GPIO;
-
- spin_lock_irqsave(&sachip->lock, flags);
- MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v);
- MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8);
- MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
- spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-
/*
* Individual device operations.
*/
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 0d289240b6ca..775cac3c02bb 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -111,6 +111,7 @@
#include <linux/kernel.h>
extern unsigned int processor_id;
+struct proc_info_list *lookup_processor(u32 midr);
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 798e520e8a49..d134b9a5ff94 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -433,10 +433,6 @@ int sa1111_check_dma_bug(dma_addr_t addr);
int sa1111_driver_register(struct sa1111_driver *);
void sa1111_driver_unregister(struct sa1111_driver *);
-void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir);
-void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
-void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
-
struct sa1111_platform_data {
int irq_base; /* base for cascaded on-chip IRQs */
unsigned disable_devs;
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index e25f4392e1b2..e1b6f280ab08 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -23,7 +23,7 @@ struct mm_struct;
/*
* Don't change this structure - ASM code relies on it.
*/
-extern struct processor {
+struct processor {
/* MISC
* get data abort address/flags
*/
@@ -79,9 +79,13 @@ extern struct processor {
unsigned int suspend_size;
void (*do_suspend)(void *);
void (*do_resume)(void *);
-} processor;
+};
#ifndef MULTI_CPU
+static inline void init_proc_vtable(const struct processor *p)
+{
+}
+
extern void cpu_proc_init(void);
extern void cpu_proc_fin(void);
extern int cpu_do_idle(void);
@@ -98,17 +102,50 @@ extern void cpu_reset(unsigned long addr, bool hvc) __attribute__((noreturn));
extern void cpu_do_suspend(void *);
extern void cpu_do_resume(void *);
#else
-#define cpu_proc_init processor._proc_init
-#define cpu_proc_fin processor._proc_fin
-#define cpu_reset processor.reset
-#define cpu_do_idle processor._do_idle
-#define cpu_dcache_clean_area processor.dcache_clean_area
-#define cpu_set_pte_ext processor.set_pte_ext
-#define cpu_do_switch_mm processor.switch_mm
-/* These three are private to arch/arm/kernel/suspend.c */
-#define cpu_do_suspend processor.do_suspend
-#define cpu_do_resume processor.do_resume
+extern struct processor processor;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+#include <linux/smp.h>
+/*
+ * This can't be a per-cpu variable because we need to access it before
+ * per-cpu has been initialised. We have a couple of functions that are
+ * called in a pre-emptible context, and so can't use smp_processor_id()
+ * there, hence PROC_TABLE(). We insist in init_proc_vtable() that the
+ * function pointers for these are identical across all CPUs.
+ */
+extern struct processor *cpu_vtable[];
+#define PROC_VTABLE(f) cpu_vtable[smp_processor_id()]->f
+#define PROC_TABLE(f) cpu_vtable[0]->f
+static inline void init_proc_vtable(const struct processor *p)
+{
+ unsigned int cpu = smp_processor_id();
+ *cpu_vtable[cpu] = *p;
+ WARN_ON_ONCE(cpu_vtable[cpu]->dcache_clean_area !=
+ cpu_vtable[0]->dcache_clean_area);
+ WARN_ON_ONCE(cpu_vtable[cpu]->set_pte_ext !=
+ cpu_vtable[0]->set_pte_ext);
+}
+#else
+#define PROC_VTABLE(f) processor.f
+#define PROC_TABLE(f) processor.f
+static inline void init_proc_vtable(const struct processor *p)
+{
+ processor = *p;
+}
+#endif
+
+#define cpu_proc_init PROC_VTABLE(_proc_init)
+#define cpu_check_bugs PROC_VTABLE(check_bugs)
+#define cpu_proc_fin PROC_VTABLE(_proc_fin)
+#define cpu_reset PROC_VTABLE(reset)
+#define cpu_do_idle PROC_VTABLE(_do_idle)
+#define cpu_dcache_clean_area PROC_TABLE(dcache_clean_area)
+#define cpu_set_pte_ext PROC_TABLE(set_pte_ext)
+#define cpu_do_switch_mm PROC_VTABLE(switch_mm)
+
+/* These two are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend PROC_VTABLE(do_suspend)
+#define cpu_do_resume PROC_VTABLE(do_resume)
