diff options
Diffstat (limited to 'arch/x86/lguest/boot.c')
| -rw-r--r-- | arch/x86/lguest/boot.c | 1558 |
1 files changed, 0 insertions, 1558 deletions
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c deleted file mode 100644 index 99472698c931..000000000000 --- a/arch/x86/lguest/boot.c +++ /dev/null @@ -1,1558 +0,0 @@ -/*P:010 - * A hypervisor allows multiple Operating Systems to run on a single machine. - * To quote David Wheeler: "Any problem in computer science can be solved with - * another layer of indirection." - * - * We keep things simple in two ways. First, we start with a normal Linux - * kernel and insert a module (lg.ko) which allows us to run other Linux - * kernels the same way we'd run processes. We call the first kernel the Host, - * and the others the Guests. The program which sets up and configures Guests - * (such as the example in tools/lguest/lguest.c) is called the Launcher. - * - * Secondly, we only run specially modified Guests, not normal kernels: setting - * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows - * how to be a Guest at boot time. This means that you can use the same kernel - * you boot normally (ie. as a Host) as a Guest. - * - * These Guests know that they cannot do privileged operations, such as disable - * interrupts, and that they have to ask the Host to do such things explicitly. - * This file consists of all the replacements for such low-level native - * hardware operations: these special Guest versions call the Host. - * - * So how does the kernel know it's a Guest? We'll see that later, but let's - * just say that we end up here where we replace the native functions various - * "paravirt" structures with our Guest versions, then boot like normal. -:*/ - -/* - * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/kernel.h> -#include <linux/start_kernel.h> -#include <linux/string.h> -#include <linux/console.h> -#include <linux/screen_info.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/lguest.h> -#include <linux/lguest_launcher.h> -#include <linux/virtio_console.h> -#include <linux/pm.h> -#include <linux/export.h> -#include <linux/pci.h> -#include <linux/virtio_pci.h> -#include <asm/acpi.h> -#include <asm/apic.h> -#include <asm/lguest.h> -#include <asm/paravirt.h> -#include <asm/param.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/desc.h> -#include <asm/setup.h> -#include <asm/e820/api.h> -#include <asm/mce.h> -#include <asm/io.h> -#include <asm/fpu/api.h> -#include <asm/stackprotector.h> -#include <asm/reboot.h> /* for struct machine_ops */ -#include <asm/kvm_para.h> -#include <asm/pci_x86.h> -#include <asm/pci-direct.h> - -/*G:010 - * Welcome to the Guest! - * - * The Guest in our tale is a simple creature: identical to the Host but - * behaving in simplified but equivalent ways. In particular, the Guest is the - * same kernel as the Host (or at least, built from the same source code). -:*/ - -struct lguest_data lguest_data = { - .hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF }, - .noirq_iret = (u32)lguest_noirq_iret, - .kernel_address = PAGE_OFFSET, - .blocked_interrupts = { 1 }, /* Block timer interrupts */ - .syscall_vec = IA32_SYSCALL_VECTOR, -}; - -/*G:037 - * async_hcall() is pretty simple: I'm quite proud of it really. We have a - * ring buffer of stored hypercalls which the Host will run though next time we - * do a normal hypercall. Each entry in the ring has 5 slots for the hypercall - * arguments, and a "hcall_status" word which is 0 if the call is ready to go, - * and 255 once the Host has finished with it. - * - * If we come around to a slot which hasn't been finished, then the table is - * full and we just make the hypercall directly. This has the nice side - * effect of causing the Host to run all the stored calls in the ring buffer - * which empties it for next time! - */ -static void async_hcall(unsigned long call, unsigned long arg1, - unsigned long arg2, unsigned long arg3, - unsigned long arg4) -{ - /* Note: This code assumes we're uniprocessor. */ - static unsigned int next_call; - unsigned long flags; - - /* - * Disable interrupts if not already disabled: we don't want an - * interrupt handler making a hypercall while we're already doing - * one! - */ - local_irq_save(flags); - if (lguest_data.hcall_status[next_call] != 0xFF) { - /* Table full, so do normal hcall which will flush table. */ - hcall(call, arg1, arg2, arg3, arg4); - } else { - lguest_data.hcalls[next_call].arg0 = call; - lguest_data.hcalls[next_call].arg1 = arg1; - lguest_data.hcalls[next_call].arg2 = arg2; - lguest_data.hcalls[next_call].arg3 = arg3; - lguest_data.hcalls[next_call].arg4 = arg4; - /* Arguments must all be written before we mark it to go */ - wmb(); - lguest_data.hcall_status[next_call] = 0; - if (++next_call == LHCALL_RING_SIZE) - next_call = 0; - } - local_irq_restore(flags); -} - -/*G:035 - * Notice the lazy_hcall() above, rather than hcall(). This is our first real - * optimization trick! - * - * When lazy_mode is set, it means we're allowed to defer all hypercalls and do - * them as a batch when lazy_mode is eventually turned off. Because hypercalls - * are reasonably expensive, batching them up makes sense. For example, a - * large munmap might update dozens of page table entries: that code calls - * paravirt_enter_lazy_mmu(), does the dozen updates, then calls - * lguest_leave_lazy_mode(). - * - * So, when we're in lazy mode, we call async_hcall() to store the call for - * future processing: - */ -static void lazy_hcall1(unsigned long call, unsigned long arg1) -{ - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) - hcall(call, arg1, 0, 0, 0); - else - async_hcall(call, arg1, 0, 0, 0); -} - -/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/ -static void lazy_hcall2(unsigned long call, - unsigned long arg1, - unsigned long arg2) -{ - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) - hcall(call, arg1, arg2, 0, 0); - else - async_hcall(call, arg1, arg2, 0, 0); -} - -static void lazy_hcall3(unsigned long call, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3) -{ - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) - hcall(call, arg1, arg2, arg3, 0); - else - async_hcall(call, arg1, arg2, arg3, 0); -} - -#ifdef CONFIG_X86_PAE -static void lazy_hcall4(unsigned long call, - unsigned long arg1, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4) -{ - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) - hcall(call, arg1, arg2, arg3, arg4); - else - async_hcall(call, arg1, arg2, arg3, arg4); -} -#endif - -/*G:036 - * When lazy mode is turned off, we issue the do-nothing hypercall to - * flush any stored calls, and call the generic helper to reset the - * per-cpu lazy mode variable. - */ -static void lguest_leave_lazy_mmu_mode(void) -{ - hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0); - paravirt_leave_lazy_mmu(); -} - -/* - * We also catch the end of context switch; we enter lazy mode for much of - * that too, so again we need to flush here. - * - * (Technically, this is lazy CPU mode, and normally we're in lazy MMU - * mode, but unlike Xen, lguest doesn't care about the difference). - */ -static void lguest_end_context_switch(struct task_struct *next) -{ - hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0); - paravirt_end_context_switch(next); -} - -/*G:032 - * After that diversion we return to our first native-instruction - * replacements: four functions for interrupt control. - * - * The simplest way of implementing these would be to have "turn interrupts - * off" and "turn interrupts on" hypercalls. Unfortunately, this is too slow: - * these are by far the most commonly called functions of those we override. - * - * So instead we keep an "irq_enabled" field inside our "struct lguest_data", - * which the Guest can update with a single instruction. The Host knows to - * check there before it tries to deliver an interrupt. - */ - -/* - * save_flags() is expected to return the processor state (ie. "flags"). The - * flags word contains all kind of stuff, but in practice Linux only cares - * about the interrupt flag. Our "save_flags()" just returns that. - */ -asmlinkage __visible unsigned long lguest_save_fl(void) -{ - return lguest_data.irq_enabled; -} - -/* Interrupts go off... */ -asmlinkage __visible void lguest_irq_disable(void) -{ - lguest_data.irq_enabled = 0; -} - -/* - * Let's pause a moment. Remember how I said these are called so often? - * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to - * break some rules. In particular, these functions are assumed to save their - * own registers if they need to: normal C functions assume they can trash the - * eax register. To use normal C functions, we use - * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the - * C function, then restores it. - */ -PV_CALLEE_SAVE_REGS_THUNK(lguest_save_fl); -PV_CALLEE_SAVE_REGS_THUNK(lguest_irq_disable); -/*:*/ - -/* These are in head_32.S */ -extern void lg_irq_enable(void); -extern void lg_restore_fl(unsigned long flags); - -/*M:003 - * We could be more efficient in our checking of outstanding interrupts, rather - * than using a branch. One way would be to put the "irq_enabled" field in a - * page by itself, and have the Host write-protect it when an interrupt comes - * in when irqs are disabled. There will then be a page fault as soon as - * interrupts are re-enabled. - * - * A better method is to implement soft interrupt disable generally for x86: - * instead of disabling interrupts, we set a flag. If an interrupt does come - * in, we then disable them for real. This is uncommon, so we could simply use - * a hypercall for interrupt control and not worry about efficiency. -:*/ - -/*G:034 - * The Interrupt Descriptor Table (IDT). - * - * The IDT tells the processor what to do when an interrupt comes in. Each - * entry in the table is a 64-bit descriptor: this holds the privilege level, - * address of the handler, and... well, who cares? The Guest just asks the - * Host to make the change anyway, because the Host controls the real IDT. - */ -static void lguest_write_idt_entry(gate_desc *dt, - int entrynum, const gate_desc *g) -{ - /* - * The gate_desc structure is 8 bytes long: we hand it to the Host in - * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors - * around like this; typesafety wasn't a big concern in Linux's early - * years. - */ - u32 *desc = (u32 *)g; - /* Keep the local copy up to date. */ - native_write_idt_entry(dt, entrynum, g); - /* Tell Host about this new entry. */ - hcall(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1], 0); -} - -/* - * Changing to a different IDT is very rare: we keep the IDT up-to-date every - * time it is written, so we can simply loop through all entries and tell the - * Host about them. - */ -static void lguest_load_idt(const struct desc_ptr *desc) -{ - unsigned int i; - struct desc_struct *idt = (void *)desc->address; - - for (i = 0; i < (desc->size+1)/8; i++) - hcall(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b, 0); -} - -/* - * The Global Descriptor Table. - * - * The Intel architecture defines another table, called the Global Descriptor - * Table (GDT). You tell the CPU where it is (and its size) using the "lgdt" - * instruction, and then several other instructions refer to entries in the - * table. There are three entries which the Switcher needs, so the Host simply - * controls the entire thing and the Guest asks it to make changes using the - * LOAD_GDT hypercall. - * - * This is the exactly like the IDT code. - */ -static void lguest_load_gdt(const struct desc_ptr *desc) -{ - unsigned int i; - struct desc_struct *gdt = (void *)desc->address; - - for (i = 0; i < (desc->size+1)/8; i++) - hcall(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b, 0); -} - -/* - * For a single GDT entry which changes, we simply change our copy and - * then tell the host about it. - */ -static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum, - const void *desc, int type) -{ - native_write_gdt_entry(dt, entrynum, desc, type); - /* Tell Host about this new entry. */ - hcall(LHCALL_LOAD_GDT_ENTRY, entrynum, - dt[entrynum].a, dt[entrynum].b, 0); -} - -/* - * There are three "thread local storage" GDT entries which change - * on every context switch (these three entries are how glibc implements - * __thread variables). As an optimization, we have a hypercall - * specifically for this case. - * - * Wouldn't it be nicer to have a general LOAD_GDT_ENTRIES hypercall - * which took a range of entries? - */ -static void lguest_load_tls(struct thread_struct *t, unsigned int cpu) -{ - /* - * There's one problem which normal hardware doesn't have: the Host - * can't handle us removing entries we're currently using. So we clear - * the GS register here: if it's needed it'll be reloaded anyway. - */ - lazy_load_gs(0); - lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu); -} - -/*G:038 - * That's enough excitement for now, back to ploughing through each of the - * different pv_ops structures (we're about 1/3 of the way through). - * - * This is the Local Descriptor Table, another weird Intel thingy. Linux only - * uses this for some strange applications like Wine. We don't do anything - * here, so they'll get an informative and friendly Segmentation Fault. - */ -static void lguest_set_ldt(const void *addr, unsigned entries) -{ -} - -/* - * This loads a GDT entry into the "Task Register": that entry points to a - * structure called the Task State Segment. Some comments scattered though the - * kernel code indicate that this used for task switching in ages past, along - * with blood sacrifice and astrology. - * - * Now there's nothing interesting in here that we don't get told elsewhere. - * But the native version uses the "ltr" instruction, which makes the Host - * complain to the Guest about a Segmentation Fault and it'll oops. So we - * override the native version with a do-nothing version. - */ -static void lguest_load_tr_desc(void) -{ -} - -/* - * The "cpuid" instruction is a way of querying both the CPU identity - * (manufacturer, model, etc) and its features. It was introduced before the - * Pentium in 1993 and keeps getting extended by both Intel, AMD and others. - * As you might imagine, after a decade and a half this treatment, it is now a - * giant ball of hair. Its entry in the current Intel manual runs to 28 pages. - * - * This instruction even it has its own Wikipedia entry. The Wikipedia entry - * has been translated into 6 languages. I am not making this up! - * - * We could get funky here and identify ourselves as "GenuineLguest", but - * instead we just use the real "cpuid" instruction. Then I pretty much turned - * off feature bits until the Guest booted. (Don't say that: you'll damage - * lguest sales!) Shut up, inner voice! (Hey, just pointing out that this is - * hardly future proof.) No one's listening! They don't like you anyway, - * parenthetic weirdo! - * - * Replacing the cpuid so we can turn features off is great for the kernel, but - * anyone (including userspace) can just use the raw "cpuid" instruction and - * the Host won't even notice since it isn't privileged. So we try not to get - * too worked up about it. - */ -static void lguest_cpuid(unsigned int *ax, unsigned int *bx, - unsigned int *cx, unsigned int *dx) -{ - int function = *ax; - - native_cpuid(ax, bx, cx, dx); - switch (function) { - /* - * CPUID 0 gives the highest legal CPUID number (and the ID string). - * We futureproof our code a little by sticking to known CPUID values. - */ - case 0: - if (*ax > 5) - *ax = 5; - break; - - /* - * CPUID 1 is a basic feature request. - * - * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3 - * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE. - */ - case 1: - *cx &= 0x00002201; - *dx &= 0x07808151; - /* - * The Host can do a nice optimization if it knows that the - * kernel mappings (addresses above 0xC0000000 or whatever - * PAGE_OFFSET is set to) haven't changed. But Linux calls - * flush_tlb_user() for both user and kernel mappings unless - * the Page Global Enable (PGE) feature bit is set. - */ - *dx |= 0x00002000; - /* - * We also lie, and say we're family id 5. 6 or greater - * leads to a rdmsr in early_init_intel which we can't handle. - * Family ID is returned as bits 8-12 in ax. - */ - *ax &= 0xFFFFF0FF; - *ax |= 0x00000500; - break; - - /* - * This is used to detect if we're running under KVM. We might be, - * but that's a Host matter, not us. So say we're not. - */ - case KVM_CPUID_SIGNATURE: - *bx = *cx = *dx = 0; - break; - - /* - * 0x80000000 returns the highest Extended Function, so we futureproof - * like we do above by limiting it to known fields. - */ - case 0x80000000: - if (*ax > 0x80000008) - *ax = 0x80000008; - break; - - /* - * PAE systems can mark pages as non-executable. Linux calls this the - * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced - * Virus Protection). We just switch it off here, since we don't - * support it. - */ - case 0x80000001: - *dx &= ~(1 << 20); - break; - } -} - -/* - * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4. - * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother - * it. The Host needs to know when the Guest wants to change them, so we have - * a whole series of functions like read_cr0() and write_cr0(). - * - * We start with cr0. cr0 allows you to turn on and off all kinds of basic - * features, but the only cr0 bit that Linux ever used at runtime was the - * horrifically-named Task Switched (TS) bit at bit 3 (ie. 8) - * - * What does the TS bit do? Well, it causes the CPU to trap (interrupt 7) if - * the floating point unit is used. Which allows us to restore FPU state - * lazily after a task switch if we wanted to, but wouldn't a name like - * "FPUTRAP bit" be a little less cryptic? - * - * Fortunately, Linux keeps it simple and doesn't use TS, so we can ignore - * cr0. - */ -static void lguest_write_cr0(unsigned long val) -{ -} - -static unsigned long lguest_read_cr0(void) -{ - return 0; -} - -/* - * cr2 is the virtual address of the last page fault, which the Guest only ever - * reads. The Host kindly writes this into our "struct lguest_data", so we - * just read it out of there. - */ -static unsigned long lguest_read_cr2(void) -{ - return lguest_data.cr2; -} - -/* See lguest_set_pte() below. */ -static bool cr3_changed = false; -static unsigned long current_cr3; - -/* - * cr3 is the current toplevel pagetable page: the principle is the same as - * cr0. Keep a local copy, and tell the Host when it changes. - */ -static void lguest_write_cr3(unsigned long cr3) -{ - lazy_hcall1(LHCALL_NEW_PGTABLE, cr3); - current_cr3 = cr3; - - /* These two page tables are simple, linear, and used during boot */ - if (cr3 != __pa_symbol(swapper_pg_dir) && - cr3 != __pa_symbol(initial_page_table)) - cr3_changed = true; -} - -static unsigned long lguest_read_cr3(void) -{ - return current_cr3; -} - -/* cr4 is used to enable and disable PGE, but we don't care. */ -static unsigned long lguest_read_cr4(void) -{ - return 0; -} - -static void lguest_write_cr4(unsigned long val) -{ -} - -/* - * Page Table Handling. - * - * Now would be a good time to take a rest and grab a coffee or similarly - * relaxing stimulant. The easy parts are behind us, and the trek gradually - * winds uphill from here. - * - * Quick refresher: memory is divided into "pages" of 4096 bytes each. The CPU - * maps virtual addresses to physical addresses using "page tables". We could - * use one huge index of 1 million entries: each address is 4 bytes, so that's - * 1024 pages just to hold the page tables. But since most virtual addresses - * are unused, we use a two level index which saves space. The cr3 register - * contains the physical address of the top level "page directory" page, which - * contains physical addresses of up to 1024 second-level pages. Each of these - * second level pages contains up to 1024 physical addresses of actual pages, - * or Page Table Entries (PTEs). - * - * Here's a diagram, where arrows indicate physical addresses: - * - * cr3 ---> +---------+ - * | --------->+---------+ - * | | | PADDR1 | - * Mid-level | | PADDR2 | - * (PMD) page | | | - * | | Lower-level | - * | | (PTE) page | - * | | | | - * .... .... - * - * So to convert a virtual address to a physical address, we look up the top - * level, which points us to the second level, which gives us the physical - * address of that page. If the top level entry was not present, or the second - * level entry was not present, then the virtual address is invalid (we - * say "the page was not mapped"). - * - * Put another way, a 32-bit virtual address is divided up like so: - * - * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - * |<---- 10 bits ---->|<---- 10 bits ---->|<------ 12 bits ------>| - * Index into top Index into second Offset within page - * page directory page pagetable page - * - * Now, unfortunately, this isn't the whole story: Intel added Physical Address - * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits). - * These are held in 64-bit page table entries, so we can now only fit 512 - * entries in a page, and the neat three-level tree breaks down. - * - * The result is a four level page table: - * - * cr3 --> [ 4 Upper ] - * [ Level ] - * [ Entries ] - * [(PUD Page)]---> +---------+ - * | --------->+---------+ - * | | | PADDR1 | - * Mid-level | | PADDR2 | - * (PMD) page | | | - * | | Lower-level | - * | | (PTE) page | - * | | | | - * .... .... - * - * - * And the virtual address is decoded as: - * - * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>| - * Index into Index into mid Index into lower Offset within page - * top entries directory page pagetable page - * - * It's too hard to switch between these two formats at runtime, so Linux only - * supports one or the other depending on whether CONFIG_X86_PAE is set. Many - * distributions turn it on, and not just for people with silly amounts of - * memory: the larger PTE entries allow room for the NX bit, which lets the - * kernel disable execution of pages and increase security. - * - * This was a problem for lguest, which couldn't run on these distributions; - * then Matias Zabaljauregui figured it all out and implemented it, and only a - * handful of puppies were crushed in the process! - * - * Back to our point: the kernel spends a lot of time changing both the - * top-level page directory and lower-level pagetable pages. The Guest doesn't - * know physical addresses, so while it maintains these page tables exactly - * like normal, it also needs to keep the Host informed whenever it makes a - * change: the Host will create the real page tables based on the Guests'. - */ - -/* - * The Guest calls this after it has set a second-level entry (pte), ie. to map - * a page into a process' address space. We tell the Host the toplevel and - * address this corresponds to. The Guest uses one pagetable per process, so - * we need to tell the Host which one we're changing (mm->pgd). - */ -static void lguest_pte_update(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ -#ifdef CONFIG_X86_PAE - /* PAE needs to hand a 64 bit page table entry, so it uses two args. */ - lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr, - ptep->pte_low, ptep->pte_high); -#else - lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low); -#endif -} - -/* This is the "set and update" combo-meal-deal version. */ -static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval) -{ - native_set_pte(ptep, pteval); - lguest_pte_update(mm, addr, ptep); -} - -/* - * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd - * to set a middle-level entry when PAE is activated. - * - * Again, we set the entry then tell the Host which page we changed, - * and the index of the entry we changed. - */ -#ifdef CONFIG_X86_PAE -static void lguest_set_pud(pud_t *pudp, pud_t pudval) -{ - native_set_pud(pudp, pudval); - - /* 32 bytes aligned pdpt address and the index. */ - lazy_hcall2(LHCALL_SET_PGD, __pa(pudp) & 0xFFFFFFE0, - (__pa(pudp) & 0x1F) / sizeof(pud_t)); -} - -static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) -{ - native_set_pmd(pmdp, pmdval); - lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK, - (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t)); -} -#else - -/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */ -static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) -{ - native_set_pmd(pmdp, pmdval); - lazy_hcall2(LHCALL_SET_PGD, __pa(pmdp) & PAGE_MASK, - (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t)); -} -#endif - -/* - * There are a couple of legacy places where the kernel sets a PTE, but we - * don't know the top level any more. This is useless for us, since we don't - * know which pagetable is changing or what address, so we just tell the Host - * to forget all of them. Fortunately, this is very rare. - * - * ... except in early boot when the kernel sets up the initial pagetables, - * which makes booting astonishingly slow: 48 seconds! So we don't even tell - * the Host anything changed until we've done the first real page table switch, - * which brings boot back to 4.3 seconds. - */ -static void lguest_set_pte(pte_t *ptep, pte_t pteval) -{ - native_set_pte(ptep, pteval); - if (cr3_changed) - lazy_hcall1(LHCALL_FLUSH_TLB, 1); -} - -#ifdef CONFIG_X86_PAE -/* - * With 64-bit PTE values, we need to be careful setting them: if we set 32 - * bits at a time, the hardware could see a weird half-set entry. These - * versions ensure we update all 64 bits at once. - */ -static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte) -{ - native_set_pte_atomic(ptep, pte); - if (cr3_changed) - lazy_hcall1(LHCALL_FLUSH_TLB, 1); -} - -static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - native_pte_clear(mm, addr, ptep); - lguest_pte_update(mm, addr, ptep); -} - -static