diff options
Diffstat (limited to 'arch/mips/include/asm/io.h')
| -rw-r--r-- | arch/mips/include/asm/io.h | 129 |
1 files changed, 64 insertions, 65 deletions
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 54c730aed327..266257d56fb6 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -20,6 +20,7 @@ #include <linux/irqflags.h> #include <asm/addrspace.h> +#include <asm/barrier.h> #include <asm/bug.h> #include <asm/byteorder.h> #include <asm/cpu.h> @@ -34,11 +35,6 @@ #include <mangle-port.h> /* - * Slowdown I/O port space accesses for antique hardware. - */ -#undef CONF_SLOWDOWN_IO - -/* * Raw operations are never swapped in software. OTOH values that raw * operations are working on may or may not have been swapped by the bus * hardware. An example use would be for flash memory that's used for @@ -50,6 +46,11 @@ # define __raw_ioswabq(a, x) (x) # define ____raw_ioswabq(a, x) (x) +# define __relaxed_ioswabb ioswabb +# define __relaxed_ioswabw ioswabw +# define __relaxed_ioswabl ioswabl +# define __relaxed_ioswabq ioswabq + /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ #define IO_SPACE_LIMIT 0xffff @@ -80,31 +81,29 @@ static inline void set_io_port_base(unsigned long base) } /* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - * + * Provide the necessary definitions for generic iomap. We make use of + * mips_io_port_base for iomap(), but we don't reserve any low addresses for + * use with I/O ports. */ -#define __SLOW_DOWN_IO \ - __asm__ __volatile__( \ - "sb\t$0,0x80(%0)" \ - : : "r" (mips_io_port_base)); +#define HAVE_ARCH_PIO_SIZE +#define PIO_OFFSET mips_io_port_base +#define PIO_MASK IO_SPACE_LIMIT +#define PIO_RESERVED 0x0UL -#ifdef CONF_SLOWDOWN_IO -#ifdef REALLY_SLOW_IO -#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } -#else -#define SLOW_DOWN_IO __SLOW_DOWN_IO -#endif -#else -#define SLOW_DOWN_IO -#endif +/* + * Enforce in-order execution of data I/O. In the MIPS architecture + * these are equivalent to corresponding platform-specific memory + * barriers defined in <asm/barrier.h>. API pinched from PowerPC, + * with sync additionally defined. + */ +#define iobarrier_rw() mb() +#define iobarrier_r() rmb() +#define iobarrier_w() wmb() +#define iobarrier_sync() iob() + +/* Some callers use this older API instead. */ +#define mmiowb() iobarrier_w() /* * virt_to_phys - map virtual addresses to physical @@ -172,11 +171,6 @@ static inline void *isa_bus_to_virt(unsigned long address) extern void __iomem * __ioremap(phys_addr_t offset, phys_addr_t size, unsigned long flags); extern void __iounmap(const volatile void __iomem *addr); -#ifndef CONFIG_PCI -struct pci_dev; -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} -#endif - static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long size, unsigned long flags) { @@ -316,13 +310,13 @@ static inline void iounmap(const volatile void __iomem *addr) #undef __IS_KSEG1 } -#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_LOONGSON3_ENHANCEMENT) +#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON3) #define war_io_reorder_wmb() wmb() #else #define war_io_reorder_wmb() barrier() #endif -#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \ +#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, barrier, relax, irq) \ \ static inline void pfx##write##bwlq(type val, \ volatile void __iomem *mem) \ @@ -330,7 +324,10 @@ static inline void pfx##write##bwlq(type val, \ volatile type *__mem; \ type __val; \ \ - war_io_reorder_wmb(); \ + if (barrier) \ + iobarrier_rw(); \ + else \ + war_io_reorder_wmb(); \ \ __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ \ @@ -367,6 +364,9 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ \ __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ \ + if (barrier) \ + iobarrier_rw(); \ + \ if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ __val = *__mem; \ else if (cpu_has_64bits) { \ @@ -390,18 +390,22 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ } \ \ /* prevent prefetching of coherent DMA data prematurely */ \ - rmb(); \ + if (!relax) \ + rmb(); \ return pfx##ioswab##bwlq(__mem, __val); \ } -#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, barrier, relax, p) \ \ static inline void pfx##out##bwlq##p(type val, unsigned long port) \ { \ volatile type *__addr; \ type __val; \ \ - war_io_reorder_wmb(); \ + if (barrier) \ + iobarrier_rw(); \ + else \ + war_io_reorder_wmb(); \ \ __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ \ @@ -411,7 +415,6 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port) \ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ \ *__addr = __val; \ - slow; \ } \ \ static inline type pfx##in##bwlq##p(unsigned long port) \ @@ -423,23 +426,27 @@ static inline type pfx##in##bwlq##p(unsigned long port) \ \ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ \ + if (barrier) \ + iobarrier_rw(); \ + \ __val = *__addr; \ - slow; \ \ /* prevent prefetching of coherent DMA data prematurely */ \ - rmb(); \ + if (!relax) \ + rmb(); \ return pfx##ioswab##bwlq(__addr, __val); \ } -#define __BUILD_MEMORY_PFX(bus, bwlq, type) \ +#define __BUILD_MEMORY_PFX(bus, bwlq, type, relax) \ \ -__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1) +__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1, relax, 1) #define BUILDIO_MEM(bwlq, type) \ \ -__BUILD_MEMORY_PFX(__raw_, bwlq, type) \ -__BUILD_MEMORY_PFX(, bwlq, type) \ -__BUILD_MEMORY_PFX(__mem_, bwlq, type) \ +__BUILD_MEMORY_PFX(__raw_, bwlq, type, 0) \ +__BUILD_MEMORY_PFX(__relaxed_, bwlq, type, 1) \ +__BUILD_MEMORY_PFX(__mem_, bwlq, type, 0) \ +__BUILD_MEMORY_PFX(, bwlq, type, 0) BUILDIO_MEM(b, u8) BUILDIO_MEM(w, u16) @@ -447,8 +454,8 @@ BUILDIO_MEM(l, u32) BUILDIO_MEM(q, u64) #define __BUILD_IOPORT_PFX(bus, bwlq, type) \ - __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ - __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) + __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, 1, 0, _p) #define BUILDIO_IOPORT(bwlq, type) \ __BUILD_IOPORT_PFX(, bwlq, type) \ @@ -463,19 +470,19 @@ BUILDIO_IOPORT(q, u64) #define __BUILDIO(bwlq, type) \ \ -__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0) +__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 1, 0, 0) __BUILDIO(q, u64) -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl -#define readq_relaxed readq +#define readb_relaxed __relaxed_readb +#define readw_relaxed __relaxed_readw +#define readl_relaxed __relaxed_readl +#define readq_relaxed __relaxed_readq -#define writeb_relaxed writeb -#define writew_relaxed writew -#define writel_relaxed writel -#define writeq_relaxed writeq +#define writeb_relaxed __relaxed_writeb +#define writew_relaxed __relaxed_writew +#define writel_relaxed __relaxed_writel +#define writeq_relaxed __relaxed_writeq #define readb_be(addr) \ __raw_readb((__force unsigned *)(addr)) @@ -561,14 +568,6 @@ BUILDSTRING(l, u32) BUILDSTRING(q, u64) #endif - -#ifdef CONFIG_CPU_CAVIUM_OCTEON -#define mmiowb() wmb() -#else -/* Depends on MIPS II instruction set */ -#define mmiowb() asm volatile ("sync" ::: "memory") -#endif - static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) { memset((void __force *) addr, val, count); |