#endif
extern void cpu_resume(void);
diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c
index 7be511310191..d41d3598e5e5 100644
--- a/arch/arm/kernel/bugs.c
+++ b/arch/arm/kernel/bugs.c
@@ -6,8 +6,8 @@
void check_other_bugs(void)
{
#ifdef MULTI_CPU
- if (processor.check_bugs)
- processor.check_bugs();
+ if (cpu_check_bugs)
+ cpu_check_bugs();
#endif
}
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 6e0375e7db05..997b02302c31 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -145,6 +145,9 @@ __mmap_switched_data:
#endif
.size __mmap_switched_data, . - __mmap_switched_data
+ __FINIT
+ .text
+
/*
* This provides a C-API version of __lookup_processor_type
*/
@@ -156,9 +159,6 @@ ENTRY(lookup_processor_type)
ldmfd sp!, {r4 - r6, r9, pc}
ENDPROC(lookup_processor_type)
- __FINIT
- .text
-
/*
* Read processor ID register (CP#15, CR0), and look up in the linker-built
* supported processor list. Note that we can't use the absolute addresses
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index ac7e08886863..375b13f7e780 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -114,6 +114,11 @@ EXPORT_SYMBOL(elf_hwcap2);
#ifdef MULTI_CPU
struct processor processor __ro_after_init;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+struct processor *cpu_vtable[NR_CPUS] = {
+ [0] = &processor,
+};
+#endif
#endif
#ifdef MULTI_TLB
struct cpu_tlb_fns cpu_tlb __ro_after_init;
@@ -666,28 +671,33 @@ static void __init smp_build_mpidr_hash(void)
}
#endif
-static void __init setup_processor(void)
+/*
+ * locate processor in the list of supported processor types. The linker
+ * builds this table for us from the entries in arch/arm/mm/proc-*.S
+ */
+struct proc_info_list *lookup_processor(u32 midr)
{
- struct proc_info_list *list;
+ struct proc_info_list *list = lookup_processor_type(midr);
- /*
- * locate processor in the list of supported processor
- * types. The linker builds this table for us from the
- * entries in arch/arm/mm/proc-*.S
- */
- list = lookup_processor_type(read_cpuid_id());
if (!list) {
- pr_err("CPU configuration botched (ID %08x), unable to continue.\n",
- read_cpuid_id());
- while (1);
+ pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n",
+ smp_processor_id(), midr);
+ while (1)
+ /* can't use cpu_relax() here as it may require MMU setup */;
}
+ return list;
+}
+
+static void __init setup_processor(void)
+{
+ unsigned int midr = read_cpuid_id();
+ struct proc_info_list *list = lookup_processor(midr);
+
cpu_name = list->cpu_name;
__cpu_architecture = __get_cpu_architecture();
-#ifdef MULTI_CPU
- processor = *list->proc;
-#endif
+ init_proc_vtable(list->proc);
#ifdef MULTI_TLB
cpu_tlb = *list->tlb;
#endif
@@ -699,7 +709,7 @@ static void __init setup_processor(void)
#endif
pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
- cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+ list->cpu_name, midr, midr & 15,
proc_arch[cpu_architecture()], get_cr());
snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index f574a5e0d589..3bf82232b1be 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -42,6 +42,7 @@
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
+#include <asm/procinfo.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
@@ -102,6 +103,30 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
#endif
}
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+ if (!cpu_vtable[cpu])
+ cpu_vtable[cpu] = kzalloc(sizeof(*cpu_vtable[cpu]), GFP_KERNEL);
+
+ return cpu_vtable[cpu] ? 0 : -ENOMEM;
+}
+
+static void secondary_biglittle_init(void)
+{
+ init_proc_vtable(lookup_processor(read_cpuid_id())->proc);
+}
+#else
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+ return 0;
+}
+
+static void secondary_biglittle_init(void)
+{
+}
+#endif
+
int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
@@ -109,6 +134,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
if (!smp_ops.smp_boot_secondary)
return -ENOSYS;
+ ret = secondary_biglittle_prepare(cpu);
+ if (ret)
+ return ret;
+
/*
* We need to tell the secondary core where to find
* its stack and the page tables.