void lguest_pmd_clear(pmd_t *pmdp) -{ - lguest_set_pmd(pmdp, __pmd(0)); -} -#endif - -/* - * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on - * native page table operations. On native hardware you can set a new page - * table entry whenever you want, but if you want to remove one you have to do - * a TLB flush (a TLB is a little cache of page table entries kept by the CPU). - * - * So the lguest_set_pte_at() and lguest_set_pmd() functions above are only - * called when a valid entry is written, not when it's removed (ie. marked not - * present). Instead, this is where we come when the Guest wants to remove a - * page table entry: we tell the Host to set that entry to 0 (ie. the present - * bit is zero). - */ -static void lguest_flush_tlb_single(unsigned long addr) -{ - /* Simply set it to zero: if it was not, it will fault back in. */ - lazy_hcall3(LHCALL_SET_PTE, current_cr3, addr, 0); -} - -/* - * This is what happens after the Guest has removed a large number of entries. - * This tells the Host that any of the page table entries for userspace might - * have changed, ie. virtual addresses below PAGE_OFFSET. - */ -static void lguest_flush_tlb_user(void) -{ - lazy_hcall1(LHCALL_FLUSH_TLB, 0); -} - -/* - * This is called when the kernel page tables have changed. That's not very - * common (unless the Guest is using highmem, which makes the Guest extremely - * slow), so it's worth separating this from the user flushing above. - */ -static void lguest_flush_tlb_kernel(void) -{ - lazy_hcall1(LHCALL_FLUSH_TLB, 1); -} - -/* - * The Unadvanced Programmable Interrupt Controller. - * - * This is an attempt to implement the simplest possible interrupt controller. - * I spent some time looking though routines like set_irq_chip_and_handler, - * set_irq_chip_and_handler_name, set_irq_chip_data and set_phasers_to_stun and - * I *think* this is as simple as it gets. - * - * We can tell the Host what interrupts we want blocked ready for using the - * lguest_data.interrupts bitmap, so disabling (aka "masking") them is as - * simple as setting a bit. We don't actually "ack" interrupts as such, we - * just mask and unmask them. I wonder if we should be cleverer? - */ -static void disable_lguest_irq(struct irq_data *data) -{ - set_bit(data->irq, lguest_data.blocked_interrupts); -} - -static void enable_lguest_irq(struct irq_data *data) -{ - clear_bit(data->irq, lguest_data.blocked_interrupts); -} - -/* This structure describes the lguest IRQ controller. */ -static struct irq_chip lguest_irq_controller = { - .name = "lguest", - .irq_mask = disable_lguest_irq, - .irq_mask_ack = disable_lguest_irq, - .irq_unmask = enable_lguest_irq, -}; - -/* - * Interrupt descriptors are allocated as-needed, but low-numbered ones are - * reserved by the generic x86 code. So we ignore irq_alloc_desc_at if it - * tells us the irq is already used: other errors (ie. ENOMEM) we take - * seriously. - */ -static int lguest_setup_irq(unsigned int irq) -{ - struct irq_desc *desc; - int err; - - /* Returns -ve error or vector number. */ - err = irq_alloc_desc_at(irq, 0); - if (err < 0 && err != -EEXIST) - return err; - - /* - * Tell the Linux infrastructure that the interrupt is - * controlled by our level-based lguest interrupt controller. - */ - irq_set_chip_and_handler_name(irq, &lguest_irq_controller, - handle_level_irq, "level"); - - /* Some systems map "vectors" to interrupts weirdly. Not us! */ - desc = irq_to_desc(irq); - __this_cpu_write(vector_irq[FIRST_EXTERNAL_VECTOR + irq], desc); - return 0; -} - -static int lguest_enable_irq(struct pci_dev *dev) -{ - int err; - u8 line = 0; - - /* We literally use the PCI interrupt line as the irq number. */ - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line); - err = lguest_setup_irq(line); - if (!err) - dev->irq = line; - return err; -} - -/* We don't do hotplug PCI, so this shouldn't be called. */ -static void lguest_disable_irq(struct pci_dev *dev) -{ - WARN_ON(1); -} - -/* - * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware - * interrupt (except 128, which is used for system calls). - */ -static void __init lguest_init_IRQ(void) -{ - unsigned int i; - - for (i = FIRST_EXTERNAL_VECTOR; i < FIRST_SYSTEM_VECTOR; i++) { - if (i != IA32_SYSCALL_VECTOR) - set_intr_gate(i, irq_entries_start + - 8 * (i - FIRST_EXTERNAL_VECTOR)); - } - - /* - * This call is required to set up for 4k stacks, where we have - * separate stacks for hard and soft interrupts. - */ - irq_ctx_init(smp_processor_id()); -} - -/* - * Time. - * - * It would be far better for everyone if the Guest had its own clock, but - * until then the Host gives us the time on every interrupt. - */ -static void lguest_get_wallclock(struct timespec *now) -{ - *now = lguest_data.time; -} - -/* - * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us - * what speed it runs at, or 0 if it's unusable as a reliable clock source. - * This matches what we want here: if we return 0 from this function, the x86 - * TSC clock will give up and not register itself. - */ -static unsigned long lguest_tsc_khz(void) -{ - return lguest_data.tsc_khz; -} - -/* - * If we can't use the TSC, the kernel falls back to our lower-priority - * "lguest_clock", where we read the time value given to us by the Host. - */ -static u64 lguest_clock_read(struct clocksource *cs) -{ - unsigned long sec, nsec; - - /* - * Since the time is in two parts (seconds and nanoseconds), we risk - * reading it just as it's changing from 99 & 0.999999999 to 100 and 0, - * and getting 99 and 0. As Linux tends to come apart under the stress - * of time travel, we must be careful: - */ - do { - /* First we read the seconds part. */ - sec = lguest_data.time.tv_sec; - /* - * This read memory barrier tells the compiler and the CPU that - * this can't be reordered: we have to complete the above - * before going on. - */ - rmb(); - /* Now we read the nanoseconds part. */ - nsec = lguest_data.time.tv_nsec; - /* Make sure we've done that. */ - rmb(); - /* Now if the seconds part has changed, try again. */ - } while (unlikely(lguest_data.time.tv_sec != sec)); - - /* Our lguest clock is in real nanoseconds. */ - return sec*1000000000ULL + nsec; -} - -/* This is the fallback clocksource: lower priority than the TSC clocksource. */ -static struct clocksource lguest_clock = { - .name = "lguest", - .rating = 200, - .read = lguest_clock_read, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * We also need a "struct clock_event_device": Linux asks us to set it to go - * off some time in the future. Actually, James Morris figured all this out, I - * just applied the patch. - */ -static int lguest_clockevent_set_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - /* FIXME: I don't think this can ever happen, but James tells me he had - * to put this code in. Maybe we should remove it now. Anyone? */ - if (delta < LG_CLOCK_MIN_DELTA) { - if (printk_ratelimit()) - printk(KERN_DEBUG "%s: small delta %lu ns\n", - __func__, delta); - return -ETIME; - } - - /* Please wake us this far in the future. */ - hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0, 0); - return 0; -} - -static int lguest_clockevent_shutdown(struct clock_event_device *evt) -{ - /* A 0 argument shuts the clock down. */ - hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0); - return 0; -} - -/* This describes our primitive timer chip. */ -static struct clock_event_device lguest_clockevent = { - .name = "lguest", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = lguest_clockevent_set_next_event, - .set_state_shutdown = lguest_clockevent_shutdown, - .rating = INT_MAX, - .mult = 1, - .shift = 0, - .min_delta_ns = LG_CLOCK_MIN_DELTA, - .min_delta_ticks = LG_CLOCK_MIN_DELTA, - .max_delta_ns = LG_CLOCK_MAX_DELTA, - .max_delta_ticks = LG_CLOCK_MAX_DELTA, -}; - -/* - * This is the Guest timer interrupt handler (hardware interrupt 0). We just - * call the clockevent infrastructure and it does whatever needs doing. - */ -static void lguest_time_irq(struct irq_desc *desc) -{ - unsigned long flags; - - /* Don't interrupt us while this is running. */ - local_irq_save(flags); - lguest_clockevent.event_handler(&lguest_clockevent); - local_irq_restore(flags); -} - -/* - * At some point in the boot process, we get asked to set up our timing - * infrastructure. The kernel doesn't expect timer interrupts before this, but - * we cleverly initialized the "blocked_interrupts" field of "struct - * lguest_data" so that timer interrupts were blocked until now. - */ -static void lguest_time_init(void) -{ - /* Set up the timer interrupt (0) to go to our simple timer routine */ - if (lguest_setup_irq(0) != 0) - panic("Could not set up timer irq"); - irq_set_handler(0, lguest_time_irq); - - clocksource_register_hz(&lguest_clock, NSEC_PER_SEC); - - /* We can't set cpumask in the initializer: damn C limitations! Set it - * here and register our timer device. */ - lguest_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&lguest_clockevent); - - /* Finally, we unblock the timer interrupt. */ - clear_bit(0, lguest_data.blocked_interrupts); -} - -/* - * Miscellaneous bits and pieces. - * - * Here is an oddball collection of functions which the Guest needs for things - * to work. They're pretty simple. - */ - -/* - * The Guest needs to tell the Host what stack it expects traps to use. For - * native hardware, this is part of the Task State Segment mentioned above in - * lguest_load_tr_desc(), but to help hypervisors there's this special call. - * - * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data - * segment), the privilege level (we're privilege level 1, the Host is 0 and - * will not tolerate us trying to use that), the stack pointer, and the number - * of pages in the stack. - */ -static void lguest_load_sp0(struct tss_struct *tss, - struct thread_struct *thread) -{ - lazy_hcall3(LHCALL_SET_STACK, __KERNEL_DS | 0x1, thread->sp0, - THREAD_SIZE / PAGE_SIZE); - tss->x86_tss.sp0 = thread->sp0; -} - -/* Let's just say, I wouldn't do debugging under a Guest. */ -static unsigned long lguest_get_debugreg(int regno) -{ - /* FIXME: Implement */ - return 0; -} - -static void lguest_set_debugreg(int regno, unsigned long value) -{ - /* FIXME: Implement */ -} - -/* - * There are times when the kernel wants to make sure that no memory writes are - * caught in the cache (that they've all reached real hardware devices). This - * doesn't matter for the Guest which has virtual hardware. - * - * On the Pentium 4 and above, cpuid() indicates that the Cache Line Flush - * (clflush) instruction is available and the kernel uses that. Otherwise, it - * uses the older "Write Back and Invalidate Cache" (wbinvd) instruction. - * Unlike clflush, wbinvd can only be run at privilege level 0. So we can - * ignore clflush, but replace wbinvd. - */ -static void lguest_wbinvd(void) -{ -} - -/* - * If the Guest expects to have an Advanced Programmable Interrupt Controller, - * we play dumb by ignoring writes and returning 0 for reads. So it's no - * longer Programmable nor Controlling anything, and I don't think 8 lines of - * code qualifies for Advanced. It will also never interrupt anything. It - * does, however, allow us to get through the Linux boot code. - */ -#ifdef CONFIG_X86_LOCAL_APIC -static void lguest_apic_write(u32 reg, u32 v) -{ -} - -static u32 lguest_apic_read(u32 reg) -{ - return 0; -} - -static u64 lguest_apic_icr_read(void) -{ - return 0; -} - -static void lguest_apic_icr_write(u32 low, u32 id) -{ - /* Warn to see if there's any stray references */ - WARN_ON(1); -} - -static void lguest_apic_wait_icr_idle(void) -{ - return; -} - -static u32 lguest_apic_safe_wait_icr_idle(void) -{ - return 0; -} - -static void set_lguest_basic_apic_ops(void) -{ - apic->read = lguest_apic_read; - apic->write = lguest_apic_write; - apic->icr_read = lguest_apic_icr_read; - apic->icr_write = lguest_apic_icr_write; - apic->wait_icr_idle = lguest_apic_wait_icr_idle; - apic->safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle; -}; -#endif - -/* STOP! Until an interrupt comes in. */ -static void lguest_safe_halt(void) -{ - hcall(LHCALL_HALT, 0, 0, 0, 0); -} - -/* - * The SHUTDOWN hypercall takes a string to describe what's happening, and - * an argument which says whether this to restart (reboot) the Guest or not. - * - * Note that the Host always prefers that the Guest speak in physical addresses - * rather than virtual addresses, so we use __pa() here. - */ -static void lguest_power_off(void) -{ - hcall(LHCALL_SHUTDOWN, __pa("Power down"), - LGUEST_SHUTDOWN_POWEROFF, 0, 0); -} - -/* - * Panicing. - * - * Don't. But if you did, this is what happens. - */ -static int lguest_panic(struct notifier_block *nb, unsigned long l, void *p) -{ - hcall(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF, 0, 0); - /* The hcall won't return, but to keep gcc