aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c218
1 files changed, 12 insertions, 206 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 507d8eeaab95..3f80929a5f7e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -133,60 +133,13 @@ static void omap3_save_secure_ram_context(void)
}
}
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
- u32 wkst, fclk, iclk, clken;
- u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
- u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
- u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
- u16 grpsel_off = (regs == 3) ?
- OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
- int c = 0;
-
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
- if (wkst) {
- iclk = omap2_cm_read_mod_reg(module, iclk_off);
- fclk = omap2_cm_read_mod_reg(module, fclk_off);
- while (wkst) {
- clken = wkst;
- omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
- /*
- * For USBHOST, we don't know whether HOST1 or
- * HOST2 woke us up, so enable both f-clocks
- */
- if (module == OMAP3430ES2_USBHOST_MOD)
- clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
- omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
- omap2_prm_write_mod_reg(wkst, module, wkst_off);
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
- c++;
- }
- omap2_cm_write_mod_reg(iclk, module, iclk_off);
- omap2_cm_write_mod_reg(fclk, module, fclk_off);
- }
-
- return c;
-}
-
static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ ~(OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK));
return c ? IRQ_HANDLED : IRQ_NONE;
}
@@ -200,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
- c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
}
return c ? IRQ_HANDLED : IRQ_NONE;
@@ -399,159 +353,11 @@ restore:
#define omap3_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- * retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle. This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
- /* ensure IVA2 clock is disabled */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* if no clock activity, nothing else to do */
- if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
- OMAP3430_CLKACTIVITY_IVA2_MASK))
- return;
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Enable IVA2 clock */
- omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
- OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Set IVA2 boot mode to 'idle' */
- omap3_ctrl_set_iva_bootmode_idle();
-
- /* Un-reset IVA2 */
- omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Disable IVA2 clock */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
-static void __init omap3_d2d_idle(void)
-{
- u16 mask, padconf;
-
- /* In a stand alone OMAP3430 where there is not a stacked
- * modem for the D2D Idle Ack and D2D MStandby must be pulled
- * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
- * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
- mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
-
- /* reset modem */
- omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
- OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
- CORE_MOD, OMAP2_RM_RSTCTRL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
-}
-
static void __init prcm_setup_regs(void)
{
- u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_EN_UART4_MASK : 0;
- u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_GRPSEL_UART4_MASK : 0;
-
- /* XXX This should be handled by hwmod code or SCM init code */
- omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
-
- /*
- * Enable control of expternal oscillator through
- * sys_clkreq. In the long run clock framework should
- * take care of this.
- */
- omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
- 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
- OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
- /* setup wakup source */
- omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
- OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
- WKUP_MOD, PM_WKEN);
- /* No need to write EN_IO, that is always enabled */
- omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
- OMAP3430_GRPSEL_GPT1_MASK |
- OMAP3430_GRPSEL_GPT12_MASK,
- WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Enable PM_WKEN to support DSS LPR */
- omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
- OMAP3430_DSS_MOD, PM_WKEN);
-
- /* Enable wakeups in PER */
- omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
- OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
- OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
- OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
- OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
- OMAP3430_EN_MCBSP4_MASK,
- OMAP3430_PER_MOD, PM_WKEN);
- /* and allow them to wake up MPU */
- omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
- OMAP3430_GRPSEL_GPIO2_MASK |
- OMAP3430_GRPSEL_GPIO3_MASK |
- OMAP3430_GRPSEL_GPIO4_MASK |
- OMAP3430_GRPSEL_GPIO5_MASK |
- OMAP3430_GRPSEL_GPIO6_MASK |
- OMAP3430_GRPSEL_UART3_MASK |
- OMAP3430_GRPSEL_MCBSP2_MASK |
- OMAP3430_GRPSEL_MCBSP3_MASK |
- OMAP3430_GRPSEL_MCBSP4_MASK,
- OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Don't attach IVA interrupts */
- if (omap3_has_iva()) {
- omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
- OMAP3430_PM_IVAGRPSEL);
- }
-
- /* Clear any pending 'reset' flags */
- omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
- /*
- * We need to idle iva2_pwrdm even on am3703 with no iva2.
- */
- omap3_iva_idle();
+ omap3_ctrl_init();
- omap3_d2d_idle();
+ omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
}
void omap3_pm_off_mode_enable(int enable)
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-20 01:05:25 +0000