@@ -359,6 +388,8 @@ asmlinkage void secondary_start_kernel(void)
struct mm_struct *mm = &init_mm;
unsigned int cpu;
+ secondary_biglittle_init();
+
/*
* The identity mapping is uncached (strongly ordered), so
* switch away from it before attempting any exclusive accesses.
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 0853eb2818b7..7298d07a9f71 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -46,6 +46,7 @@ config ARCH_LUBBOCK
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ select GPIO_REG
select PXA27x
config MACH_ZYLONITE
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index e82a7d31104e..474041a83d80 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -119,6 +119,10 @@
#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
+#define MST_PCMCIA_INPUTS \
+ (MST_PCMCIA_nIRQ | MST_PCMCIA_nSPKR_BVD2 | MST_PCMCIA_nSTSCHG_BVD1 | \
+ MST_PCMCIA_nVS2 | MST_PCMCIA_nVS1 | MST_PCMCIA_nCD)
+
/* board specific IRQs */
#define MAINSTONE_NR_IRQS IRQ_BOARD_START
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index fe2ef9b78602..8e24455facd8 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -136,10 +136,26 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
// no D+ pullup; lubbock can't connect/disconnect in software
};
+/* GPIOs for SA1111 PCMCIA */
+static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
+ .dev_id = "1800",
+ .table = {
+ { "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
+ { "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
+ { "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
+ { "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
+ { "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
+ { "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
+ { },
+ },
+};
+
static void lubbock_init_pcmcia(void)
{
struct clk *clk;
+ gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
+
/* Add an alias for the SA1111 PCMCIA clock */
clk = clk_get_sys("pxa2xx-pcmcia", NULL);
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index afd62a94fdbf..d40de190d630 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/gpio-reg.h>
#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -507,12 +508,64 @@ static void __init mainstone_init_keypad(void)
static inline void mainstone_init_keypad(void) {}
#endif
+static int mst_pcmcia0_irqs[11] = {
+ [0 ... 10] = -1,
+ [5] = MAINSTONE_S0_CD_IRQ,
+ [8] = MAINSTONE_S0_STSCHG_IRQ,
+ [10] = MAINSTONE_S0_IRQ,
+};
+
+static int mst_pcmcia1_irqs[11] = {
+ [0 ... 10] = -1,
+ [5] = MAINSTONE_S1_CD_IRQ,
+ [8] = MAINSTONE_S1_STSCHG_IRQ,
+ [10] = MAINSTONE_S1_IRQ,
+};
+
+static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
+ .dev_id = "pxa2xx-pcmcia",
+ .table = {
+ GPIO_LOOKUP("mst-pcmcia0", 0, "a0vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 1, "a1vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 2, "a0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 3, "a1vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 4, "areset", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 5, "adetect", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia0", 6, "avs1", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia0", 7, "avs2", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia0", 8, "abvd1", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 9, "abvd2", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 10, "aready", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 0, "b0vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 1, "b1vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 2, "b0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 3, "b1vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 4, "breset", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 5, "bdetect", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia1", 6, "bvs1", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia1", 7, "bvs2", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia1", 8, "bbvd1", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 9, "bbvd2", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 10, "bready", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init mainstone_init(void)
{
int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+ /* Register board control register(s) as GPIOs */
+ gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
+ "mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