happy, we're "done". */ - return NOTIFY_DONE; -} - -static struct notifier_block paniced = { - .notifier_call = lguest_panic -}; - -/* Setting up memory is fairly easy. */ -static __init char *lguest_memory_setup(void) -{ - /* - * The Linux bootloader header contains an "e820" memory map: the - * Launcher populated the first entry with our memory limit. - */ - e820__range_add(boot_params.e820_table[0].addr, - boot_params.e820_table[0].size, - boot_params.e820_table[0].type); - - /* This string is for the boot messages. */ - return "LGUEST"; -} - -/* Offset within PCI config space of BAR access capability. */ -static int console_cfg_offset = 0; -static int console_access_cap; - -/* Set up so that we access off in bar0 (on bus 0, device 1, function 0) */ -static void set_cfg_window(u32 cfg_offset, u32 off) -{ - write_pci_config_byte(0, 1, 0, - cfg_offset + offsetof(struct virtio_pci_cap, bar), - 0); - write_pci_config(0, 1, 0, - cfg_offset + offsetof(struct virtio_pci_cap, length), - 4); - write_pci_config(0, 1, 0, - cfg_offset + offsetof(struct virtio_pci_cap, offset), - off); -} - -static void write_bar_via_cfg(u32 cfg_offset, u32 off, u32 val) -{ - /* - * We could set this up once, then leave it; nothing else in the * - * kernel should touch these registers. But if it went wrong, that - * would be a horrible bug to find. - */ - set_cfg_window(cfg_offset, off); - write_pci_config(0, 1, 0, - cfg_offset + sizeof(struct virtio_pci_cap), val); -} - -static void probe_pci_console(void) -{ - u8 cap, common_cap = 0, device_cap = 0; - u32 device_len; - - /* Avoid recursive printk into here. */ - console_cfg_offset = -1; - - if (!early_pci_allowed()) { - printk(KERN_ERR "lguest: early PCI access not allowed!\n"); - return; - } - - /* We expect a console PCI device at BUS0, slot 1. */ - if (read_pci_config(0, 1, 0, 0) != 0x10431AF4) { - printk(KERN_ERR "lguest: PCI device is %#x!\n", - read_pci_config(0, 1, 0, 0)); - return; - } - - /* Find the capabilities we need (must be in bar0) */ - cap = read_pci_config_byte(0, 1, 0, PCI_CAPABILITY_LIST); - while (cap) { - u8 vndr = read_pci_config_byte(0, 1, 0, cap); - if (vndr == PCI_CAP_ID_VNDR) { - u8 type, bar; - - type = read_pci_config_byte(0, 1, 0, - cap + offsetof(struct virtio_pci_cap, cfg_type)); - bar = read_pci_config_byte(0, 1, 0, - cap + offsetof(struct virtio_pci_cap, bar)); - - switch (type) { - case VIRTIO_PCI_CAP_DEVICE_CFG: - if (bar == 0) - device_cap = cap; - break; - case VIRTIO_PCI_CAP_PCI_CFG: - console_access_cap = cap; - break; - } - } - cap = read_pci_config_byte(0, 1, 0, cap + PCI_CAP_LIST_NEXT); - } - if (!device_cap || !console_access_cap) { - printk(KERN_ERR "lguest: No caps (%u/%u/%u) in console!\n", - common_cap, device_cap, console_access_cap); - return; - } - - /* - * Note that we can't check features, until we've set the DRIVER - * status bit. We don't want to do that until we have a real driver, - * so we just check that the device-specific config has room for - * emerg_wr. If it doesn't support VIRTIO_CONSOLE_F_EMERG_WRITE - * it should ignore the access. - */ - device_len = read_pci_config(0, 1, 0, - device_cap + offsetof(struct virtio_pci_cap, length)); - if (device_len < (offsetof(struct virtio_console_config, emerg_wr) - + sizeof(u32))) { - printk(KERN_ERR "lguest: console missing emerg_wr field\n"); - return; - } - - console_cfg_offset = read_pci_config(0, 1, 0, - device_cap + offsetof(struct virtio_pci_cap, offset)); - printk(KERN_INFO "lguest: Console via virtio-pci emerg_wr\n"); -} - -/* - * We will eventually use the virtio console device to produce console output, - * but before that is set up we use the virtio PCI console's backdoor mmio - * access and the "emergency" write facility (which is legal even before the - * device is configured). - */ -static __init int early_put_chars(u32 vtermno, const char *buf, int count) -{ - /* If we couldn't find PCI console, forget it. */ - if (console_cfg_offset < 0) - return count; - - if (unlikely(!console_cfg_offset)) { - probe_pci_console(); - if (console_cfg_offset < 0) - return count; - } - - write_bar_via_cfg(console_access_cap, - console_cfg_offset - + offsetof(struct virtio_console_config, emerg_wr), - buf[0]); - return 1; -} - -/* - * Rebooting also tells the Host we're finished, but the RESTART flag tells the - * Launcher to reboot us. - */ -static void lguest_restart(char *reason) -{ - hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0, 0); -} - -/*G:050 - * Patching (Powerfully Placating Performance Pedants) - * - * We have already seen that pv_ops structures let us replace simple native - * instructions with calls to the appropriate back end all throughout the - * kernel. This allows the same kernel to run as a Guest and as a native - * kernel, but it's slow because of all the indirect branches. - * - * Remember that David Wheeler quote about "Any problem in computer science can - * be solved with another layer of indirection"? The rest of that quote is - * "... But that usually will create another problem." This is the first of - * those problems. - * - * Our current solution is to allow the paravirt back end to optionally patch - * over the indirect calls to replace them with something more efficient. We - * patch two of the simplest of the most commonly called functions: disable - * interrupts and save interrupts. We usually have 6 or 10 bytes to patch - * into: the Guest versions of these operations are small enough that we can - * fit comfortably. - * - * First we need assembly templates of each of the patchable Guest operations, - * and these are in head_32.S. - */ - -/*G:060 We construct a table from the assembler templates: */ -static const struct lguest_insns -{ - const char *start, *end; -} lguest_insns[] = { - [PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli }, - [PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf }, -}; - -/* - * Now our patch routine is fairly simple (based on the native one in - * paravirt.c). If we have a replacement, we copy it in and return how much of - * the available space we used. - */ -static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf, - unsigned long addr, unsigned len) -{ - unsigned int insn_len; - - /* Don't do anything special if we don't have a replacement */ - if (type >= ARRAY_SIZE(lguest_insns) || !lguest_insns[type].start) - return paravirt_patch_default(type, clobber, ibuf, addr, len); - - insn_len = lguest_insns[type].end - lguest_insns[type].start; - - /* Similarly if it can't fit (doesn't happen, but let's be thorough). */ - if (len < insn_len) - return paravirt_patch_default(type, clobber, ibuf, addr, len); - - /* Copy in our instructions. */ - memcpy(ibuf, lguest_insns[type].start, insn_len); - return insn_len; -} - -/*G:029 - * Once we get to lguest_init(), we know we're a Guest. The various - * pv_ops structures in the kernel provide points for (almost) every routine we - * have to override to avoid privileged instructions. - */ -__init void lguest_init(void) -{ - /* We're under lguest. */ - pv_info.name = "lguest"; - /* We're running at privilege level 1, not 0 as normal. */ - pv_info.kernel_rpl = 1; - /* Everyone except Xen runs with this set. */ - pv_info.shared_kernel_pmd = 1; - - /* - * We set up all the lguest overrides for sensitive operations. These - * are detailed with the operations themselves. - */ - - /* Interrupt-related operations */ - pv_irq_ops.save_fl = PV_CALLEE_SAVE(lguest_save_fl); - pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl); - pv_irq_ops.irq_disable = PV_CALLEE_SAVE(lguest_irq_disable); - pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable); - pv_irq_ops.safe_halt = lguest_safe_halt; - - /* Setup operations */ - pv_init_ops.patch = lguest_patch; - - /* Intercepts of various CPU instructions */ - pv_cpu_ops.load_gdt = lguest_load_gdt; - pv_cpu_ops.cpuid = lguest_cpuid; - pv_cpu_ops.load_idt = lguest_load_idt; - pv_cpu_ops.iret = lguest_iret; - pv_cpu_ops.load_sp0 = lguest_load_sp0; - pv_cpu_ops.load_tr_desc = lguest_load_tr_desc; - pv_cpu_ops.set_ldt = lguest_set_ldt; - pv_cpu_ops.load_tls = lguest_load_tls; - pv_cpu_ops.get_debugreg = lguest_get_debugreg; - pv_cpu_ops.set_debugreg = lguest_set_debugreg; - pv_cpu_ops.read_cr0 = lguest_read_cr0; - pv_cpu_ops.write_cr0 = lguest_write_cr0; - pv_cpu_ops.read_cr4 = lguest_read_cr4; - pv_cpu_ops.write_cr4 = lguest_write_cr4; - pv_cpu_ops.write_gdt_entry = lguest_write_gdt_entry; - pv_cpu_ops.write_idt_entry = lguest_write_idt_entry; - pv_cpu_ops.wbinvd = lguest_wbinvd; - pv_cpu_ops.start_context_switch = paravirt_start_context_switch; - pv_cpu_ops.end_context_switch = lguest_end_context_switch; - - /* Pagetable management */ - pv_mmu_ops.write_cr3 = lguest_write_cr3; - pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user; - pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single; - pv_mmu_ops.flush_tlb_kernel = lguest_flush_tlb_kernel; - pv_mmu_ops.set_pte = lguest_set_pte; - pv_mmu_ops.set_pte_at = lguest_set_pte_at; - pv_mmu_ops.set_pmd = lguest_set_pmd; -#ifdef CONFIG_X86_PAE - pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic; - pv_mmu_ops.pte_clear = lguest_pte_clear; - pv_mmu_ops.pmd_clear = lguest_pmd_clear; - pv_mmu_ops.set_pud = lguest_set_pud; -#endif - pv_mmu_ops.read_cr2 = lguest_read_cr2; - pv_mmu_ops.read_cr3 = lguest_read_cr3; - pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu; - pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode; - pv_mmu_ops.lazy_mode.flush = paravirt_flush_lazy_mmu; - pv_mmu_ops.pte_update = lguest_pte_update; - -#ifdef CONFIG_X86_LOCAL_APIC - /* APIC read/write intercepts */ - set_lguest_basic_apic_ops(); -#endif - - x86_init.resources.memory_setup = lguest_memory_setup; - x86_init.irqs.intr_init = lguest_init_IRQ; - x86_init.timers.timer_init = lguest_time_init; - x86_platform.calibrate_tsc = lguest_tsc_khz; - x86_platform.get_wallclock = lguest_get_wallclock; - - /* - * Now is a good time to look at the implementations of these functions - * before returning to the rest of lguest_init(). - */ - - /*G:070 - * Now we've seen all the paravirt_ops, we return to - * lguest_init() where the rest of the fairly chaotic boot setup - * occurs. - */ - - /* - * The stack protector is a weird thing where gcc places a canary - * value on the stack and then checks it on return. This file is - * compiled with -fno-stack-protector it, so we got this far without - * problems. The value of the canary is kept at offset 20 from the - * %gs register, so we need to set that up before calling C functions - * in other files. - */ - setup_stack_canary_segment(0); - - /* - * We could just call load_stack_canary_segment(), but we might as well - * call switch_to_new_gdt() which loads the whole table and sets up the - * per-cpu segment descriptor register %fs as well. - */ - switch_to_new_gdt(0); - - /* - * The Host<->Guest Switcher lives at the top of our address space, and - * the Host told us how big it is when we made LGUEST_INIT hypercall: - * it put the answer in lguest_data.reserve_mem - */ - reserve_top_address(lguest_data.reserve_mem); - - /* Hook in our special panic hypercall code. */ - atomic_notifier_chain_register(&panic_notifier_list, &paniced); - - /* - * This is messy CPU setup stuff which the native boot code does before - * start_kernel, so we have to do, too: - */ - cpu_detect(&new_cpu_data); - /* head.S usually sets up the first capability word, so do it here. */ - new_cpu_data.x86_capability[CPUID_1_EDX] = cpuid_edx(1); - - /* Math is always hard! */ - set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU); - - /* We don't have features. We have puppies! Puppies! */ -#ifdef CONFIG_X86_MCE - mca_cfg.disabled = true; -#endif -#ifdef CONFIG_ACPI - acpi_disabled = 1; -#endif - - /* - * We set the preferred console to "hvc". This is the "hypervisor - * virtual console" driver written by the PowerPC people, which we also - * adapted for lguest's use. - */ - add_preferred_console("hvc", 0, NULL); - - /* Register our very early console. */ - virtio_cons_early_init(early_put_chars); - - /* Don't let ACPI try to control our PCI interrupts. */ - disable_acpi(); - - /* We control them ourselves, by overriding these two hooks. */ - pcibios_enable_irq = lguest_enable_irq; - pcibios_disable_irq = lguest_disable_irq; - - /* - * Last of all, we set the power management poweroff hook to point to - * the Guest routine to power off, and the reboot hook to our restart - * routine. - */ - pm_power_off = lguest_power_off; - machine_ops.restart = lguest_restart; - - /* - * Now we're set up, call i386_start_kernel() in head32.c and we proceed - * to boot as normal. It never returns. - */ - i386_start_kernel(); -} -/* - * This marks the end of stage II of our journey, The Guest. - * - * It is now time for us to explore the layer of virtual drivers and complete - * our understanding of the Guest in "make Drivers". - */ |