+ NULL, mst_pcmcia0_irqs);
+ gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
+ "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
+ NULL, mst_pcmcia1_irqs);
+ gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
+
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index fde7ef1ab192..af15ae50b5a2 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -6,6 +6,7 @@ config SA1100_ASSABET
bool "Assabet"
select ARM_SA1110_CPUFREQ
select GPIO_REG
+ select LEDS_GPIO_REGISTER
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
help
@@ -24,6 +25,7 @@ config ASSABET_NEPONSET
config SA1100_CERF
bool "CerfBoard"
select ARM_SA1110_CPUFREQ
+ select LEDS_GPIO_REGISTER
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 3e8c0948abcc..dfa42496ec27 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/gpio/gpio-reg.h>
#include <linux/gpio/machine.h>
+#include <linux/gpio_keys.h>
#include <linux/ioport.h>
#include <linux/platform_data/sa11x0-serial.h>
#include <linux/regulator/fixed.h>
@@ -101,7 +102,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
assabet_bcr_gc = gc;
- return 0;
+ return gc->base;
}
/*
@@ -479,6 +480,49 @@ static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = {
},
};
+static struct gpio_led assabet_leds[] __initdata = {
+ {
+ .name = "assabet:red",
+ .default_trigger = "cpu0",
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ }, {
+ .name = "assabet:green",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+};
+
+static const struct gpio_led_platform_data assabet_leds_pdata __initconst = {
+ .num_leds = ARRAY_SIZE(assabet_leds),
+ .leds = assabet_leds,
+};
+
+static struct gpio_keys_button assabet_keys_buttons[] = {
+ {
+ .gpio = 0,
+ .irq = IRQ_GPIO0,
+ .desc = "gpio0",
+ .wakeup = 1,
+ .can_disable = 1,
+ .debounce_interval = 5,
+ }, {
+ .gpio = 1,
+ .irq = IRQ_GPIO1,
+ .desc = "gpio1",
+ .wakeup = 1,
+ .can_disable = 1,
+ .debounce_interval = 5,
+ },
+};
+
+static const struct gpio_keys_platform_data assabet_keys_pdata = {
+ .buttons = assabet_keys_buttons,
+ .nbuttons = ARRAY_SIZE(assabet_keys_buttons),
+ .rep = 0,
+};
+
static void __init assabet_init(void)
{
/*
@@ -533,6 +577,13 @@ static void __init assabet_init(void)
}
+ platform_device_register_resndata(NULL, "gpio-keys", 0,
+ NULL, 0,
+ &assabet_keys_pdata,
+ sizeof(assabet_keys_pdata));
+
+ gpio_led_register_device(-1, &assabet_leds_pdata);
+
#ifndef ASSABET_PAL_VIDEO
sa11x0_register_lcd(&lq039q2ds54_info);
#else
@@ -726,92 +777,9 @@ static void __init assabet_map_io(void)
sa1100_register_uart(2, 3);
}
-/* LEDs */
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct assabet_led {
- struct led_classdev cdev;
- u32 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
- const char *name;
- const char *trigger;
-} assabet_leds[] = {
- { "assabet:red", "cpu0",},
- { "assabet:green", "heartbeat", },
-};
-
-/*
- * The LED control in Assabet is reversed:
- * - setting bit means turn off LED
- * - clearing bit means turn on LED
- */
-static void assabet_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- struct assabet_led *led = container_of(cdev,
- struct assabet_led, cdev);
-
- if (b != LED_OFF)
- ASSABET_BCR_clear(led->mask);
- else
- ASSABET_BCR_set(led->mask);
-}
-
-static enum led_brightness assabet_led_get(struct led_classdev *cdev)
-{
- struct assabet_led *led = container_of(cdev,
- struct assabet_led, cdev);
-
- return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init assabet_leds_init(void)
-{
- int i;
-
- if (!machine_is_assabet())
- return -ENODEV;
-
- for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
- struct assabet_led *led;
-
- led = kzalloc(sizeof(*led), GFP_KERNEL);
- if (!led)
- break;
-
- led->cdev.name = assabet_leds[i].name;
- led->cdev.brightness_set = assabet_led_set;
- led->cdev.brightness_get = assabet_led_get;
- led->cdev.default_trigger = assabet_leds[i].trigger;
-
- if (!i)
- led->mask = ASSABET_BCR_LED_RED;
- else
- led->mask = ASSABET_BCR_LED_GREEN;
-
- if (led_classdev_register(NULL, &led->cdev) < 0) {
- kfree(led);
- break;
- }
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(assabet_leds_init);
-#endif
-
void __init assabet_init_irq(void)
{
+ unsigned int assabet_gpio_base;
u32 def_val;
sa1100_init_irq();
@@ -826,7 +794,10 @@ void __init assabet_init_irq(void)
*
* This must precede any driver calls to BCR_set() or BCR_clear().
*/
- assabet_init_gpio((void *)&ASSABET_BCR, def_val);
+ assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val);
+
+ assabet_leds[0].gpio = assabet_gpio_base + 13;
+ assabet_leds[1].gpio = assabet_gpio_base + 14;
}
MACHINE_START(ASSABET, "Intel-Assabet")
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index b2a4b41626ef..88e526561a24 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -89,18 +89,8 @@ static struct gpio_led_platform_data cerf_gpio_led_info = {
.num_leds = ARRAY_SIZE(cerf_gpio_leds),
};
-static struct platform_device cerf_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &cerf_gpio_led_info,
- }
-};
-
-
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
- &cerf_leds,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
@@ -176,6 +166,7 @@ static void __init cerf_init(void)
{
sa11x0_ppc_configure_mcp();
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
+ gpio_led_register_device(-1, &cerf_gpio_led_info);
sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
sa11x0_register_mcp(&cerf_mcp_data);
sa11x0_register_pcmcia(1, &cerf_cf_gpio_table);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 800321c6cbd8..755290bf658b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -235,18 +235,11 @@ void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
sa11x0_register_device(&sa11x0fb_device, inf);
}
-static bool sa11x0pcmcia_legacy = true;
-static struct platform_device sa11x0pcmcia_device = {
- .name = "sa11x0-pcmcia",
- .id = -1,
-};
-
void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *table)
{
if (table)
gpiod_add_lookup_table(table);
platform_device_register_simple("sa11x0-pcmcia", socket, NULL, 0);
- sa11x0pcmcia_legacy = false;
}
static struct platform_device sa11x0mtd_device = {
@@ -331,9 +324,6 @@ static int __init sa1100_init(void)
{
pm_power_off = sa1100_power_off;
- if (sa11x0pcmcia_legacy)
- platform_device_register(&sa11x0pcmcia_device);
-
regulator_has_full_constraints();
return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index c6b412054a3c..9dc5bcb7326b 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -126,6 +126,7 @@ static void __init h3100_mach_init(void)
{
h3xxx_mach_init();
+ sa11x0_register_pcmcia(-1, NULL);
sa11x0_register_lcd(&h3100_lcd_info);
sa11x0_register_irda(&h3100_irda_data);
}
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 0a2ca9be00e6..6298bad09ef3 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -190,6 +190,17 @@ static struct platform_device s1d13xxxfb_device = {
.resource = s1d13xxxfb_resources,
};
+static struct gpiod_lookup_table jornada_pcmcia_gpiod_table = {
+ .dev_id = "1800",
+ .table = {
+ GPIO_LOOKUP("sa1111", 0, "s0-power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 1, "s1-power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 2, "s0-3v", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 3, "s1-3v", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct resource sa1111_resources[] = {
[0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
[1] = DEFINE_RES_IRQ(IRQ_GPIO1),
@@ -265,6 +276,7 @@ static int __init jornada720_init(void)
udelay(20); /* give it some time to restart */
gpiod_add_lookup_table(&jornada_ts_gpiod_table);
+ gpiod_add_lookup_table(&jornada_pcmcia_gpiod_table);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index b1823f445358..eb60a71cf125 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -5,6 +5,7 @@
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/gpio-reg.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
@@ -96,6 +97,19 @@ struct neponset_drvdata {
struct gpio_chip *gpio[4];
};
+static struct gpiod_lookup_table neponset_pcmcia_table = {
+ .dev_id = "1800",
+ .table = {
+ GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct neponset_drvdata *nep;
void neponset_ncr_frob(unsigned int mask, unsigned int val)
@@ -374,6 +388,8 @@ static int neponset_probe(struct platform_device *dev)
d->base + AUD_CTL, AUD_NGPIO, false,
neponset_aud_names);
+ gpiod_add_lookup_table(&neponset_pcmcia_table);
+
/*
* We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
* something on the Neponset activates this IRQ on sleep (eth?)
@@ -424,6 +440,9 @@ static int neponset_remove(struct platform_device *dev)
platform_device_unregister(d->sa1111);
if (!IS_ERR(d->smc91x))
platform_device_unregister(d->smc91x);
+
+ gpiod_remove_lookup_table(&neponset_pcmcia_table);
+
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);
nep = NULL;
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 81d0efb055c6..5461d589a1e2 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -274,6 +274,13 @@
.endm
.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0
+/*
+ * If we are building for big.Little with branch predictor hardening,
+ * we need the processor function tables to remain available after boot.
+ */
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+ .section ".rodata"
+#endif
.type \name\()_processor_functions, #object
.align 2
ENTRY(\name\()_processor_functions)
@@ -309,6 +316,9 @@ ENTRY(\name\()_processor_functions)
.endif
.size \name\()_processor_functions, . - \name\()_processor_functions
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+ .previous
+#endif
.endm
.macro define_cache_functions name:req
diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 5544b82a2e7a..9a07916af8dd 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -52,8 +52,6 @@ static void cpu_v7_spectre_init(void)
case ARM_CPU_PART_CORTEX_A17:
case ARM_CPU_PART_CORTEX_A73:
case ARM_CPU_PART_CORTEX_A75:
- if (processor.switch_mm != cpu_v7_bpiall_switch_mm)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
harden_branch_predictor_bpiall;
spectre_v2_method = "BPIALL";
@@ -61,8 +59,6 @@ static void cpu_v7_spectre_init(void)
case ARM_CPU_PART_CORTEX_A15:
case ARM_CPU_PART_BRAHMA_B15:
- if (processor.switch_mm != cpu_v7_iciallu_switch_mm)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
harden_branch_predictor_iciallu;
spectre_v2_method = "ICIALLU";
@@ -88,11 +84,9 @@ static void cpu_v7_spectre_init(void)
ARM_SMCCC_ARCH_WORKAROUND_1, &res);
if ((int)res.a0 != 0)
break;
- if (processor.switch_mm != cpu_v7_hvc_switch_mm && cpu)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
call_hvc_arch_workaround_1;
- processor.switch_mm = cpu_v7_hvc_switch_mm;
+ cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
spectre_v2_method = "hypervisor";
break;
@@ -101,11 +95,9 @@ static void cpu_v7_spectre_init(void)
ARM_SMCCC_ARCH_WORKAROUND_1, &res);
if ((int)res.a0 != 0)
break;
- if (processor.switch_mm != cpu_v7_smc_switch_mm && cpu)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
call_smc_arch_workaround_1;
- processor.switch_mm = cpu_v7_smc_switch_mm;
+ cpu_do_switch_mm = cpu_v7_smc_switch_mm;
spectre_v2_method = "firmware";
break;
@@ -119,11 +111,6 @@ static void cpu_v7_spectre_init(void)
if (spectre_v2_method)
pr_info("CPU%u: Spectre v2: using %s workaround\n",
smp_processor_id(), spectre_v2_method);
- return;
-
-bl_error:
- pr_err("CPU%u: Spectre v2: incorrect context switching function, system vulnerable\n",
- cpu);
}
#else
static void cpu_v7_spectre_init(void)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 6fe52819e014..339eb17c9808 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -112,7 +112,7 @@ ENTRY(cpu_v7_hvc_switch_mm)
hvc #0
ldmfd sp!, {r0 - r3}
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
#endif
ENTRY(cpu_v7_iciallu_switch_mm)
mov r3, #0
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index aff6e6eadc70..ee7b07938dd5 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -573,7 +573,7 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp,
*/
ufp_exc->fpexc = hwstate->fpexc;
ufp_exc->fpinst = hwstate->fpinst;
- ufp_exc->fpinst2 = ufp_exc->fpinst2;
+ ufp_exc->fpinst2 = hwstate->fpinst2;
/* Ensure that VFP is disabled. */
vfp_flush_hwstate(thread);